Fliegl Tps 118 Bau Standard nakup rabljenega (18.436)

Stanje: novo, številka stroja/vozila: e77e603e96d0ea4194a7f7661, lastna masa: 3.000 kg, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grain steel welded construction 5 pairs of lashing eyes screwed to the floor/outer frame, each rated at 3 tonnes 2 additional pairs of lashing eyes screwed to the floor, each rated at 5 tonnes in the corners Support leg with gearbox at the front Folding rear support 2 wheel chocks with holder Galvanised steel underrun protection Rear spray flaps across full width Quarter shell mudguards Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & suspension GFA or BPW drum brake axles Laser-measured axle/chassis alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking system 2-line compressed air braking system Hand spindle parking brake Integral air reservoir 2 fail-safe coupling heads at the front with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure proper functioning of the ABS system! Electrics 24 volts, multi-chamber tail lights, side yellow LED lighting Gjdpoi Riv Tsfx Apbeit 2 white position lights at the front 2 white/red marker lights at the rear Two 7-pin fail-safe plugs at the front, with connecting cable, Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 320 mm high, front corner stanchions in steel volume design Side panels 25 mm aluminium hollow profile, 320 mm high, foldable and removable, subdivided by 1 pair of plug-in centre stanchions Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame with bracket for ramp locking, loading width approx. 2,430 mm Ramps 2 steel ramps, 3,100 mm long, 510 mm wide, split lengthwise, laterally adjustable, with handle on ramps wooden inlay with gas spring for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the gross weight may not be achievable due to permissible axle/support/kingpin loads. (Poor handling and trailing stability may result from improper load distribution) Country of registration/plates Country of registration: Germany with Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape to ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Nova Grey, 10 years warranty against rust-through Front/rear panels aluminium anodised, centre stanchion DB 7350 Nova Grey Ramps hot-dip galvanised Note: Archive images!

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Giodpfei Rixrex Apbjt Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: novo, številka stroja/vozila: a3b1347da4aa7f31dceb875db, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the outer floor/frame, each rated at 5 tons Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Gsdpoi Ri Ilefx Apbeit Full-width rear mudflap Quarter-shell fenders Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System Dual-line air brake system Hand spindle parking brake Integral air reservoir 2 interchange-proof coupling heads at the front with connecting pipes to the towing vehicle ABS and ALB, ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white front position lights 2 white/red rear marker lights 2 x 7-pin interchange-proof plugs at the front, with connecting cable Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Rear tapering approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high Side walls 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / corner posts 1 pair of steel stanchions fixed to the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps wooden inlay with gas strut for one-person operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permitted axle/support/coupling loads. (Poor driving and tracking may result from incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year warranty against rust-through Front wall aluminum Side wall anodized aluminum Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Gjdpsyl E Dqefx Apbeit Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized

Stanje: novo, največja dovoljena obremenitev: 8.665 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 910 mm, skupna širina: 2.550 mm, NEW VEHICLE Fliegl Tandem Trailer for Timber Transport with Stanchions, Model TPS 118 Holz Gross weight: 11,800 kg Gjdpfx Aew N U I Hepbjit Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Load length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Further information: plus freight/setup from storage location 26639 Wiesmoor: €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled with "Load-Lock profile" for strapping hooks Front geared support leg Rear support, foldable 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open storage compartment for insertable stanchions under the loading platform 4 pairs of stanchion pockets recessed in the outer frame, internal dimension 83 x 83 mm 4 stanchion pockets recessed mid-floor, reinforced to main frame, internal dimension 83 x 83 mm 6 pairs of plug-in stanchions: w=80 / d=80 / l=2000 mm, hot-dip galvanized Note: Stanchion pockets/plug-in stanchions are not intended for the sole securing of long materials, pipes, etc. without lashing. Side underride protection in aluminum Drawbar: Tandem trailer coupling Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length 4 x 500 mm from 1,800 - 3,800 mm, currently set to 1,800 mm. (Note! Observe load distribution and drawbar load) Axles + Suspension: GFA or BPW axles (manufacturer's choice), with tapered roller bearings and S-cam brakes "Axles/chassis laser aligned" for reduced tire wear and fuel consumption Parabolic spring suspension with maintenance-free rubber-metal bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires: 235/75 R 17.5" Steel rims, factory silver Brake system: 2-line compressed air brake system Spring-actuated parking brake Integral air reservoir 2 fail-safe coupling heads at front with connection to tractor unit, ABS and ALB, ABS plug front, complete with connection cable Attention: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics: 24 Volt, multi-chamber LED lights, side marker lights in yellow LED, license plate lights in LED (Note: certain towing vehicles may trigger diagnostic errors although function is ensured) 2 white position lights at the front in LED 2 white/red lane marker lights rear in LED 2 x 7-pin ISO plug at the front, fail-safe, with connecting cable Floor: Anti-slip phenolic plywood, approx. 30 mm thick, for high point load resistance Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating notes: The gross weight specified is technically feasible. Depending on the cargo, gross weight may not be achievable due to axle/support/saddle load restrictions. Special permit required if towing length exceeds 18,750 mm. Observe national approval regulations. Registration/Plates: Country of registration: Germany with Dekra inspection and certification 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, side white and rear red Paintwork: Frame hot-dip galvanized including passivation "15 years warranty against rust-through" Note: Floor corrugation due to hot-dip galvanizing possible! Vehicle from ongoing production – delivery time approx. 2-3 weeks.

