Stas 50 Cub Cereal nakup rabljenega (18.912)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2010, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2010, Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: Mercedes-Benz Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: LM platišča; profil pnevmatike levo: 5 mm; profil pnevmatike desno: 3 mm Zadnja os 2: LM platišča; profil pnevmatike levo: 5 mm; profil pnevmatike desno: 5 mm Zadnja os 3: LM platišča; profil pnevmatike levo: 2 mm; profil pnevmatike desno: 4 mm Hjdpfsy Il U Nox Ahpsfh Teže Lastna teža: 6.370 kg Nosilnost: 32.630 kg Skupna dovoljena masa: 39.000 kg Stanje Poškodbe: nobene

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical body in width) Unladen weight: only 7,275 kg Z-chassis, cranked version Continuous 5 mm Hardox steel HB450 floor Front and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, internal access ladder 2-wing rear portal doors, pneumatic remote unlocking 1 piece GRAIN SLIDE in the right door wing Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure ALU landing legs, full-load rated 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with traction aid WABCO Trailer-EBS with RSS rollover protection WABCO SmartBoard Automatic tip lowering Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Hfedpfx Ahsyy Hakspeh Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, and with us also available immediately in FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering function Hodsxriu Ejpfx Ahpofh Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL.

Stanje: rabljeno, največja dovoljena obremenitev: 34.928 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2024, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.280 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "AGRAR-LINER" First registration: 16.01.2024; Condition: like NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,280 mm (tapered design) Unladen weight: only 7,072 kg Z-chassis, cranked design Hodpsyv T Sxefx Ahpofh Continuous floor in 4 mm Hardox steel HB450 Front wall and side walls in 3 mm Hardox steel HB450 Angled front wall, interior access steps Double-wing combined doors with swinging function, pneumatic secondary unlocking 2 x grain discharge slides, each with 1x dust protection bag Reinforced roll-over roof tarp HYVA tipping cylinder, Alpha type, suitable for high & low pressure Full-load ALU landing legs 2x pneumatic vibrators underneath the superstructure SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with Rollover Stability Support (RSS) WABCO Smartboard Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Mounting holders for shovel and broom Toolbox on the right 4x LED reversing spotlights RENTING is the new BUYING: Full-service rental available immediately from us

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 90 m³, Leto izdelave: 2022, Oprema: ABS, Vehicle identification no.: YE6S300ZXN0000950 German MOT due FRAME: ALUMINIUM – Welded aluminium construction with additional reinforcement at axle mounts Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565/2,752 mm Side walls inside & outside smooth Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain design) Hjdpfx Asylfafohpsfh FLOOR BOARDS: 21 aluminium floor boards, 7 mm smooth, extremely durable with welded aluminium end caps Cramaro overquick with electric remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-operated landing gear Tyres: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel ALUMINIUM wheels Changes, prior sale and errors excepted. This description serves as general identification of the vehicle and does not constitute a warranty in the legal sense. The contractual description at the time of sale is binding. