Fliegl Szs 260 Jumbo Mit Radmulden Und Tiefbett Für Lkw nakup rabljenega (12.583)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension Dedpoi Ri Hrofx Aqqekr SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.100 kg, največja dovoljena obremenitev: 14.900 kg, skupna masa: 21.000 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 9.930 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.680 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prilagojena transportna rešitev (prikazano vozilo je zgolj primer). Proizvodnja in oprema se izvajata individualno glede na želje stranke. Podvozje: nizkotonska prikolica Jeklena, varjena konstrukcija, sedelna plošča z zamenljivima dvema kraljevskima bolcnima, nizka nosilna plošča, ki se od območja kolesa proti gosi (swan neck) nagiba za približno 210 mm višine tovora, zadnji del se nagiba od območja kolesa, na zadnjem delu je letvena palica za aluminijaste rampe po celotni širini. Podložni klin + nosilec Bočna zaščita Pokrov koles s pocinkano jekleno pločevino, odstranljiv 1 vlečna kljuka na zadnjem delu, 10 ton Rezervno kolo + nosilec na prednji steni/predal zunaj spredaj Predal iz jekla na gosi (swan neck) spredaj, prečno, približno: D = 2400 mm, Š = 400 mm, V = 600 mm, zaklenljiv Električni vitel, 24 voltov, vlečna sila 8165 kg, nameščen spredaj na gosi (swan neck) za predalom na tovorni površini, upravljanje z radijskim daljinskim upravljalnikom, dolžina vrvi 35 m x približno 10 mm, z valjčkom za vrvi in 2 odstranljivima vodilnima valjčkoma na gosi (swan neck) in zadnjem nagibu. NATO vtičnica na priključni plošči. 1 par utorov za kolesa, ki se začnejo približno 700 mm za gosi (swan neck), vgrajeni v dno, odprti navzven. Opomba: glavni okvir je približno 145 mm višji. 4 pari mest za pritrditev kolesnih omejevalnikov (Fliegl standard), brez kolesnih omejevalnikov za parkiranje prikolice, višina približno 100 mm in dolžina približno 100 mm. Kompleti vstavljivih kolesnih omejevalnikov Pri transportu SZM (specialnega tovora) se v sprednje utore za kolesa vstavlja pribl. 50 mm visoka, pribl. 1200 mm dolga, pribl. 500 mm široka podlaga za utor za kolo. Pritrdilne zanke - nizkotonska prikolica 2 para pritrdilnih zank 2,5 tone na gosi (swan neck), 7 parov pritrdilnih ušes, vgrajenih zgoraj in ob straneh v zunanjem okvirju, vsaka 10 ton, 4 pari pritrdilnih zank 10 ton, vgrajenih zgoraj v vzdolžnem nosilcu glavnega okvirja, 1 vijak za pritrdilno zanko, 6,7 tone (JDT), zadaj na sredini v predalu za rampo, 1 zložljiva pritrdilna zanka dodatno spredaj na nizkem delu, 10 ton. Osi in vzmetenje SAF - os z bobnovimi zavorami, Zračno vzmetenje z ventilom za dvig in spuščanje Kolesa in pnevmatike 235/75R17,5 od vodilnih proizvajalcev Jeklena platišča, dvokolesna konfiguracija, tovarniška srebrna barva Zavorni sistem Dvovodni zračni zavorni sistem Zavora s pomnilnikom vzmetnih ploščic 2 varno zaščitenih priključkov spredaj, brez povezovalnega kabla Dkodei Ri Hkopfx Aqqor EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Pozor: prikolica sme biti vlečena samo s vlečnimi vozili, ki zagotavljajo učinkovitost ABS! Elektrika 24 voltov, večkomorne luči LED z uporom, rumene LED luči ob straneh, LED osvetlitev registrske tablice, 2 beli pozicijski luči spredaj, LED 2 belo/rdeče luči za ohranjanje voznega pasu zadaj, LED 2 x 7-polni in 1 x 15-polni varno zaščiteni vtičnici spredaj, brez povezovalnega kabla LED luč za celoten obseg + nosilec, vklopljena s pozicijsko lučjo dodatni LED delovni žaromet na zadnjem delu, vklopljen z lučjo za vzvratno vožnjo Talna plošča Gosi (swan neck) z jekleno/valovito pločevino Površina nizkotonske prikolice jeklena luknjana pločevina, v območju utorov za kolesa jeklena/valovita pločevina in v območju blatnikov odstranljiva pločevina. Zadnji nagib z jekleno luknjano pločevino Stranice Aluminij, 400 mm visoke, ob straneh na gosi (swan neck), vstavljive, približno 2500 mm dolge Zadnja stena aluminij, 400 mm visoka, na gosi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.900 kg, največja dovoljena obremenitev: 22.100 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prilagojena rešitev za prevoz Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno po želji stranke. #Šasi, prikolica z nizko nosilnostjo Jeklena, varjena konstrukcija Vrtljiv osni vozlič z močnim krogličnim ležajem Zadnja opora, zložljiva Podložne klinice z držalom Bočna zaščita pred trčenjem, aluminijasta Ščitniki proti brizganju zadaj, prek celotne širine Delne školjke blata pred 1. osjo Razširitve, izvlečne do 3000 mm Predal za lesene deske, na sredini nosilne površine Lesene deske 70 mm za razširitev do 3000 mm 1. par niš za kolesa, potopljenih v nižji del med osmi, nagnjenih za lažji vstop, dolžina spodaj približno 1600 mm, približno 400 mm globoko. Opozorilo! Okvir v območju glavnega nosilca je 400 mm višji od niše za kolesa. 