Fliegl 3 Achsen Tieflader Dtl-S 300 P Agrar Plateau nakup rabljenega (65.220)

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Godpfx Acjllwhnjgobl Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. plus freight/preparation ex stock Wiesmoor €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Gedpfxjynvrws Acgsbl Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Godpfx Acoxb Nmyjgsbl Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Gsdpfewlmr Dox Acgobl Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Gjdok N Adkjpfx Acgsbl Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye 40 mm plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim Gbjdpjtcwkrsfx Acgol - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Gbodpfoyxh Rzex Acgjl

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm. Equipment: - Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box recessed at the transition to the gooseneck - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated - Ramps with spring assist Gbodpfx Aex Nrp Necgjl - Frame hot-dip galvanised Subject to errors and changes.

Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Full-width rear mudflap Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel) Low-loader lashing rings 1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t 7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t 1 x on the front gooseneck 5 x in the low-bed area 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks) 5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel Drawbar system for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles, brand as per manufacturer’s choice Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Brake System 2-line air brake system Gjdsi Ri Agspfx Acgebl Spring-loaded parking brake 2 unmistakable coupling heads at the front, with connecting lines to the truck, Connecting lines extended by approx. 60 cm No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm 1 LED beacon with holder, operated via parking light (lamp removable) 2 pairs of illuminated and extendable warning plates up to 3,000 mm Floor Front gooseneck with steel/chequer plate covering Toolbox recessed in the drive-over slant to gooseneck Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-bed loading area including rear bevel: 5,900 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wooden covering Spring-assisted lifting Operating Instructions For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!! The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible) Prepared for double-line license plate holder No contour markings / reflective tape according to ECE R 048 Painting Frame: DB 7350 Novagrau 10-year corrosion protection warranty Drawbar galvanized or black, according to manufacturer’s choice Loading ramps hot-dip galvanized Note: Archive images!

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Gbsdpfey Ercbsx Acgel Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! Gsdpfx Ajy Izthscgjbl More details: !

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Gbjdstcwmiepfx Acgsl

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Gbodpfx Aowgghnscgel Višina: 0,70 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Gbodpfxoi Riy Ee Acgel Access ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Godpfx Aei Ri Ryjcgjbl Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Gbedpfxji Ri Dls Acgsl Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Gbodpfx Acoi Ri Ddsgel Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Gbjdpfx Asuytx Secgol Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Chassis Low-bed trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions Gbedpfxewlmr Ro Acgel With 10,000 kg axle load, a special permit is required, only

Stanje: rabljeno, prva registracija: 10/2009, skupna masa: 48.000 kg, lastna masa: 8.940 kg, barva: rumena, vrsta prenosa: drugo, emisijski razred: noben, največja dovoljena obremenitev: 39.060 kg, naslednji pregled (TÜV): 01/2026, vzmetenje: zrak, dolžina tovornega prostora: 13.050 mm, širina tovornega prostora: 2.510 mm, velikost pnevmatike: 235/75 R17.5, velikost sprednje pnevmatike: 235/75 R17.5, velikost zadnje pnevmatike: 235/75 R17.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Nooteboom 3-axle low loader, stepped/gooseneck OSDS-48-03 V * Twin tires * SAF axles * 2 rigid axles, 3rd axle self-steering * Tyres: 235/75 R17.5 Gbedpfey Ehb Hjx Acgsl * Air suspension (lift/lower) * Drum brakes * Wooden floor - steel floor over the wheels * Rail for attaching ramps * 80 km/h type approval * Front markers for oversize load identification * ABS + 2x 7-pin electrical connectors * 2 lashing rings per side (top) * 8 lashing rings per side (bottom) * 8+1 stake pockets per side * Front loading height top: 1.34 m * Rear loading height: 0.88 m * Internal dimensions: total length 13.05 m, upper stepped length 3.00 m, slope 0.80 m, rear 9.25 m, width 2.52 m * Weights: GVW 48,000 kg, unladen weight 8,940 kg, payload 39,060 kg * German vehicle and German documentation!! * First registration: 02.10.2009 * TÜV expired: 01/2026 * Safety inspection valid until 07/2026 * VIN: XMR0SD00090001875 Interim sale, errors and modifications reserved! Company logos have been partially removed from some images – please enquire! Function of extras without guarantee! Your contact person: Christoph Ott Tel. & WhatsApp:

