Vega Polpriklopnik Z Nizko Nakladalno Ploščadjo nakup rabljenega (29.295)

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting Kjdpfx Asxtc Uhjicjdn

Stanje: rabljeno, največja dovoljena obremenitev: 44.980 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt of the equipment list. Complete equipment details available upon request. Chassis, cranked * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, robust outer frame * 4-axle configuration. Wheel arch covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodised aluminum * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked area for maximum low-bed length in combination with AluLeg drop supports instead of telescopic landing gears, maximum rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake extension * Self-supporting aluminium roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with spring-assisted tension relief * Additional central stake locks in the roof beam and parking position, operated via pull cord and spring latch * Mechanically height-adjustable roof lift, adjustment height approx. 400 mm, can be operated from either side or single side without needing to open the opposite side and doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with stake height adjustment * Front overlap at bulkhead for driving under tarpaulin up to an overall height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, 450 mm pockets below, above 4 rows of single pockets * In the high bed, only 3 rows of slats. Intermediate distances evenly distributed Floor * approx. 27 mm special water-resistant bonded beech plywood, non-slip surface * Steel plate in wheel arch area * Forklift accessible per DIN ? standard * Outer frame surface flush Brakes * WABCO air brake system with EBS complying with EC Directive 71/320 EEC incl. PREV (park-release safety valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes, low loader specification * Air suspension with raise/lower function, total lift approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electrical and mechanical locking Twin tires Kdsdpfolthguox Aicon * 235/75 R 17.5, -16, incl. spare wheel holder. Without spare wheel Paintwork * Chassis in RAL 3002 red, solid color * Central stakes and axles KTL coated black * Corner posts galvanized finish * Plastic parts black * Galvanized parts unpainted * Rims in factory silver * Bodywork solid color per RAL shade Included special equipment * Air suspension with ECAS control, operated at the trailer * Oversize signage front and rear, galvanized, infinitely extendable, with marker lights incl. plug-in sockets for revolving beacons (small panels) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for flexible locking of central stakes * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize/height version, flat hooks, tarpaulin folds, closures with safety pawl / OCS * Left rear telescopic plug-in socket for revolving beacon incl. beacon * Outer frame for machine transport with approx. 64 securing points in 2,000 kg, 3,000 kg and 10,000 kg versions, according to construction release drawing * 1

Stanje: rabljeno, največja dovoljena obremenitev: 29.580 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, skupna širina: 2.550 mm, skupna višina: 3.020 mm, Oprema: ABS, Kässbohrer nizkopodni polpriklopnik s 3 osmi in 2 rampama Oprema: + 1. os dvižna + 2. in 3. os krmiljena + 2x hidravlični nakladalni rampi, 300 mm Kdjdpfoy H Tfmox Aicjn + 2x podstavki + Raztegljiv do 4 metrov + Odstranljive kolesne vdolbine za stroje do 3,40 m + BPW osi + Zračno vzmetenje + ABS Nudimo tudi podporo pri financiranju/leasingu s partnerji. Vse informacije brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 7.040 kg, skupna masa: 9.900 kg, konfiguracija osi: 2 osi, prva registracija: 02/2016, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.000 mm, skupna širina: 2.070 mm, skupna višina: 1.800 mm, * Druga roka iz komunalne lastnine * Višina zadnje nakladalne površine 90 cm, spredaj 140 cm * Skupna dolžina nakladanja 9600 cm * Mere sedla cca 1,20 m * Škatle za orodje * Nakladalne rampe * Priložena ustrezna sedlasta sklopka Kedpfxev T E Syo Aicsdn Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje. Ogled po dogovoru.

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi * Hidravlične nakladalne rampe, nastavljive po širini * Zračno vzmetenje * Možnost razširitve * Lastna teža: 11.020 kg Kedpowta Alefx Aicedn ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: rabljeno, prva registracija: 01/2016, dolžina tovornega prostora: 13.382 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 3.157 mm, * SAF osi * Hidravlična nakladalna rampa * Hidravlične oporne noge * Vitel * Daljinsko upravljanje * Edscha ponjava Kedpswz Dm Dofx Aicedn -----Interna številka vozila: 11079----Pridržujemo si pravico do napak in vmesne prodaje Na voljo podpora preko WhatsAppa! Za vprašanja o vozilu ali dodatne informacije nam lahko preprosto pišete preko WhatsAppa. WhatsApp: nemščina, angleščina -- WhatsApp: nemščina, angleščina, arabščina

