Müller-Mitteltal Ka-Ta-R 14,4 Breitreifen, Rampen nakup rabljenega (56.241)

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) Prjdpfxel Tlhro Ab Djb * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 tonne Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (activated via reverse gear) Prsdol Tnu Ajpfx Ab Deb ----General Attachments: * Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning boards, front and rear * Front axle plastic mudguards with spray protection * Rear axle straight galvanized steel side skirts with spray protection * Reflective contour tape on the sides and rear * Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running areas of the low-bed platform ----Load Securing (La-Si package consists of): * 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier * 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity * 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier * 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame * 3 stake pockets per side, each offering 2 t lashing capability simultaneously ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope) * Beam bracket for widenings under the chassis on the left, longitudinally mounted ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Ramps: * Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the ramps made from hardwood * Steel construction prepared for 6-way control valve ----Loading Height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Coating/Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized * --Axles, air tanks, drawbar painted black-- ----Infos: * Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 2.201 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 3.020 mm, širina tovornega prostora: 1.600 mm, višina nakladalnega prostora: 280 mm, prostornina tovornega prostora: 2 m³, skupna širina: 2.150 mm, skupna višina: 657 mm, Varjena konstrukcija stranic/okvirja iz jeklene pločevine, vroče cinkana, masivni pohodni jekleni blatniki, nakladalne rampe (DxŠ) 1530x360 mm, bočno pomične, nosilnost posamezne rampe 1500 kg, z nedrsečo mrežno prevleko in integriranimi podpornimi nogami, pod iz večslojnega vezanega lesa, po 6 pritrditvenih ušes na vsaki strani, AL-KO os(i), oporna kolesa spredaj, vzmetena zavora, ročna zavora, 13-polna priključna vtičnica za prikolico, vozilo je lahko opremljeno z oglaševanjem in/ali napisi. Podpfxozihp Ne Ab Dorb SI87022 Naša ponudba je načeloma brez novega TÜV pregleda. Če želite nov TÜV pregled, vam z veseljem posredujemo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z oglaševanjem in/ali napisi. Veljajo naši splošni pogoji dobave in plačila. Z veseljem vam pripravimo tudi ponudbo za financiranje ali leasing tega objekta. Prosimo, kontaktirajte nas!

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 03/2004, Leto izdelave: 2004, Oprema: ABS, = Additional options and equipment = - Electronic Braking System (EBS) = Notes = Müller-Mitteltal RAK German vehicle Roll-off trailer 2-axle Air suspension ABS Tyres 60% ID no. 709 Predpfx Asxyx Haeb Dsb We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please make an appointment. If you are unable to visit our showroom, we offer complete processing by phone, email, WhatsApp, or fax. On request, we deliver your new vehicle directly to your door. This means you get the best price as well as maximum safety and convenience with your purchase. We are happy to take your used vehicle as a trade-in. We offer you the option of a digital vehicle appraisal based on your vehicle photos, even without visiting the dealership. Our specialised purchasing team offers you a guaranteed top price. Upon request, we deliver your new ‘used’ vehicle nationwide directly to your doorstep and take your trade-in back with us. Financing – leasing Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times. The information given in advertisements, on the internet, on price labels, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately by the buyer. Offer is generally without new TÜV approval; we will gladly provide you with an offer from our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 4,850 kg Payload: 13,150 kg Gross vehicle weight: 18,000 kg

