Fliegl Tandemska Prikolica nakup rabljenega (11.571)

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Fodjvv D Ixjpfx Agpogc Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: Fgedowlmr Dopfx Agpsc 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: novo, največja dovoljena obremenitev: 8.665 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 910 mm, skupna širina: 2.550 mm, NEW VEHICLE Fliegl Tandem Trailer for Timber Transport with Stanchions, Model TPS 118 Holz Gross weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Load length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Further information: plus freight/setup from storage location 26639 Wiesmoor: €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled with "Load-Lock profile" for strapping hooks Front geared support leg Rear support, foldable 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open storage compartment for insertable stanchions under the loading platform 4 pairs of stanchion pockets recessed in the outer frame, internal dimension 83 x 83 mm 4 stanchion pockets recessed mid-floor, reinforced to main frame, internal dimension 83 x 83 mm 6 pairs of plug-in stanchions: w=80 / d=80 / l=2000 mm, hot-dip galvanized Note: Stanchion pockets/plug-in stanchions are not intended for the sole securing of long materials, pipes, etc. without lashing. Side underride protection in aluminum Drawbar: Tandem trailer coupling Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length 4 x 500 mm from 1,800 - 3,800 mm, currently set to 1,800 mm. (Note! Observe load distribution and drawbar load) Axles + Suspension: GFA or BPW axles (manufacturer's choice), with tapered roller bearings and S-cam brakes "Axles/chassis laser aligned" for reduced tire wear and fuel consumption Parabolic spring suspension with maintenance-free rubber-metal bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires: 235/75 R 17.5" Steel rims, factory silver Brake system: 2-line compressed air brake system Spring-actuated parking brake Integral air reservoir 2 fail-safe coupling heads at front with connection to tractor unit, ABS and ALB, ABS plug front, complete with connection cable Attention: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics: 24 Volt, multi-chamber LED lights, side marker lights in yellow LED, license plate lights in LED (Note: certain towing vehicles may trigger diagnostic errors although function is ensured) 2 white position lights at the front in LED 2 white/red lane marker lights rear in LED 2 x 7-pin ISO plug at the front, fail-safe, with connecting cable Floor: Anti-slip phenolic plywood, approx. 30 mm thick, for high point load resistance Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating notes: The gross weight specified is technically feasible. Depending on the cargo, gross weight may not be achievable due to axle/support/saddle load restrictions. Special permit required if towing length exceeds 18,750 mm. Observe national approval regulations. Registration/Plates: Country of registration: Germany with Dekra inspection and certification 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, side white and rear red Paintwork: Frame hot-dip galvanized including passivation "15 years warranty against rust-through" Fedsw N U I Hspfx Agpjgc Note: Floor corrugation due to hot-dip galvanizing possible! Vehicle from ongoing production – delivery time approx. 2-3 weeks.

Stanje: novo, največja dovoljena obremenitev: 10.600 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross vehicle weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm incl. rear incline Width: 2,550 mm Loading height: 900 mm Additional information plus pre-carriage / provisioning from stock location 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consists of Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly inclined, new design with "Load-Lock profile" for lashing strap anchoring 6 pairs of lashing rings outside in the floor/outer frame, each 5t 3 pairs of lashing rings outside in the floor, each 5t 1 at the front corners, 1 before and 1 in the rear incline at the back Landing leg at the front Foldable rear support Wheel chocks with holder Steel underrun protection Rear spray flaps across total width (not in combination with forklift mounting) Quarter-round mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Central axle trailer coupling gear Drawbar with certified 40 mm drawbar eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Drum brake axles, manufacturer's choice "Axles & running gear laser aligned" – reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5" as per manufacturer Steel wheels in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to towing vehicle 24 volts EBS, electronic braking system with EBS plug at the front, with connection cable Notice: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable Floor Steel / chequer plate floor for high point load capacity Note: Slight floor rippling possible due to welding distortion! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front bulkhead / corner stanchions 25 mm aluminium hollow profile, 400 mm high Sidewalls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame and with holder for securing the loading ramps, drive-on width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wooden overlay (tip area steel / chequer plate) gas pressure spring for single-person operation Operating instructions The indicated gross vehicle weight is technically feasible, but depending on cargo, the total weight may not be achievable while complying with the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior may occur due to improper load distribution) Special permit required if maximum train length exceeds 18,750 mm. Country-specific registration regulations must be observed. Country of registration / license plates Fgsdpfx Ajy Dzk Sjgpec Country of registration: Germany with Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline pre-installed for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white on sides, red at rear Paintwork Frame in DB 7350 Nova grey "10-year warran