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl tandem low-loader with ramps, model TPS 118 Chassis fully hot-dip galvanized – sidewalls aluminum Vehicle from current production – delivery time approx. two weeks Gross weight: 11,800 kg Empty weight: 2,960 kg Payload: 8,840 kg Total length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Further information plus pre-carriage / handling from storage location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Slightly sloping outer frame, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing rings on the exterior floor, each 5t 1x front corners, 1x in front and 1x in the rear slope at the back Pair of lashing rings on the exterior floor / outer frame, each 5t Support leg at front Foldable rear support 2 wheel chocks with holder Side impact protection aluminum Underrun protection galvanized steel Spray flaps at the rear across the full width (not in conjunction with forklift holder) Gjdpfx Apsv E Dqlebjit Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar arrangement for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max adjustment 300 mm Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalizer) Brake system 2-line compressed air brake system Color-coded line layout for easier servicing Hand spindle parking brake 2 key-proof coupling heads at front, with connection lines to towing vehicle 24 volt ABS and ALB, ABS socket at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 volt, multi-chamber taillights, side yellow LED lighting 2 white position lights at front LED 2 white/red lane marker lights at rear 2 x 7-pin key-proof plugs at front, with connecting cable Floor Steel / checker plate floor for high point load capacity Note: Light floor warping due to welding distortion possible! Platform length: approx. 6,200 mm Rear slope approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high Sidewalls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions in sidewall height, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions bolted to frame with holder for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wood-covered (ramp tip with steel/checker plate) gas strut for single-operator handling Paintwork Frame hot-dip galvanized with passivation "15-year warranty against rust-through" Front wall RAL 9006 white aluminum Sidewall RAL 9006 white aluminum Loading ramps hot-dip galvanized Hire purchase offer: 48-month term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, The images shown are archive photos. Gedpoi Ri H Dofx Apbeit Further information Chassis: Drawbar central axle trailer Fine-grained steel welded construction Outer frame slightly slanted, with Load-Lock profile for lashing strap attachment. Note: To attach straps in conjunction with sideboards, the sideboards must be opened! Gear support foot at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection, galvanized Quarter-shell mudguards 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, can be locked with a padlock (padlock not included) 1 storage compartment for plug-in stanchions open, located underneath the loading platform 4 pairs of stanchion pockets recessed into the outer frame, 83 x 83 mm internal dimension 4 stanchion pockets centrally integrated in the floor, reinforced to the main frame, 83 x 83 mm internal dimension 6 pairs of plug-in stanchions, W=80/D=80/L=2000 mm, hot-dip galvanized Note: Stanchion pockets / plug-in stanchions are not designed for load securing of long goods, pipes, etc. without strapping Tandem trailer coupling Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length 4 x 500 mm from 1800 - 3800 mm, set to 1800 mm (Note: Observe load distribution and support load!) Axles & suspension GFA axles with tapered roller bearings and S-cam brake Axle/chassis laser alignment reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings and mechanical axle load equalization (rocker equalizer) Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims, factory silver Brake system 2-line air brake system Spring-loaded parking brake Integral air reservoir 2 foolproof couplings at the front with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Floor Anti-slip phenolic plywood, approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating notes The specified gross weight is technically possible; depending on the load, the total weight under observation of permissible axle, support, and king pin loads may not be reached. Registration/plates Registration country: Germany With Dekra acceptance and certificate 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides, red at the rear Paintwork Frame DB 7350 Nova grey Warning: Archive Photos!