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower function ----Drawbar / Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (actuated via reverse gear) * 1 removable LED beacon incl. bracket at the rear * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External fold-down supports at the rear Predpfev D Tbdsx Ab Djb * Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side * At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front wall and end cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment under the loading area, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized--- * Axles, air tank, front landing leg, and flange towing eye painted in black ----Other information: * Brand-new vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 39/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.880 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 02/2015, Leto izdelave: 2015, Schwarzmüller, prikolica s 4 osmi, pocinkana, nizkotilna z hidravličnimi rampami, razširjiva na 3 m, s žlico za izkop. Prsdpjz D Rl Hofx Ab Djb Stanje: glede na starost, dobro. Pnevmatike: 60–80 %. ----Tehnične specifikacije: Splošno: ? Kratka opis: Nizkotilna prikolica s 4 osmi in hidravličnimi rampami, razširjiva, pocinkana. Kabina: ? Hladilnik: Ne. Motor: ? AdBlue: Da. Prestavna škatba: ? Zaviranje z retarderjem: Ne. Podvozje: ? Litje platišč: Ne. ? Dvigalna os: Ne. ? Vodena os: Ne. Sedelna sklopka: ? Sedelna sklopka za invalide: Ne. Dokumenti: ? Prazna teža: 8.120 kg.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 08/2011, Leto izdelave: 2011, Oprema: ABS, Schwarzmüller, nadvoz s stranskimi stenami, predel za palete, dvigajoča os Vse na prvi pogled: * Datum prve registracije: 25.08.2011 * Letnik: 2011 * Barva: Modra * Lastna teža: 6.780 kg * Pnevmatike: 385/65 R 22,5 * Opomba: Na voljo takoj Posebna oprema: * 60 cm visoke stranske stene * Dvigajoča os * Predel za palete (zaprt) * Osmerne osi MB * 23 parov pritrdilnih točk * Orodjarna omara * 26 kosov aluminijastih letven * Opora za palete (desna stran) * 2x7 + 1x15-polni električni priključek * Podpore Jost * Škatla za dokumente * Žica za carinske namene * Nosilec za gasilni aparat z gasilnim aparatom * Nosilec za rezervno kolo z rezervnim kolesom * ADR plošča * 2 kos LED luči za vzvratno vožnjo Serijska oprema: * Triosna prikolica * Kolutne zavore * 2 kosa klini * ABS * EBS * Ventil za dvig in spuščanje * Ojačana sprednja stena * Stopnice na zadnji strani Pridržana pravica do sprememb, tiskarskih napak in vmesne prodaje. Prodajalec si pridržuje pravico, da odstopi od prodaje. Avtorske pravice: Vse besedilo, slike in videoposnetki v tej oglasni objavi so avtorska last STARENT Truck & Trailer GmbH. Uporaba, razmnoževanje ali nadaljnja distribucija – tudi delno – ni dovoljena brez izrecnega pisnega soglasja. _____ Interna številka za povpraševanja: TR26276 _____ STARENT Truck & Trailer GmbH, Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: Ing. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: WhatsApp t: @: Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, boščina, srbščina) p: / WhatsApp t: -104 @: Elias Höfler (nemščina, angleščina, bolgarščina, boščina, srbščina) p: / WhatsApp t: -123 @: Govorimo 13 jezikov. Zagotovo tudi vašega. Kontaktirajte nas! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlačilci, prikolice, tovornjaki in kombiji. Kontaktne osebe za odkup: Michael Doblhofer (nemščina, angleščina) Predpfx Aez Hhtgob Djb p: WhatsApp t: -102 @:

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalisation unit ----Drawbar / Drawbar Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre monitoring system ----General Attachments: * Jost landing leg at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel, foldable with drop side spring lifters Pjdpfx Abol Th Hle Djrb * Steel rear wall can be slid in between the ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In front and rear corners, each 1 x 10 t lashing ring; various holes in front wall and rear crossmember for 1.2 t lashing option * Profifix lashing rail centrally positioned along the longitudinal axis, with lashing capacity up to LC 3000 daN ----Ramps: * One-piece mech. grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach slope approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanised * Sideboard painted in RAL 9010 pure white * Painting of the side panels in any RAL colour available at extra cost * Axles, springs, air tank, flange eye and landing leg painted in black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available immediately ex-works at Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 14.760 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, Leto izdelave: 2018, Oprema: ABS, Muller-Mitteltal RS T-18.0, prikolica z dvema osjema in drsnim sistemom za kontejnerje, prvič registrirana, opremljena z diskovimi zavorami, ABS in EBS, serijska številka: WMM00000J0062895, gume: 265/70 R19,5, 8 kosov, 60-odstotna obraba, zračna vzmetitev, skupna teža: 18.000 kg, neto teža: 3.240 kg, nosilnost: 14.760 kg, dolžina šasije: 7,00 m, primerna za kontejnerje dolžine 5 do 7 m, pocinkana šasija, medosna razdalja 5,20 m. Pridržana pravica do sprememb/napak in vmesne prodaje. Prsdpfx Abez Ew Hao Dsb

