Schwarzmüller Rh240 Jumbo Plateau Tieflader Ausziehbar nakup rabljenega (1.492)

Stanje: rabljeno, največja dovoljena obremenitev: 25.660 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, Leto izdelave: 2022, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader, daily registration Extendable and telescopic – ideal for the transport of construction materials and construction machinery - As-new condition - Gross vehicle weight: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatically lockable, controlled at trailer + additional position for 40ft container in deep deck Reinforced version for transporting building materials, rated for 20 t on 5 m at the center of gravity and for construction machinery transport up to 20 t Frame suitable for transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads front and rear with mounting block Reinforced outer frame at gooseneck platform 6 mm Reinforced outer frame in low deck 6 mm Tapered crossbeams Movable intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stanchion crossmember for box-section stanchions 80x80 mm, and 1 pair of 5 t lash rings integrated externally in the intermediate support Frame for 2-axle tractor unit, coupling height unladen approx. 960 mm – 1,020 mm (air-suspended tractor) Lajdpfx Agju A Nhno Eof Front: 3 pairs and rear: 10 pairs of 10 t pull-out lashing rings in the outer frame, both sides, can also be folded outwards for oversized-width lashing 10 pairs of lashing mushrooms with welded round bar at lower outer frame Frame attachments: 10 pairs of socket housings with reinforcement for box-section stanchions 80x80 mm, both sides of the outer frame 6 stanchion crossmembers for box-section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes for tie-down strap, hot-dip galvanised 3 pairs of container locks in the low deck platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container when fully extended U-profile ramp rail at rear frame end Support equipment: Mechanical steel landing gear, 2 x 12 t 2 drop-down supports, rear, both sides of frame Wheels: Tyres: 205/65 R 17.5 Steel rims: 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electropneumatic automatic reverse lock via reverse gear Last axle is steerable trailer axle Braking/Suspension: Brake system by Wabco Brake/air connectors with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting and lowering device, total stroke approx. 200 mm Automatic levelling to programmed driving height from 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes when ignition is on Every 24 hours when ignition is off Axle load indicator via EBS CAN bus signal, display in cab (truck must be appropriately enabled) Wabco SmartBoard for reading out data via display (mileage, axle module load, brake diagnosis, etc.) Floor: 35 mm larch timber floor, both sides impregnated, longitudinally laid with small gaps, over wheels with steel chequer plate covers Front wall: Fixed profiled steel front bulkhead, approx. 2,700 mm high with 2 center supports 2 front corner posts, integrated in front wall, bolted at front 2 lashing eyes each on top of the front

Stanje: novo, skupna masa: 36.700 kg, konfiguracija osi: 3 osi, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader extendable telescopic – for building material and construction machinery transport - NEW - UNUSED - gross vehicle weight: 36,000 kg empty weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in the low-bed area (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, operated from the trailer plus an additional position for a 40ft container in the low-bed area Reinforced design for building material transport, rated for 20 t on 5 m at the center of gravity and for machine transport up to 20 t Frame suitable for transporting timber construction parts L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at the front and rear with support block Reinforced outer frame in cranked platform, 6 mm Reinforced outer frame in the low-bed area, 6 mm Tapered crossmembers Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket crossmember for box section stanchions 80x80 mm, as well as 1 pair of 5 t load securing rings integrated on the outside of the intermediate support Frame suitable for 2-axle tractor unit (SZM), saddle height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs and rear: 10 pairs of 10 t lashing rings in the extendable outer frame, on both sides, can also be folded outward for oversize load securing 10 pairs of lashing mushrooms with welded-in round steel at the bottom outer frame Frame Equipment: 10 pairs of plug-in housings with reinforcement beams for box section stanchions 80x80 mm, on both sides of the outer frame 6 stake pocket crossmembers for box section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container when extended U-profile rail for ramp installation at rear frame end Support Device: Mechanical steel landing legs, 2 x 12 t 2 drop-down supports, both sides on rear frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reversing lock automatically activated in reverse gear Last axle steering Laodpfeu A Nilsx Ag Esf Brake System/Suspension: Brake system manufacturer: Wabco Brake/air connections with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting/lowering device, total lift approx. 200 mm Automatic adjustment to programmed ride height from 15 km/h Assistance & Safety Systems: Standard reporting interval: every 15 minutes when ignition is on every 24 hours when ignition is off Axle load display via EBS-CANbus signal for display in cab (truck must be appropriately equipped) Wabco SmartBoard for data readout via display (mileage, axle load unit, brake diagnostics etc.) Floor: 35 mm larch wood flooring, impregnated on both sides, laid longitudinally with small gaps, over-wheel areas with steel chequer plate covering Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Ljdpfxoy Auhnj Ag Eeaf Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, lastna masa: 6.580 kg, največja dovoljena obremenitev: 27.420 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2011, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Letnik 2011 | Nosilec rezervnega kolesa | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | Pridržujemo si pravico do napak in predhodne prodaje. Lajdpjzn U Ddsfx Ag Eof

