Fliegl Sds 470 T 3-Achs Satteltieflader Luft Hydraulik nakup rabljenega (64.719)

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Bdedout Idnjpfx Ab Toc Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Lashing points low-loader 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Low Loader Semi-Trailer with Ramps, Type SDS 470 T Bjdpfx Abjk N Afls Tjdc Gross Weight: 41,000 kg / 47,000 kg Unladen Weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall Length: 13,300 mm Loading bed: 9,200 mm Ramps: 2,800 mm x 750 mm with spring assist Air suspension Excavator arm recess Large lashing package 70 mm hardwood flooring SAF axles, 3rd axle self-steering Plus pre-carriage / provision ex stock Wiesmoor €1,280.00 net Vehicle available immediately from stock. Hire purchase offer: Term 48 months, 40% residual value, down payment VAT only. Monthly installment EUR 999.00 (net only)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202038273, lastna masa: 5.680 kg, največja dovoljena obremenitev: 29.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 2.680 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis semi low loader for haulage Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated for 10 t 10 pairs of combined stake pockets with lashing rings (bolted), each rated for 5 t, recessed in outer frame, approx. 72 x 42 mm inner dimensions Outer frame with "Load-Lock profile" for fitting tensioning straps, approx. one hole every 400mm 24 t, 2-speed landing leg with single-sided operation Free swing radius to landing foot approx. 2,500 mm, landing foot width approx. 2,600 mm Extension ladder at rear 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Spray flaps at the rear over entire width Quarter mudguards in front of and behind axle assembly With antispray mudflap only on rearmost axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable In front of axles, 1x left, 1x right 1 storage box, full width, closed, beneath loading floor, approx. w=450 mm/h=400 mm/d=2,460 mm, mounted directly in front of axles 3 tie-down/stake rails with 4 pairs of locking cut-outs, recessed transversely in floor over total width up to outer frame (max. usable internal width between outer stanchions approx. 1,782 mm), approx. 80 mm high. With cut-outs at top and bottom for lashing and fitting stakes 80 x 80 mm. Bottom with angled plate as stop, half open downward. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container lock adapters 10 combined plug-in stakes with cut-out at bottom, w=80/ d=50/ l=1,200 mm 6 plug-in stakes w=80/ d=80/ l=1,200 mm, hot-dip galvanized Axles and Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle auto lift, additionally electrically operable from tractor, including forced lowering and start aid Braking system 2-line compressed air braking system Spring-type parking brake 2 non-interchangeable couplings at front 24V EBS, electronic braking system with EBS socket at front Note: Towed vehicle may only be towed by towing vehicles that guarantee proper functioning of ABS! with raise & lower valve + auto-reset function Vehicle Stability Control System Axle load detection via EBS CAN bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims "TPMS" tyre pressure monitoring system according to ECE R 141, display via towing vehicle, through EBS Electrics Bedpfx Aszbbpusb Tedc 24 Volt, multi-chamber lamps, side yellow LED marker lights Side yellow LED marker lights linked with indicator “flashing side markers” 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 2 additional LED work lights, at rear 1 LED beacon with mounting bracket 2 pairs of LED illuminated warning signs, extendable to 3,000 mm 2 additional LED worklights, top of front wall Additional 7-pin socket in rear underrun guard Floor Slip-resistant screen printing panels approx. 30 mm thick, for high point load, suitable for forklift wheel loads up to max. 7,900 kg "Premium floor sealing", circumferentially sealed joints Front wall / corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts steel, volume design Front wall additionally lined inside with 1,250 mm high phenolic plywood "Crash Blocker", bottom inside at approx. 140 mm high, with steel impact protection

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). 2 front coupling heads, non-interchangeable, without connection line. EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Approval / Signage Registration country: Germany Bdjdpoza Anvsfx Ab Toc Type approval according to EC 2007/46 Prepared for single-row license plate holder Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee Bdjdpfx Abeza Aiye Tjc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Bdsdpfx Ajza Agrjb Tjc Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Bsdsy Ercbepfx Ab Tsdc Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Bdsdpfx Aetcwmiob Tec