Stanje: novo, največja dovoljena obremenitev: 10.600 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross vehicle weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm incl. rear incline Width: 2,550 mm Loading height: 900 mm Additional information plus pre-carriage / provisioning from stock location 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consists of Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly inclined, new design with "Load-Lock profile" for lashing strap anchoring 6 pairs of lashing rings outside in the floor/outer frame, each 5t 3 pairs of lashing rings outside in the floor, each 5t 1 at the front corners, 1 before and 1 in the rear incline at the back Landing leg at the front Foldable rear support Wheel chocks with holder Steel underrun protection Rear spray flaps across total width (not in combination with forklift mounting) Quarter-round mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Central axle trailer coupling gear Drawbar with certified 40 mm drawbar eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Drum brake axles, manufacturer's choice "Axles & running gear laser aligned" – reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5" as per manufacturer Steel wheels in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to towing vehicle 24 volts EBS, electronic braking system with EBS plug at the front, with connection cable Notice: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Godpsy Dzk Ssfx Apbsit Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable Floor Steel / chequer plate floor for high point load capacity Note: Slight floor rippling possible due to welding distortion! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front bulkhead / corner stanchions 25 mm aluminium hollow profile, 400 mm high Sidewalls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame and with holder for securing the loading ramps, drive-on width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wooden overlay (tip area steel / chequer plate) gas pressure spring for single-person operation Operating instructions The indicated gross vehicle weight is technically feasible, but depending on cargo, the total weight may not be achievable while complying with the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior may occur due to improper load distribution) Special permit required if maximum train length exceeds 18,750 mm. Country-specific registration regulations must be observed. Country of registration / license plates Country of registration: Germany with Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline pre-installed for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white on sides, red at rear Paintwork Frame in DB 7350 Nova grey "10-year warran

Stanje: novo, največja dovoljena obremenitev: 8.220 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, NEW VEHICLE Fliegl Tandem Sliding Curtain Through-loader Tandem Through-loading system with front portal doors Drive-over ramp 2,400 mm wide and 350 mm long Gross weight 11,800 kg Payload 8,220 kg Unladen weight 3,580 kg Overall length 9,450 mm Loading length 7,300 mm Loading width 2,480 mm Interior height 2,790 mm Loading height 1,000 mm Outer frame with LOAD LOCK profile Godpfx Aop N Ib Nepbsit Foldable rear support Tow eye 40 mm Adjustable drawbar from 1,950 mm to 2,300 mm Air suspension with lift and lower valve Plus pre-carriage/handling from warehouse Wiesmoor EUR 1,280.00 net Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT, monthly rate EUR 519.00 net Vehicle is available at short notice from current production. Tarp color can still be selected in some cases.

Stanje: rabljeno, lastna masa: 3.500 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, prva registracija: 10/2009, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 3.000 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, curtainsider and frame, 2 axles, tandem, air suspension, lift + lower function, ABS (anti-lock braking system), Edscha sliding roof, lashing rings, underrun protection, front support legs, rear support legs, height-adjustable drawbar. Body: flatbed + tarpaulin trailer for glass transport with Edscha roof. Tyres approx. 50% tread remaining. ACCESSORY DETAILS WITHOUT GUARANTEE, SUBJECT TO PRIOR SALE, MODIFICATIONS, AND ERRORS! Gedpfx Aei Rpx Njpbeit

Stanje: rabljeno, lastna masa: 5.100 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, Leto izdelave: 2018, Lastna masa: 5100 kg. Pregled vseh razpoložljivih vozil najdete na naši spletni strani. Potrebujete financiranje? Ponujamo individualne finančne rešitve, pogodbe za celotno storitev in telematske storitve. Z veseljem vam osebno svetujemo. Gisdpfx Apey Rcdtebjt

Stanje: rabljeno, lastna masa: 5.100 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, Leto izdelave: 2018, Lastna masa: 5100 kg. Pregled vseh razpoložljivih vozil najdete na naši spletni strani. Potrebujete financiranje? Ponujamo individualne finančne rešitve, pogodbe za celotno storitev in telematske storitve. Z veseljem vam osebno svetujemo. Gijdpey Rcdmofx Apbjt

