Fliegl Dts 300 3-Achs Tiefl 6,5 Parabel Feder - 843 nakup rabljenega (40.098)

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Chassis Low-bed trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Fjdpewlmr Refx Al Hjpg Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions With 10,000 kg axle load, a special permit is required, only

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Fpsdpfx Alouytx So Hjg Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Fodpfov D T R Ejx Al Hjpg Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye 40 mm Fpjdpfx Alek N Adkj Hjg plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- Fpsdpey Izthjfx Al Heg More data at: ! More details: !

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Fpedexb Nmyspfx Al Heg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: Fedpfxotcwkrs Al Hjpg - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Fodjyxh Rzopfx Al Hjpg

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm. Equipment: - Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box recessed at the transition to the gooseneck Fodpfx Ajx Nrp Nol Hepg - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated - Ramps with spring assist - Frame hot-dip galvanised Subject to errors and changes.

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t Fsdoi Ri Ddopfx Al Hspg 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Fpjdpsynvrwsfx Al Hsg Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Fpjdpewlmr Defx Al Hsg Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Fpedpfx Aollwhnsl Hjg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. plus freight/preparation ex stock Wiesmoor €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2018, Oprema: ABS, = Dodatne opcije i oprema = - Vazdušno ogibljenje pozadi - Vazdušno ogibljenje napred = Napomene = Za sva pitanja vezana za vozilo, obratite se gospodinu Seidelu (telefon: ) rado. Fliegl DTS 300 niskopodni prikolica BPW osovine, doboš kočnice, federski akumulatori, mehaničke rampe, dozvoljena ukupna masa: 24.000 kg, težina praznog vozila: 6.350 kg, nosivost: 17.650 kg, dimenzije tovarnog prostora: dužina 8.490 mm, širina 2.510 mm, profil guma: 1. osovina 7-12 mm, 2. osovina 7-8 mm, 3. osovina 4-7 mm Na zahtev, nudimo vam ponudu za lizing ili finansiranje. Gospodin Seidel (telefon: ) vam rado stoji na raspolaganju. Više informacija možete pronaći na našoj web stranici. ... Greške, izmene i prethodna prodaja zadržane!!! - = Dodatne informacije = Težina praznog vozila: 6.350 kg Nosivost: 17.650 kg Dozvoljena ukupna masa: 24.000 kg Fpsdpfx Aloy Adc Ie Hjg Spoljašnje dimenzije: 0x2550x3500 Za više informacija obratite se Tobiasu Ebertu.

Stanje: novo, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, barva: srebrn, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva ploščad, listnate vzmeti, ABS (protiblokirni sistem), možnost razširitve na 3 m, pritrdilne zanke, nakladalne rampe v dveh delih, mehanske rampe, izvlečna vlečna gred, stranska aluminijasta zaščita, dvojne pnevmatike, EBS. Nadgradnja: dolžina nakladalne površine pribl. 8,5 m, možnost razširitve na 3,05 m. Predstavitveno vozilo! Parabolično vzmetenje z izravnavo osi zadaj, 3x 10 t SAF osi, možna dovoljena skupna masa 30 t, po dolžini nastavljiva vlečna gred. Fedpsxbttqofx Al Hopg Novo vozilo iz zaloge z enodnevno registracijo na proizvajalca! PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane!

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* Fsdpfx Aed U A Tgol Hjpg *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge*

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered Fodpfei Ri Rvjx Al Hepg With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Fjdsi Riy Ejpfx Al Hspg Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Access ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. Fodpoi Ri Ryofx Al Hopg With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Fpsdoi Ri Dlspfx Al Hsg Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake Fpodpfx Alsi Riwfe Hsg 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires Fsdpfx Aljrducpe Hopg 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Lashing points low-loader 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Fodpjut Idnefx Al Hepg Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina nakladalne površine ca: 8.800 mm, globoko ležišče ca: 6.600 mm dolgo, nakladalna višina obremenjena ca: 890 mm, 24 x pritrdilnih obročev po 10 t, 12 x žepov za količke v zunanjem okviru, nakladalne rampe (ca 4.250 x 750 mm), rampe nastavljive bočno, lesen pod 68 mm debel, zabo z pokrovom za verige za privezovanje ali pritrdilne pasove, obrisna označitev po predpisih, opozorilna rotacijska luč, vozilo cinkano s potopno kopeljo, vklj. z indikatorji obremenitve osi, doplačilo za: opozorilne table z osvetlitvijo in rotacijsko lučjo, razširitev na 3 m z lesom, cena: 500 €; poglobitev za bagersko roko = cena: 1.000 € neto, -- napake v tisku, spremembe in napake pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Fedpfx Aoy Ryaljl Hspg

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Celková dolžina nakladalne površine pribl.: 8.800 mm, poglobljeno ležišče pribl.: 6.600 mm, nakladalna višina obremenjena pribl.: 890 mm, 24 x pritrditvena ušesa po 10 t, 12 x žeplji za zaboje v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), protidrsna letvica na zunanji strani ramp in zadnjega naklona, rampe nastavljive vstran, lesena tla debeline 68 mm, skladiščna škatla s pokrovom za pritrditvene verige ali napenjalne pasove, označevanje obrisa v skladu s predpisi, rotacijska opozorilna luč, vozilo vroče pocinkano s potopno kopeljo, vključno z indikatorji osi, Doplačilo za: opozorilne table z osvetlitvijo in rotacijsko lučjo, razširitev na 3 m z lesom, cena: 500 €; hidravlično pomikanje ramp, cena: 1.000 €; izrez za bagersko roko, cena: 1.000 € neto. --- Tiskovne napake, napake in spremembe pridržane, vzorčne slike -- Več podatkov pod: !, Več informacij: ! Fodpfx Aljy Rr H Ds Hopg