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Bjdpfx Aeynvrwsb Tjdc Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Bsdpsuytx Sofx Ab Tjdc Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front Bedov D T R Ejpfx Ab Todc 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: rabljeno, največja dovoljena obremenitev: 28.070 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.990 mm, prostornina tovornega prostora: 102 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, FLIEGL SDS 350 MegaRunner RH 95, niska visina sedla - u rasponu od 930 mm do 950 mm, sanduk s ceradom i ramom sa bočnim kliznim ceradama, klizni krov, zadnja dvokrilna vrata sa šipkom za zaključavanje, priprema za utovarivač na zadnjoj strani, sertifikat o utovaru EN 12642 Code XL, pod od vodootporne šperploče, kontinuirana perforacija za vezivanje tereta na spoljašnjem ramu, 13 veznih prstena sa svake strane, šasija pocinkovana, SAF podizne noge, SAF osovina(e), ABS, EBS, disk kočioni sistem, podizna osovina, vazdušno ogibljenje sa opcijom podizanja i spuštanja. Vozilo može biti oblepljeno reklamom i/ili obeleženo natpisima. SI86658 Naša ponuda je generalno bez novog tehničkog pregleda. Ukoliko želite novi tehnički pregled, rado ćemo vam dostaviti ponudu naših partnerskih radionica! Vozilo može biti oblepljeno reklamom i/ili obeleženo natpisima. Primjenjuju se naši opšti uslovi isporuke i plaćanja. Rado ćemo za ovaj objekat izraditi ponudu za finansiranje ili lizing. Slobodno nas kontaktirajte! Bodpoyrwirjfx Ab Tsdc

Stanje: rabljeno, največja dovoljena obremenitev: 30.290 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.755 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Schubboden +/- 92 cbm, Dvojna krilna vrata sa zadnje strane sa rotirajućim zatvaračem, pristupna i stojeća platforma napred na sanduku, klizna cerada, 'Cargo Floor' pod sa 21 daskom debljine 10 mm, potpuno pražnjenje (pomera se prednji zid), funkcija uvlačenja/izvlačenja, manometar za kontrolu utovara, preklopiva zaštita zadnjih svetala, kablovski daljinski upravljač, ABS, EBS, SAF INTRA osovine, disk kočnice, vazdušno ogibljenje sa uređajem za podizanje i spuštanje, podizna osovina, podupirači, 1x sanduk za alat, nosač rezervnog točka. Vozilo može biti sa reklamnim natpisima i/ili obeleženo nalepnicama. Bdsdpfx Ajwfvqvjb Tjc

Stanje: novo, številka stroja/vozila: dc46d2e1cd272305b99fb3160, lastna masa: 9.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Vehicle consisting of: Chassis low-bed semi-trailer Steel welded construction, kingpin plate with replaceable double kingpin and two kingpin positions 24-ton, 2-speed landing gear, single-sided operation, straight lower section, without thrust compensation Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminum Quarter mudguards in front of and behind the axle assembly 1st pair of wheel recesses embedded in the low-bed drive lane area after the gooseneck, tapered for entry. Lower length approx. 1,600 mm, recess depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Lower length approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the total height needs to be checked, please provide technical data sheets of the wheel loader types with exact information (if total height is exceeded -> customer responsibility, approval required), (depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer) Wheel recess covers extendable from the main frame, with wooden inserts. Extensions extendable to 3,000 mm (not in the rear bevel and not in the lower wheel recesses). (The track width of construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm.) Storage compartment for wooden planks on the gooseneck, crosswise at the front 70 mm planks for extension to 3,000 mm Lashing eyes low-bed trailer 2 pairs of ring lashing eyes, each 5t at the front on the gooseneck 11 pairs of lashing mushrooms recessed at the top and side in the external frame, each 10t 2x on gooseneck, 9x distributed on low-bed platform; first lashing point 250 mm from the front and last at max. 250 mm from the rear, distance between lashing points no greater than 1,100 mm 8 pairs of stake pockets recessed in the external frame, internal dimensions 70 x 40 mm, or instead of stake pockets, 5t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires Bsdpfxoi Ri Hcs Ab Tsdc 235 / 75 R 17.5 as per manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connecting line with lift & lower valve Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-equipped accordingly, not installed on truck; not a calibrated scale) Vehicle stability control system Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane mark lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without connection cable 1 x LED beacon with holder, switched via parking light (lamp removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/chequer plate covering Storage box embedded in the sloped transition to gooseneck Then with 70 mm softwood floor; in the lower wheel recesses and w