Stanje: rabljeno, največja dovoljena obremenitev: 26.300 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.800 mm, prostornina tovornega prostora: 94 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2017, Oprema: ABS, 2-axle Fliegl SZS 320 VIN: 2021899 Chassis / Attachments: * Air suspension // lift and lower function * Jost landing gear * 2 x BPW Eco Plus axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread: front approx. 70%, rear approx. 70% Body: * Standard Tautliner * Pallet stop both sides * Edscha sliding roof * Side curtains * Multilock system Weights: * Gross weight: 31,000 kg * Unladen weight: 4,700 kg * Payload: 26,300 kg Other: * German vehicle * Main inspection (HU) and safety test (SP) valid until 01/2027 ---- New main inspections, safety checks, or weight reductions/increases are available upon request. We are happy to assist you with obtaining export/transfer license plates, and can also arrange delivery of your purchased vehicles within Germany. Please contact us! Godpfx Asy Rv Irepbeit ---- We speak the following languages: German, English, and Russian! ---- No liability accepted for typographical or printing errors. Subject to changes, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength lies in the sale of new and used commercial vehicles. On a site covering 11,000 m², we offer a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. Because customer satisfaction is very important to us, we provide our customers with excellent all-round service and a dedicated contact person to assist with buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to help you load your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Day registration/export license plates We are happy to help you acquire export or temporary license plates.

Stanje: rabljeno, največja dovoljena obremenitev: 6.580 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2020, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.400 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, ° Priklopnik z osrednjo osjo ° Podvozje proizvajalca FLIEGL ° Nadgradnja ponjava s pregradami ° Vrata spredaj in zadaj (prehoden) ° 2 zapahi na vsaka vrata ° Drsna ponjava na obeh straneh ° Drsna streha Gijdpfxjy Nf N No Apbot ° Trojne aluminijaste letve ° Omejitvene letve za palete ° Pnevmatike 235/75R17,5 143J ° Priklopna gred nastavljiva po višini ° Ojačano nakladalno dno ° Dviganje-spuščanje ° Spojne glave rdeče in rumene ° Svetlobni vtikač 24 V 15-polni ° EBS vtičnica ° Vozilo ima običajne sledi uporabe