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVYS1339RD526996, lastna masa: 5.910 kg, največja dovoljena obremenitev: 30.090 kg, skupna masa: 36.000 kg, konfiguracija osi: 4x2, prva registracija: 07/2024, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: črn, Leto izdelave: 2024, Oprema: ABS, our vehicle number #30370 3x SAF axles Tyre size 385/65 R 22.5 Permissible gross weight 36,000 kg Payload 30,090 kg Unladen weight 5,910 kg Body dimensions inside L: 13,000 mm W: 2,500 mm Colour: black Lifting axle Disc brakes 8 pairs of Eco stanchions 8 pairs of lashing brackets Front wall height 2,500 mm air suspension SWIT – Schwarzmüller Intelligent Telematics reinforced axles side underrun protection spare wheel holder toolbox Jost landing legs 5x towing hooks at the rear Lsdpfowuq Ibex Ag Eoaf floor plate LED tail lights ABS EBS Financing available upon request!!!

Stanje: rabljeno, največja dovoljena obremenitev: 30.380 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, Oprema: ABS, Vehicle Identification No.: VAVX99448BH301318 Including ALU ramps – 2,800 mm long, 400 mm wide Unladen weight: 9,620 kg German MOT due Gooseneck: 4,000 mm Low-bed: Length: 8,620 mm Ljdpfott U D Dsx Ag Eoaf Width: 2,550 mm Loading height: 930 mm Removable rails Support legs Width extension lighting Max. fifth wheel load at front: 12,000 kg Swing clearance radius: front 2,100 mm - rear 1,900 mm Axle loads (technical): 4 x 7,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable Axles 3 + 4 = trailing steered 2 x toolboxes Tyres: 245/70 R 17.5 Changes, prior sale and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The description in the purchase contract is binding. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, lastna masa: 5.100 kg, največja dovoljena obremenitev: 12.900 kg, prva registracija: 03/2014, naslednji pregled (TÜV): 04/2025, skupna dolžina: −1 mm, skupna širina: 25.500 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 245 / 70 R 17.5 / 8mm, velikost sprednje pnevmatike: 245 / 70 R 17.5 / 8mm, obratovalna teža: 18.000 kg,

Stanje: rabljeno, največja dovoljena obremenitev: 17.640 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2015, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 8.355 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.600 mm, Leto izdelave: 2015, Oprema: ABS, Good condition Lsdpfx Ajy Dmuveg Eoaf

Stanje: rabljeno, največja dovoljena obremenitev: 14.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2015, Leto izdelave: 2015, Oprema: ABS, Jumbo prikolica Schwarzmüller s platformo in stranskimi deskami Laedpfx Aex Sbwzog Ejf