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further Information Plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Support jack at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Side wall contacts toolbox when folded down. Lockable storage for loading ramps underneath the loading area NO ramps included Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axles/chassis laser measured" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalizer (rocker equalizer) Wheels and Tires 235 / 75 R 17.5" Manufacturer's choice Factory silver steel rims Brake System 2-line air brake system Color-coded lines for easier servicing Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS connector at the front including connecting cable Caution: The trailer may only be towed by towing vehicles that ensure ABS function! 2 tamper-proof coupling heads at the front with connection lines to the truck Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin tamper-proof plugs at the front with connecting cable Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, throttle must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipper Body Robust tipping body with 4 mm steel floor, steel side wall construction, continuous side walls foldable not pendulum-mounted, without lower central locking. Removable rear corner stanchions. Rear wall foldable and pendulum-mounted, lower central locking. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop side retraction springs (not available with split side walls) Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 t Operational Notes The specified total weight is technically possible; depending on the type of load, the total weight may not be achievable while observing the permissible axle/support/kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Fodpfxey Dzlcs Agpsgc Country of Registration / Plates Country of Registration: Germany With Dekra approval and report (in accordance with §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Side boards/platform RAL 5002 ultramarine blue Note! Platform interior only primed – if painted, special platform version required! Optional: loading ramps €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Fgsdstrizkspfx Agpjc Manufacturer's choi

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Fedsk N Adkopfx Agpegc Drawbar eye 40 mm plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00

Stanje: novo, največja dovoljena obremenitev: 15.080 kg, skupna masa: 21.000 kg, konfiguracija osi: 1 os, NEW VEHICLE Fliegl 1-Axle Special Low Loader Gross weight: 21,000 kg Payload: 15,080 kg Unladen weight: 5,920 kg Overall length: 13,630 mm Loading length: 9,940 mm Fgjdpfx Agsllwitspoc Low bed, tapered from wheel area down to a 210 mm loading height Hanging rail for aluminium ramps across the entire width at rear of vehicle Tow eye at rear Electric winch, pulling force 8,165 kg, with radio remote control, rope length 35 metres 1 pair of wheel recesses approx. 700 mm behind gooseneck in floor 2 pairs of plug-in wheel chocks, 4 possible locking positions Comprehensive lashing package BPW axle, drum brakes Air suspension with raising/lowering valve All lighting fully LED 1 pair of aluminium approach ramps, load capacity 12,000 kg, central storage compartment in the loading platform Frame hot-dip galvanized, outer frame painted red Additional forwarding/preparation from Wiesmoor storage location: €1,280.00 / net New vehicle without first registration, full manufacturer’s warranty Vehicle available immediately Hire purchase offer: Term 48 months, residual value 40%, deposit only the VAT Monthly payment: EUR 899.00 (Other terms possible)

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Total weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Overall length: 21,000 mm Loading length: Platform internal length approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Additional Information: New vehicle from ongoing production, available from approx. calendar week 8/2026 Rear telescopic support 4 wheel chocks with holders 4 pairs of flush-mounted container locks in the floor for 1 x 40 ft. container or 2 x 20 ft. containers 1 spare wheel carrier for 1 spare wheel, including wheel fixing kit, basket type design 11 pairs of stake pockets set into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with opening for lashing strap or chain attachment 20 insertable stakes, W=80 / D=50 / L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each with 3.5 t capacity, embedded in the side frame – in the neck section 13 pairs of folding lashing rings, each 10,000 daN, freely pivoting in the side frame profile (also suitable for oversize load securing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raising and lowering 1st axle automatic lift axle, additionally with forced lowering including start assist with control button on semi-trailer, no cab operation with raising & lowering valve + auto-reset function Wheels and tyres 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver Fgsdpoumha Nefx Agpec 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights in LED 2 white/red rear contour lights in LED 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, activated by reverse light 1 removable rotating beacon on the underrun guard 1 x 7-pin socket at rear 6 side sockets, 2x front bulkhead, 2x support legs, 2x rear end (left + right) 7-pin 2 work lights, recessed in the upper front wall incl. switch 2 pairs of overwidth boards, each with 2 LED marker lights per board, laterally extendable to 3,500 mm, additionally pluggable onto loading area (infinitely adjustable width) Fixed steel front wall 1,200 mm high, with robust steel corner posts without corner chamfer, side straight loading 2 lashing holes top inside and outside in the upper front wall corners Chassis front hot-dip galvanized + outer frame visible area Final painted in RAL 3002 Carmine Red Chassis rear hot-dip galvanized + outer frame visible area Final painted in RAL 3002 Carmine Red Front wall RAL 3002 Carmine Red