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024288, lastna masa: 6.075 kg, največja dovoljena obremenitev: 32.925 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 50 odstotek, barva: modra, Leto izdelave: 2018, The images are for reference only! The vehicle may still be in use! Chassis Semi-Trailer Forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly inclined with "Load-Lock profile" for lashing strap attachment Note! To attach straps in combination with side walls, the side walls must be opened! 24 t 2-speed landing gear, single-side operation, with straight lower section, without push balancing Pull-out ladder at the rear Side door retainers 2x wheel chocks with holders Attention! Only Chassis No. 2024286 - 89: Pallet box for 30 Euro pallets (ground clearance approx. 220 mm) Galvanized steel underrun protection Quarter shell mudguards in front of and behind axle assembly with anti-spray flaps in accordance with EU regulations Rear impact protection Plastic toolbox with drawer and shelf, width=650 / height=520 / depth=670 mm, can be locked with a padlock (padlock not included) Axles & Suspension SAF axles "Axles/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, including forced lowering and start-up aid, activation by "braking 3x" (Start-up aid functions up to 30% axle overload and up to a speed of max. 25 km/h) Braking system 2-line compressed air brake system, color-coded tubing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, no connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Warning: The trailer may only be towed by towing vehicles that ensure proper ABS operation! with raise & lower valve Vehicle stability control system Wheels and Tires Gijdpjy Dfprofx Apbot 385/65 R22.5, manufacturer at the manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber rear lamps, yellow LED side lights 2 white position lamps at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connecting cable Front wall / front corner posts 2, 580 mm high, corner posts in volume steel design, release device for side curtain at front wall "Crash blocker", steel rear impact protection inside lower section at approx. 140 mm height Center posts 3 pairs of sliding stanchions, moveable along the entire length, with quadruple stake pockets and long bottom pocket 3 pairs of stanchion positions Rear wall / rear corner posts Rear corner posts steel up to lower edge of roof, curtain hook feature with round tube and curtain tensioning ratchet Rear portal doors, double-wing with 2 internal rotating bar locks each Curtain Curtain with integrated horizontal and vertical belts Tension locks in stainless steel Roof Sliding roof, end-lift at the rear foldable, tarpaulin can be moved from rear to front, tarpaulin color: white Optimized rain gutter at the rear, on the end cross member above the doors Operating notes When assembling a tractor-trailer combination, ensure compliance with the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please pay special attention to the following: The transport contractor is liable for any damages incurred. The transporter must obtain their own permit according to §29 StVO. We assume no liability for the transfer of vehicles. The images are for reference only! The vehicle may still be in use!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21201011556, lastna masa: 3.300 kg, največja dovoljena obremenitev: 8.200 kg, skupna masa: 11.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, barva: rdeča, These images are archive photographs; the vehicle may still be in use! Giedpfolhpzvsx Apbst Further information: Steel welded design, continuous tipping shaft at the rear with 80 mm ball bearing mount. Gearbox support leg at the front, foldable rear support, 2 wheel chocks with holder, steel underrun protection, full-width rear mudflap, quarter-shell fenders, spare wheel (same make as main tires), steel rim, unattached, 1 plastic toolbox with shelf, dimensions w=620/h=360/d=440 mm, lockable with a padlock (padlock not included). Note: When folded down, the sideboard touches the toolbox. Lockable storage compartment for loading ramps beneath the bed. 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (ramp mounting bar at the rear). Drawbar with tested 40 mm towing eye, height-adjustable via spindle, maximum adjustment range 300 mm. BPW drum brake axles, axles/chassis laser-aligned for reduced tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). 2-line air brake system. Color-coded wiring for easy servicing. Manual spindle parking brake, integral air tank, ABS and ALB, with ABS connector at the front and connecting cable. Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality. 2 non-interchangeable couplings at the front with connecting lines to the towing vehicle. 24 Volt, multi-chamber lights, amber LED side lights, 2 white position lights at the front, 2 white/red lane marker lights at the rear. Two 7-pin, non-interchangeable connectors at the front with connecting cable. Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder rated up to 170 bar, non-throttled. Throttle to be retrofitted on the truck if required. Hydraulic connection with SVK plug NW 10/3, including connecting hose. Operation via truck PTO-driven hydraulics. Robust tipping bed with 4 mm steel floor, steel drop-side construction, continuous side walls, foldable and pendulum mounted with bottom central locking. Removable corner stanchions at the rear. Rear wall foldable and pendulum mounted with bottom central locking. Flatbed length approx. 5,000 mm, side walls with 6 bottom hinges, flatbed width 2,420 mm. 5 pairs of lashing rings in the floor, each rated for 5 tons. Country of registration: Germany, with Dekra inspection and appraisal (according to §13 EC - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21201012268, lastna masa: 3.240 kg, največja dovoljena obremenitev: 8.560 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, prva registracija: 05/2022, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, velikost pnevmatike: 235/75 r17,5, barva: zelen, obratovalna teža: 3.240 kg, Further information Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holder, steel underrun protection, full-width rear mudflaps (not in combination with forklift mounting), quarter-shell fenders, spare wheel (same make and specification as basic tyres), steel rim, loose, plastic toolbox with shelf, width=620 / height=360 / depth=440 mm, lockable with padlock (padlock not included). Note: Sideboard touches toolbox when folded down. Lockable storage compartment for loading ramps beneath the loading platform. Pair of aluminium ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (hook-in ramp rail at rear). Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm. Gijdpfx Apek E Tdasbot BPW drum brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker balancing). 2-line air brake system, colour-coded pipe layout for easy servicing, hand spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at front, with connection cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS. Duomatic connection at front with connecting line to the truck. 24 volt, multi-chamber lights, side-mounted yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, one 15-pin connector at the front with connection cable. Three-way tipper body, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without restrictor (can be retrofitted to the truck if required). Hydraulic connection with SVK plug NW 10/3, including connecting hose. Hydraulic operation via truck PTO. Robust tipping platform with 4 mm steel plate floor, steel sidewall construction, continuous side panels, foldable and pendulum-mounted with central locking at the bottom. Removable corner posts at the rear. Rear panel foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side panels with 6 hinges at the bottom. Sideboard retraction springs (not possible with split side panels). Platform width 2,420 mm, pair of lashing eyes in floor, each 5 tons. Operating notes: The stated gross weight is technically feasible, but depending on the load, the gross weight may not be achievable whilst adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of registration: Germany, with Dekra inspection and report (according to §13 EC-FGV), 24/7 service hotline, prepared for one-line licence plate holder, contour marking with reflective stripes according to ECE R 048, white on the sides and red at the rear.