Stanje: novo, številka stroja/vozila: 2428b2018baf171e60fef6740, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis for Low-bed Semi-Trailer Steel welded construction, king pin mounting plate with interchangeable 2 kingpins and 2 kingpin positions, 24 t, 2-speed landing gear, single-sided operation, with straight lower frame, without compensation for extension Rear folding support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Fenders in front of the 1st axle and behind each axle, with anti-spray as per EU regulations Extendable outriggers to 3,000 mm (not at the rear incline) (track width of construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Tie-down points, low-loader 2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck 11 pairs of lashing mushrooms, recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck 9 x distributed in the low-bed area Bdjdpfei Ri E Rox Ab Tec First lashing eye 250 mm from front, and last max. 250 mm from rear; spacing between lashing eyes no greater than 1,100 mm 8 pairs of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Wheels and Tyres 235 / 75 R 17.5, make per manufacturer's choice Steel twin wheels in factory silver Braking system 2-line compressed air brake system Colour-coded piping layout for easy maintenance Spring-loaded parking brake EBS (Electronic Braking System) with EBS socket at the front, no connection cable Note: This trailer may only be towed by vehicles capable of ensuring the ABS function! 2 mistake-proof coupling heads at the front, no connection line With lift & lower valve Axle load detection via EBS CAN bus for display in cab, compatible truck required, no truck installation (not a certified weighing system) Vehicle stability control system Electrics 24 volts, multi-chamber lights, side LED marker lights (yellow) 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin mistake-proof sockets at the front, no connection cables 1 LED beacon with holder, switched via sidelights (removable beacon) 2 pairs of double LED illuminated warning boards, extendable to 3,000 mm Flooring Gooseneck with steel plate covering Storage box built into the slope to the gooseneck then with 70 mm softwood flooring, in wheel arch area with steel/tread plate covering Rear incline with 70 mm softwood flooring Low-bed area including rear incline: 9,200 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered Hydraulically operated via tractor PTO with restrictor, controls on left side (driver’s side) in front Hydraulic connection with SVK coupling NW 10/3, without hose Operating instructions For axle loads of 10,000 kg, an exceptional permit is required, only indivisible loads permitted!!! Special permit required if 40 t gross combined weight is exceeded! The total weight specified is technically feasible; depending on the load, the total weight may not be achievable while adhering to permissible axle, support, and fifth wheel loads. (Poor handling and tracking possible due to incorrect load distribution) If applying for an exceptional permit for heavy haulage vehicles subject to authorization, an axle load indicator i