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, 4-AXLE LOW LOADER SEMITRAILER WITH CRANKED PLATFORM Tractor unit data and equipment: 3-axle tractor unit Please check saddle height under the "Dimensions" section! Ledpfx Agou Uzv Ee Eoaf No modifications to the tractor unit required Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum clear front distance from fifth wheel coupling center 2,230 mm = maximum rear turning radius Tractor unit suspension type: air suspension Gross train weight (permitted): 40 t Gross weight (technical): 58 t Axle unit load (technical): 40 t Saddle load (technical): 18 t Approx. 3,500 mm = front cranked platform Approx. 7,970 mm = low bed platform – level loading area Approx. 730 mm = rear ramp slope Overall width approx. 2,550 mm (approx. 3,000 mm with extensions) Loaded loading height approx. 870 mm Unloaded loading height approx. 900 mm With unloaded saddle height approx. 1,250 mm For combined vehicle operation, please observe legal total height and total train length limits! Welded steel construction with front inclined frame crank and rear incline (without central excavator shovel recess) 5 pairs of lashing pockets in the low bed for box stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t lashing rings on the cranked platform 7 pairs of recessed, retractable 5t lashing rings (10t technical pull force) in the low bed + 1 pair folding, between 2nd and 3rd axle 1 pair of recessed, retractable 10t lashing rings on front crank slope Pair of recessed, foldable 10t lashing rings on the inside of side member after 2nd axle 1 pair of recessed, foldable 10t lashing rings on the inside of side member after front crank Interchangeable 2" king pin 5 pairs of steel box stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion securing by pressure actuation # Permissible stanchion load 1,000 kg per stanchion with load application point 500 mm above ground Both sides of the low bed platform with extendable widening elements with 50 mm softwood planking (track width of the construction machines to be transported must not exceed outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation (right), load compensation, manufacturer at factory’s discretion 2 hydraulic supports at rear – individually operable, controls housed in a separate stainless steel box AF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake slack adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as stub axle/friction-steered SAF trailing axles, approx. 20° steering angle, electro-pneumatically controlled reverse lock automatically activated via reverse gear, also switchable from the cab and with release valve on the trailer Start-assist on 1st axle = speed-limited pressure relief, unloadable when loaded, actuation via button in cab Mechanical odometer mounted on 2nd axle, right side in driving direction 16 pcs. Tires 245/70 R 17.5, 146/146F (tire load capacity 12t/axle) 16 pcs. Steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12t/axle) 1 pc. Tire 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity 12t/axle) 1 pc. Steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package ... further details on request! Export pla

Stanje: rabljeno, največja dovoljena obremenitev: 30.250 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2014, Oprema: ABS, Schwarzmüller Platform Flatbed Semi-Trailer with Lift Axle Permissible total weight: 36,000 kg Unladen weight: 5,750 kg Payload: 30,250 kg SAF axles 1st axle lift axle Air suspension Disc brakes Laodpfjwqyrhsx Ag Ejf Side underrun protection right, left, and rear 2x storage compartments right 1x storage compartment left Rear rubber buffer 2x extendable oversize load signs front 2x extendable oversize load signs rear 2x crank support legs, operable from the right EBS (Electronic Braking System) ABS (Anti-lock Braking System) Perforated outer frame with approx. 100 mm hole spacing Wheelbase: approx. 6,350 + 1,310 + 1,310 mm External dimensions LxW: approx. 13,840 x 2,550 mm Loading area LxW: approx. 13,620 x 2,480 mm Front wall height: approx. 2,400 mm Loading height: approx. 1,250 mm Tyres: 385/65R22.5 Tread depth left front: 4 mm Tread depth left centre: 16 mm Tread depth left rear: 8 mm Tread depth right front: 5 mm Tread depth right centre: 15 mm Tread depth right rear: 10 mm Additional Features: Reinforced steel frame welded construction for point load 20 t over 4 m at centre of gravity, frame for ASH unladen 1,090–1,190 mm with air-suspended tractor unit, interchangeable 2" king pin (EC installation dimensions, corner spacing 2,040 mm) Perforated outer frame with approx. 100 mm hole spacing, elongated hole 40/25 mm according to DIN EN 12640 Air suspension with lifting and lowering device (approx. +120/-80 mm) Automatic ride height adjustment from 15 km/h SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, Ø 430 mm, 3 x 9 t rigid axles, wheelbase 2 x 1,310 mm Front axle automatically liftable = 2-side lift (1 x 96307) raises and lowers automatically based on weight (lifting the axle increases the loading or overall height by approx. 50 mm) with forced lowering including integrated speed-restricted starting aid for pushbutton operation in cab (without pushbutton fitted) 1 odometer (ECO-meter) (KIT no. 10801, with hubcap KIT no.: 52917) (on 2nd axle front right) Mechanical 2 x 12 t support winches, one-sided operation and load distribution mechanism Two-line brake system EBS-E – electronic braking system (Wabco 2S2M = one axle, 2nd axle monitored) RSS – roll stability support program Spring-loaded parking brake on 2 axles Aluminium air tank, unpainted 27 mm phenolic plywood flooring, flush with outer frame 2 steel hat profile rails over longitudinal beams, additional 12 mm phenolic overfloor, bevelled to outer frame Fixed aluminium hollow profile front wall 2,400 mm high with 2 centre supports