Stanje: rabljeno, številka stroja/vozila: WFDFLT21802026297, lastna masa: 2.872 kg, največja dovoljena obremenitev: 15.128 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2019, velikost pnevmatike: 385/65 r22,5, Leto izdelave: 2019, Further information: Fine-grain steel welded construction, front stop, longitudinally adjustable and foldable, pair of guide rollers removable, front and rear, Swap Guard – swap body guide, located before and after each container lock, 4 container locks with sturdy outriggers based on 20-foot positions for swap bodies 7.15 m and 7.45 m, turntable with robust ball-bearing slewing ring, wheel chocks with holders, aluminium side underrun protection, side underrun protection set inward for optimal clearance to the swap body supports, steel rear underrun protection, rear underrun protection shortened for optimal clearance to the swap body supports, lighting system installed protected, quarter mudguards at the front and half mudguards at the rear, without impact protection, spare wheel holder in basket design, plastic toolbox. Giedsi Ri Dzspfx Apbjt Drawbar (L = 2,200 mm) with tested 40 mm towing eye, drawbar length, drawbar height adjustment via spring. SAF disc brake axles with 430 mm disc diameter, axles/chassis laser measured to reduce tyre wear and fuel consumption, air suspension. 2-line compressed air brake system, colour-coded piping for easy servicing, air supply 208 litres, spring-actuated parking brake, 2 interchangeable coupling heads at the front, with connection lines to the truck, EBS, electronic braking system with EBS plug at the front, with connection cable. (Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS!) with lift/lower valve, hold function in both lift and lower positions, brake release function via button on vehicle beside the H & S valve, to release the brake in coupled condition, EBS power supply must be ensured! 24 Volt, multi-chamber lights, lateral yellow LED lighting, 2 white position lights at front, 2 white/red clearance lights at rear, 1 x 15-pin plug at front with connection cable, extra LED work light at the rear operated via reverse gear, front-centre mounted rearward-facing LED work light operated via reverse gear. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), prepared for single-line number plate holder, warning sign according to ECE-70, ADR warning sign at the rear, foldable, contour marking with reflective tape according to ECE R 048, white on the side and red at the rear.

Stanje: rabljeno, številka stroja/vozila: WFDFLT21802025375, lastna masa: 2.620 kg, največja dovoljena obremenitev: 15.380 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2019, velikost pnevmatike: 385/65 r22,5, Leto izdelave: 2019, Further information: Fine-grained steel welded construction, front stop longitudinally adjustable and foldable, pair of guide rollers removable, front and rear, pair of guide rollers removable, additionally 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45, turntable with heavy-duty ball bearing ring, wheel chocks with holder. Godpji Riz Hofx Apbeit Side underrun protection made of aluminum, rear underrun protection made of steel, quarter-shell mudguards at the front and half-shell mudguards at the rear. 1 spare wheel holder for 1 single tire, with wheel fastening kit in basket design. Drawbar with certified 40 mm towing eye, drawbar height adjustable via spring. BPW disc brake axles, axles/chassis laser-measured to reduce tire wear and fuel consumption, air suspension. 2-line compressed air braking system. Colored line routing for easy maintenance. Air reservoir 208 liters. Spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, EBS by Wabco, electronic braking system with EBS plug at the front, including connection cable. (Attention: The towed vehicle may only be pulled by towing vehicles that ensure the effectiveness of the ABS!) With raise & lower valve, holding function in each raised/lowered position. 24 Volt, 4 x 3-chamber tail lights + 1 round reversing spotlight + 1 round rear fog light, lateral yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable, 1 additional LED working light at the rear controlled via reverse light, 1 LED working light centrally at the front between the beams, facing rearward, controlled via reverse light. Country of registration: Germany, with Dekra approval and inspection report (according to §13 EG - FGV), prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear.

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2020, Oprema: ABS, = Dodatne opcije i oprema = - Vazdušno oslanjanje pozadi - Vazdušno oslanjanje napred = Napomene = Za sva pitanja u vezi vozila, gospodin Seidel Vam je na raspolaganju (telefon ). Fliegl TPS 119 platforma Vazdušno oslanjanje, vučna kuka Ø 40 mm, Duomatic, GFA osovine, Knorr ABS, opružni sabirači, rampe za uspon, dozvoljena ukupna masa: 11.900 kg, sopstvena masa: 3.250 kg, nosivost: 8.650 kg, dimenzije tovarnog prostora: dužina 6.200 mm, širina 2.490 mm, visina 380 mm, gazna površina pneumatika: 1. osovina 10 mm, 2. osovina 10 mm Na zahtev možemo Vam ponuditi lizing ili finansiranje. Gospodin Seidel (telefon ) Vam je na raspolaganju. Dodatne informacije pronađite na našoj internet stranici. ... Greške, promene i međuprodaja su mogući !!! - = Dodatne informacije = Sopstvena masa: 3.250 kg Giodpfx Apsy Ada Tebot Nosivost: 8.650 kg Dozvoljena ukupna masa: 11.900 kg Dimenzije tovarnog prostora (D x Š x V): 6200 x 2490 x 380 mm Poslednja inspekcija: 2026-07 Za dodatne informacije obratite se Tobijasu Ebertu.