2. par niš za kolesa med osmi, potopljenih v nižji del, nagnjenih za lažji vstop, dolžina spodaj približno 600 mm, približno 300 mm globoko. Opozorilo! Okvir v območju glavnega nosilca je 300 mm višji od niše za kolesa. Razdalja od glavnega okvirja, nosilec do nosilca zunaj, približno 1280 mm (območje niš za kolesa) Pokrov niš za kolesa z jeklenimi vstavki, odstranljiv #Oči za pritrditev, prikolica z nizko nosilnostjo 1 par odprtin za pritrditev na vzdolžnem nosilcu spredaj, potopljenih v dvignjeni del, vsaka do 10 ton. 4 pare lukenj za pritrditev na zunanjem okvirju dvignjenega dela, vsaka do 5 ton 7 parov pritrdilnih elementov zgoraj in na boku, potopljenih v zunanjem okvirju, vsak do 10 ton 1 x spredaj na dvignjenem delu 6 x v nizkem delu Prva pritrdilna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med pritrdilnimi točkami ni večja od 1100 mm Par žepev za podložne klinice, potopljenih v zunanjem okvirju, notranje dimenzije 70 x 40 mm (lahko predelani v 5-tonske obročne pritrdilne točke) Dodatne pritrdilne točke za plošče, vsaka do 10 ton 1 x na dvignjenem delu 1 x v zadnji nagnjenosti, skrajno zadaj, zunaj #Naprava za priklop, prikolica z vrtljivim osnim vozličem Prijemna vilica z odobreno 40 mm prijemno glavo #Osi + vzmetenje SAF osi s kolutno zavoro "Osi/podvozje lasersko izmerjeno" – zmanjšuje obrabo pnevmatik in porabo goriva Zračno vzmetenje z ventilom za dvigovanje in spuščanje #Kolesa in pnevmatike 235 / 75 R 17,5", jeklena platišča v dvojni izvedbi, tovarniška srebrna barva #Zavorna naprava Dodpfx Aqezl Uv Usqekr Dvovojna zavorna naprava na stisnjen zrak Zavora za parkiranje s pomnilnikom vzmetne sile Sistem stabilnosti vozila med vožnjo Detekcija obremenitve osi preko signala EBS-Canbus 2 varnostno povezani priključki spredaj, s povezovalnimi cevmi do vlečne enote Parkirne vtičnice za ABS/EBS in zračni priključek na prijemni vilici oziroma vlečni palici 24 voltov EBS, elektronski zavorni sistem z vtičnico EBS spredaj Modul za informacije o prikolici, za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena razdalja in diagnostična/sistemska sporočila #Elektrika 24 voltov, večprostorne luči LED, stranska rumena LED osvetlitev, osvetlitev registrske tablice LED 2 beli pozicijski luči spredaj, LED 2 belo/rdeči luči za ohranjanje voznega pasu zadaj, LED Parkirne vtičnice za elektriko na prijemni vilici oziroma vlečni palici Opozorilni znaki, osvetljeni z LED in izvlečni do 3000 mm #Talna površina Dvignjeni del spredaj s prevleko iz jekla/profilirane pločevine Predal potopljen v nagibni površini proti dvignjenemu delu Nato s približno 70 mm mehke lesene talne obloge, v območju blatnikov jeklena/profilirana pločevina

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.000 kg, največja dovoljena obremenitev: 22.000 kg, skupna masa: 29.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.170 mm, skupna dolžina: 11.700 mm, skupna širina: 2.550 mm, skupna višina: 2.650 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Konfigurirajte Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni željam strank. Dodatne informacije Podvozje Varjena konstrukcija iz drobnozrnatega jekla, sedelna plošča z zamenljivim 2. zatičem (kraljevski zatič), z dvema položajema zatiča Zunanja šasija rahlo stožčasta s Load-Lock profilom za pritrditev napenjalnih trakov 2 para priveznic (zank za privez) v zunanjem okviru na labodjem vratu v utoru, vsaka 5 t 8 parov priveznic v zunanjem okviru na spuščeni površini (tiefbett), vsaka 5 t 24 t dvostopenjski podporni vitel, enostransko upravljanje, s ravnim podstavkom, brez kompenzacije potiskov 2 priložena zagozda s pritrditvijo Bočna zaščita iz aluminija Zaščita pred podvozjem iz jekla Četrtinski blatniki pred in za osnim agregatom 2 zabojnika iz nerjavečega jekla, b=600/h=400/t=500 mm, z ogledalno-polirano zaklepno vrata 2 para žepov za vložne kolike v zunanjem okviru na labodjem vratu, notranja mera 70 x 40 mm 6 parov žepov za vložne kolike v zunanjem okviru v spuščeni površini (tiefbett), notranja mera 70 x 40 mm Notranja širina med koli: 2.420 mm 3 vezne/palice za zavezovanje v spuščeni površini, prečno v tleh preko celotne širine do zunanjega okvirja, približno 100 mm visoko. Z 20mm okroglimi jeklenimi letvami, zgoraj in spodaj, razdalja zgoraj-spodaj približno 60 mm. Spodaj z kotnim profilom kot zaključek, deloma odprto navzdol. Za fiksiranje in vstavljanje koli 80 x 80 mm. Št. vstavljivih koli B=80/ T=50/ L=1200 mm, vroče pocinkane Št. vstavljivih koli B=80/ T=80/ L=1200 mm, vroče pocinkane Mehanična zadnja izvlečna plošča z ročno ročico, izvlečljiva približno 1.500 mm, z zaporo vsakih 500 mm, z nosilnim tramom, v težišču bremena: pri 500 mm obremenljivo z 2.000 kg čez celotno širino, pri 1.000 mm z 1.000 kg in pri 1.500 mm z 500 kg, vključno z izvlečno zaščito podvozja z osvetlitvijo 2 para vstavljivih koli B=80/ T=80/ L=1200 mm, vroče pocinkane Odprti prostor za shranjevanje vstavljivih koli, na prednji steni ali pod nakladalno površino (za 10 vstavljivih koli 80 x 50 x 1200 mm in 4 koli 80 x 80 x 1200 mm) Osi in vzmetenje SAF osi z bobnastimi zavorami Lasermerjeno podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Zadnja os vodljiva, z avtomatsko blokado za vzvratno vožnjo prek vzvratnih luči, dodatna blokada prek gumba na vozilu Zračno vzmetenje z ventilom za dvig in spust Kolesa in pnevmatike 235/75 R 17,5 po izbiri proizvajalca Jekleni platišča v dvojni montaži, tovarniška srebrna barva Zavorni sistem Dvovodna pnevmatska zavorna naprava Parkirna zavora z vzmetnim akumulatorjem 2 proti zamenjavi varna spojna glava spredaj, brez povezovalne cevi EBS, elektronski zavorni sistem z EBS vtičem spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo se sme vleči le z vlečnimi vozili, ki zagotavljajo delovanje ABS! Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini; tovornjak mora biti ustrezno pripravljen, ni vključno z vgradnjo v tovornjak Elektrika 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 bele pozicijske luči spredaj 2 kombinirani bele/rdeče označevalne luči zadaj 2 x 7-polna vtičnica spredaj, brez povezovalnega kabla 2 dodatna LED delovna žarometa zadaj, vezana na vzvratno luč Dkjdpsi Ri Hvjfx Aqqsr 1 LED rotacijska opozorilna luč z nosilcem, vključeno na parkirno luč (luč snemljiva) dodatna 7-polna vt...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.860 kg, največja dovoljena obremenitev: 23.140 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.538 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Prilagojena rešitev za prevoz Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema potekata individualno, po željah stranke. *Podvozje, sedelna prikolica, prevozniško podjetje* Fino zrnata jeklena varjena konstrukcija, sedelna plošča z dvema zamenljivima sedelnima klinom Zunanji okvir rahlo nagnjen, nova izvedba z Load-Lock profilom za pritrditev zategovalnih trakov 24 ton, dvostopenjski dvižni mehanizem, upravljanje z ene strani, s pravim spodnjim delom, brez kompenzacije potiska Prostokotni pritrdilni oporni profil oziroma prosti radij gibanja nazaj približno 1920 mm 2 podložna klina z držalom Stranski odbijač iz aluminija Spodnji odbijač iz jekla Delni blatniki spredaj in zadaj za vsako osjo 1 nosilec za rezervno kolo za 1 gumo, s pritrdilnim kompletom za kolo 1 plastična orodjarna škatla, z vložkom, š=620/v=360/g=440 mm, zaklenljiva z vložkom (ključavnica ni vključena v dobavo) *Osi + vzmetenje* Bobnaste zavore, izbira proizvajalca Laserjsko merjenje osi/podvozja, zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje *Zavorni sistem* Dvodelni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Zavora s pomnilnikom vzmetne energije Duomatic priključek spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Dsdpokv Uvzofx Aqqekr Pozor: priklopno vozilo lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z ventilom za dvig in spuščanje Sistem za stabilnost vozila med vožnjo *Kolesa in pnevmatike* 235/75 R17,5, izbira proizvajalca Jeklena platišča, tovarniška srebrna barva *Elektrika* 24 voltov, večkamrne luči, stranska rumena LED osvetlitev 2 beli pozicijski svetili spredaj 2 bela/rdeča stranska gabaritna svetila zadaj 1 x 15-polna vtičnica spredaj, brez povezovalnega kabla *Pod* Plasti iz sitotiska, debeline približno 30 mm, za visoko točkovno nosilnost, za obremenitev osi viličarja do največ 5600 kg Prednja stena / nosilci v kotih spredaj 25 mm aluminijast votel profil, približno 1350 mm visok, nosilci v kotih iz jekla v volumenski izvedbi *Država registracije/nalepke* Nemčija z odobritvijo in poročilom Dekra (v skladu z §13 EG - FGV) 24-urna servisna telefonska številka pripravljeno za pritrditev registrske tablice v eni vrstici Obrobna označba z odsevnim trakom v skladu z ECE R 048, stranska bela in zadnja rdeča *Lakiranje* Okvir vroče pocinkan ali lakiran po želji stranke Prednja stena iz aluminija

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.040 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.020 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno po željah strank. Podvozje Jeklena varjena konstrukcija z ozkimi razmiki prečnih nosilcev in v ojačani izvedbi, profil zunanjega okvirja nizkopodno prikolico, za prevoz gradbenih strojev do 32.000 kg in največje zunanje širine strojev 2.550 mm, sedlasta plošča z zamenljivim drugim kraljevskim zatičem. Zadnji naklon približno 1.200 mm in 7°. Rampna os zgoraj zaprta z jeklom/ribano pločevino. V globokem ležišču so na spodnji strani zunanji okvir O profilne letve za pripenjanje ponjave in distančnikov za pritrdilne kline, ne na območju koles. Pri dvižni mizi dodatni lahek zunanji okvir z O profilom. 