Wiese Gabelstaplertransporter Mit Rampe nakup rabljenega (11.738)

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: Itjdjylfvgepfx Ahkof * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Iodpfx Ahoywvhrokstf

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2002, Kiper-nizkopodni kombi. Dozvoljena ukupna masa 10.500 kg, nosivost 7.550 kg. Trosmerna kiperska nadogradnja, dimenzije otprilike 5.000 x 2.420 x 400 mm (unutrašnje), 4 ušice za vezivanje tereta, bočne stranice od čelika, viseće i preklopne, sa centralnim zaključavanjem. 1 par aluminijumskih utovarnih rampi u bravom zaključanim pregradama ispod sanduka kipa. Visina utovara u praznom stanju oko 900 mm. Dvostepena potporna noga napred, sklopive zadnje potpore. Vučna kuka prečnika 40 mm, vučna ruda sa besprekornim podešavanjem visine. Dvovodna pneumatska kočnica, jednovodna hidraulika, 24 V. BPW osovine, parabolične opruge, ABS. Pneumatici 235-75R17.5. Šasija siva, kip most zelene boje. Tehnički pregled važi do juna 2026. Prodaja u viđenom stanju. Aluminijumske rampe Iodpfx Aeyw Hw Rohkstf = Dodatne informacije = Vlastita masa: 2.950 kg Nosivost: 7.550 kg Dozvoljena ukupna masa: 10.500 kg Pneumatici napred: 235-75R17.5 Pneumatici nazad: 235-75R17.5 Zemlja porekla: Nemačka Kontakt osoba: Jan-Marc Schwickert za dodatne informacije.

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja. Iodpfsyxbgcox Ahkstf

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Isdpfxoyw N Npj Ahkotf Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon Ijdpjn Aw Hkofx Ahketf =====

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 30505 * Remote diagnosis unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator activation * GVW: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, drop side panels, laser-welded, pendulum-mounted, fold-down and removable, prepared for later retrofitting of side wall extensions * Lockable compartment under the tipping bridge for access ramp * Incl. 1 pair of aluminum loading ramps, 8t/pair, 3.57m * Galvanized chassis, galvanized front wall * 4 UVV lashing rings LC 5,000daN at front and rear + 8 recessed and foldable lashing points LC 3,000daN in tipping floor (centered) * Hardwood excavator bucket rest * Two-step access in front of the front wall (galvanized) * Stepless height-adjustable drawbar, galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, rear staking posts bolted, galvanized * Extension cables for rear side panel * Plastic toolbox on right chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: for example, €549 per month over 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! Itedpfx Aheyvxg Isksf * We are Müller-Mitteltal trading partners * Free delivery to your site possible with timely order! ----Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours by appointment We speak German, English, Polish, and French. Whatsapp

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign kits at the front and rear * Front: closed plastic mudguards, rear: straight galvanized steel mud flaps, each with splash guards * Contour marking tape, reflective, on sides and rear * Foldable (hot-dip galvanized) tool box cover on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets each side (no stakes included), also suitable for lashing * Load securing package consisting of: 2 lashing points (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame (13.4 t in corners, otherwise 10 t) * 6 pairs of mechanical folding outriggers for total width of 3 m (not in the rear slant) * Widening planks stored in the center of the loading area * Excavator arm support over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm support) * Mechanical one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp displacement * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach incline) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross technical weight of 30,000 kg possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty Itedpfjx Ipa Nsx Ahkjf * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle compensation * Side underrun protection * Rear swivel supports on chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash protection * Contour tapes on sides and rear, reflective * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (no stakes present) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings - swiveling and retractable, loadable in all directions and integrated in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted laterally in the arm rest) Iedpfx Aex Ipavehkstf * Mechanically operated one-piece loading ramps with spring assembly (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, tow bar, and loading ramps hot-dip galvanized * Axles, springs, air tank, etc., painted in black * 235/75 R17.5 twin tires * 5,900 kg curb weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi * Nemška prikolica * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS * BPW osi * 40 t Itsdpfsyuri Esx Ahksf * lastna teža: 9300 kg * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) Isdsl Tik Nspfx Ahkstf * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height Itedpfx Ajl Tphrjhkjf * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 17.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, naslednji pregled (TÜV): 01/2027, širina tovornega prostora: 2.500 mm, ? Hidravlične rampe ? Razširljive ? 8 pritrdilnih ušes na vsaki strani ? Nosilec za rezervno kolo ? Nakladalna višina: ca. 930 mm Iodpfxsytz Hws Ahketf ? Bobnasta zavora ? Duomatski priključek ? Listnato vzmetenje ? Dvojna kolesa Vse informacije brez jamstva / Možen vmesni prodaj.