Stanje: novo, številka stroja/vozila: 364a8214fd0c4afa2b936c7db, lastna masa: 11.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2" kingpin and 2 kingpin positions (not in combination with forced steering) 24 t, 2-speed landing gear, single-side operation, with semi-circular lower part and straight connector plate, with load compensation Foldable rear support Wheel chocks with holders Aluminum side underrun protection Splash guards in front of the first axle and behind each axle, with anti-spray, according to EU standards Stainless steel toolbox, width=600 / height=400 / depth=500 mm, with polished lockable door Lifting table behind gooseneck, approx. 3000 mm long, hydraulically liftable for transition over gooseneck, with mechanical locking in raised position. Operated by remote control Electric winch, 24 volt, 8165 kg pulling force, mounted centrally at the very front of the load area on the gooseneck, installed in stainless steel box with door (subject to technical feasibility, to be checked in detail), operated by remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers on the gooseneck and rear incline Lashing eyes low-loader: Gooseneck: 5 pairs of lashing eyes integrated into the outer frame, each 5 t. 2 pairs of lashing eyes in the center, each 5 t. 1 pair of lashing points at the top and outside in the outer frame in the neck incline, each 10 t Deck: 4 pairs of lashing eyes integrated into the outer frame, each 5 t. 4 pairs of lashing eyes in the center, each 5 t. 1 pair of lashing points at the top and outside in the outer frame, each 10 t Lowered bed: 4 pairs of lashing eyes integrated into the outer frame, each 5 t. 5 pairs of lashing eyes in the center, each 5 t. 4 pairs of lashing points at the top and outside in the outer frame, each 10 t Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reverse light and additional locking function on the vehicle via hand knob Air suspension with raise & lower valve, hold function for lowering & auto reset function Wheels and Tires 235 / 75 R 17.5 by manufacturer’s choice Steel rims in twin arrangement, factory silver Brake system Bdodpfx Aji Ri E Uob Toc 2-line compressed air brake system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS CAN bus signal for display in the driver’s cab (truck must be suitably equipped; not for trucks—no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Electrics 24 Volt, multifunction lights, yellow LED side lighting 2 white position lights at the front 2 white/red track marker lights at the rear All lights in full LED version (note: Some tractors may show diagnostic errors despite full function) 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cables Additional LED work light at the rear, switched via reverse light LED beacon with bracket, switched via parking light (removable beacon) Pair of warning boards, double LED illuminated and expandable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Grip serrated grating Low-bed area covered with Mega Grip serrated grating Rear incline covered with Mega Grip serrated grating

Stanje: rabljeno, lastna masa: 7.300 kg, največja dovoljena obremenitev: 37.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 --/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 --/140J, velikost zadnje pnevmatike: 235/75R17,5 --/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Reinforced design, high bed length approx. 4,180 mm, low bed length approx. 9,400 mm, loading height approx. 900 mm, 12 stake pockets in the outer frame, 3 cross stake bars, 14 lashing eyes, 4 pairs of container locks for either 2 x 20 ft ISO containers or 1 x 40 ft ISO container, -- Subject to misprints, errors, and changes, sample images --, More data available at: !, More details: ! Bdedpfx Abjzaclzo Tec

Stanje: novo, lastna masa: 8.050 kg, največja dovoljena obremenitev: 36.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vroče pocinkano, ojačana izvedba, zračno vzmetenje z dvigalno osjo, manometer za osno obremenitev, dolžina visokega ležišča cca 4.180 mm, dolžina nizkega ležišča cca 9.400 mm, višina nakladanja cca 900 mm, prednja stena cca 1.600 mm visoka, 14 rež za količke v zunanjem okviru, 3 prečne letev za količke, 24 pritrdilnih obročev, 4 pari zapiral za zabojnike za 2 x 20 ft. ISO zabojnika ali 1 x 40 ft. ISO zabojnik, doplačilo za alu rampe = cena: 1.900 €, -- tiskarske napake, pravica do sprememb in napak pridržana, vzorčne slike --, Več podatkov na: !, More Details: ! Bedpjy U Hzqjfx Ab Tedc

Stanje: novo, lastna masa: 8.050 kg, največja dovoljena obremenitev: 36.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vroče pocinkano, ojačana izvedba, zračno vzmetenje z dvigalno osjo, manometer za osno obremenitev, dolžina visokega ležišča cca 4.180 mm, dolžina nizkega ležišča cca 9.400 mm, višina nakladanja cca 900 mm, prednja stena cca 1.600 mm visoka, 14 rež za količke v zunanjem okviru, 3 prečne letev za količke, 24 pritrdilnih obročev, 4 pari zapiral za zabojnike za 2 x 20 ft. ISO zabojnika ali 1 x 40 ft. ISO zabojnik, doplačilo za alu rampe = cena: 1.900 €, -- tiskarske napake, pravica do sprememb in napak pridržana, vzorčne slike --, Več podatkov na: !, More Details: ! Bsdpfxoy Ulf Io Ab Todc