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339PH522406, lastna masa: 8.520 kg, največja dovoljena obremenitev: 30.480 kg, skupna masa: 39.000 kg, prva registracija: 01/2024, dolžina tovornega prostora: 13.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, barva: rumena, Leto izdelave: 2024, Oprema: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forced-steered Vehicle identification number: VAVJS1339PH522406 Mileage: 7,700 km - Weights Laedpsxq S H Iefx Ag Esf Gross weight (technical): 39 t Axle group load (technical): 27 t Kingpin load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm FRAME - welded steel frame construction - reinforced for 20 t load concentration over 4 m loading length - frame height at front approx. 230 mm - interchangeable 2" kingpin - frame for unladen fifth wheel height approx. 1,120 mm to 1,200 mm with air-suspended tractor unit - 4 mm perforated outer frame with hole spacing approx. 100 mm, elongated hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, also can be folded outward - 8 pairs of box section inserts with plug-in fixtures for 80x80 mm stanchions, both sides of the outer frame - 6 box section inserts with plug-in fixtures for 80x80 mm stanchions, across entire width, max. tensile force 2000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axle with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Self-acting forced steering, front fifth wheel turntable with steering wedge - Transmission via two steering rods, axle mounting at rear with bogie - Central lubrication points for steering at front fifth wheel turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on load, start-off aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensing - RSS/RSP stability program - Spring brake parking brake on 2 axles - Aluminium air reservoirs - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle group load, brake diagnosis, etc.) FLOOR - 27 mm phenolic plywood floor with steel hat-profile rails over the longitudinal members - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard rail bolted both sides to the outer frame - Aluminium forklift guard rail at rear crosswise - Closed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, for loads up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel toolbox / lid painted in single colour - 8 removable hardwood cross beams approx. 100/100 mm, with steel edging, can be fixed in plug-in fixtures in the outer frame Very good condition, German registration papers, immediately available.

