Tt Tandemtieflader, Hydr. Rampen, Wenig Benutzt nakup rabljenega (6.141)

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.400 h, Hidravlični hitri menjalni sistem / HS3, 3 žlice 1190 mm, 600 mm in 400 mm, linija za prijemalo in kladivo, LED osvetlitev, motor YANMAR, dobro stanje, vozilo je lahko opremljeno z oglaševanjem in/ali označeno. Rodpfx Aowkzd Esn Ejt

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 2.640 h, Oprema: pogon na vsa štiri kolesa, Motor: 4-valjni Yanmar turbo, hidravlični sistem hitre menjave, vilice za palete, žlica približno 0,75 m³, krmiljenje na vsa kolesa, pnevmatike približno 60%/70% dobre, vozilo je lahko polepljeno in/ali označeno z oglaševalskimi napisi. SI85718 Redpfjv U H Nvex An Eet Naša ponudba je praviloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni dobavni in plačilni pogoji. Z veseljem vam pripravimo ponudbo financiranja ali leasinga za ta objekt. Kontaktirajte nas!

Stanje: novo, največja dovoljena obremenitev: 1.730 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.240 mm, TRAILERWIRTZ – your online pickup marketplace for new trailers, offering top brand manufacturers! Over 850 new trailers in stock Redpfx Ansyhwvys Eot More than 130 used trailers always on offer at trailershop Non-binding example: New production Vehicle transporter T 231 550x224cm 3500kg tridem high-loader with ALKO Bradley low-frame V chassis, 10” wheels with 195/55R10 steel rims in silver, perforated driving ramps, rear sloped, detachable side railings at front, Sideline black, rear ramp for loading 240cm, noise-free mounted at the top, lockable underfloor storage box, support wheel, lockable ball coupling... Image may differ T transporters are available in many different sizes and configurations. Don’t hesitate – available while stocks last! Sales & telephone order acceptance opening times: MON - FRI 08:00 to 12:30 & 14:00 to 18:00 Or order around the clock from our online shop at trailershop Content and images are subject to copyright – Logos and trademarks protected 02/26 231-5522-35-3-10BLACK Images and all information non-binding

Stanje: rabljeno, največja dovoljena obremenitev: 24.000 kg, skupna masa: 34.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/1988, naslednji pregled (TÜV): 06/2026, Labodji vrat Dolžina: 3350 mm Širina: 2.490 mm Krmilni radij: 2300 mm Sedlasta obremenitev: 14.500 kg Višina priklopa: 1.300 mm Nizka postelja Nakladalna površina dolžina: 4660 mm vklj. 400 mm posnetja Širina: 2.500 mm Razširljivo do 3.000 mm Višina nakladanja: 650 mm Podvozje Višina nakladanja natovorjeno: 900 mm Dolžina: 3.000 mm vklj. 800 mm posnetja Širina: 2.500 mm Posnetje: 800 mm Zadnja podpora hidravlična 2-delne hidravlične rampe Dolžina 1: 2.500 mm Dolžina 2: 1.100 mm Širina: 720 mm Rsdsxc Dbhopfx An Eet Sedlasta obremenitev: 14.500 kg Obremenitev zadnje osi: 2 x 10.000 kg Skupna masa: 34.500 kg Nosilnost: 24.000 kg Lastna teža: 10.500 kg

Stanje: rabljeno, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 01/2013, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, * Demmler TT 119 tandem low-loader trailer for milling machine transport * First registered: 2013 * Support for conveyor belt * Air suspension * Adjustable drawbar * 3 ramps * Payload: 8,900 kg Rsdpfx Aot Ux Dbjn Ejt * Unladen weight: 3,000 kg * Gross vehicle weight: 11,900 kg * Platform dimensions: 6.10 m x 2.0 m x 0.40 m * Loading height: 70 cm * Ramp length: 2.50 m