24 t dvostopenjsko podporno dvigalo z enostranskim upravljanjem, s polkrožnim spodnjim delom in ravno priključno ploščo, s kompenzacijo potiska, prosti zadnji radij kovanja cca 1.950 mm. Zložljiva zadnja podpora 2 zagozdi za kolesa + nosilec Bočna zaščita proti naletu iz aluminija Četrtinske blatnike pred in za vsako osjo z zaščito pred škropljenjem za vsako osjo Spodnja zaščita proti naletu iz jekla Zadnja zaščitna zavesa čez celotno širino 4 nerjavni zaboji za orodje, širina=800/višina=350/globina=350 mm, s poliranimi vrati, zaklepni, 2x levo in 2x desno pred 1. osjo Dvižna miza za gosji vrat, dolžina cca. 3.000 mm, hidravlično dvižna za prehod čez gosji vrat, z mehansko blokado v dvignjenem stanju (cilinder poševno za dobro oddaljenost od tal, Fliegl standard). Upravljanje na desni strani + dodatno upravljanje z radijskim daljincem. Dvižna miza dvižna tudi z zaprto ponjavo! Pripenjanje ponjave na območju dvižne mize na dodaten lahek zunanji okvir z O profilom, dvižna miza dvižna z zaprto ponjavo! Pritrdilne klinaste zanke uporabne tudi v spuščeni poziciji! Pritrdilne ušesce Gosji vrat: 4 para 5-tnih pritrdilnih ušes vgrajenih v zunanji okvir 2 para pritrdilnih klinastih zank zgoraj in ob straneh v zunanjem okvirju 8 parov pritrdilnih klinastih zank zgoraj in ob straneh v zunanjem okviru po 10 t 9 parov 5t vgrajenih v zunanji okvir Preme in vzmetenje SAF osovine z bobnastimi zavorami zadnja os krmiljena, z avtomatsko blokado za vzvratno vožnjo preko vzvratne luči in dodatno ročno blokado na vozilu Zračno vzmetenje z ventilom za dvig/spust in funkcijo auto-reset Funkcija H&S s hitro izpraznitvijo 1. os avtomatsko dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju (deluje do prekoračitve obremenitve osi za 30 % in do hitrosti največ 25 km/h) Dviganje osi pod priporočeno voznimi višino, ni garancije za poškodbe pnevmatik Kolesa in pnevmatike 235/75R17,5 od vodilnih proizvajalcev Jekleni platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem 2-žilni tlačni zračni zavorni sistem Vzmetno vzdrževana parkirna zavora 2 neizmenljivi priključni glavi spredaj EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Dkodpfx Aei Riw Ajqqor Opozorilo: priklopna prikolica se sme vleči le z vozili, ki zagotavljajo učinkovitost ABS! Prepoznavanje osne obremenitve na tovornjaku preko EBS, brez tovornjakove vgradnje. Elektrika 24 voltov, večkomorni žarometi, stranska rumena LED osvetlitev 2 bela LED pozicijska svetila spredaj 2 bela/rdeča LED robna svetila zadaj 1 rotacijska svetilka z nosilcem, upravljanje preko pozicijske svetlobe (svetilka snemljiva) 2 para opozorilnih tabel, podvojene, LED osvetljene in izvlečne do 3.000 mm 2x 7-polni in 1x 15-polni neizmenljivi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.100 kg, največja dovoljena obremenitev: 34.900 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mounts: 1 x 20-foot container central (or swap body container 7.15 / 7.45 m), fixed at the front, container lock twistlocks in extended version 24 t 2-speed landing gear, single-sided operation with anti-spray mudflaps according to EC standards Stainless steel drip tray with 1 1/4" drain pipe + 1 1/4" shut-off valve, incl. drip plate, perforated tread plates approx. 400 mm wide, left & right between drip tray and main longitudinal beam 4 hose racks approx. 4,500 mm long (hose box) for hose tubes: 2 x DN 200 outside + 2 x DN 160 centred, rear hose box (stainless steel) 300 mm deep, splash water protected, lid (stainless steel) all-round rubber seal, drainage hole at lowest point, then without lid on hose tubes 1 stainless steel grounding lug at the rear right side of the frame, with international grounding sticker on the frame Access steps right rear on underrun guard, rear right outside on main beam with tread plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment: reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and start assist, operated by 3x brake activation Braking System 2-line air brake system Colour-coded pneumatic lines for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: Trailer must only be towed by tractors that ensure ABS functionality! With lift & lower valve Vehicle stability control system Axle load recognition via EBS CAN-bus signal, for display in cab (truck must be pre-equipped), not calibrated as a weigh scale Wheels and Tyres 385/65 R22.5, manufacturer as per supplier’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red marker lights at rear 1 x 15-pin socket at front, without connection cable Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight within the permissible axle/support/kingpin loads may not be achievable (poor driving and trailing performance may result from incorrect load distribution) This vehicle may only be loaded with 20’ tank containers complying with ISO 668 and especially ISO 1496-3! Tank containers must have 'end-load-transfer areas' (end transverse beam load transfer areas)! Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Dsdpfx Aji Rixkjqqjkr Prepared for single-line license plate holder Warning plate to ECE 70 Inspection according to ADR sec. 9.1.1.2, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3), with warning panel at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Conspicuity marking with reflective tape

