Louault Nizki Nakladalnik nakup rabljenega (2.576)

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed Lodpfjh Hm Thjx Adgshi - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high Ljdpfx Aol Uxdkodgohi At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck Lsdpeh Hm Tzefx Adgshi - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Lhjdpeh Etf Rjfx Adgoi Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) Lhodpfshlz R Sex Adgsi - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports Ljdpfx Adok Af Svogohi - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed Lhjdsmfqi Ijpfx Adgsi 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function Lodjl Ux Rwspfx Adgjhi - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Lodpfei Dwlwex Adgehi Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, konfiguracija osi: 2 osi, Leto izdelave: 2021, Oprema: ABS, Technical data for EBERT TLS 43 ST Special Low Loader: - Permissible kingpin load: 19,000 kg - Permissible axle load: 24,000 kg - Gross vehicle weight rating (GVWR): 43,000 kg - Payload: approx. 32,200 kg - Low-bed length: 9,350 mm - Axle platform length: 2,700 mm - Overall width: 2,550 mm - Loading edge/low-bed height: approx. 200 mm – 350 mm - Oversize warning signs at front and rear with red/white panels - Tyres: 245/70 R 17.5 Steering system: TRIDEC Axles: 12,000 kg Gigant Axles, hydraulic steering Lodpfxjyfp Aqe Adgjhi Electrics: - Use of NATO spiral cable, power supplied by the towing vehicle - Central warning beacon at the rear - Lateral LED marker lights - Standard vertical rear lights (LC5) Hydraulics: - Hydraulic system for steering mounted on the gooseneck Upon request, we can offer you a leasing or financing solution through Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our homepage. Subject to errors and prior sale! New general inspection, rental possible = Further information = GVWR: 43,000 kg Please contact Tobias Ebert for more details.

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2022, Oprema: ABS, Technical specifications for EBERT TLS 43 ATV Special Low Loader: - Permissible kingpin load: 19,000 kg - Permissible axle load: 36,000 kg - Permissible gross weight: 55,000 kg - Unladen weight (DIN): approx. 15,500 kg - Low-bed loading length (internal): approx. 6,650 mm + 4,000 mm - Axle table length: 3,550 mm - External width: 2,550 mm - Loading edge/low-bed height: approx. 200 mm - 350 mm, sliding table length: 500 mm - Low-bed width extension to: 3,050 mm - Low-bed telescoping extension: 4,000 mm - B-dimension: 13,300 mm - Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish - Oversize load signage at front and rear with red/white warning boards Wheels: - 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: - TRIDEC DLS with Tritronic Axles: - 12,000 kg – DLS single wheel suspension, hydraulically steered and hydraulically suspended Front high-bed: - Side walls 600 mm high Lodpfx Aoyfu N Aedgohi - Angled front corners at the high-bed - Doors in the front corners accessible from the outside - Lockable storage box with lid behind the front bulkhead, height 600 mm, width 2,480 mm, depth 7,500 mm - Spare wheel mounted on the high-bed, behind the partition wall on the right - Staircase on the right side to access the front high-bed from the low-bed - Hydraulic coupling for uncoupling on the left, 6-fold Multi-Faster coupling - 6 lashing points, 3,000 kg rating, external on high-bed (drop-down lashing rings) - 2 lashing points, 5,000 kg rating, on top of the longitudinal members (rearward) Low-bed: - Climbing aids on the boom – extendable - External frame thickness: 8 mm - Low-bed telescoping by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points, 10,000 kg rating, external in the outer frame - 24 plug-in stakes 90 x 90, evenly distributed for extending the low-bed to 3,050 mm width - 50 mm hardwood planks inserted between the extension tubes, 10 mm overhang Rear high-bed: - Rear high-bed sloped and perforated for later fitting of ramp mounting profiles using galvanized adapters - At the rear: ramp mounting profiles (Altec) – C rails - 8 lashing points, 10,000 kg rating, external on high-bed - 6 lashing points, 5,000 kg rating, in the excavator trough - 10 lashing points, 5,000 kg rating, for oversize load in external frame - Closure of excavator trough front and rear with removable wooden floor plate Electrics: - NATO spiral cable connection, power supplied by towing vehicle - Central amber beacon at rear - LED side marker lights - Standard vertical rear lights (LC5) - Work light on high-bed for illuminated low-bed area - Oversize load signage at front and rear, uncoupling control, safety sensor, and suspension pressure switch Air system: - 80 l aluminium air reservoir - TEBS modulator - Extension locking left and right (valve on side at rear high-bed) - Double release valve Hydraulics: - Hydraulic system on high-bed for steering, suspension, and detachable gooseneck Accessories: - 2 x 4 hardwood planks for low-bed extension and intermediate table support - 2 safety wedges for uncoupling - 4 wheel chocks Upon request, we can provide you with a leasing or financing offer. Mr. Ebert (Tel. ...) will be happy to assist you. More information is available on our homepage. Subject to errors and prior sale.