Stanje: rabljeno, največja dovoljena obremenitev: 21.660 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1994, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.400 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Polpriklopnik Prva registracija: 03/94 Skupna teža: 28.000 kg Lastna teža: 6.340 kg Nosilnost: 21.660 kg Skupna dolžina: 12.220 mm – 14.220 mm Dolžina nakladalnega prostora: cca 11.900 mm – 13.900 mm Širina: 2.550 mm / Nakladalna širina cca 2.500 mm Višina nakladanja: cca 1.400 mm Dodatne informacije: - Prednja stena 950 mm - LED vzvratne luči - 1. os je dvižna - Obremenitev agregata 18.000 kg - Hidravlično izvlečni zadnji izvlek - 2 m teleskopski izložni krak - Priključna mesta za kole in kole - Zračno vzmetenje - 6 parov priveznih obročev Rodjyn Uzwopfx An Eot - 2x plastična škatla za orodje - Višinsko nastavljive sredinske podporne noge - Zaščita podvozja - BPW osi Vozilo je lahko polepljeno in/ali potiskano z oglasnimi napisi

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V Redpsq Dyv Isfx An Eet * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs, 110 mm wide, with tandem equalizer unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profiled steel sheet, foldable with board spring lifter * Steel rear wall, insertable between the ramps (holder for unused panel inside the front wall) * Bolted rear stanchions * Outer frame perforated and angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Possible installation of 3 t recessed lashing rings every 600 mm Rjdpfel Th Hwex An Eet * In each corner front and rear: 1 x 10 t lashing ring; various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis for lashing up to LC 3,000 daN * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Side boards painted RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Axles, springs, air tank, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Rjdotplwfepfx An Eot * Available from CW 19/2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs (110 mm wide) with tandem equalizing unit * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Sidewalls made of trapezoidal-profiled steel sheet, foldable with drop-side spring lifting device * Steel rear wall, can be inserted between the ramps (storage bracket inside front bulkhead when not in use) Rjdpel Th Hlsfx An Est * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In each front and rear corner 1 x 10 t lashing ring; various holes in the front and rear crossmember for 1.2 t lashing options * Profifix lashing rail mounted centrally along longitudinal axis, lashing capacity up to LC 3000 daN * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear drive-on slope approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Platform sidewalls painted in RAL 9010 pure white * Sidewalls can be painted in any RAL color at extra cost * Axles, springs, air tank, flanged tow eye and landing gear painted black * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available approx. from week 21/2026 * Example images

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring actuators * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower system plus RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors to display total axle load * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General fittings: * Side underrun protection * Landing gears at the front and mechanical swiveling supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the right side under the chassis ----Low-loader platform: * Saddle platform with 45° chamfered front corners and front tool box made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- plugged in at the back * Rear slope on the saddle platform to the low-bed approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Tread plate above the axles ----Extensions: * 8 x mechanical folding extensions up to 3 m overall width, but not in the rear slope (extension planks available with storage on the saddle platform) * Mechanically adjustable warning sign packages at the front and rear ----Load securing (Lashing package): * On the saddle platform, 2 x 6.3 t lashing points each as well as 3 x 5 t lashing bars on each side of the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes on each side as well as 1 lashing point in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck on the low-bed platform ----Excavator stick recess: * Excavator stick recess from the end of the last rigid axle via the steering axle to the rear cross member, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Drive-on ramps: * Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofit of hydraulic ramp adjustment * The outer slat of the drive-on ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck between 40 and 120 l/min) ----Loading dimensions: Rsdjpk D I Aspfx An Eet * Loading area saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, drive-on ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include equipment not matching the offered vehicle ----Delivery time: * Available

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system and Ride-on-Road (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an information tool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Lateral underrun protection Rjdpfx Ansl Tnvgj Eot * Landing legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear end wall -150 mm- inserted high * Rear slope on the fifth wheel platform to the low bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and low loader deck with 60 mm wooden planks * Checker plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, not on the rear slope (extension planks available and stowed on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side, and 3 x 5 t lashing bars on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t swivel-mounted and retractable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side, and 1 lashing ring at the rear in the excavator stick recess * 2 x container locks immediately after the gooseneck on the low-bed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last rigid axle, over the steering axle, to the end cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanically single-piece, fully hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulically movable ramps * The outer board of the access ramp is made of 50 mm hardwood * Climbing bars on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flows from 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm slope) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, access ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle ----Delivery Time: * Available from c

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable Rjdjyl E Dqepfx An Eot With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized