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.840 kg, največja dovoljena obremenitev: 21.160 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.050 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 12.200 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are individually tailored to customer specifications. Chassis: Semi-trailer for freight forwarding Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin, reinforced attachment point for 'gallows' mount and robust wear plates around the area. Rear coupling rail for aluminium ramps. Outer frame: Slightly tapered, new design with 'Load-Lock profile' for lashing strap attachment. 'Patented Load-Lock-Cross' for lashing strap attachment, cross-member beneath the outer frame, 24 t. 2-speed landing gear, single-sided operation, with straight lower section, without compensating cylinder, free landing leg base or free rear swing clearance approx. 1920 mm, without supports, 2 wheel chocks with holders, aluminium side underrun protection, steel rear underrun protection, quarter-round mudguards in front of and behind each axle, without impact guard, spare wheel holder for 1 spare wheel, with wheel fixing kit, spare wheel matching main tyre brand, steel rim. Plastic toolbox with shelf, width=620/height=360/depth=440 mm, lockable with padlock. Axles & Suspension: Drum brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption. Non-steering, air suspension, without lift axle. Brake system: 2-line pneumatic brake system. Colour-coded piping for easier maintenance, spring-loaded parking brake. 2 non-interchangeable coupling heads front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front (no connecting cable). Note: The trailer may only be towed by tractors capable of ensuring ABS efficacy! With raise/lower valve, vehicle stability control. Wheels & Tyres: 205/65 R17.5, make at manufacturer's discretion, rated for 8 t axle load at 80 km/h, steel rims, factory silver. Electrics: 24 Volt, multi-chamber lights, yellow LEDs on the sides, 2 white position lamps at the front, 2 white/red lane-keeping lamps at the rear, 1 x 15-pin socket front (no connecting cable), LED work lamp in angled section (switched via reversing light), if technically feasible, additional LED work lamp at rear, switched via reversing light. Floor: Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity for forklift axle load up to max. 5600 kg. Front wall / Front corner stanchions: 25 mm aluminium box section, 1,350 mm high, steel corner stanchions in volume design. Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are individually tailored to customer specifications. Dksdpfx Aqezb Ikfeqor

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised transport solution Configure your Fliegl vehicle according to your specifications. The vehicle shown is an example. Production and equipment are tailored individually to customer requirements. Chassis – Semi-Trailer for Forwarding Companies High-tensile fine-grained steel welded construction in lightweight design, kingpin plate with replaceable 2'' kingpin, main frame reinforcement for 25 t capacity, centred over 3 m loading length when retracted. 13 pairs of welded lashing hooks on the cross members for securing straps 23 pairs of recessed lashing rings in the outer frame, each rated at 3.5 t Outer frame fitted with Load-Lock profile for strap attachment Note! Not usable with side boards! 24 t, two-speed landing gear, reinforced version for uncoupling under load, single-sided operation Wheel chocks with holders Aluminium side underrun protection Rear underrun guard Half-shell mudguards with anti-spray flaps according to EU regulations 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit 1 closed stanchion storage box, open at the top, fitted under the loading platform, doors on both sides, width=450 mm / height=400/420 mm / length=2460 mm 6 pairs of extendable stanchion sockets for 80x80 mm box-section stanchions, extendable from load width 2000 mm to 3100 mm 4 pairs of recessed stanchion sockets in the outer frame for 80x80 mm box-section stanchions 11 recessed stanchion sockets in the centre of the floor for 80x80 mm box-section stanchions, with reinforcement beams, installed between the outer stanchion sockets 5 x 3 pairs of stanchion sockets recessed into the outer longitudinal beams for 80x80 mm box-section stanchions, with reinforcement - for securing loads in the forward and rear direction during transport of reinforcing mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, with rope guide at the top for belt tensioning 12 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, each with welded lashing ring at the bottom on both sides Note: Stanchion sockets/plug-in stanchions are not designed for sole load securing of long parts, pipes, etc. without lashing 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) 6 construction steel winches with wire rope and reverse hooks, with rope guide through outer frame, 1 removable plug-on gearbox for steel winches supplied loose Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable at approx. every 500 mm Locking via pneumatic pin system + frame locking indicator on both sides, operated via hand button. Controls for brake/lock and suspension on front left (driver’s side) in front of the axles Storage