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Fgsdpfxov D T R Ej Agpec Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 630 mm, skupna širina: 2.550 mm, Vehicle / Body type: Tandem Low-bed Trailer First Registration: New vehicle Gross Weight: 10,500 kg Unladen Weight: 2,500 kg Fgjdpfjwwab Aex Agpoc Payload: 8,000 kg Overall Length: 7,280 mm Loading Length: Platform length approx. 5,500 mm Width: Platform width 2,050 mm / 2,550 mm Loading Height: Platform height 630 mm Further Information: plus pre-carriage / provision ex works from storage location 26639 Wiesmoor €1,280.00 / net - Overall height approx.: 2,900 mm - Side wall height approx.: 400 mm - Frame RAL 5001 Green Blue Chassis Central Axle Low-bed Trailer Fine-grain steel welded construction Telescopic support leg at front Telescopic rear supports Wheel chocks with holders Steel fenders over both wheels Drawbar fitting central axle trailer Drawbar with tested 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles at our discretion, with tapered roller bearings and S-cam brakes "Axles/chassis laser-aligned" for reduced tyre wear and lower fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balance) Wheels and Tyres 235 / 75 R 17.5" as selected by manufacturer Steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS socket at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, TTS Platform Deep-set steel trough, platform floor with steel/chequer plate finish, steel side walls solidly welded to the floor Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle, 24 Volt ABS and ALB, with ABS socket at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate illumination (Note: with certain towing vehicles, incorrect diagnoses may occur even if functionality is present) 2 white LED position lights at the front 2 white/red LED marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable, parking sockets for electrics / ABS / air connections on the drawbar TTS Platform Deep-set steel trough, platform floor with steel/chequer plate finish, steel side walls solidly welded to the floor Platform length 5,500 mm Trough front and sides with "Load-Lock profile" for lashing strap attachment (8 pcs. front, 16 pcs. per side) Note: Minor floor unevenness possible due to welding distortion! 2 pairs of lashing rings, 1 x at the front corners of the steel trough and 1 x at the rear floor, each 5 t 3 additional pairs of lashing rings in the floor, each 5 t 4 pairs of lashing rings bolted to the side walls Loading Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable, with handle on the ramps Ramp surface with "Mega Grip" from serrated grating (tip section with steel/chequer plate) with gas strut for single-person operation

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Fgedpfxeynvrwo Agpsc Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: novo, največja dovoljena obremenitev: 8.580 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further information plus pre-carriage / provision ex storage location 26639 Wiesmoor €1,280.00 / net Chassis: Central axle tipper trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball bearing mount Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underride protection Rear mudflaps across the entire width (not in combination with forklift holder) Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! Sideboard contacts the toolbox when folded down. Fjdpfxoy Dzlij Agpsgc Lockable storage compartment for loading ramps under the loading area Central axle trailer drawbar Drawbar with certified 40 mm drawbar eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235/75 R 17.5" manufacturer’s choice Steel rims, factory silver Braking system 2-line compressed air brake system Color-coded piping for easy service Hand spindle parking brake 24 volt ABS and ALB, front with ABS connector and connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! 2 non-swappable coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 to 24 volts, multi-chamber LED lights, side amber LED lighting, LED license plate lights (Note: certain towing vehicles may cause false diagnostic errors, despite proper function) 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin non-swappable connectors at the front, with connecting cable 1 additional LED work light at the rear, controlled via reversing light Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic delivery rate of 55 l/min). Hydraulic connection with SVK plug NW 10/3, including connecting hose Operation hydraulically via truck PTO Tipper body Robust tipper body with 4 mm steel floor, steel sideboard structure, continuous side panels, foldable and swinging with central locking at the bottom. Rear corner posts plug-in. Rear panel foldable and swinging, with central locking at the bottom. Bed length approx. 5,000 mm, sidewalls with 6 lower hinges. Sideboard retraction springs (not possible with foldable front panel) Bed width 2,420 mm 3 pairs of lashing rings in the floor, each 5 tons Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be achievable within the permissible axle/support/kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Coating Frame hot-dip galvanized, including passivation "15 years warranty against rust-through" Sideboard/platform RAL 9010 pure white Note!