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Kdedpfx Aisx I Uyhocen Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: rabljeno, največja dovoljena obremenitev: 52.100 kg, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2009, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 24.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, Oprema: ABS, Goldhofer Lowbed Trailer with Gooseneck * 5 axles, twin-tire configuration * Extendable lowbed (8m) * 1st axle liftable * Last 4 axles forced steering * Hydraulic support legs * Central lubrication system * BPW axles with drum brakes - Tyres: 235/75 R17.5 Kodpfx Aowta Dpsicodn * Permissible gross weight: 70,000 kg * Unladen weight: 17,900 kg * Loading platform height: 0.85 m * Loading platform width: 2.55 m * Lowbed length: 12.00 m - 20.00 m * Gooseneck length: 4.0 m ---Vehicle number: 11037---Errors and prior sale excepted---Advertising and various lettering have been digitally removed.---We are at your disposal for all formalities related to vehicle purchase. Simply let us know your requests and suggestions; we will take care of the rest. Among other things, we can offer the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Financing brokerage * Assistance with export license plates * Vehicle transfer * Vehicle registration * Recovery and vehicle transport ---Your VTS Team

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 Nizkopodnožno prikolica s ponjavo, krmiljena/dvigljiva os Oprema: zračno vzmetenje * Tehtnica za os * 1. os dvigljiva * 3. os krmiljena Kdjdpswfwd Dofx Aicjn * Hidravlična rampa z dodatno podporo in daljinskim upravljanjem * Prehodna rampa * Električni vitel z daljinskim upravljanjem * Edscha streha * Stranski zaboji za shranjevanje * Rezervno kolo s standardno pnevmatiko * Dodatni žarometi * Izvlečne table za izredne širine Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do napak in predhodne prodaje. Interna številka vozila: 8303

Stanje: rabljeno, največja dovoljena obremenitev: 52.100 kg, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, naslednji pregled (TÜV): 12/2025, dolžina tovornega prostora: 15.800 mm, skupna širina: 2.550 mm, Oprema: ABS, Goldhofer polpriklopnik z labodjim vratom in nizko posteljo - 5 osi - 1. os dvižna - Zadnje 4 osi prisilno vodene - Centralno mazanje - BPW osi - Pnevmatike: 235/75 E17,5 - Bobnaste zavore Kdjdpfx Aow S S Uveicsn - Dovoljena skupna masa: 70.000 kg - Lastna masa: 17.900 kg - Tehnični pregled SP zapade: Tehnični pregled do: 12/2025 - Nakladalna višina: 0,85 m - Nakladalna širina: 2,55 m - Dolžina nizkega ležišča: 12,0 m - Dolžina labodjega vratu: 4,0 m - Izvlečljiv do skupne dolžine 24,4 m Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 11177 WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nas lahko kontaktirate prek WhatsAppa.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, Besuchen Sie unsere Webseite, auf der Sie unseren kompletten Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 8515 Möslein STO 3 Liftachse / Lenkachse Österreichische Zulassung Erstzulassung: 21.05.2024 Technisch zulässiges Gesamtgewicht (kg): 42.000 Zulässiges Gesamtgewicht (kg): 39.000 Leergewicht (kg): 8.220 Fahrgestellnummer (FIN): W09MTS0480SM396 BEREIFUNG UND ACHSEN: Bereifung: 245/70 R 17,5 Achskonfiguration: 3 Achsen BPW 3. Achse: Lenkachse 1. Achse: Liftachse Ksdpfx Aoy Hzt Ssicjdn Luftfederung Scheibenbremsen FAHRZEUGUNTERLAGEN: Dokumentation aus Österreich M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA (Ukrainisch, Russisch) Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Trotz aller Bemühungen um korrekte Angaben übernehmen wir keine Haftung für Fehler oder Auslassungen. Wir bitten unsere Kunden, die verfügbaren Fotos zu prüfen. Die angegebenen Maße sind Circa-Werte. Unsere Fahrzeuge werden im aktuellen Zustand verkauft. Wir laden Sie ein, unser Unternehmen zu besuchen und das Fahrzeug persönlich zu besichtigen. Eine Probefahrt ist ebenfalls möglich. Bitte beachten Sie, dass die mit dem Fahrzeug gelieferten Batterien den aktuell verbauten entsprechen. Für Informationen zu neuen Batterien stehen wir Ihnen gerne zur Verfügung.