compartment between the longitudinal beams when extended Axles & Suspension SAF disc brake axles, 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reverse light, additional locking on vehicle via hand button and manually via switch in towing vehicle (Pin 10), without truck installation required Axle spacing offset Air suspension First axle with automatic lift function, additionally electrically operable from the truck, with start assist Braking System Dual-circuit compressed air braking system Djdpfji Ri Szex Aqqjkr Colour-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front EBS make at manufacturer’s choice, Electr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.680 kg, največja dovoljena obremenitev: 35.320 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 15.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is just an example. Production and equipment are customized to meet each customer’s needs. Chassis Lowbed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin 24 t, two-speed landing gear, single-sided operation, with straight base, without shift compensation Rear supports, foldable 2x wheel chocks with holders Aluminum side underrun protection Quarter-shell mudguards in front of and behind axle assembly With splash guards behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted transversely at the front of the gooseneck, with 2 storage trays Extendable widenings up to 3,000 mm (not on rear slope) (the track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden beams on the gooseneck, transverse at the front 70 mm wooden beams for extending to 3,000 mm Digger boom recess over the rear axles, extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low loader 3 pairs of lashing eyes rated at 10 t each in front on the gooseneck, 8 pairs at 10 t each in the lowbed, 3 pairs of lashing rails in the track area of the lowbed, 3 pairs of lashing eyes at 10 t each in the axle/rear area Axles and suspension SAF drum brake axles Axles/chassis laser-aligned: reduces tire wear and fuel consumption With steering axle Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system Two-line compressed air braking system, colored pipes for easier service Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer must only be towed by tractors that ensure ABS functionality! 2 foolproof coupling heads at the front, without connecting line With lift & lower valve, hold function in lower position + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be properly prepared, no truck installation, not a certified scale) Vehicle stability system Trailer Info Center, for displaying vehicle data such as axle loads (not a certified scale), mileage, and diagnostics/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front 1x additional LED work light at the rear 1x LED beacon with holder, controlled via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck with steel/chequer plate cover 70 mm softwood flooring in the track area, steel/chequer plate in wheel arch area, lowbed left and right in track area hydraulically liftable via truck PTO Rear slope with 70 mm softwood flooring Lowbed length approx. 6,300 mm Side boards 25 mm aluminum hollow section, 400 mm high, insertable at the front and sides of the gooseneck Loading ramps Steel ramps, 2,800 mm long, 750 mm wide Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is for illustrative purposes. Production and equipment will be tailored individually according to customer specifications. Dkodpoi Ri Hgjfx Aqqsr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Dodpsi Ri Hcsfx Aqqekr Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Djdpowgghnsfx Aqqskr Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Višina: 0,70 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Dsdpjnzlg Djfx Aqqokr Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: novo, lastna masa: 1.100 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 2.000 mm, ANHÄNGERWIRTZ, spletna trgovina, kjer lahko kupite svoj novi prikolico, ponuja vrhunske znamke! Več kot 850 novih prikolic na zalogi in več kot 130 rabljenih prikolic, ki so stalno na voljo. Prodaja 24 ur na dan prek naše spletne trgovine na trailershop. Djdpfxozmrg Te Aqqjkr Neobvezni primer: nova proizvodnja hladilnega prikolice Pluskühler Cargo Therm TFI 430T s hladilno enoto 220 V, Govi Arktik 2000 N, 430x180x200 cm, 2700 kg, tandem podvozje, V-okvir, sendvič poliestrski nadgradnja, bela, izolacija Källtebrückenfrei 54 mm XPS, pod 60 mm izoliran, aluminijasta rebrasta pločevina, primerna za živila v skladu s standardom HACCP, zaščita pred udarci, pritrdilna letev, krilne vrata z dvojnim varnostnim vrtljivim zapahom in stranska vrata na desni strani, 4 opore in dodatna oporna kolesa, ojačano ... Prodaja po telefonu ali po dogovoru na našem prodajnem mestu med našimi odprtimi urami. Prodaja: pon.-pet. ali 24 ur na dan prek naše spletne trgovine na trailershop.de. Vsebina in slike so zaščitene z avtorskimi pravicami – logotipi, zaščita znamke 07/26.