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm Laodpfjxu Nnwjx Ag Eef * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Fliegl SDS410 nizkopodna prikolica s stranskimi platni, tip Jumbo, za prevoz viličarjev. 1. os: dvižna os / 3. os: usmerjena SAF bobnaste zavore Nakladalna rampa / EcoLift – dvižna streha / Razširitev zadnjega podvoja Dovoljena skupna masa: 39.000 kg, Lastna masa: 11.500 kg, Nosilnost: 27.500 kg, Višina sedla brez obremenitve: pribl. 1.185 mm, SAF osi, 1. os: dvižna os, 3. os: usmerjena, (z avtomatskim sistemom za preprečevanje neželenega premikanja med vzvratno vožnjo, ki se aktivira preko luči za vzvratno vožnjo in dodatne funkcije blokade, ki se upravlja na vozilu s pomočjo gumba) Zračna vzmetenje, Bobnaste zavore, Zavorna sistema HALDEX, Edscha ponjava, EcoLift – dvižna streha, ki se lahko dvigne za pribl. 380 mm, na obeh straneh, s pomočjo plinskih vzmetnih blažilnikov, Mehanska razširitev zadnjega podvoja za 400 mm na vsaki strani, za lažje nakladanje in razkladanje, Stranska platna – drsna, Podvozni ščit na levi, desni in zadnji strani, 2x podpirala s ročico spredaj, 2x podpirala s pločevino zadaj, 2x LED luči za vzvratno vožnjo zadaj, 2x predal na levi, 1x predal na desni, Zračni priključek – sklopka (rdeča + rumena), 2x 7-polni vtič, ABS, EBS, ALB, Pripajalna letev na sredini, Nakladalne rampe – valovita pločevina in rešetasta pločevina, Označba za presežno širino spredaj in zadaj, 9x pritrdilnih točk + 7x pritrdilnih lukenj na vsaki strani (nizkopodna prikolica), 4x pritrdilnih točk + 2x pritrdilnih lukenj na vsaki strani (gosi vrat), Medosjna razdalja: 6.450 + 1.330 + 1.800 mm, Zunanje mere: 14.100 x 2.550 x 4.000 mm, Nosilec za rezervno kolo, vključno z rezervnim kolesom, Pnevmatike: 235/75R17,5 na jeklenih platiščih, Globina profila pnevmatik – leva stran – spredaj – zunanja stran: 8 mm, Globina profila pnevmatik – leva stran – spredaj – notranja stran: 8 mm, Globina profila pnevmatik – leva stran – sredina – zunanja stran: 7 mm, Laedpfxozvz T Ie Ag Esf Globina profila pnevmatik – leva stran – sredina – notranja stran: 8 mm, Globina profila pnevmatik – leva stran – zadaj – zunanja stran: 7 mm, Globina profila pnevmatik – leva stran – zadaj – notranja stran: 11 mm, Globina profila pnevmatik – desna stran – spredaj – zunanja stran: 8 mm, Globina profila pnevmatik – desna stran – spredaj – notranja stran: 7 mm, Globina profila pnevmatik – desna stran – sredina – zunanja stran: 8 mm, Globina profila pnevmatik – desna stran – sredina – notranja stran: 7 mm, Globina profila pnevmatik – desna stran – zadaj – zunanja stran: 7 mm, Globina profila pnevmatik – desna stran – zadaj – notranja stran: 7 mm, Dodatna oprema: Skupna dolžina: pribl. 13.800 mm, Skupna širina: maks. 2.550 mm, Skupna višina: pribl. 4.000 / 4.040 mm, Dolžina gosjega vratu: pribl. 4.050 mm, Notranja dolžina nizkopodnega dela, vključno z naklonom zadaj: pribl. 9.500 mm, Notranja širina: pribl. 2.480 mm, Stranska višina nizkopodnega dela: pribl. 3.000 mm, Notranja višina gosjega vratu: pribl. 2.590 mm, Višina nakladanja v nizkopodnem delu: pribl. 920 mm, Višina sedla: pribl. 1.200 mm, Sprednja širina kota: pribl. 2.040 mm, Podvozje Jumbo – prikolica s sedlom: Za prevoz gradbenih strojev do 32.000 kg, Nakladalna plošča zgoraj zaprta s jeklom/valovito pločevino, Zadnji podporni sistem, zložljiv, Bočni zaščitni elementi iz aluminija, Nosilec za rezervno kolo za 1 rezervno kolo, s setom za pritrditev kolesa, Omega letve v nizkopodnem delu na spodnji strani zunanjega okvirja, Pritrdilne točke – gosi vrat: 4 pari 5-tonskih pritrdilnih točk, vgrajenih v zunanji okvir, 2 pari pritrdilnih ušes

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65 R 17,5, velikost zadnje pnevmatike: 205/65 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vlečna cev izvlečna do cca 3.850 mm, zaklep pri cca 1.000 mm, 2.000 mm, 3.000 mm ali 3.850 mm, nakladalna višina pod obremenitvijo cca 800 mm, notranja širina vozila cca 2.530 mm, na sredini 4 x žep za vstavne količke 100 x 50, 8 x žep na zunanjem okviru, 4 x pritrdilne zanke po 5,3 t, zunanji okvir z pritrdilnimi očesi, 4 x opozorilne table z osvetlitvijo, snemljiva okoliška luč zadaj, označevanje obrisa in bočna zaščita pred trkom, zadnje blatnike in preprečevanje razprševanja, -- pridržujemo si pravico do tiskarskih napak, sprememb, slike so simbolične --, Več podatkov pod: !, More Details: ! Lodjztnu Hepfx Ag Eoaf

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65 R 17,5, velikost zadnje pnevmatike: 205/65 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vlečno drogo izvlečno do pribl. 3.850 mm, zaklep pri pribl. 1.000 mm, 2.000 mm, 3.000 mm ali 3.850 mm, višina nakladanja obremenjeno pribl. 830 mm, notranja širina vozila pribl. 2.530 mm, na sredini 4 žepki za vložne stebričke 100 x 50, 8 žepkov za stebričke v zunanjem okviru, 4 pritrdilne zanke po 5,3 t, zunanji okvir z zankami za privezovanje, 4 opozorilne table z osvetlitvijo, zadnja opozorilna rotacijska luč, snemljiva, označba obrisa in bočna zaščita, zadnji blatniki in preprečevanje pršenja vode, -- tiskarske napake, napake in spremembe pridržane, vzorčne slike --, Več podatkov pod: !, More Details: ! Ljdpszr Ugtefx Ag Eeaf