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Fgsdpfonzlg Dsx Agpsc Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable Fgsdpfxerducpe Agpoc 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer Fgedpfx Asut Idnegpsc First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Lashing points low-loader 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl tandem low-loader with ramps, model TPS 118 Chassis fully hot-dip galvanized – sidewalls aluminum Vehicle from current production – delivery time approx. two weeks Gross weight: 11,800 kg Empty weight: 2,960 kg Payload: 8,840 kg Total length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Further information plus pre-carriage / handling from storage location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Slightly sloping outer frame, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing rings on the exterior floor, each 5t 1x front corners, 1x in front and 1x in the rear slope at the back Pair of lashing rings on the exterior floor / outer frame, each 5t Support leg at front Foldable rear support 2 wheel chocks with holder Side impact protection aluminum Underrun protection galvanized steel Spray flaps at the rear across the full width (not in conjunction with forklift holder) Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar arrangement for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max adjustment 300 mm Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalizer) Brake system 2-line compressed air brake system Color-coded line layout for easier servicing Hand spindle parking brake 2 key-proof coupling heads at front, with connection lines to towing vehicle 24 volt ABS and ALB, ABS socket at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 volt, multi-chamber taillights, side yellow LED lighting 2 white position lights at front LED 2 white/red lane marker lights at rear 2 x 7-pin key-proof plugs at front, with connecting cable Floor Steel / checker plate floor for high point load capacity Note: Light floor warping due to welding distortion possible! Platform length: approx. 6,200 mm Rear slope approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high Sidewalls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions in sidewall height, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions bolted to frame with holder for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wood-covered (ramp tip with steel/checker plate) gas strut for single-operator handling Paintwork Frame hot-dip galvanized with passivation "15-year warranty against rust-through" Fgodpsv E Dqlofx Agpoc Front wall RAL 9006 white aluminum Sidewall RAL 9006 white aluminum Loading ramps hot-dip galvanized Hire purchase offer: 48-month term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED Fgsdpoxrx Nlsfx Agpsc 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Fsdpfxellwhnj Agpogc Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. plus freight/preparation ex stock Wiesmoor €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: novo, največja dovoljena obremenitev: 34.310 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Vehicle / Superstructure: Trailer Container Chassis Semi-Trailer Unladen weight: 3,690 kg Overall length: 13,500 mm Width: 2,520 mm Fifth wheel height approx.: 1,120 mm Further information - 3-axle - Frame hot-dip galvanized incl. passivation - 1 x 45 ft with long gooseneck tunnel and angled front corners - 24 t 2-speed landing gear, single-sided operation - Side underrun protection aluminium, rear underrun protection galvanized steel, rear underrun protection extendable for 45 ft container - Plastic toolbox Fgsdjk N Acujpfx Agpsc - Air suspension - 1st axle automatic lift axle - Tyres: 385/55 R22.5 - 2x 7-pin and 1x 15-pin electrical sockets at the front From ongoing production