Stanje: rabljeno, številka stroja/vozila: WFDFLT21801003760, lastna masa: 4.480 kg, največja dovoljena obremenitev: 13.520 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2014, velikost pnevmatike: 445/45 r19,5, Leto izdelave: 2014, Further information Fine-grained steel welded construction 1 gearbox support leg at the front, with straight lower section and one-sided operation on the right in direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding over main frame, rear impact protection buffers Trailer coupling device for tandem trailers Drawbar with tested 50 mm towing eye, freight forwarding version, undercoupling drawbar Axles and Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic connection at the front, with connecting hose to truck, EBS, Electronic Braking System with EBS connector at the front, with connection cable Brand: Haldex, Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! Gedpjni Udzefx Apbeit Floor: Platform length approx. 7,300 mm, phenolic plywood floor Front wall: Aluminium approx. 1,200 mm, corner stanchions steel in volume version Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane-holding lights at the rear 1 x 15-pin connector at the front, with connecting cable Approval / Plates Country of approval: Germany, with Dekra inspection and report 24/7 service hotline, prepared for single-line license plate holders, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Stanje: rabljeno, številka stroja/vozila: WFDFLT22001011091, lastna masa: 5.340 kg, največja dovoljena obremenitev: 12.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2021, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Crank support leg at the front Foldable rear support Wheel chocks with holder Side underrun protection made of aluminum Full-width mud flaps at the rear Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 E-tyre, with wheel fixing kit 1x spare wheel, same brand as main tyres, steel rim 1x stainless steel storage box, width=600/height=400/depth=500 mm, with polished lockable door Lashing points for low loader 5 pairs of stake pockets embedded in the outer frame, inside dimensions 70 x 40 mm (can be retrofitted with 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed into the top and side of the outer frame, each 10 tonnes 2 pairs of fold-down lashing eyes additionally recessed into the low bed platform, each 10 tonnes (1 pair at the front and 1 pair on the rear slope) Towing device central axle trailer Drawbar with certified 50 mm drawbar eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tyre wear and fuel consumption Axle spacing 1810 mm (then 10 tonne technical axle load) Air suspension Brake system 2-line compressed air brake system, color-coded air line layout for easy maintenance. Spring-loaded parking brake Duomatic coupling at the front, with connecting line to towing vehicle, EBS, Electronic Braking System with EBS connector at the front, with connection cable Gjdpfxop N Dguj Apboit Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lift & lower valve Vehicle - Driving stability system Axle load detection via EBS Canbus signal, for display on the dashboard display, truck must be suitably pre-equipped, no truck installation (not a certified scale) Wheels and Tyres 235/75 R17.5 Brand Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connection cable 1 additional LED work light at the rear, switched via reversing light 1x LED beacon with holder, switched via side light (lamp removable) Flooring subsequently with 70 mm softwood flooring, wheel arch area with steel/chequer plate covering Rear beavertail with Mega Grip serrated grating coating Low-bed platform incl. rear beavertail 6500 mm Front wall / corner stanchions 25 mm aluminium hollow section, 400 mm high, removable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split with cable tension, laterally adjustable Ramp traverse, minimum gap approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip serrated grating Operated hydraulically via own electro-hydraulic unit, mounted in a steel box, operation on the right side at the front. Note: NATO socket with connecting cable on the truck required. Cable must not be connected during driving! Hydraulic lateral adjustment of loading ramps, individually controllable (only in combination with hydraulic ramp actuation)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21802027375, lastna masa: 2.620 kg, največja dovoljena obremenitev: 15.380 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2020, skupna dolžina: 9.470 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 30 odstotek, barva: siv, Leto izdelave: 2020, The images shown are archival photos! Weights and Dimensions: Gross weight: 18,000 kg Payload approx.: 15,380 kg Aggregate load: 18,000 kg Unladen weight (basic version) approx.: 2,620 kg +/- manufacturing tolerance Overall length with swap body 7,450 mm approx.: 9,470 mm Maximum overall width: 2,550 mm Frame height lowered approx.: 1,180 mm Frame height raised approx.: 1,380 mm Frame height in driving position approx.: 1,260 mm Parking height approx.: 1,220 to 1,320 mm Standard stop to front lock approx.: 800 mm Locking distance: 5,853 mm Coupling height approx.: 800 mm Drawbar length (set to) approx.: 2,200 mm Usable drawbar length from stop swap body 7,450 approx.: 1,970 mm Gedpfsyxqrzsx Apbjit Parking heights are specified for level ground. Note: Articulation in lowered position not possible! Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of guide rollers removable, front and rear 4 container locks with robust support arms on 20” basis for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing ring 2x wheel chocks with holder Aluminum side underrun protection Side underrun protection set inward for optimal clearance to the swap body supports Steel underrun protection Shortened underrun protection for optimal clearance to the swap body supports, lighting system mounted protected Half-shell mudguards Without bumper Drawbar coupling, turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension SAF disc brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded lines for easy servicing Air reservoir 208 liters Spring-loaded parking brake 2 interchange-proof coupling heads at the front with connecting lines to the truck EBS, electronic brake system with EBS connector at the front, with connecting cable Note: The towed vehicle may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve, holding function in both raised and lowered positions Wheels and Tires 385/65 R22.5" - Manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin interchange-proof connectors at the front, with connecting cable Country of Approval / Plates Germany With Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation “15 years rust-through warranty” The images shown are archival photos!