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2018, Oprema: ABS, = Dodatne opcije i oprema = - Vazdušno ogibljenje pozadi - Vazdušno ogibljenje napred = Napomene = Za sva pitanja vezana za vozilo, obratite se gospodinu Seidelu (telefon: ) rado. Gjdpfx Ajy Adc Iocgobl Fliegl DTS 300 niskopodni prikolica BPW osovine, doboš kočnice, federski akumulatori, mehaničke rampe, dozvoljena ukupna masa: 24.000 kg, težina praznog vozila: 6.350 kg, nosivost: 17.650 kg, dimenzije tovarnog prostora: dužina 8.490 mm, širina 2.510 mm, profil guma: 1. osovina 7-12 mm, 2. osovina 7-8 mm, 3. osovina 4-7 mm Na zahtev, nudimo vam ponudu za lizing ili finansiranje. Gospodin Seidel (telefon: ) vam rado stoji na raspolaganju. Više informacija možete pronaći na našoj web stranici. ... Greške, izmene i prethodna prodaja zadržane!!! - = Dodatne informacije = Težina praznog vozila: 6.350 kg Nosivost: 17.650 kg Dozvoljena ukupna masa: 24.000 kg Spoljašnje dimenzije: 0x2550x3500 Za više informacija obratite se Tobiasu Ebertu.

Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Druge možnosti in oprema = - BPW osi - Dvižna os - Bobnaste zavore = Opombe = Fliegl, 2016, BPW osi, 1. os dvižna, bobnaste zavore = Podatki o podjetju = Bančni podatki: Račun pri Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U Gbedsy Avafepfx Acgol - Pred transakcijo vedno preverite naše bančne podatke! - Vozila ni možno rezervirati brez pologa. - Pridržujemo si pravico do napak pri pisanju in besedilu za vsa ponujena vozila.

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding Gedpsi Ri Szofx Acgobl High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Color-coded piping for easy maintenance Spring-loaded par

Stanje: novo, številka stroja/vozila: e7fbe178b85a202cade7e95af, lastna masa: 5 kg, največja dovoljena obremenitev: 22 kg, skupna masa: 29 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis: Semi-Trailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable king pin, two king pin positions. Outer frame slightly sloped with load-lock profile for attaching lashing straps. Note: When using lashing straps in conjunction with side boards, the side boards must be opened to attach the straps! 2 pairs of lashing rings recessed into the outer frame on the gooseneck, each rated at 5 tons 8 pairs of lashing rings recessed into the outer frame in the low bed, each rated at 5 tons 24-ton two-speed landing gear, single-sided operation, with straight lower section, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter shell mudguards in front of and behind the axle assembly 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished lockable door 2 pairs of stake pockets recessed into the outer frame on the gooseneck, internal dimensions 70 x 40 mm 6 pairs of stake pockets recessed into the outer frame in the low bed, internal dimensions 70 x 40 mm !!Internal width between stakes: 2,420 mm!! 3 lashing/stake rails in the low bed, recessed crosswise into the floor across the entire width up to the outer frame (max. usable internal width between external drop-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round bar rails, top and bottom, approx. 60 mm clearance between the round bars (top to bottom). Bottom finished with angle plate, half open to below. For lashing and setting stakes 80 x 80 mm. Quantity: Drop-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized Quantity: Drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Note: Stake pockets / drop-in stakes are not intended as the sole means of load securing for long materials, pipes, etc. without lashing. Rear extension manual with hand crank, extendable approx. 1,500 mm, lockable every 500 mm, with support beam; load capacity at center of gravity: approx. 2,000 kg over entire width at 500 mm, 1,000 kg at 1,000 mm, 500 kg at 1,500 mm; includes extendable rear underrun guard with lighting. 2 pairs of drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Open storage compartment for drop-in stakes at the front wall or below the load area (for 10 drop-in stakes 80 x 50 x 1200 mm and 4 stakes 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Gbsdpfx Asi Ri Hvscgsl Axles/chassis laser aligned, reduces tire wear and fuel consumption Last axle is steering, with automatic reverse lock via reverse light and additional manual lock on the vehicle via a hand button. Air suspension with raise & lower valve Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring-actuated parking brake 2 foolproof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, no connection cable Attention: The trailer may only be towed by vehicles that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, for display in driver’s cab; truck must be properly equipped, no truck installation (not a calibrated scale) Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, without connecting cables 2 additional LED work lights at rear, switched via reverse light 1 LED rotating beacon with bracket, switch

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 Platto, dvigljiva os, SAF osi Godpfx Asyavigscgjbl Int. št. za povpraševanja: 1225958 * ABS * EBS * 3-osi, zračno vzmetenje * dvigljiva os * kolutne zavore * SAF osi Dolžina tovornega prostora: dolžina: 13.600 mm * širina: 2.520 mm Pnevmatike: 1. os: 385/55 R 19,5 30% zračno vzmetenje / dvigljiva os 2. os: 385/55 R 19,5 30% zračno vzmetenje 3. os: 385/55 R 19,5 30% zračno vzmetenje ----Cena: 3.900 EUR + 19% DDV Za dodatna vprašanja smo dosegljivi na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak v besedilu, pomot in vmesne prodaje.