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we would be pleased to provide a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 50 m³, Chassis ALU chassis, aluminum alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminum parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability with integrated tipping bearing shaft fitted with wear-resistant special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated inside a plastic tube. Axles and Suspension Disc Brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension system, raising and lowering valve, load pressure gauge, third axle automatically liftable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread remaining, on silver steel rims, size 11.75x22.5 ET 120. Landing Legs Mechanical landing gears, load capacity 2 x 20 tonnes, with pivoting feet for use with air suspension systems. Brake System According to E.G. standard, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M with RSS (Roll Stability Support), ALU air reservoir. Electrical System According to StVZO regulations with 2 five-chamber Aspöck LED taillights, 24-volt system with two 7-pin and one 15-pin front sockets, EBS socket, side LED outline markers, 2 clearance lights, 2 separate LED reversing lights. Tipping Body/Tipper Body Aluminum tipper body, side walls with welded vertical aluminum profiles, approx. 6 mm floor of highly wear-resistant aluminum alloy (5383H34), Brinell HB 110, sloping front wall of 4 mm aluminum with reinforcing profiles for tipping cylinder bracket, side walls 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and wing door (2/3-1/3 split), with double hinge, made of 4 mm aluminum, single grain discharge slide with water protection, wear plates on the side approx. 400-1,000mm x 3,000mm x 4mm. Hydraulic System Hydraulic cylinder mounted on front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2m hydraulic hose and loose half 1". Accessories Hodpfjxf Spfex Ahpofh 6 Parlok plastic mudguards with 2 Stas mudflaps, 3 m aluminum ladder, reinforced collapsible underrun protection with 2 towing eyes, one foldable side guard, walkway on bulkhead with left-hand access ladder, 3 ALU bows with swing function, one central additional bow holder, roll tarp with central ALU tube, roll tarp system, tarp material quality approx. 660g/m², tarp fastener with quick-release catch (no tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous spray guard fitted on underrun protection, etc. Offer and pictures non-binding.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Hjdpoy U Syrsfx Ahpjfh Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 05/2012, prostornina tovornega prostora: 50 m³, skupna dolžina: 11.490 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.710 mm, barva: zelen, Leto izdelave: 2012, Oprema: ABS, = Additional Options and Accessories = - Alcoa Dura-Bright wheels - EBS (Electronic Braking System) - Rear doors - Lift axle - LED lights - LED work lights - Alloy rims - Air suspension - Sliding tarpaulin cover - SAF axles - Disc brakes = Notes = Stas S300CX Year of manufacture: 2012 50m³ BPW axles, disc brakes Tailgate/door combination Aluminum rims Tarpaulin cover Hjdpfx Ahsyxdhijpofh ABS/EBS Roadworthiness test (APK) valid until 05/2025 = Additional Information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Left tire tread: 60%; Right tire tread: 60% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Left tire tread: 60%; Right tire tread: 50% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Left tire tread: 60%; Right tire tread: 50% Weights Unladen weight: 6,570 kg Payload: 32,430 kg Gross vehicle weight (GVW): 39,000 kg Functional Tipper: Rear Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-56-RN = Company Information = Interested in financing this vehicle? Not a problem. We can quickly arrange a favorable finance lease contract for you with terms of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Hodpfjfakkcsx Ahpsfh Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Hjdpfx Ajyh S Aiohpofh Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Hfedpfx Ahefi Nmwepeh Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Hfodpfx Ahefi Nmpepjh Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Hfsdpfx Ahegcw Riopsh Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: dober (rabljeno), prevoženi kilometri: 374.947 km, moč: 368 kW (500,34 KM), prva registracija: 07/2019, vrsta goriva: dizel, velikost pnevmatike: 385/65R22,5, konfiguracija osi: 4x2, medosna razdalja: 4.800 mm, gorivo: dizel, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 8.680 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, dolžina tovornega prostora: 5.830 