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 10.300 kg, skupna masa: 13.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65 R 17,5, velikost zadnje pnevmatike: 205/65 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vlečno drogo izvlečno do pribl. 3.850 mm, zaklep pri pribl. 1.000 mm, 2.000 mm, 3.000 mm ali 3.850 mm, višina nakladanja obremenjeno pribl. 830 mm, notranja širina vozila pribl. 2.530 mm, na sredini 4 žepki za vložne stebričke 100 x 50, 8 žepkov za stebričke v zunanjem okviru, 4 pritrdilne zanke po 5,3 t, zunanji okvir z zankami za privezovanje, 4 opozorilne table z osvetlitvijo, zadnja opozorilna rotacijska luč, snemljiva, označba obrisa in bočna zaščita, zadnji blatniki in preprečevanje pršenja vode, -- tiskarske napake, napake in spremembe pridržane, vzorčne slike --, Več podatkov pod: !, More Details: ! Lodpfx Aozrqlrsg Eeaf

Stanje: novo, lastna masa: 3.600 kg, največja dovoljena obremenitev: 10.300 kg, skupna masa: 13.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 205/65 R 17,5, velikost zadnje pnevmatike: 205/65 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vlečna cev izvlečna do cca 3.850 mm, zaklep pri cca 1.000 mm, 2.000 mm, 3.000 mm ali 3.850 mm, nakladalna višina pod obremenitvijo cca 800 mm, notranja širina vozila cca 2.530 mm, na sredini 4 x žep za vstavne količke 100 x 50, 8 x žep na zunanjem okviru, 4 x pritrdilne zanke po 5,3 t, zunanji okvir z pritrdilnimi očesi, 4 x opozorilne table z osvetlitvijo, snemljiva okoliška luč zadaj, označevanje obrisa in bočna zaščita pred trkom, zadnje blatnike in preprečevanje razprševanja, -- pridržujemo si pravico do tiskarskih napak, sprememb, slike so simbolične --, Več podatkov pod: !, More Details: ! Lodszrqhyopfx Ag Esaf

Stanje: rabljeno, največja dovoljena obremenitev: 38.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1994, dolžina tovornega prostora: 12.400 mm, Oprema: ABS, Broshuis 3-osni nizkopodvozni prikolica s podaljškom, zadnji del je nagnjen. Zračna vzmet, dvig in spuščanje, ABS, 235/75R17,5. Krmiljena zadnja os, pritrdilne točke, osi SAF, Ljdpfjzp S Ngjx Ag Esaf orodjarna, dvojne pnevmatike, višina tovornega prostora približno 85 cm. Rezervno kolo... =====Nemška registracija + 1 lastnik===== ==Vsakodnevni odkup gospodarskih vozil, možen tudi odkup s popustom== Podrobna predstavitev vozila // Podroben ogled vozila: ?v=x7Mv6D3WL5c&feature= . Cena 8.500,00 EUR neto.

Stanje: novo, lastna masa: 4.400 kg, največja dovoljena obremenitev: 19.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 8.795 mm, Oprema: ABS, | Krone AD Jumbo plato prikolica 3-osna Nova | Multilock zunanji okvir po celotni dolžini | Zračno vzmetenje spredaj in zadaj (dviganje/spuščanje) | Vrtljivo podvozje z krožno kroglo, nizko vzdrževalni vrtljivi venec | Vlečna ušesa 40 mm | BPW osi z bobnastimi zavorami | Nosilec za rezervno kolo | Dimenzije (D x Š x V): 8,60 x 2,48 x 0,93 m | Jeklena čelna stena 1,60 m | Medosna razdalja: 8.795 mm | Pnevmatike 12x spredaj/zadaj: 235/75 R 17,5 | Pridržujemo si pravico do napak, vnosov in predhodne prodaje. Ljdpfxey H Ilzo Ag Esaf