Stanje: novo, največja dovoljena obremenitev: 13.200 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.550 mm, Gross vehicle weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Load length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Fgjdpfsr Da Uvox Agpjc Additional information: - Chassis painted in stock colour Nova grey - Wooden floor 70 mm - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring lift assistance - Foldable rear supports - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of ring lashing eyes recessed in the outer frame (convertible to stake pockets), each rated at 5 tonnes; 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 tonnes - 50mm drawbar eye - Air suspension - Lift and lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at front - LED revolving beacon - 2 pairs of double warning boards, LED illuminated, extendable to 3m plus advance transport/setup from warehouse 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Low Loader Semi-Trailer with Ramps, Type SDS 470 T Gross Weight: 41,000 kg / 47,000 kg Unladen Weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall Length: 13,300 mm Loading bed: 9,200 mm Fsdpfjk N Aflex Agpjgc Ramps: 2,800 mm x 750 mm with spring assist Air suspension Excavator arm recess Large lashing package 70 mm hardwood flooring SAF axles, 3rd axle self-steering Plus pre-carriage / provision ex stock Wiesmoor €1,280.00 net Vehicle available immediately from stock. Hire purchase offer: Term 48 months, 40% residual value, down payment VAT only. Monthly installment EUR 999.00 (net only)

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical bearing Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflaps Quarter shell mudguards 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm Note! Side wall touches the toolbox when folded down. Lockable storage compartment for loading ramps under the loading area Central axle drawbar coupling for trailer Drawbar with certified 40 mm draw eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension GFA drum brake axles "Axles/chassis laser-aligned" reduces tire wear and fuel consumption Fgjdpey Dzk Eofx Agpec Parabolic suspension with maintenance-free steel-rubber bearings and mechanical load equalization (rocker balancing) Wheels and Tires 235 / 75 R 17.5" manufacturer’s choice Steel rims, factory silver Braking System 2-line pneumatic braking system Color-coded piping for easier maintenance. Manual spindle parking brake ABS and ALB, with ABS connector at front, with connecting cables Warning: The trailer may only be towed by vehicles that ensure effective operation of the ABS! 2 foolproof coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multichamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connecting cables Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable, Low-pressure cylinder up to max. 170 bar, without restrictor. If required, to be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic operation via truck PTO Tipper platform Sturdy tipper body with 4 mm steel floor, steel side boards, continuously hinged and swinging with central locking at the bottom. Removable corner posts at the rear. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Tailgate retraction springs (not possible with divided side walls) Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 t Operating instructions The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable while observing the permissible axle, support, and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Registration country / plates Registration country: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides, red on the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against corrosion" Side board/platform RAL 9005 deep black Optional loading ramps €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm Width: 2,520 mm Loading height: 860 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net Chassis Low-bed trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holder Aluminum side underrun protection Full-width rear spray flaps (not in conjunction with forklift holder) Quarter-shell mudguards in front of 1st axle Anti-spray flaps behind the 2nd and 3rd axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable deck widenings to 3,000 mm (not in rear incline area) (Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading deck 70 mm timber planks for widening to 3,000 mm Tie-down points low-bed 1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t 4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps) 7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t - 1 x front in gooseneck section - 6 x on lower deck First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm 5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10 t - 1 x on gooseneck (overhanging) - 1 x in floor behind last axle Towing unit trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + suspension BPW drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing) Wheels and tires 235 / 75 R 17.5" manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 error-proof coupling heads at the front with connecting lines to towing vehicle 24V ABS and ALB, with ABS socket at the front and connecting cable Fodpfx Aowlmr Rogpegc Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (removable lamp) 2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed into drive-over slope of gooseneck Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area Rear slope with 70 mm softwood floor Low-bed area incl. rear slope: 6,500 mm Access ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment) Wood surfaced (tip area with steel/chequer plate) With spring-assisted lifting Operating instructions With 10,000 kg axle load, a special permit is required, only

Stanje: rabljeno, največja dovoljena obremenitev: 6.800 kg, skupna masa: 8.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 700 mm, skupna širina: 2.550 mm, Skupna masa: 8.900 kg Prazna masa: 2.100 kg Nosilnost: 6.800 kg Fodpfjycbkbjx Agpegc Skupna dolžina: 5.950 mm Nakladalna dolžina: dolžina kesona 4.000 mm Širina: širina kesona 2.050 mm / 2.550 mm Nakladalna višina: višina kesona cca 630 mm Dodatne informacije - Prednja teleskopska podporna noga - Vlečna gred nastavljiva po višini preko vretena - Varjena konstrukcija iz drobnozrnatega jekla - Parabolično vzmetenje - Jekleno rebrasto dno - Velik paket pritrdišč - Rampe iz mrežaste rešetke