Stanje: novo, največja dovoljena obremenitev: 8.580 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further information plus pre-carriage / provision ex storage location 26639 Wiesmoor €1,280.00 / net Chassis: Central axle tipper trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball bearing mount Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underride protection Rear mudflaps across the entire width (not in combination with forklift holder) Gisdpfx Ajy Dzliopbst Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! Sideboard contacts the toolbox when folded down. Lockable storage compartment for loading ramps under the loading area Central axle trailer drawbar Drawbar with certified 40 mm drawbar eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235/75 R 17.5" manufacturer’s choice Steel rims, factory silver Braking system 2-line compressed air brake system Color-coded piping for easy service Hand spindle parking brake 24 volt ABS and ALB, front with ABS connector and connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! 2 non-swappable coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 to 24 volts, multi-chamber LED lights, side amber LED lighting, LED license plate lights (Note: certain towing vehicles may cause false diagnostic errors, despite proper function) 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin non-swappable connectors at the front, with connecting cable 1 additional LED work light at the rear, controlled via reversing light Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic delivery rate of 55 l/min). Hydraulic connection with SVK plug NW 10/3, including connecting hose Operation hydraulically via truck PTO Tipper body Robust tipper body with 4 mm steel floor, steel sideboard structure, continuous side panels, foldable and swinging with central locking at the bottom. Rear corner posts plug-in. Rear panel foldable and swinging, with central locking at the bottom. Bed length approx. 5,000 mm, sidewalls with 6 lower hinges. Sideboard retraction springs (not possible with foldable front panel) Bed width 2,420 mm 3 pairs of lashing rings in the floor, each 5 tons Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be achievable within the permissible axle/support/kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Coating Frame hot-dip galvanized, including passivation "15 years warranty against rust-through" Sideboard/platform RAL 9010 pure white Note!

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further Information Plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Support jack at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Side wall contacts toolbox when folded down. Lockable storage for loading ramps underneath the loading area NO ramps included Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axles/chassis laser measured" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalizer (rocker equalizer) Wheels and Tires 235 / 75 R 17.5" Manufacturer's choice Factory silver steel rims Brake System 2-line air brake system Color-coded lines for easier servicing Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS connector at the front including connecting cable Caution: The trailer may only be towed by towing vehicles that ensure ABS function! 2 tamper-proof coupling heads at the front with connection lines to the truck Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin tamper-proof plugs at the front with connecting cable Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, throttle must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipper Body Robust tipping body with 4 mm steel floor, steel side wall construction, continuous side walls foldable not pendulum-mounted, without lower central locking. Removable rear corner stanchions. Rear wall foldable and pendulum-mounted, lower central locking. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop side retraction springs (not available with split side walls) Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 t Gjdpfoy Dzlcsx Apbeit Operational Notes The specified total weight is technically possible; depending on the type of load, the total weight may not be achievable while observing the permissible axle/support/kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra approval and report (in accordance with §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Side boards/platform RAL 5002 ultramarine blue Note! Platform interior only primed – if painted, special platform version required! Optional: loading ramps €1,280.00 net