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18,0: * 2 v 1 = za kontejnerje in kot nizkotilni priklopnik ----Zavore: * EBS, elektronski zavorni sistem * Naprava za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 2 x 10 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje z dvigom in spuščanjem ter ventilom RTR ----Priklopna naprava: * Priklopna naprava, dolžina 2.000 mm, z 40 mm priklopnim čepom in nastavitvijo višine ----Elektrika / Osvetlitev: * Nadzor tlaka v pnevmatikah s prikazom v vozilu prek signala EBS - brez dodatne namestitve v vozilu * LED zadnje luči 12 / 24 V * 15-polni vtič ----Splošni dodatni deli: * Orodjarna omara iz prašno lakiranega jekla, približno 1.000 x 300 x 600 mm * Predal za mrežo za kontejnerje, iz pocinkane pločevine, 960 x 300 x 450/400 mm * Reflektirajoči trakovi ob straneh in zadaj * Stranski zaščitni element * Plastični blatniki z zaščito proti brizganju * Plastični zaščitni odbijač zadaj * Zložljiv A-znak zadaj ----Nosilna površina: * Glavni okvir z dvignjenimi stranskimi okvirji za vodenje kontejnerjev * Jeklena pločevina na dnu z vdolbinami za valjčke na področju podvozja * Možna dolžina kontejnerja od 5.500 do 7.000 mm * Pnevmatska 4-točkovna zapora in mehanska vtična opora spredaj v tirnici, certifikat za pritrditev tovorja po standardu DIN 30722 - 1 * Varjeni šivi kot protizdrsna prevleka na področju tirnice za nagibno ploščo * Mehanske opore zadaj ----Pritrditev tovora: * 1 par 10 t, UVV pritrdilnih pasov spredaj na nosilcu čelne stene * 3 pari 10 t, UVV pritrdilnih pasov ob straneh v stranskem okvirju * Ob straneh po 4 x 2 t, pritrdilne zanke v obliki deteljice * 4 x 8 t, pritrdilni nosilci vstranjeni v stranski okvir ----Nagibne plošče: * 1 par aluminijastih nagibnih plošč (10,6 t / par), 2.800 x 470 mm, primerne za vozila s pnevmatikami in gosenicami (zaključljiv predal zadaj) Prsdpfx Abel Tpc Ao Dob ----Barvanje: * Podvozje, podvozje, deli zapiralnega mehanizma, zadnje opore, vročepocinkani * Priklopna naprava, osi, zračni rezervoar, pa v črni barvi ----Informacije: * Novo vozilo brez prve registracije z vso garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Ilustrativne slike ----Dobavni rok: * Dostava je možna približno od 43. tedna leta 2026.