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Tyre pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equaliser unit * Drawbar height adjustable by approx. 300 mm, with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right-hand side at the front of the chassis * 15-pin power connector * LED taillights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central lock bearings as well as 2 at the front wall * Chassis made from high-tensile fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal tube reinforcement — without central stanchions — foldable with drop-side spring assistance) Itjdpfox Hm Rcjx Ahkof * Rear stanchions bolted * Combination steel double-wing rear door, asymmetrically split, can be swung and locked 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanised rotary bar latch at the rear and central locking, deactivation function for automatic rear door operation when tipping in reverse with open wing door * Lashing points: 1 x 5 t per corner and 4 x 3 t per side, integrated in the outer frame * 4 mm floor plate made of fine-grain steel * Rear ramp receiving rail * Reinforced body with load securing certificate * 1 pair aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment recessed beneath the loading surface in the chassis for ramps * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanised * Axles, springs, air tank, and landing gear painted in black * Tyres 358/55 R 19.5 * Sideboard coating in RAL 9010 pure white * Side wall paint in an RAL colour of choice available at extra cost * Errors and prior sale excepted * Available immediately from calendar week 10/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) Iodpfex Hm Rijx Ahkjtf * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer assembly * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front right side of the chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking area as well as 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong sideboards (continuous upper side walls with internal reinforcement tube—without center stanchions—can be folded down with board wall assist spring) * Bolted rear stanchions * Combination steel swing rear doors, 2-wing asymmetrically split, swiveling and lockable up to 270°—not foldable—additionally with pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at rear and central locking system, deactivation function for automatic tailgate when tipping backwards with opened swing door * Each corner fitted with 1 x 5 ton lashing point and 4 x 3 ton lashing rings on each side, recessed into the outer frame * 4 mm floor plate made of fine-grain steel * Rear guide rail for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons/pair), suitable for pneumatic-tyre and tracked vehicles * Lockable storage compartment from the rear, recessed under the loading deck in the chassis for the ramps * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a black tone * Tires: 358/55 R 19.5 * Sideboard paint finish in RAL 9010 pure white * Custom RAL colors for side walls available at extra cost * Errors and prior sale excepted * Immediately available from calendar week 10/2026 * Sample images

Stanje: rabljeno, lastna masa: 2.910 kg, največja dovoljena obremenitev: 7.590 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2009, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, rear support, swinging tailgates. Ijdpfov S H Sfox Ahkotf Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost from €900 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, naslednji pregled (TÜV): 03/2024, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 910 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear supports, side aluminum underrun protection, twin tires, storage box Body: Hydraulic ramps, extendable to 3m. BPW axles, drum brakes, lashing rings on the outer sides. Ramp length approx. 4000mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Itjdpfxsqpgtme Ahksf

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug Iodpfx Ahetplwiekjtf * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale Iedjq Dyv Iopfx Ahkotf * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector Iodpfexptn Rjx Ahkstf * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized * Axles, turntable ring, air reservoirs, towing fork painted black * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area Iedpfxotplwfe Ahkjtf * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive Itsdow Tgkbepfx Ahkef * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm Iodpfepk D Dqox Ahkjtf * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: Isdpfx Ahendpn Sekstf * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension of 250 mm for a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck cab via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrics ----General attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Pre-equipment in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet * Rear stakes bolted * Drop sides with spring-assisted lifting mechanism ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various drill holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the centre longitudinal axis, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm spacing) * Hydraulic flow divider in the trailer (when hydraulic pump output in truck exceeds 40 l/min, max. 140 l/min) ----Paintwork: Itsdpfxerwc R Re Ahkof * Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized * Axles, springs, air tanks, landing gear and flange eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls available painted in any RAL colour for an additional charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from approx. week 16/2026