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.110 mm, Leto izdelave: 2019, Oprema: ABS, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, = Further Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (monitoring device) - Fixed (mounting) - Halogen headlamps - Hydraulic system - Manual (adjustment) - PTO (power take-off) - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric (seat material) Hodexmrqlepfx Ahpefh = Remarks = Number of axles: 2, configuration: 4x2, unladen weight: 9,445 kg, gross weight: 19,500 kg, total fuel tank capacity: 780 litres, trailer coupling, kingpin diameter: 40 DIN, fifth wheel: fixed, number of lock differentials: 1, suspension type: air suspension, cab type: sleeper cab, cruise control, tachograph (monitoring device), digital tachograph, air conditioning, auxiliary heating, electric windows, electric mirrors, radio/cassette, GPS navigation, colour: green, heated mirrors, type of lighting: halogen lamp, lane departure warning system, climate control, seat heating, Bluetooth, warning lights, engine power: 368 kW (493 hp), fuel: diesel, Euro standard: 6, transmission type: automatic, transmission model: ZF, gears: 12, power steering, ABS, ASR, hydraulic system, PTO, PTO type: 1, starter battery, number of sides: 1, pump, central locking, seat configuration: 1+1, seat covering: fabric, seat adjustment: manual = Further Information = Transmission Transmission: ZF, 12 gears, automatic Axle Configuration Brakes: disc brakes Axle 1: tyre size: 385/65R22.5; steering; left tyre tread: 14 mm; right tyre tread: 12 mm; suspension: leaf spring Axle 2: tyre size: 315/80R22.5; twin wheels; left inner tyre tread: 13 mm; left outer: 14 mm; right inner: 11 mm; right outer: 12 mm; suspension: air suspension Weights Unladen weight: 9,445 kg Payload: 10,055 kg gross vehicle weight (GVW): 19,500 kg Functional Loading platform height: 153 cm Pump: yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Lease price: €659 per month (default, 60 months); please ask for more information and terms Identification Registration plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognisable quality • Competitive pricing • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates issued quickly • Expert technical services • The reassurance of 'recognisable quality' • And more.... Visit our website for special deals and the full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Stanje: rabljeno, prevoženi kilometri: 520.337 km, moč: 330 kW (448,67 KM), prva registracija: 04/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2019, Oprema: klimatska naprava, navigacijski sistem, parkirni grelec, Whatsapp: _____ DAF XF 450 FT/Parking Heater/Standard/Super Space Cab/Alloy Wheels/TÜV:06.2026 ? Manufacturer: DAF ? Model: XF 450 FT ? Mileage: 520,337 km ? First registration: 04/2019 ? Power: 330 kW / 448 hp ? Transmission: Automatic ? Long-distance driver cab ? Suspension: Leaf/Air ? Wheel configuration: 4x2 ? 3-stage Intarder ? Navigation system ? Hill-start assist ? Blind spot assistant ? Lane departure warning system ? Traction control ? Differential lock ? Cruise control ? 2 beds ? Cruise control ? Refrigerator ? Differential lock ? Parking heater ? Roof air conditioning ? TÜV: 06/2026 ? Euro 6 ? Unladen weight: 7,717 kg Hfedpfey T Amysx Ahpoh ? Payload: 10,283 kg ? Permissible total weight: 18,000 kg ? German vehicle ? German documents ? Immediately ready for operation _____ You can also receive the description in another language by email. ? Our Service ? ? - Export declarations, customs processing, temporary yellow number plates, red transit number plates. ? - Purchase of your used construction machine or commercial vehicle ? - We assist you with financing ? - We offer transport solutions ? - Viewing and demonstration of machines Mon-Fri 9:00–17:00 (Saturday by appointment only) ? ? Our machine inventory is constantly changing and is always up to date on our website ? ? ? We are also happy to assist you by phone ? ? Sanisa GmbH ? Otto Hahn Straße 13 ? 35510 Butzbach ? ? Tel : ? Mobile: ? This offer is non-binding and subject to change. – Subject to prior sale, – Errors and/or typographical mistakes excepted. – Sale according to our terms and conditions.??