Stanje: novo, lastna masa: 1.100 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 2.000 mm, Leto izdelave: 2025, ANHÄNGERWIRTZ, spletna trgovina, kjer lahko kupite svoj novi prikolico, ponuja kakovostne izdelke znanih proizvajalcev! Na zalogi imamo več kot 850 novih prikolic in več kot 130 rabljenih prikolic, ki so nenehno na voljo. Prodaja poteka 24 ur na dan prek naše spletne trgovine na trailershop. Dksdjzlxk Aepfx Aqqer Nezavezujoč primer: Nova hladilna prikolica Pluskühler Cargo Therm TFI 430T s hladilno agregat 220 V Govi Arktik 2000 N, velikosti 430x180x200 cm, skupna teža 2700 kg, tandem os, nizkopodvozna konstrukcija, V-okvir, stene iz sendvič poliestra, bele barve, toplotna izolacija 54 mm XPS, talna izolacija 60 mm, aluminijasta valovita pločevina, primerna za živila v skladu s standardom HACCP, zaščita ob robovih, pritrdilna letev, krilna vrata z dvojnim varnostnim zapahom in stranska vrata na desni strani, 4 opore in močnejše podvozno kolo. Na voljo je veliko različic. Prodaja poteka po telefonu ali po dogovoru v naših poslovalnicah v času naše odprtosti. Prodaja: od ponedeljka do petka ali 24 ur na dan prek naše spletne trgovine na trailershop.de. Vsebina in slike so zaščitene z avtorskimi pravicami – logotipi in blagovne znamke so zaščitene (07/26).

Stanje: rabljeno, prevoženi kilometri: 755.908 km, moč: 265 kW (360,30 KM), prva registracija: 05/2009, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 12/2024, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 5, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, Leto izdelave: 2009, Oprema: ABS, klimatska naprava, parkirni grelec,

Stanje: novo, lastna masa: 1.100 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 2.000 mm, Leto izdelave: 2025, ANHÄNGERWIRTZ, online vyzdvihovací trh pro Váš nový přívěs, nabízí silné značkové výrobky! Více než 850 nových přívěsů skladem, více než 130 použitých přívěsů stále v nabídce. Prodej 24/7 přes náš e-shop na trailershop. Nezávazný příklad: Nový chladící skříňový přívěs Pluskühler Cargo Therm TFI 430T s chladící jednotkou 220 V Govi Arktik 2000 N, 430x180x200cm, 2700kg tandem nízko ložný podvozek V rám, sendvičová polyesterová nástavba bílá, bez tepelných mostů, 54mm XPS izolovaný, podlaha 60mm izolovaná, hliníkový slzičový plech dle HACCP – vhodný pro potraviny, nárazník, kotvící lišta, dvoukřídlé dveře s dvojitým bezpečnostním tyčovým uzávěrem & bočními dveřmi vpravo, 4 podpěry a zesílené opěrné kolo... Mnoho variant skladem Prodej telefonicky nebo po domluvě na místě během otevírací doby Prodej: PO–PÁ nebo 24/7 prostřednictvím našeho e-shopu na trailershop.de Obsah a obrázky podléhají autorským právům – loga jsou ochrannou známkou 06/26 Dkjdpezak Rrsfx Aqqor

Stanje: novo, lastna masa: 1.100 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 2.000 mm, Leto izdelave: 2025, ANHÄNGERWIRTZ – online výdajné miesto pre váš nový príves – ponúka silné značkové produkty! Viac než 850 nových prívesov na sklade a viac ako 130 použitých prívesov neustále v ponuke. Predaj nonstop prostredníctvom nášho online obchodu na trailershop. Nezáväzný príklad: Nový chladiarenský boxový príves Pluskühler Cargo Therm TFI 430T s chladiacou jednotkou 220 V Govi Arktik 2000 N, 430x180x200 cm, 2700 kg tandem nízkozdvižný podvozok, V-rám, biela sendvičová polyesterová nadstavba bez tepelných mostov, 54 mm XPS izolácia, podlaha izolovaná 60 mm, hliníková podlaha podľa HACCP vhodná na potraviny, ochrana proti nárazu, kotevná lišta, krídlové dvere s dvojitým bezpečnostným závorovým zámkom & bočné dvere vpravo, 4 vystužené oporné nohy a oporné koleso… Množstvo variant k dispozícii. Dkedpfoy Ub I Sjx Aqqor Predaj telefonicky alebo po dohode osobne počas našich otváracích hodín. Predaj: PO – PIA alebo nonstop cez náš online obchod na trailershop.de Obsah a obrázky sú chránené autorským právom – logá sú registrovanou ochrannou známkou 05/26.