Stanje: rabljeno, lastna masa: 8.450 kg, največja dovoljena obremenitev: 26.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Hangler ploščadni polpriklopnik 3 osi | vodilna os | BPW osi z disk zavorami | skupna masa 35.000 kg | nosilec rezervnega kolesa + rezervno kolo | orodjarna | izvlečno za 3 metre | pnevmatike: 385/65 R22,5 | Pridržujemo si pravico do napak, napačnih vnosov in predhodne prodaje. Laedjwz Ekkepfx Ag Esf

Stanje: rabljeno, največja dovoljena obremenitev: 33.525 kg, skupna masa: 46.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2008, Leto izdelave: 2008, Oprema: ABS, Proizvajalec: Kel-Berg / Faymonville Model: 4-osna strojna prikolica z izvlekom 3 m Leto: 2008 Stanje: Dobro Serijska številka: SKBE58S407KE12547 Ref. št.: 7972 Datum registracije: 30-04-2008 Bobnasta zavora: ? ABS: ? Zadnje osi: SO F Vzmetenje: Zračno Velikost pnevmatik: 235/75R17,5 Ostalo profila: 30-50% Škatla za orodje: ? Skupna masa: 46000 kg Lastna teža: 12575 kg Nosilnost: 33425 kg Notranja dolžina: 8,75 m / 12,10 m Laedpsxa Tdmofx Ag Eof Izvlek: 3 m Prisilno vodene osi: 3+4 Hidravlične rampe: ? Hidravlična zadnja podporna noga: ?