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18,0: * 2 v 1 = za kontejnerje in kot nizkonivojski transporter ----Zavore: * EBS – elektronski zavorni sistem * Naprava za izpust zavor pri vzmetnem akumulatorju * Bobnaste zavore ----Osi: * 2 x 10 t Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalno in spuščalno napravo ter RTR ventilom ----Povezava vlečnega stroja: * Povezava vlečnega stroja dolžine 2.000 mm s 40 mm vlačilno glavo in nastavitvijo višine ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku preko signala EBS – brez dodatne namestitve v tovornjaku * LED zadnje luči 12 / 24 V * 15-polni vtič ----Splošni dodatni deli: * Orodjarna škatla iz prašno lakiranega jekla, približno 1.000 x 300 x 600 mm * Škatla za shranjevanje mreže za kontejnerje iz pocinkane pločevine, 960 x 300 x 450/400 mm * Odsevni trak ob straneh in zadaj * Stranski zaščitni element pred trčenjem * Plastični prednji blatnik z zaščito proti brizganju * Plastični zadnji odbijač * Zložljiva oznaka v obliki črke A na zadnji strani ----Nosilna plošča: * Glavni okvir z dvignjenim zunanjim okvirjem za vodilo kontejnerjev * Jeklena pločevina talne površine z vdolbinami za valje na območju podvozja * Možna dolžina kontejnerja od 5.500 do 7.000 mm * Pnevmatsko zaklepanje z 4 kljuke ter mehanska vstavljiva opora spredaj na tirnici, potrdilo o varovanju tovora v skladu s standardom DIN 30722 - 1 * Varjena plast za preprečevanje zdrsavanja na območju tirnice rampe * Mehanske opore na zadnji strani ----Varovanje tovora: * 1 par 10 t UVV pritrdilnih pasov spredaj na nosilcu čelne stene * 3 pari 10 t UVV pritrdilnih pasov ob straneh v zunanjem okvirju Pjdpfx Abol Tq Nmj Djrb * Ob straneh po 4 x 2 t pritrdilne zanke v obliki detelje * 4 x 8 t pritrdilni nosilci, vgrajeni v zunanji okvir ----Rampe: * 1 par aluminijastih nakladalnih ramp (10,6 t / par) 2.800 x 470 mm, primerne za vozila s gumijastimi ali goseničnimi pogoni (zaklenljiv prostor za shranjevanje na zadnji strani) ----Barvanje: * Podvozje, podvozje, deli za zaklepanje in zadnje opore so vroče pocinkani * Vlačna povezava, osi in rezervoar za zrak pa so pobarvani v črni barvi ----Informacije: * Novo vozilo brez prve registracije z vso garancijo proizvajalca * Napake in vmesna prodaja pridržane * Ilustrativne slike ----Dobavni rok: * Dostava predvidoma od 43. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: Prsdpfx Ajyl E Dqeb Deb 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized

Stanje: rabljeno, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18,0: * 2 v 1 = za kontenerje in kot nizkotilni prikolici ----Zavore: * EBS – elektronski zavorni sistem * Naprava za hitro sprostitev zavor pri vzmetnih cilindrih * Bobnaste zavore ----Osi: Pjdpfszihcpjx Ab Dorb * 2 x 10 t Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter RTR ventilom ----Povezovalna priprava: * Ukrivljena povezovalna priprava, dolžina 2.000 mm, z vrtljivo povezovalno glavo 40 / 50 mm (brez 8° oja) * GHD naprava za nastavljanje višine namesto vzmetne povezovalne droge ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek EBS signala – brez dodatne namestitve na tovornjaku * LED zadnje luči 12 / 24 V * 15-polni vtič ----Splošni dodatni deli: * Orodjarna omara iz jeklene pločevine s prašnim premazom, približno 1.000 x 300 x 600 mm * Nosilec za rezervno kolo na desni strani * Reflektivni obrobni trak na strani in zadnji strani * Stranski zaščitni element * Plastični zadnji odbijač s ščitnikom proti brizganju * Plastični zaščitni odbijač zadaj * Zložljiv znak "A" zadaj ----Tovor: * Glavno podvozje z dvignjenim zunanjim okvirjem za vodenje kontenerjev * Jeklena pločevinasta podlaga z vdolbinami za valje v območju voznega podvozja * Možna dolžina od 5.500 do 7.000 mm * Pnevmatsko zaklepanje z 4 jezički ter mehansko vstavljivi oporni koti spredaj v tiru, potrdilo o varovanju tovora v skladu s standardom DIN 30722 - 1 * Varilna črta kot protidrsna površina v območju tirnice rampe * Mehanska oporna opora zadaj ----Varovanje tovora: * 1 par 10 t UVV pritrdilnih pasov spredaj na nosilcu čelne stene * 3 pari 10 t UVV pritrdilnih pasov stransko v zunanjem okvirju * Na vsaki strani 4 x 2 t pritrdilne zanke v obliki deteljice * 4 x 8 t pritrdilne zanke, vgrajene v zunanji okvir ----Rampe: * 1 par aluminijastih naloževalnih ramp (10,6 t / par), 2.800 x 470 mm, primerne za vozila s pnevmatikami in gosenicami (zaklenljiv prostor za shranjevanje od zadaj) ----Barvanje: * Podvozje, vozno podvozje, deli za zaklepanje, zadnja oporna opora, vroče pocinkani * Povezovalna priprava, osi in kompresorji pa pobarvani v črni barvi ----Informacije: * Vozilo ima do 03.2027 polno proizvajalčevo garancijo * Pridržujemo si pravico do sprememb in napak * Prikolica je v odličnem stanju in je bila uporabljena največ 5-krat ----Dobavni rok: * Na voljo takoj, dobava iz Egestorfa ob avtocesti A7