Stanje: novo, največja dovoljena obremenitev: 26.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, WIESE 3-axle low-loader with ramps and wheel recesses ? NEW Availability approx. 4 months from order ---- Vehicle data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth-wheel load: 12,000 kg * Aggregate axle load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS ---- Dimensions * Load bed length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth-wheel section: approx. 3,640 mm * External width: 2,550 mm * Bed height low-bed: approx. 920 mm * Fifth-wheel height: approx. 1,250 mm ---- Equipment * 3 x SAF axles (9 t) with air suspension * 1st axle with lift function * 3rd axle with trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2 x 7-pin sockets ---- Bodywork Dkjdpfx Aoyuq Igoqqor * Sturdy steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings 8,000 kg * Additional lashing points 5,000 daN * 2 pairs of wheel recesses * Digger arm recess * Aluminium plug-in side boards on the raised deck * Toolbox at the front ---- Ramps * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting system * Sideways adjustable ---- Miscellaneous * Warning boards for overwidth up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV certificate For further information, we are happy to assist you.

Stanje: novo, lastna masa: 1.100 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 2.000 mm, Leto izdelave: 2025, ANHÄNGERWIRTZ, spletni prevzemni center za vaš novi prikolico, nudi močne blagovne znamke! Več kot 850 novih prikolic na zalogi, več kot 130 rabljenih prikolic stalno v ponudbi. Prodaja 24/7 preko naše spletne trgovine na trailershop. Neobvezen primer: Nova hladilna zabojna prikolica Pluskühler Cargo Therm TFI 430T s hladilno enoto 220 V Govi Arktik 2000 N, 430x180x200cm, 2700kg tandem nizek nakladalec, podvozje V-oglede, bela poliestrska sendvič konstrukcija brez toplotnih mostov, 54mm XPS izolacija, tla izolirana 60mm z aluminijastim rebrastim pločevinastim premazom po HACCP za živila, zaščita proti udarcem, zavezna letvica, dvokrilna vrata z dvojnim varnostnim zapiralom vrat ter stranskimi vrati na desni, 4 nosilci in okrepljeno podporno kolo .... Veliko različic na voljo. Prodaja po telefonu ali z obiskom na kraju samem v času delovanja. Prodaja: PON. - PET. ali 24/7 preko spletne trgovine na trailershop.de. Vsebina in slike so avtorsko zaščitene – logotipi zaščiteni kot blagovna znamka 11/25. Dkedpfx Ajxzzfbeqqer

Stanje: rabljeno, Leto izdelave: 2005, dolžina zabojnika: 24 čevelj, skupna masa: 16.000 kg, lastna masa: 3.250 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.720 mm, številka stroja/vozila: 610272 8, JUMBO BDF swap body / swap box with roller shutter * Corrugated steel box * Crane- and stackable * Length: 7.45 m * Roller shutter * Interior with keyhole plate * Anti-slip phenolic plywood flooring * Neutral white, WITHOUT lettering! * Front guide tunnel slightly deformed * Light rust on frame and superstructure * Parking height: 1.02 - 1.32 m * Loading height at roller shutter: 2,620 mm * Overall height: 3,000 mm * New UVV safety inspection on request * Manufacturer: KRONE Dkjdpfxei Avllj Aqqor Nationwide delivery available! We always have larger quantities of various manufacturers and specifications for SALE or RENT in stock!!! All prices are net plus statutory VAT!

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm Dkodpsiu Eu Nefx Aqqer - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802037879, lastna masa: 3.250 kg, največja dovoljena obremenitev: 34.750 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 6.790 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, multiple units available Chassis semitrailer for containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mountings: Dkedjzbtnispfx Aqqjr 1 x 20-foot, flush with rear (Note! Reduced saddle load when carrying 20-foot containers) 24t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight connection plate, with compensating slide 2 wheel chocks with holders Steel underrun protection Full-width rear mud flap Half-shell mudguards with anti-spray mudflaps in accordance with EC regulations Storage box for fire extinguisher up to 6 kg Fire extinguisher (ABC powder, 6 kg) Including stainless steel drip plate, centrally positioned on the rear container crossmember, approx. 290 mm wide Axles and suspension BPW disc brake axles, with 430 mm disc diameter "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44t gross combination weight Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, actuated by "3x brake" (starting aid works up to 30% axle load exceedance and speeds up to max. 25 km/h) Braking system 2-line compressed air brake system Colour-coded piping for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24V EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! with lift & lower valve Vehicle stability system Axle load detection via EBS-CAN bus signal, display interface in cab (truck must be correspondingly pre-equipped, not installed in truck, not a calibrated scale) Wheels and tyres 385/55 R22.5" tyres, brand as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white LED position lights front 2 white/red lane marker lights rear 1 x 15-pin socket front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, it may not be achievable within the permissible axle, support or fifth-wheel loads. (Poor driving and tracking stability possible due to incorrect load distribution) Country of registration / plates Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline prepared for single-line number plate holder "A" warning sign for waste transport, foldable ADR approval for FL/AT with ADR warning sign at rear Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 2011 deep orange "10-year corrosion warranty" Support legs: coated black multiple units available

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Dedpozr Unkjfx Aqqokr

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2019, dolžina tovornega prostora: 7.200 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Printing errors, mistakes and changes excepted, sample images shown. For more details, visit: ! Dsdpfx Aqjzr Saqsqekr