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Hodpfx Aogcw Rmjhpofh Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: rabljeno, lastna masa: 7.590 kg, največja dovoljena obremenitev: 28.410 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2021, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, STAS Moving Floor Trailer | Type S300ZX, Grain Hopper, Remote Control | 7mm Floor, Extreme Durabright | Toolbox with Air Hose, 2 Lift Axles | Air Suspension, Spare Wheel Holder | Unladen Weight: 7,590 kg, Payload: 28,410 kg | Tires: 385/65 R22.5 | Jost Axles with Disc Brakes Seller: Christopher Glock German/English Mobile: (Whatsapp) Email: christopher. Full Inventory at: Hofgasse 25, A-4063 Hörsching | Subject to error, input mistakes, and prior sale. | Sale to trade customers only Hodjwqqy Aopfx Ahpjfh

Stanje: rabljeno, največja dovoljena obremenitev: 34.127 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.149 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.822 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle HardoX Steel Tipper 55 cbm "X-Shape" First registration 10/2024, condition like NEW Mileage only 16,120 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight only 7,827 kg Z-chassis cranked design Continuous 5 mm HardoX steel HB450 floor Front and side walls: 4/3 mm HardoX steel HB450 Slanted front wall, internal access steps 2-wing portal doors, pneumatic remote unlocking Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure Crank-operated landing legs, full load support 2x air vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE with traction assist WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard Automatic tip lowering Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights Hfodpfx Aheyl Tgaspeh RENTING is the new BUYING, available immediately from us with FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 34.900 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2021, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.280 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.861 mm, Leto izdelave: 2021, Oprema: ABS, STAS 3-osovinski Hardox čelični kiper 55 cbm "AGRAR-LINER" Prva registracija 04/2021 Pređena kilometraža 203.910 km Hodpjy Nvrzofx Ahpefh Dimenzije unutrašnjosti (D x Š x V): 10.000 x 2.350/2.450 x 2.280 mm (konusni oblik) Sopstvena težina samo 7.100 kg Šasija u obliku slova Z, savijena izvedba Pod celom dužinom od 3 mm Hardox čelika HB450 Prednji i bočni zidovi od 3 mm Hardox čelika HB450 Kosi prednji zid, unutrašnji pristup sa stepeništem Jednokrilna ALU kombinovana vrata s klatnom funkcijom, pneumatsko odvajanje 1 komad klizni otvor za žito Krovna rolo cerada, ojačana izvedba HYVA kiper cilindar tip Alpha, pogodan za visok i nizak pritisak ALU sedlaste noge za potpuni teret 2x vazdušna vibratora ispod nadogradnje SAF osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO prikolica-EBS sa zaštitom od prevrtanja RSS WABCO Smartboard Uređaj za podizanje i spuštanje Pneumatici 385/65 R 22.5 Aluminijumske merdevine za pristup Držač za lopatu i metlu Kutija za alat sa desne strane 4x LED svetla za vožnju unazad IZNAJMLJIVANJE je nova KUPVINA, kod nas odmah dostupno i u FULL-SERVICE najmu-----