Stanje: rabljeno, največja dovoljena obremenitev: 37.550 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2009, uflieger with air suspension and hydraulic dual-circuit forced steering (turntable) Dimension B 11,900 – 19,600 mm Kdjdpsy Sd Enjfx Aicen Unladen weight 10,450 kg Loading area - "Platform" design, single-stage telescopic - Mechanical landing legs - Front corners 90°, closed outer frame - Articulation integrated into the front of the frame - Ball bearing turntable-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge - Rear crossmember as robust underrun protection Chassis - 3-axle chassis with air suspension incl. lifting and lowering valve - BPW axles Braking system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (ASA) - Parking brake via spring-loaded cylinders - ABV (ABS) Loading area LxW 13,500 x 2,480 mm extendable by +7,700 mm to 21,200 mm deck height loaded 1,380 mm at coupling height loaded 1,200 mm steering radius to the rear 2,350 mm kingpin load 18,000 kg

Stanje: rabljeno, največja dovoljena obremenitev: 63.900 kg, skupna masa: 96.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1996, Vehicle Description: Eurocompact (2+4) Excavator Bed with Pendulum Axles Fifth Wheel Height (loaded): 1,300 mm Tyres: Completely new Trailer is in excellent technical and visual condition Weights & Speed: 80 km/h Fifth Wheel Load: 24,000 kg Axle Load: 6 x 12,000 kg Permissible Gross Weight: 96,000 kg Unladen Weight: approx. 32,100 kg Payload: approx. 63,900 kg Gooseneck Length x Width: 2,700 mm x 2,480 mm Fifth Wheel Height (loaded): 1,300 mm Rear Steering Radius: 2,450 mm Kingpin: 3.5'' Fifth Wheel Load: 24,000 kg 2-Axle Front Bogie, Prism Trough Kedpey Sd Eusfx Aicedn Wheelbase: 1,500 mm Single tyres, SAF pendulum axles Steering: Opposition steered axle arrangement Length: 3,000 mm x 2,740 mm Tyres: 285/70 R 17.5 Excavator Bed, Single-Telescopic Length x Width: 5,800 mm x 1,350 mm with folding outriggers and mats Base width: 2,740 mm, extendable to 3,240 mm Telescopic extension: 4,000 mm, total up to 9,800 mm in the low bed Excavator bed platform height: 440 mm Loading height (loaded): approx. 540 mm at 100 mm ground clearance Loading height with rotated outriggers: 450 mm at 100 mm ground clearance 4-Axle Rear Bogie, Prism Trough Wheelbase: 3 x 1,500 mm Single tyres, SAF pendulum axles Steering: Forced-steered axle arrangement Length: 6,500 mm x 2,740 mm Tyres: 285/70 R 17.5 Radio Remote Control

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles Kdedpfxey Ngzys Aicjn * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: Kdodpfx Aol Tnvgjicen * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left Kedpfoy Ngz Hex Aicsdn ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector Kjdowh Hdxopfx Aicjdn * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid Kjdpeykx Nqjfx Aicodn * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders Ksdpfeykx I Tjx Aicjdn * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: rabljeno, največja dovoljena obremenitev: 38.048 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizke izvedbe s hidravličnimi rampami Prva registracija BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Kedey Eupwjpfx Aicodn Pnevmatike: 245/70 R17,5 40/45% Skupna masa: 48.000 kg, Lastna masa: 9.952 kg, Nosilnost: 38.048 kg. Dolžina labodjega vratu: 3,95 m Dolžina nizke ploščadi: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje podporne noge Privezni obroči Žepi za kole Pridržujemo si pravico do napak/opisnih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 43.860 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 18.640 mm, širina tovornega prostora: 3.250 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.750 mm, skupna višina: 355 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB4E polpriklopnik z nizko postavljeno platformo Prva registracija leta 2020 BPW Eco Plus osi 1x dvižna os Zadnji 2 osi vodljivi Bobnaste zavore ABS/EBS Pnevmatike: 245/70 R17,5 34/40% Zračno vzmetenje Kdsdpsx Ianqjfx Aicjn Skupna masa: 58.000 kg, lastna teža: 14.140 kg, nosilnost: 43.860 kg Dolžina labodjega vratu: 3,40 m Nizka dolžina platforme: 9,24 m + 6,00 m izvlečno Skupna dolžina tovora: 18,60 m Širina: 2,75 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe 2 zadnja podstavka Privezne točke 24V napajalni paket za hidravliko ramp Možne napake, pisne napake in vmesna prodaja.