Stanje: rabljeno, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18,0: * 2 v 1 = za kontejnerje in kot nizkotilna prikolica ----Zavore: * EBS elektronski zavorni sistem * Sistem za nujno sprostitev zračnih cilindrov * Bobnaste zavore ----Osi: * 2 x 10 t Gigant osi ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ter ventilom RTR ----Povezovalna priprava: * Ukrivljena povezovalna priprava dolžine 2.000 mm s vrtljivo povezovalno glavo 40 / 50 mm (brez 8° ušesca) Podpfszihciex Ab Dsrb * Naprava za nastavitev višine GHD namesto vzmetne vlečne palice ----Elektrika / Osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS – brez vgradnje na strani vozila * LED zadnje luči 12 / 24 V * 15-polni vtič ----Splošni dodatni deli: * Orodjarna škatla iz jeklene pločevine s praškovnim premazom, približno 1.000 x 300 x 600 mm * Nosilec za kolo na desni strani * Reflektirajoč konturni trak stransko in zadaj * Stranski zaščitni element * Plastični četrt blatnika s ščitnikom proti brizganju * Plastični zaščitni odbijač zadaj * Zložljiv opozorilni znak zadaj ----Nosilna plošča: * Glavni okvir z dvignjenim zunanjim okvirjem za vodenje kontejnerjev * Jeklena pločevinasta podlaga z vdolbinami za valje na območju podvozišča * Možna dolžina 5.500 - 7.000 mm * Pnevmatska 4-delna zapora z objemkami ter mehanska vstavna opora spredaj na tirnici, potrdilo o pritrditvi tovora v skladu s standardom DIN 30722 - 1 * Varilni šiv kot protizdrsna površina na območju tirnice nakladalne rampe * Mehanske opore zadaj ----Pritrditev tovora: * 1 par 10 t. UVV pritrdilnih zank spredaj na nosilcu čelne stene * 3 pari 10 t. UVV pritrdilnih zank stransko na zunanjem okvirju * Na vsaki strani 4 x 2 t. pritrdilnih zank v obliki deteljice * 4 x 8 t. pritrdilnih zank, vgrajenih v zunanji okvir ----Rampe: * 1 par aluminijastih naloževalnih ramp (10,6 t / par) 2.800 x 470 mm, primernih za vozila s pnevmatikami in gosenicami (zaklenljiv prostor za shranjevanje od zadaj) ----Lakiranje: * Podvozje, podvozišče, deli za zaklepanje, zadnje opore – vroče pocinkano * Povezovalna priprava, osi, zračni rezervoar – pobarvani v črni barvi ----Informacije: * Vozilo ima do 03.2027 polno garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Prikolica je v stanju, kot nova, in je bila uporabljena največ 5-krat ----Dobavni rok: * Takojšen dobavni rok iz Egestorfa ob avtocesti A7.

