Hangler Hladilni/Izolacijski/Osvežilni Servisni Zaboj nakup rabljenega (8)

Stanje: rabljeno, največja dovoljena obremenitev: 25.100 kg, skupna masa: 35.330 kg, konfiguracija osi: 3 osi, prva registracija: 03/2013, naslednji pregled (TÜV): 03/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, Leto izdelave: 2013, Oprema: ABS, PRVA ROKA, ODLIČNO STANJE HANGLER L13,6M B2,48M H2,65M POSEBNI POLPRIKOLICA ZA OBSTRANSKI VILIČAR, FIKSNA ALUMINIJASTA STREHA, PALICNI SISTEM ZA ZAVAROVANJE TOVORA, TEŽA SPREDAJ OB TLEH ZA OBSTRANSKI VILIČAR, STRANSKA STENA, DRSNA PONJAVA, ZADNJA OS SILJENO KRMILJENA, KRMILNA OS, ZRAČNO DVIGALO, BPW OSI ECOPLUS, ABS, KOLUTNE ZAVORE, TAKOJ PRIPRAVLJENO ZA UPORABO, LASTNA TEŽA 9900 KG Duodpfx Adsyd T Egsqjr Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: rabljeno, največja dovoljena obremenitev: 14.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2007, naslednji pregled (TÜV): 04/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.900 mm, Leto izdelave: 2007, Oprema: ABS, Od tal do vrha 4 m, prvi lastnik, Avstrija Dusdpfx Aoyd S I Hjdqjr

Stanje: rabljeno, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2012, Leto izdelave: 2012, Oprema: ABS, Trailer HANGLER 2 PEL 18 2-axle drop side with tarpaulin, sideboards with stanchion holders Unladen weight: 4,170 kg Payload: 13,830 kg Dedpfx Adjx Sbrxjqsur Condition: Excellent Tyres: 70-90%

Stanje: rabljeno, lastna masa: 8.450 kg, največja dovoljena obremenitev: 26.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Hangler ploščadni polpriklopnik 3 osi | vodilna os | BPW osi z disk zavorami | skupna masa 35.000 kg | nosilec rezervnega kolesa + rezervno kolo | orodjarna | izvlečno za 3 metre | pnevmatike: 385/65 R22,5 | Pridržujemo si pravico do napak, napačnih vnosov in predhodne prodaje. Duedpfewz Ekkjx Adqsr

Stanje: rabljeno, številka stroja/vozila: 8c9a877b63be8509f58298a74, lastna masa: 7.170 kg, največja dovoljena obremenitev: 25.830 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2007, velikost pnevmatike: 455/40 r22,5, Further information 2 VEHICLES AVAILABLE! – 2 VEHICLES AVAILABLE! – 2 VEHICLES AVAILABLE! – 2 VEHICLES AVAILABLE! Air suspension with lifting and lowering function, BPW disc brake axles, 2-speed landing gear with load compensation, 1 plastic toolbox, sliding roof, side curtain, double-wing rear doors, spare wheel holder without wheel, hazardous goods panel, "A"-sign, document tube, customs cord. 4 rows of aluminium insert slats, coil trough approx. 7,000 mm long, 2 rear impact buffers, warning panels according to ECE-070, tyres approx. 30–40% remaining tread. 2 VEHICLES AVAILABLE! – 2 VEHICLES AVAILABLE! – 2 VEHICLES AVAILABLE! – 2 VEHICLES AVAILABLE! Dsdsi Ri Akjpfx Adqsur