Stanje: rabljeno, največja dovoljena obremenitev: 54.020 kg, skupna masa: 69.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 16.530 mm, širina tovornega prostora: 3.250 mm, skupna širina: 2.750 mm, skupna višina: 3.300 mm, Leto izdelave: 2015, Oprema: ABS, Nooteboom OSD-73-04V Polpriklopnik - Nizkopodni priklopnik Prva registracija: 23-03-2015 SAF osi 2 krmiljeni zadnji osi 1 dvižna os Bobnaste zavore z ABS in EBS Pnevmatike: 245/70 R17,5 približno 40 % Zračno vzmetenje Skupna masa: 69.000 kg, lastna teža: 14.980 kg, nosilnost: 54.020 kg Dolžina nizke platforme: 9,25 m + 3,00 m, dolžina labodjega vratu: 4,30 m, skupna dolžina nakladanja: 16,55 m Širina: 2,75 m + 2x25 cm = 3,25 m Višina nakladalne površine: približno 90 cm Žepi za količke Privezišča 2 zadnja podstavka Kdjdpfsx Epdvsx Aicjn Hidravlične rampe s stranskim pomikom Pridržujemo si pravico do napak / tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 38.080 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 19.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 810 mm, skupna širina: 255 mm, skupna višina: 2.150 mm, Oprema: ABS, Kel-Berg E50S4 Polpriklopnik z nizkim ležiščem Prva registracija: 23-01-2020 SAF osi 2x sledilni krmiljeni osi Bobnaste zavore z ABS in EBS Pnevmatike: 205/65 R17,5 35/40% Zračno vzmetenje Skupna masa: 50.000 kg, Lastna masa: 11.920 kg, Nosilnost: 38.080 kg Dolžina labodjega vratu: 4,30 m, Dolžina nizkega ležišča: 8,85 m + 6,30 m teleskopsko Skupna dolžina nizkega ležišča: 15,15 m Širina: 2,55 m Višina nakladalne površine: 81 cm 2 zadnja podporna stebra Privezne zanke Vložne stranice Pridržujemo si pravico do napak/pisalnih napak in vmesne prodaje. Kjdpfx Ajxmpadsicsdn

Stanje: rabljeno, največja dovoljena obremenitev: 27.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2005, dolžina tovornega prostora: 9.100 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.600 mm, Oprema: ABS, Langendorf SATUE 30/34 polpriklopnik nizkopodni nosilec Prva registracija: 18-01-2005 3x SAF osi Prva os je dvižna os Tretja os je vodena sledilna os Zračno vzmetenje z ABS Pnevmatike: 235/70 R17,5 cca 35%/40% Kdjdpfx Aoxx Emkoicjn Skupna masa: 35.000 kg, Lastna masa: 7.100 kg, Nosilnost: 27.900 kg Dolžina nizkega poda: 910 cm Širina: 255 cm Višina nakladalne površine: 89 cm Nizkopodni nosilec je posebej izdelan za nalaganje stroja z roko naprej Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 31.250 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, dolžina tovornega prostora: 19.480 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 780 mm, skupna širina: 2.550 mm, skupna višina: 2.300 mm, Leto izdelave: 2016, Oprema: ABS, Broshuis E-2190/24 Polnizki priklopnik Prva registracija Gigant osi 1 dvižna os Bobnaste zavore z ABS in EBS Pnevmatike: 205/65 R17,5 35/40% Zračno vzmetenje Skupna masa: 42.000 kg, Lastna masa: 10.750 kg, Nosilnost: 31.250 kg Kdjdpfx Aiey A Apmscjn Dolžina labodjega vratu: 4,15 m, Dolžina tovornega prostora: 8,93 + 6,40 m, Širina: 2,55 m + 2x25 cm, Višina nakladalne površine: 78 cm Skupna nakladalna dolžina: 19,48 m Zadnje podporne noge Žepi za stebričke 4x kontejnerske zapore (twistlocks) Prstani za privezovanje Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.