Stanje: rabljeno, Leto izdelave: 2019, For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Ressenig SATL2-400.1 Telescopic Low Loader for Machines Lightly used articulated low loader – telescopic, equipped with 2 hydraulically steered 12-ton axle lines Manufacturer: Ressenig (Austria) • Lower deck length: approx. 5,500 mm retracted, approx. 8,500 mm extended (telescoped) • First registration: 05/2019 • Permissible total weight: 42,000 kg • Fifth-wheel load: 18,000 kg • Rear axle load: 24,000 kg • Overall length: approx. 12,860 mm retracted, approx. 15,860 mm extended Ljdoyfrxnopfx Adgshi • Unladen weight: 13,180 kg • Payload: 28,820 kg • Width: 2,550 mm • Axles: DL-S axle lines, 12 tons each • Tridec independent suspension, hydraulically suspended and steered • Radio remote control for steering and air suspension • Tyres: 245/70 R 17.5 • Braking system: BBA air brake, EBS, spring-loaded brakes on both axles • Lowbed: telescopable by up to 3 meters, from 5.50 m to 8.50 m • Ramps: electro-hydraulic Other features: • Yellow revolving beacon • Spare wheel • Aluminium bridge inserts for use in the telescoped lowbed • Red/white extension boards for transporting oversize loads On request, we can provide you with a leasing or financing offer. Mr. Seidel (by phone) will be happy to assist you. You can find more information on our homepage. ... Subject to errors, prior sale, and changes! = Further Information = Please contact Tobias Ebert for further information.

Stanje: novo, konfiguracija osi: 2 osi, Leto izdelave: 2021, Oprema: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible fifth-wheel load: 19,000 kg; Permissible axle load: 24,000 kg; Gross vehicle weight: 43,000 kg; Unladen weight (DIN approx.): 12,500 kg; Low-bed length (internal): approx. 6,650 mm + 4,000 mm; Axle table length: 2,700 mm; Overall width: 2,550 mm; Loading height/low bed: approx. 200 mm – 350 mm; Sliding table length: 500 mm; Low-bed width extension to: 3,050 mm; Low-bed telescoping by: 4,000 mm; B-dimension: 12,000 mm; Entire vehicle flame-spray galvanized, with epoxy primer and 2K finish; Oversize warning signs front and rear with red/white panels. Wheels: 9 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS independent wheel suspension, hydraulic steering and suspension Front raised platform: - Doors in the corners left and right, accessible from outside - Storage box with lid behind the bulkhead, height 600mm, width 2,480 mm, depth 7,500 mm - Spare wheel on the raised platform, right behind the partition - Staircase on the right side for access from low bed to front raised platform - Hydraulic coupling for decoupling on left side – 6-way Multi-Faster coupling - 6 lashing points 3,000 kg spec. outside on the raised platform (recessed lashing rings) - 2 lashing points 5,000 kg spec. on top of the longitudinal beams (rearward) Ljdoyfvwbjpfx Adgjhi Low bed: - Climbing aids at the boom – extendable - Low bed telescopic by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points 10,000 kg spec. outside in external frame - 24 stake sleeves 90x90 mm, evenly distributed for low-bed extension to 3,050 mm - 50 mm hardwood planks placed between extension tubes, 10 mm projection Rear raised platform: - Front end angled and perforated, for