Stanje: rabljeno, največja dovoljena obremenitev: 34.130 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.149 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.822 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, Condition: Like NEW Mileage: 62,270 km Hfsdpfx Ahjyl Tfvspjh Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,820 kg Z-chassis in cranked design Continuous 5 mm Hardox steel (HB450) floor Front wall and side walls: 4/3 mm Hardox steel (HB450) Slanted front wall with internal ascent 2-wing portal doors, pneumatic post-unlocking GRAIN SLIDE with dust protection bag Reinforced roof roll tarpaulin HYVA tipping cylinder, Alpha type, suitable for high and low pressure Full-load crank landing gear 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer EBS with RSS anti-skid system WABCO Smartboard Automatic tipping lowering device Raise and lower mechanism Tires 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminum rims Aluminum access ladder Shovel and broom holder Toolbox on the right 4x LED reversing spotlights RENTING is the new BUYING: with us, immediately available also under FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 35.580 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2021, dolžina tovornega prostora: 10.485 mm, širina tovornega prostora: 2.474 mm, višina nakladalnega prostora: 1.895 mm, prostornina tovornega prostora: 49 m³, Oprema: ABS, STAS S300CX 49 m³ V uporabi od 5/2021 Dvižna os ADR: EXII, FL, OX, AT Nakladalna površina: 10.485 x 2.474 x 1.895 mm Medosna razdalja 1.410 mm Osi 9 ton SAF osi Kombinirana vrata Ponjava Kolutne zavore Pnevmatike 385/65 R22,5 Stanje: 1. os 10 mm 2. os 11 mm 3. os 12 mm Rezervna Lastna masa 6.420 kg Skupna masa 42.000 kg KOT NOVO – SAMO KMETIJSKI IZDELKI! Več informacij: Hfsdpfxew I Ivzo Ahpjh FB: Dvorak Trucks Czechia UVOZ-IZVOZ-PRODAJA-NAKUP-KOMISIONSKA PRODAJA TOVORNJAKOV IN GRADBENE MEHANIZACIJE SERVIS TOVORNJAKOV SERVIS PNEVMATIK TOVORNJAŠKA AVTOPRALNICA PREVERJANJE TAHOGRAFA

Stanje: rabljeno, lastna masa: 5.580 kg, največja dovoljena obremenitev: 31.220 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 08/2001, naslednji pregled (TÜV): 01/2027, prostornina tovornega prostora: 25 m³, skupna dolžina: 9.730 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 20 odstotek, Leto izdelave: 2001, Oprema: ABS, Bobnaste zavore, dvignljiva 1. os, krmiljena 3. os, aluminijasta platišča, aluminijasti prekucnik s prostornino 25 m³, zadnja nihajna vrata z zapiralnimi vzvodi in odprtino, vibrator, električno pokrivalo Marcolin. Hodpfszcpgqjx Ahpofh

Stanje: rabljeno, lastna masa: 6.580 kg, največja dovoljena obremenitev: 29.420 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2001, prostornina tovornega prostora: 45 m³, velikost pnevmatike: 385/65R22,5, STAS S3-SA336K 3-osna kesonska prikolica, aluminijasta platišča, dimenzija pnevmatik 385/65 R22,5, dvižna os, strešna ponjava, podest z lestvijo, portalna vrata, žitni drsnik, daljinsko upravljanje. Prodaja izključno pravnim osebam, brez kakršne koli garancije. Možne so napake in vmesna prodaja. Hedpfx Ahjy N Tpwopsfh

Stanje: rabljeno, največja dovoljena obremenitev: 32.447 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, STAS 3-osý Hardox oceľový sklápací náves 86 m³ Prvá registrácia 01/2023, od prvého majiteľa Najazdených 171 700 km Vnútorné rozmery (d x š x v): 13 110 x 2 350/2 450 x 2 770 mm (konická konštrukcia) Prevádzková hmotnosť: 9 640 kg Podlaha z jedného kusa 5 mm Hardox ocele HB450 Predná stena a bočné steny z 3 mm Hardox ocele HB450 Pneumaticky sklopná zadná spodná zábrana Rovná predná stena, vnútorný výstupný rebrík Zadné portálové dvere 50:50, pneumatické diaľkové odistenie HYVA vyklápací piest typ Alpha, nízkotlakový 2x pneumatický vibrátor JOST kľukové sedlové opory s plnou nosnosťou SAF nápravy s veľkými 430 mm kotúčovými brzdami 1. náprava zdvíhacia náprava WABCO prívesová EBS so stabilizačným systémom RSS WABCO Smartboard Zdvíhacie a spúšťacie zariadenie Automatické zníženie pre sklápanie Pneumatiky: 6x 385/55 R 22.5 ALCOA disky z lešteného hliníka Dura-Bright Hliníkový rebrík Držiak na lopatu a metlu Hfjdpjzahunsfx Ahpjh Náradový box vľavo 4x LED cúvacie svetlá PRENÁJOM je novým NÁKUPOM – u nás okamžite dostupný aj ako full-service prenájom