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi Prodpfx Abew Tgkbj Djb * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side Prjdov D Tbkjpfx Ab Djb * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 39/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.500 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 5.550 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 8 m³, skupna širina: 2.550 mm, skupna višina: 2.300 mm, Oprema: ABS, 3-strani nagibna nadgradnja / popolnoma pocinkana, nihajne in zložljive stranske stene s podporo vzmetenja, 6 parov pritrdilnih ušes v tleh, nastavljiva vlečna gred, podpora za dviganje, 2x preklopne podporne noge zadaj, shranjevalni prostor za aluminijaste rampe, alu rampe pribl. 3200x400 mm, višina nakladanja: pribl. 1080 mm, ABS, EBS, RSS (sistem za stabilnost pri prevračanju), SAF osovine, bobnaste zavore, zračno vzmetenje z možnostjo dviga in spusta, vozilo lahko vsebuje reklamne nalepke ali napise. Psdpfx Aszbpa Ujb Dorb SI86963 Naša ponudba je načeloma brez nove tehnične preizkušnje (TÜV). Če želite novo TÜV preizkušnjo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo lahko vsebuje reklamne nalepke ali napise. Uporabljajo se naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo za financiranje ali najem. Prosimo, kontaktirajte nas!

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: Psdpfx Aboy Tr Hco Djrb * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines ----General attachments: * Support winch in front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines Psdpfx Ajy Tr Hiob Derb ----General attachments: * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via positioning cylinder * Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Eye: * 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lamps activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Power supply for radio control 12+24V via tail light ----General Attachments: * BPW landing gear at the front * Mechanical, extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted * Closed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tractive force * Hook height 1,570 mm * Hooklift operated via radio remote control * Radio remote control with fast function during tipping, but not during winching * Emergency stop switches on both left and right sides * Container bed with 4 side supports each and one roll at the rear * Hydraulic rear internal locking Prodex Dp Agspfx Ab Djb * 2 additional hydraulic cylinders to assist with raising the main arm * 2 x mechanical folding rear supports * Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load * Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted while tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow ----Information: * Subject to errors and prior sale * Vehicle in very good / like-new condition ----Delivery Time: * Vehicle immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release system for spring-loaded cylinders * Drum brakes * Duomatic brake connection Pjdpsx Dp Atsfx Ab Dorb ----Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables for agricultural and forestry vehicles * Power supply for radio remote: 12+24 V via taillight ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium wheels * Split-pin towing coupling (use only with retracted underrun protection) * Enclosed plastic half-shell single mudguards * Two-step access before the front bulkhead on the left side * Shovel and broom holders in front of the front bulkhead * 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side * Enclosed side protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of hooklift via radio remote control * Remote control with rapid function when lowering, not when raising * Emergency stop switches left and right sides * Container supports with 4 lateral supports per side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as-new condition ----Delivery time: * Vehicle is immediately available

Stanje: rabljeno, prevoženi kilometri: 410.849 km, moč: 338 kW (459,55 KM), prva registracija: 03/2023, vrsta goriva: dizel, lastna masa: 8.205 kg, največja dovoljena obremenitev: 10.795 kg, skupna masa: 19.000 kg, konfiguracija osi: 4x2, medosna razdalja: 3.750 mm, barva: rdeča, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, hidravlika, klimatska naprava, navigacijski sistem, parkirni grelec, tempomat, Barva: rdeča, lastna teža: 8205 kg, največja dovoljena masa: 19000 kg, 1. os: 385/65 R22.5, 2. os: 315/70 R22.5, sedeži: velur, vzmetenje: kombinacija listnih vzmeti in zračnega vzmetenja, zaviralnik, digitalni tahograf, priklopna prikolica: FISCHER SK-S36.20 2/150, -660 mm, EBS – elektronski zavorni sistem, ESP – elektronski program stabilnosti, avtomatska klimatska naprava, dodatna klimatska naprava za parkiranje, prilagodljiv tempomat ACC, grelec za parkiranje z avtomatskim predizborom, ogrevanje sedežev, LED žarometi, sistem za čiščenje žarometov, avtomatske luči, nastavitev višine žarometov, radio, pretakanje zvoka preko Bluetootha, priprava za GSM s povezavo Bluetooth, senzor za dež, večfunkcijski usnjen volan, mehansko nastavljiv volanski stolpec, ledvena opora, alarmni sistem proti kraji, električna stekla (2x), strešno okno, strešni spojler, meglenke, električno nastavljena in ogrevana zunanja ogledala, električno nastavljeno ogledalo za pločnik, širokokotno ogledalo, blokada koles, centralno zaklepanje z daljinskim upravljanjem, vetrobransko steklo, hladilnik, indikator obremenitve osi, sistem za zadrževanje vozila na klancu HHC, LED-dnevne luči, vtičnica 1x15 pin, funkcija za plovbo, telematski sistem, stranske obrobe, zgornja in spodnja postelja, vzmetenje kabine, pametni tahograf 2, priklop Rema, Vecto 3. Prsdpez Elkgsfx Ab Dsb