Stanje: rabljeno, lastna masa: 7.300 kg, največja dovoljena obremenitev: 37.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 --/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 --/140J, velikost zadnje pnevmatike: 235/75R17,5 --/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Reinforced design, high bed length approx. 4,180 mm, low bed length approx. 9,400 mm, loading height approx. 900 mm, 12 stake pockets in the outer frame, 3 cross stake bars, 14 lashing eyes, 4 pairs of container locks for either 2 x 20 ft ISO containers or 1 x 40 ft ISO container, -- Subject to misprints, errors, and changes, sample images --, More data available at: !, More details: ! Bdjdpfxjy Uapus Ab Tjc

Stanje: novo, lastna masa: 7.950 kg, največja dovoljena obremenitev: 37.050 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ojačana izvedba, zračno ovješena s podiznom osovinom, mjerač osovinskog opterećenja, dužina visokog ležaja cca 4.140 mm, dužina niskog ležaja cca 8.600 mm, visina utovara cca 900 mm, za 2-osovinske i 3-osovinske tegljače, prednji zid cca 1.600 mm visine, 18 x džepovi za rukohvate u vanjskom okviru, 3 x poprečne letve za rukohvate, 24 x vezne ušice, 4 para kontejnerskih bravica za, 2 x 20 ft ISO kontejnera ili 1 x 40 ft ISO kontejner, doplata za alu rampe, cijena: 1.900 €; rezervni kotač, cijena: 300 €; – tiskarske greške, zadržavamo pravo na promjene i pogreške, slike su uzorak – više podataka na:!, više detalja:! Bdjdpfxsy Sn Its Ab Tsc

Stanje: rabljeno, največja dovoljena obremenitev: 32.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2022, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Skupna teža: 39.000 kg Lastna teža: 6.300 kg Nosilnost: 32.700 kg Skupna dolžina: 13.850 mm Dolžina nakladalnega prostora: 13.650 mm Širina: 2.550 mm Višina nakladanja: ca. 1.100 mm Dodatne informacije - Notranja višina ca. 2.600 mm - Notranja dolžina ca. 13.650 mm - Notranja širina ca. 2.480 mm - Pnevmatske gume 385/65R22,5 Bjdpfx Aboywq E Se Tsdc - SAF osi - Zaščita proti podvozu - Priprava za viličarja zadaj - Zračno vzmetenje - Zadnja os krmiljena - Drsna streha "Blitz-Verdeck" - Drsni obroči - Vstavljive letvice

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 platforma z dvižno osjo, aluminijaste stranske stranice, nosilci PREVOZ JEKLA Int. št. za povpraševanja: 0326236 * ABS * EBS * 3 osi z zračno vzmetenjem * Dvižna os * Kolutne zavore * BPW osi * Aluminijaste stranske stranice * Nosilci / stebrički Dolžina tovornega prostora: Dolžina: 13.600 mm Širina: 2.520 mm Pnevmatike: 1. os: 385 / 65 R 19,5 20 % zračno vzmetenje / dvižna os 2. os: 385 / 65 R 19,5 20 % zračno vzmetenje 3. os: 385 / 65 R 19,5 20 % zračno vzmetenje ----Cena: 9.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ???? Bdsdpfx Aboyulw No Tec Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 Platto, dvigljiva os, SAF osi Int. št. za povpraševanja: 1225958 * ABS * EBS * 3-osi, zračno vzmetenje * dvigljiva os * kolutne zavore * SAF osi Dolžina tovornega prostora: dolžina: 13.600 mm * širina: 2.520 mm Pnevmatike: 1. os: 385/55 R 19,5 30% zračno vzmetenje / dvigljiva os 2. os: 385/55 R 19,5 30% zračno vzmetenje 3. os: 385/55 R 19,5 30% zračno vzmetenje ----Cena: 3.900 EUR + 19% DDV Za dodatna vprašanja smo dosegljivi na naslednjih telefonskih številkah: Bdsdpfx Abeyavigo Tec * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak v besedilu, pomot in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Bdodpfx Ajk N Adksb Tec Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye 40 mm plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00