Stanje: novo, številka stroja/vozila: cd0062ee491e6794168ccb01a, lastna masa: 8 kg, največja dovoljena obremenitev: 26 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r 19,5, Further information Chassis Semi-Trailer In proven HANGLER welded construction, made of high-quality structural steel with longitudinal beams that taper towards the front and are welded using the submerged arc process. Neck height of the frame is 120 mm, with a double central web. Longitudinal beams have punched Z-profile cross members with floor sections (with greater spacing) and welded special side rails. 2 kingpins according to DIN 74080, replaceable, with grinding plate beveled to the front, made from high-grade steel sheet. EU turning radius in front: 2,040 mm. The grinding plate is continuously welded from the fifth wheel plate to the front wall plate (internally located). 18 pairs of lashing rings integrated into the outer frame, each rated for 2.5 t 8 pairs of lashing rings integrated into the outer frame, each rated for 5 t 24 t, 2-speed landing gear, single-side operation, straight lower section, without compensating device 2 wheel chocks with holders Side underrun protection in aluminum Plastic fenders with mud flaps Rear underrun protection Rear impact protection Spare wheel carrier for one spare wheel, including wheel mounting kit 3 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) Aluminum ladder, 3,300 mm, loose Pair of stake pockets recessed Removable stakes Storage compartment for plug-in slats, on one side in the left side member, below the loading area Storage compartment for drop sides, open, below the loading area, where technically feasible Coil trough / inclined loading device Coil trough 8,000 mm long with cover and rubber lining. Cover 35 mm. Inclined loading beams with bushings and supports suitable for FR 80/80/4, supplied with complete plug-in stakes 80/80, including lower reinforcement Hydraulic inclined loading device with 4 cross beams: Hydraulic supply via tractor unit using a 2-line pump system (supply and return) with dual Faster coupling mounted on the front wall (hoses are connected from below using Faster coupling). Inclined loading beams (FR 180x100x8 mm) with integrated extension, lockable at various heights. Multi-stage hydraulic cylinders, each beam with floating mounting. Including supports (adjustable) with bolt-locking under the loading area. 5-way control block for operating the inclined loading device and the retractable sliding roof. One set of kettle bottom holders with height-adjustable support bolts for different kettle bottom diameters, including storage. One piece protective stop for the inclined plate – for securing to the front! Axles and Suspension SAF disc brake axles Duodpfji Riw Hjx Adqer Axle spacing offset mm Air suspension Brake System 2-line compressed air brake system Aluminum air reservoirs Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, no connecting line EBS by Wabco, electronic braking system with EBS socket at the front, no connecting cable Note: The trailer may only be towed by tractor units which ensure the effectiveness of the ABS! With lift & lowering valve + auto-reset function Vehicle stability control system Wheels and Tires 435/50 R 19.5, manufacturer’s choice Factory silver steel rims, manufacturer’s choice Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, no connecting cable 1 additional LED work light at the rear, switched via reversing l

Stanje: novo, številka stroja/vozila: 087c7b6bc0c6118a84279fb46, lastna masa: 4.100 kg, Further Information Djdpfx Asi Riytodqeur Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, loading area tapered downward after the rear axle by approx. 8°. Longitudinal beams made from steel sections. Steel frame, hot-dip galvanized, with stainless steel sheet at the bend for cable guidance, flush with the platform floor. Suitable for trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Tow Coupling Tow coupling, ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including installation and electrics with 7-pin socket. Accessories/Conversions 2 brackets for wheel chocks, folding side underrun protection in aluminum – adopted from the truck! Rear under-run protection in steel, quarter shell fenders with mudflaps – adopted from the truck! Toolbox Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included). 1 holder for 3 fuel canisters. 1 stainless steel toolbox, w=600 / h=400 / d=500 mm, with polished door, lockable, includes control valve and electrohydraulic power unit. Controller box with peripheral door seal and sealing grommets at the rear (splash-proof as technically possible). Electrics Adaptation of existing taillights, 2 additional recessed LED work lights in the bulkhead, switched via parking light with switch outside on front wall, left side. 1 LED work light at the rear, with integrated reversing camera, including color flat screen monitor, monitor with suction cup mount and power supply via 24 Volt, voltage divider 24/12V, 1 x 7-pin 12V socket = plug adapter. Flooring Mega Grip made from serrated galvanized grating, steel floor gratings 50/4 including mesh size 50 mm. Top with anti-slip serrations, laid continuously over main frame platform. Lashing Points 12 pairs of swivel-mounted lashing rings in the outer frame – each 10 tons, first ring at the very front, last at the very rear. 1 lashing ring centrally at the rear for fastening winch cable. 12 lashing rings recessed in the floor, each 5 tons (not in rear bevel). Bulkhead Bulkhead made from sheet steel, height 1,500 mm. Fixed with corner posts at bulkhead height. Each with 2 x 12 hanging brackets for lashing chains mounted left and right on the bulkhead. Winch Electric cable winch, 24 Volt, pulling capacity approx. 6,350 kg, mounted centrally at the bulkhead (recessed with loading bridge), operated by radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, winch freewheel clutch, handheld control with approx. 5 m cable, winch acceptance certificate, civil engineer test report, logbook, and operating instructions. Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic power unit. Approach angle approx. 8° with lowered rear axle. Ramp platform made of galvanized steel grating (as platform floor), with anti-slip serrations. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulically. Ramps preconfigured for use at loading docks with full load capacity. Ramp locking with 2 lashing straps. Ramp tip stepped (nose min. 150 mm) for use at loading docks. Operating instructions included. Ramps lowering valve for ramp lowering. Support Adjustable support legs at rear, foldable and length-adjustable

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Dujdpfx Adjk Unitjqjr Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l