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Lasdpfjllwhnex Ag Ejf Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. plus freight/preparation ex stock Wiesmoor €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.000 kg, največja dovoljena obremenitev: 22.000 kg, skupna masa: 29.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.170 mm, skupna dolžina: 11.700 mm, skupna širina: 2.550 mm, skupna višina: 2.650 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Konfigurirajte Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni željam strank. Dodatne informacije Podvozje Varjena konstrukcija iz drobnozrnatega jekla, sedelna plošča z zamenljivim 2. zatičem (kraljevski zatič), z dvema položajema zatiča Zunanja šasija rahlo stožčasta s Load-Lock profilom za pritrditev napenjalnih trakov 2 para priveznic (zank za privez) v zunanjem okviru na labodjem vratu v utoru, vsaka 5 t 8 parov priveznic v zunanjem okviru na spuščeni površini (tiefbett), vsaka 5 t 24 t dvostopenjski podporni vitel, enostransko upravljanje, s ravnim podstavkom, brez kompenzacije potiskov 2 priložena zagozda s pritrditvijo Bočna zaščita iz aluminija Zaščita pred podvozjem iz jekla Četrtinski blatniki pred in za osnim agregatom 2 zabojnika iz nerjavečega jekla, b=600/h=400/t=500 mm, z ogledalno-polirano zaklepno vrata 2 para žepov za vložne kolike v zunanjem okviru na labodjem vratu, notranja mera 70 x 40 mm Ledpji Ri Hvjfx Ag Esaf 6 parov žepov za vložne kolike v zunanjem okviru v spuščeni površini (tiefbett), notranja mera 70 x 40 mm Notranja širina med koli: 2.420 mm 3 vezne/palice za zavezovanje v spuščeni površini, prečno v tleh preko celotne širine do zunanjega okvirja, približno 100 mm visoko. Z 20mm okroglimi jeklenimi letvami, zgoraj in spodaj, razdalja zgoraj-spodaj približno 60 mm. Spodaj z kotnim profilom kot zaključek, deloma odprto navzdol. Za fiksiranje in vstavljanje koli 80 x 80 mm. Št. vstavljivih koli B=80/ T=50/ L=1200 mm, vroče pocinkane Št. vstavljivih koli B=80/ T=80/ L=1200 mm, vroče pocinkane Mehanična zadnja izvlečna plošča z ročno ročico, izvlečljiva približno 1.500 mm, z zaporo vsakih 500 mm, z nosilnim tramom, v težišču bremena: pri 500 mm obremenljivo z 2.000 kg čez celotno širino, pri 1.000 mm z 1.000 kg in pri 1.500 mm z 500 kg, vključno z izvlečno zaščito podvozja z osvetlitvijo 2 para vstavljivih koli B=80/ T=80/ L=1200 mm, vroče pocinkane Odprti prostor za shranjevanje vstavljivih koli, na prednji steni ali pod nakladalno površino (za 10 vstavljivih koli 80 x 50 x 1200 mm in 4 koli 80 x 80 x 1200 mm) Osi in vzmetenje SAF osi z bobnastimi zavorami Lasermerjeno podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Zadnja os vodljiva, z avtomatsko blokado za vzvratno vožnjo prek vzvratnih luči, dodatna blokada prek gumba na vozilu Zračno vzmetenje z ventilom za dvig in spust Kolesa in pnevmatike 235/75 R 17,5 po izbiri proizvajalca Jekleni platišča v dvojni montaži, tovarniška srebrna barva Zavorni sistem Dvovodna pnevmatska zavorna naprava Parkirna zavora z vzmetnim akumulatorjem 2 proti zamenjavi varna spojna glava spredaj, brez povezovalne cevi EBS, elektronski zavorni sistem z EBS vtičem spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo se sme vleči le z vlečnimi vozili, ki zagotavljajo delovanje ABS! Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini; tovornjak mora biti ustrezno pripravljen, ni vključno z vgradnjo v tovornjak Elektrika 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 bele pozicijske luči spredaj 2 kombinirani bele/rdeče označevalne luči zadaj 2 x 7-polna vtičnica spredaj, brez povezovalnega kabla 2 dodatna LED delovna žarometa zadaj, vezana na vzvratno luč 1 LED rotacijska opozorilna luč z nosilcem, vključeno na parkirno luč (luč snemljiva) dodatna 7-polna vt...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.860 kg, največja dovoljena obremenitev: 23.140 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.538 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Prilagojena rešitev za prevoz Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema potekata individualno, po željah stranke. *Podvozje, sedelna prikolica, prevozniško podjetje* Fino zrnata jeklena varjena konstrukcija, sedelna plošča z dvema zamenljivima sedelnima klinom Zunanji okvir rahlo nagnjen, nova izvedba z Load-Lock profilom za pritrditev zategovalnih trakov 24 ton, dvostopenjski dvižni mehanizem, upravljanje z ene strani, s pravim spodnjim delom, brez kompenzacije potiska Prostokotni pritrdilni oporni profil oziroma prosti radij gibanja nazaj približno 1920 mm 2 podložna klina z držalom Stranski odbijač iz aluminija Spodnji odbijač iz jekla Delni blatniki spredaj in zadaj za vsako osjo 1 nosilec za rezervno kolo za 1 gumo, s pritrdilnim kompletom za kolo 1 plastična orodjarna škatla, z vložkom, š=620/v=360/g=440 mm, zaklenljiva z vložkom (ključavnica ni vključena v dobavo) *Osi + vzmetenje* Bobnaste zavore, izbira proizvajalca Laserjsko merjenje osi/podvozja, zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje *Zavorni sistem* Dvodelni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Zavora s pomnilnikom vzmetne energije Duomatic priključek spredaj, brez povezovalnega kabla Ledpfxokv Uvzj Ag Ejaf EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Pozor: priklopno vozilo lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z ventilom za dvig in spuščanje Sistem za stabilnost vozila med vožnjo *Kolesa in pnevmatike* 235/75 R17,5, izbira proizvajalca Jeklena platišča, tovarniška srebrna barva *Elektrika* 24 voltov, večkamrne luči, stranska rumena LED osvetlitev 2 beli pozicijski svetili spredaj 2 bela/rdeča stranska gabaritna svetila zadaj 1 x 15-polna vtičnica spredaj, brez povezovalnega kabla *Pod* Plasti iz sitotiska, debeline približno 30 mm, za visoko točkovno nosilnost, za obremenitev osi viličarja do največ 5600 kg Prednja stena / nosilci v kotih spredaj 25 mm aluminijast votel profil, približno 1350 mm visok, nosilci v kotih iz jekla v volumenski izvedbi *Država registracije/nalepke* Nemčija z odobritvijo in poročilom Dekra (v skladu z §13 EG - FGV) 24-urna servisna telefonska številka pripravljeno za pritrditev registrske tablice v eni vrstici Obrobna označba z odsevnim trakom v skladu z ECE R 048, stranska bela in zadnja rdeča *Lakiranje* Okvir vroče pocinkan ali lakiran po želji stranke Prednja stena iz aluminija