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side Pedpew Ndr Uofx Ab Dorb ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 42/2026

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2014, GOVORIM RUSKO – Jurij, mobil: Prodpezkpvgefx Ab Dob 3-osni prikolica z nizko nosilnostjo, dostopna od zadnje strani. Dovoljena skupna masa 30.000 kg, nosilnost 23.650 kg. Nosilna površina 8.400 mm (6.500 + 1.900) x 2.550 mm, zložljiva razširitev na 3.000 mm, opozorilni paket za preseženo širino, nosilec za roko bagra. 20 pritrdilnih točk in 8 žepov za pritrdilne palice, ki omogočajo istočasno pritrditev, 2 orodjarni omari. Hidravlične rampe, približno 3.000 x 720 mm, z gumijasto oblogo. Osnovne osi Gigant, sistem EBS, vzmetenje s paraboličnimi vzmetmi, pnevmatike 235-75 R 17.5. Priklopna vilica je upognjena, priklopna zatič 50 mm. 2-žični zračni sistem (Duomatik), 2-žični hidravlični sistem, 24 voltov. Višina nakladalne površine prazne prikolice, približno 910 mm. Barva: zelena. Tehnični pregled veljaven do 06-2027. = Dodatne informacije = Dimenzija pnevmatik: 235-75R17.5 Vzmetenje: parabolično vzmetenje Lastna teža: 6.350 kg Nosilnost: 23.650 kg Dovoljena skupna masa: 30.000 kg Država proizvodnje: DE Za dodatne informacije se obrnite na Jana-Marca Schwickerta.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 694 kg, največja dovoljena obremenitev: 2.307 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.700 mm, velikost pnevmatike: 185R14C, Leto izdelave: 2025, For sale is a TA-NO T4A special trailer designed for transporting cable drums, with a permissible gross weight of 3,000 kg and equipped with an electric cable winch. Suitable for use in the most demanding conditions, offering a payload capacity of 2,306 kg. The trailer is available for immediate delivery! Features: - AL-KO braked axles 1,500/1,500 kg - AL-KO overrun brake for 3,000 kg - Robust, welded construction with V-drawbar - All frame components hot-dip galvanized for excellent corrosion resistance - Maximum drum diameter: 2,600 mm - Maximum drum width: 1,700 mm - Mounted cable drum shaft diameter: 84 mm (optional 71 mm drum shaft available for an additional €399 net) - Overall length: 4,692 mm - Overall width: 2,539 mm - Internal length: 2,600 mm - Internal width: 1,700 mm - Unladen weight approx. 694 kg Podpfx Aoxn Amysb Dsrb - Wheel size: 185 R14C - Metal covers for rear lights - Support legs for stabilizing the trailer while loading - Heavy-duty electric winch with remote control - No rear light bar, reducing drum loading time by half - Ball coupling with safety indicator - Maximum speed: 100 km/h - Shock absorbers support the transport stand during loading All information provided without guarantee. Subject to errors and changes.