retrofitting ramps, galvanized through adapters - Ramp intake profiles (Altec) – C rails at the rear - 6 lashing points 10,000 kg spec. outside on rear raised platform - 6 lashing points 5,000 kg spec. in excavator well - 8 lashing points 5,000 kg spec. for oversize loads on external frame - Closure of excavator well front and rear with wooden floorboard (insertable) Electrics: - Use NATO coiled cable, power supplied by towing vehicle - Rotating beacon central at rear - Side marker lights in LED design - Standard upright rear light assembly (LC5) - Work lamp on raised platform for illuminating low bed - Decoupling: safety sensor and pressure switch for suspension Air: - Aluminium air tanks 60 l (2x 10 l, 2x 20 l) - TEBS modulator - Extension locks left and right (valve on side of rear raised platform) - Double-release valve Hydraulics: - Hydraulic system on raised platform for steering, suspension, and detachable gooseneck Accessories: - 2 sets of 4 wooden planks as supports for low-bed extension and sliding table - 2 chocks for decoupling - 4 wheel chocks Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ...) will be happy to assist you. Further information available on our website. Subject to errors and prior sale! New TÜV, Rental possible GVW: 43,000 kg Contact Tobias Ebert for further information.

Stanje: novo, For inquiries regarding the vehicle, Mr. Herden will be happy to assist you (by phone: [number]). Brian James Cargo Digger Plant 2 (2,700 kg) Price: €4,630.00 net / €5,509.70 gross New vehicle, never registered! Load area dimensions: 2.80 m x 1.30 m Gross vehicle weight: 2,700 kg Payload: 2,152 kg Equipment: - Includes individual ramps - Includes spare wheel - Includes excavator bucket mount We have a very large selection of various Brian James trailers in stock and available for immediate delivery! Mr. Herden (phone: [number]) is happy to support you. We are also pleased to offer you a financing proposal upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction equipment - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Lhjdpfjyi Abzsx Adgoi We supply you with the complete Brian James product range! Subject to errors and prior sale! Internal ID: 050186 = Further Information = Payload: 2,152 kg Contact Marius Herden for further information.

Stanje: novo, For inquiries regarding the vehicle, Mr. Herden will be happy to assist you (by phone at ...). Brian James Cargo Digger Plant 2 (3,500 kg) Price: €5,910.00 net / €7,032.90 gross New vehicle, not previously registered Load area dimensions: 3.20 m x 1.70 m Permissible total weight: 3,500 kg Payload: 2,798 kg Equipment: - Incl. individual ramps - Incl. spare wheel - Incl. excavator bucket holder We have a wide selection of various Brian James trailers in stock and available for immediate delivery! Mr. Herden (Tel. ...) will be pleased to assist you. On request, we are happy to provide you with a financing offer. We are an official sales and service partner for: Ljdpfx Adsykhqqjgjhi - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in our inventory, we are also one of the largest commercial vehicle dealers in Germany. We supply you with the complete Brian James product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for more information.