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 68 m³, Leto izdelave: 2026, Oprema: ABS, Material podvozja: jeklo Tip podvozja: Z-podvozje Obremenitev kraljevskega zatiča: National 12 t Dovoljena osna obremenitev: National 8 t Medosna razdalja (mm): 1.310-1.310 Višina sedla (mm): 1.150 Širina podvozja (mm): 1.400 Širina nakladanja (mm): 2.325 Notranja višina spredaj (mm) (IHF): 2.460 Notranja višina zadaj (mm) (IHB): 2.460 Dolžina nakladanja (mm): 11.744 Skupna širina (mm): 2.550 Medosje (mm) (WB): 7.753 Skupna dolžina (mm): 13.148 Osi, zavore in vzmetenje Osi: SAF Različica osi: Intra Tip zavore: SAF - SBS 2220 OD (enprésna globina): 120 Opcija: 1. os z dvižno osjo in pomočjo pri speljevanju Aktivacija pomoči pri speljevanju: gumb v kabini tovornjaka in s 3-kratnim pritiskom na zavorni pedal Opcija: 3. os z dvižno osjo Indikator obrabe zavornih oblog ni priključen Zaščitna plošča zračnih mehov Zračno vzmetenje ECAS z dvigovalnim in spuščalnim ventilom Avtomatsko spuščanje zračnega vzmetenja pri kipanju, ročno blokiranje preko Smartboarda ter stikalo na podvozju Pnevmatska spojka: evropska Palm spojka Kontrolna konzola: EBS upravljanje na levi strani v smeri vožnje, pred osmi, tip Smartboard Zračna in električna konzola na desni v smeri vožnje Podporne noge tipa JOST MODUL 385/65R22.5 Nadzor tlaka v pnevmatikah: Wabco Trailerpulse Tip TPMS senzorja: platiščni senzor Dobavitelj TPMS senzorjev: ZF Kromirane kapice za matice koles Tip osvetlitve: ECOLED III 2x LED vzvratna luč zadaj, levo in desno v smeri vožnje 2x LED vzvratna luč spredaj, levo in desno v smeri vožnje, v območju podpornih nog Upravljanje podvozja pod odbijačem ročno Kljuka za vleko: 1 kos, levo v smeri vožnje Znamka kiperskega cilindra: Hyva Tip kiperskega cilindra: Cilinder z majhnim plaščem Kotni nagib cilindra: normalno ±47° Model kiperskega cilindra: Hyva - FC 169 Hod cilindra: 8.130 Maksimalni PTO tlak: 250 Hidravlična spojka: rotacijska spojka Hidravlična spojka - velikost: 1 Hidravlična spojka - spol: ženska Hidravlična spojka - cev: 2.100 mm Orodjarna: plastika Položaj orodjarne: levo v smeri vožnje, pred osmi Dimenzija orodjarne – levo pred osmi: 830x500x470 Aluminijasta naslonska lestev, dolžina 2,8 m, desno 3x držalo za metlo in lopato na čelni steni, levo v smeri vožnje Manometer za obremenitev Ø 100 mm – spredaj na podvozju Dva plastična klinasta podstavka Nagib čelne stene (°): 20 Nagib zadnje stene (°): 90 Čelna stena iz 3 mm HB450 Stranske stene iz 4/3 mm HB450 Tla iz 5 mm HB450 Položaj gumijastih podlog: nameščeni pod prečkami tal Zadnja stena: tip krilna vrata Zadnja stena iz 3 mm HB450 Število tečajev zadnjih vrat: 3 para vratnih tečajev Izvedba krilnih vrat: delitev 1/2 na 1/2, z 1 kosom zapahom za kose Odpiranje krilnih vrat: najprej desno Hedpfxozctkgs Ahpjfh Zaklop: pravokotna izvedba s poliamidnim vodilom Položaj zaklopa: 1 kos desno Pritrditev odprtih krilnih vrat: z verigo Tesnilo zadnje stene: z gumijastim tesnilom v spodnjem predelu, ob strani 500 mm Dodatno zapiranje zadnje stene: pnevmatsko, dvojnodelujoče Upravljanje dodatnega zapiranja: ročno, s stranskim upravljanjem ob armaturnem nosilcu Izvedba ponjave: navojna letvica Tip prečke: jeklene, trapezne oblike, zložljive Število in položaj prečk: 3 sredinske prečke, enakomerno porazdeljene po celotni nakladalni površini Držala za ponjavo: vrtljiva izvedba, snemljiva Število držal za ponjavo: 3 Položaj držal za ponjavo: na desni stranski steni Podpora za čelno ponjavo: trapezna