Stanje: novo, For any inquiries regarding the vehicle, Mr. Herden will be happy to assist you (by phone at ...). Brian James Cargo Digger Plant 2 (3,500 kg) Price: €6,250.00 net / €7,437.50 gross New vehicle without first registration Loading area dimensions: 3.70 m x 1.70 m Gross vehicle weight: 3,500 kg Payload: 2,736 kg Equipment: - Single ramps included - Spare wheel included - Digger bucket holder included We have a wide range of various Brian James trailers in stock and available for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. Ljdpfxoykhqds Adgjhi Financing options available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We can supply the complete range of Brian James products! Errors and prior sale excepted. = Additional Information = Maximum payload: 2,736 kg Contact Marius Herden for more details.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2016, skupna dolžina: 13.210 mm, skupna širina: 2.540 mm, vzmetenje: zrak, Leto izdelave: 2016, Dodatne informacije: Znamka: NOOTEBOOM Model: OSDS-58-04V Zgradba: nizkopodni polpriklopnik Leto: 10.2016 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13.210 mm / 2.540 mm Mase: skupna / prazna: 58.000 kg / 13.120 kg Modelno leto: 2016 Vrsta vzmetenja: zračno Ljdpfowzr Hxex Adgohi Zavore: bobnaste Dvižna os: dvižna os Krmilna os: krmiljena = Več informacij = Vzmetenje: zračno vzmetenje Sprednja os: dvižna os Zadnja os: krmiljena os Prazna masa: 13.120 kg Nosilnost: 44.880 kg Skupna dovoljena masa: 58.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2012, skupna dolžina: 17.800 mm, skupna širina: 2.750 mm, vzmetenje: zrak, Leto izdelave: 2012, Dodatne informacije: Lsdoy Nlc Aepfx Adgjhi Znamka: FAYMONVILLE Model: STBZ-4VA + dolly D-2 Zgradba: nizkoplatformni polpriklopnik (nizka platforma D=8143-13173 mm / Š=2750 mm / V=510 mm) Leto izdelave: 07.2012 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 17800 mm / 2750 mm Masa: skupna/prazna: 80000 kg / 22250 kg (brez dollyja) RAZTEGLJIV / VSE OSI KRMLJENE Letnik: 2012 Tip vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljene osi Srednja os 1: Krmiljena Srednja os 2: Krmiljena Zadnja os: Krmiljena Lastna masa: 22.250 kg Nosilnost: 57.750 kg Največja dovoljena masa (GVW): 80.000 kg

Stanje: novo, konfiguracija osi: 3 osi, skupna dolžina: 13.580 mm, skupna širina: 2.530 mm, vzmetenje: zrak, Leto izdelave: 2025, Dodatne informacije: Znamka: MCCAULEY Model: MAC-S4-64 Zgradba: nizkopodni priklopnik (platforma D=8139 / Š=2530 / V=924 mm / rampe D=4000 mm) Leto izdelave: NOVO Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13580 mm / 2530 mm Mase: skupna/prazna: 64400 kg / 11480 kg Leto modela: 2025 Tip vzmetenja: zračno Zavore: bobnaste Dvižna os: Dvižna os Krmljenje: Krmiljena = Več informacij = Vzmetenje: zračno vzmetenje Sprednja os: dvižna os Srednja os 1: krmiljena Zadnja os: krmiljena Lastna teža: 11.480 kg Nosilnost: 52.920 kg Lhjdpfswkhmysx Adgji Skupna masa: 64.400 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, skupna dolžina: 17.700 mm, skupna širina: 2.600 mm, vzmetenje: zrak, Leto izdelave: 2008, Dodatne informacije: Znamka: FLIEGL Model: SVS580T Zasnova: platforma (platforma D=13.211 mm / Š=2.540 mm / V=930 mm) Leto izdelave: 09.2008 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 17.700 mm / 2.550 mm Mase: skupna/prazna: 58.000 kg / 14.310 kg Letnik modela: 2008 Tip vzmetenja: zračno Zavore: bobnaste Lodswkdmvspfx Adgohi Dvižna os: dvižna os Krmiljenje: krmiljena = Več informacij = Vzmetenje: zračno vzmetenje Prednja os: dvižna os Srednja os 1: krmiljena Zadnja os: krmiljena Lastna masa: 14.310 kg Nosilnost: 43.690 kg Dovoljeno skupno maso: 58.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2007, skupna dolžina: 13.740 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2007, Dodatne informacije: Znamka: HRD Model: Jumbo Zgradba: nizkopodna prikolica (platforma L=8916 mm) Leto: 09.2007 Vzmetenje: zračno Zavorni sistem: bobnaste zavore Dimenzije: D/Š: 13740 mm / 2550 mm Mase: polna/prazna: 45000 kg / 9180 kg Vrsta vzmetenja: zračno Dvižna os: Da Lhodpeutb Tpefx Adgji Krmiljenje: krmiljena os = Več informacij = Vzmetenje: zračno vzmetenje Prednja os: dvižna os Zadnja os: krmiljena os Lastna masa: 9.180 kg Nosilnost: 35.820 kg Skupna masa: 45.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, skupna dolžina: 23.880 mm, skupna širina: 2.540 mm, vzmetenje: zrak, Leto izdelave: 2007, Dodatne informacije: Znamka: VANG Model: Athls 111+1 Zgradba: nizkopodni polpriklopnik Leto: 04.2007 Vzmetenje: zračno Zavore: bobnaste Dimenzije (D/Š): 23880 mm / 2550 mm Masa (polna/prazna): 75000 kg / 18140 kg Znamka: VOLVO Model: FH 16 750 Zgradba: vlačilec Leto: 08.2015 Kilometri: 578339 km VIN: ... A777655 Formula koles: 8x4 Medosna razdalja: 3900 mm Motor: D16K750 VEB+ 552 kW / 750 KM / Euro 6 Menjalnik: I-Shift (ATO3512E) + retarder Vzmetenje: zračno / zračno Zavore: kolutne Dimenzije (D/Š): 7440 mm / 2550 mm Masa (polna/prazna): 44000 kg / 12230 kg Skupna masa vozila: 180 ton / DOLLY / RETARDER / GLOBE XL Vrsta vzmetenja: zračno Zavore: bobnaste Modelno leto: 2007 = Več informacij = Ledpfeyrbtbjx Adgohi Vzmetenje: zračno vzmetenje Lastna masa: 18.140 kg Nosilnost: 56.860 kg Dovoljena skupna masa: 75.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2015, skupna dolžina: 13.330 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2015, Dodatne informacije: Znamka: MCCAULEY Model: S3-44 Zgradba: nizkopodni priklopnik (platforma L=9031 mm / višina nakladanja=960 mm) Lhsdpoytarlsfx Adgji Leto: 07.2015 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13330 mm / 2550 mm Mase: bruto/prazno: 50000 kg / 10810 kg Leto modela: 2015 Tip vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljena os = Več informacij = Vzmetenje: zračno vzmetenje Zadnja os: krmiljena Lastna masa: 10.810 kg Nosilnost: 39.190 kg Skupna masa: 50.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2002, skupna dolžina: 14.150 mm, skupna širina: 2.520 mm, Leto izdelave: 2002, Dodatne informacije: Znamka: NOOTEBOOM Model: MCO-58-04V Zgradba: nizkopodni priklopnik (platforma 9900 mm izvlečna / nakladalna višina 860 mm / rampe 2800 mm / vse osi krmiljene) Letnik: 01.2002 Vzmetenje: hidravlično Zavore: bobnaste Dimenzije: D/Š: 14150 mm / 2520 mm Mase: skupna / prazna: 58000 kg / 12920 kg Lodpjwaznvjfx Adgjhi Zavore: bobnaste Krmiljenje: krmiljeno = Več informacij = Srednja os 1: krmiljena Srednja os 2: krmiljena Zadnja os: krmiljena Lastna masa: 12.920 kg Nosilnost: 45.080 kg Skupna masa: 58.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 08/2002, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 17.340 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2002, Dodatne informacije: Ledpfx Ajuwtyqsdgohi Znamka: GOLDHOFER Model: STZ-VL4 Zgradba: nizko-nakladalna prikolica (spodnja platforma 7.800 mm + 4.900 mm izvlečna / višja platforma 5.400 mm, višina nakladanja 400 mm) Leto: 08.2002 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 17.340 mm + 4.900 mm izvlečno / 2.550 mm Mase: skupna / prazna: 50.000 kg / 12.840 kg Tip vzmetenja: zračno Zavore: bobnaste Krmljenje: krmiljene osi = Več informacij = Vzmetenje: zračno vzmetenje Srednja os 1: krmiljena Srednja os 2: krmiljena Zadnja os: krmiljena Prazna masa: 12.840 kg Nosilnost: 37.160 kg Dovoljena skupna masa: 50.000 kg