Stanje: novo, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Leto izdelave: 2025, Oprema: ABS, You can find our complete range of vehicles, including those available for immediate delivery or short notice, on our website. Below is an excerpt from the equipment specification. The complete specification is available upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double-extending design, length approx. 9,300 mm * A support table approx. 200 mm wide is solidly welded to the central beam * Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the relevant cargo bed length (except the supply for the first locking point) * Technical fifth wheel load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Rjdpfx Anoxc Axxo Eet * TPMS tire pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntable * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Make: our choice * ASPÖCK UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations. No supply connections installed on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings at the kingpin (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets embedded in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted on the deck of the gooseneck for plug-in stakes approx. 100 x 50 mm; 1x at rear of gooseneck * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm wood flooring on the gooseneck and cargo area encased in ALU-omega profiles * 10 pairs of recessed lashing rings lying in the outer frame of the cargo area, foldable outward: - 1 pair of lashing rings each in front of the last axle and on the end traverse of the trailer (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets embedded in the outer frame of the cargo area, for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left * Steering from front and rear via cable remote control, with single-track control of the axles, without installation on the tractor unit * Front wall made of steel, approx. 1,800 mm high, certified version according to EN12642:2016 XL * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light mounted left and right at the landing legs, wired to the tractor unit connection * 3 transverse stake pocket rails mounted on the cargo area floor, for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left * WADER container pockets integrated in the cargo area for the transport of: - 1 x 20' container at the center of gravity - 2 x 20' containers - 1 x 40' container * 1 LED work light each left and right in front of the axles

Stanje: rabljeno, največja dovoljena obremenitev: 2.300 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2015, Notr. št.: B - 06 Po naročilu stranke Fliegl * TTS 30-30 * Nizkopotni polpriklopnik * Rampe * 2-osni * dovoljeno skupna masa 3000 kg * zelo dobro ohranjen, malo uporabljen Možna menjava Financiranje od 3,99 % Redsxvf U Nopfx An Est Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema, navedena v oglasu, je treba preveriti ločeno. Vsi podatki v oglasih so nezavezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 ter po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 24.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1993, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.500 mm, ? Hidravlične podporne noge ? Kolesne vdolbine ? 3 žepki za stebričke na vsaki strani ? 4 pritrdilne ušesce na vsaki strani ? Hidravlične rampe ? Bobnasta zavora ? Zračno vzmetenje ? Dvojna pnevmatika ? SAF osi Vse informacije brez garancije / Vmesna prodaja pridržana. Redpexuykiofx An Eot

Stanje: rabljeno, Leveling blade with spring tines, standard replaceable tip, hydraulically foldable / double crumbler roller with mechanical depth adjustment, lighting, category II / III hitch / Rsdstt Dacopfx An Eet

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 2.080 h, * SANY SY265C LC * Crawler Excavator * Excavator * Good condition * Year of manufacture: 2019 * Operating hours: 2,040 Redpsxzabuofx An Est * Overall dimensions: 10,290 x 3,225 x 2,990 mm * Engine: Cummins, Stage IV, approx. 194 HP, 809 Nm, 6,700 cc * Hydraulic system: Load Sensing, max. 2x 246 l/min * 1st proportional auxiliary circuit (grapple/hammer) on joystick 1 * 2nd non-proportional auxiliary circuit (GRL) on joystick 2 * Safety lifting valves for arm and boom with overload indicator * Double-acting quick coupler hydraulic circuit * Swing brake * 8 travel speeds * Bucket breakout force ISO: 187 kN * Arm tear-out force ISO: 130 kN * Operator cabin: ROPS * Boom: 5,900 mm, stick: 2,950 mm * Wear strips included as standard! * Mono boom * 800 mm track shoes * SWE Verachtert CW 40 hydraulic quick coupler * Central lubrication system * Front and roof protective grid * Complete piping * Refueling pump * Operating weight: 29,500 kg * Track width: 800 mm * Fuel tank: 465 L * AdBlue tank: 38 L * Hydraulic tank: 230 L * Operator station: * ROPS/FOPS cab with silicone-rubber mounts * Short joystick + multifunction controls * Heated air-suspended seat * Color display * Air conditioning with heating * Radio * Camera * 12V + 24V power supply * Document compartment, cup holder * Rear-view mirror * Emergency hammer * Overload warning device * Main battery switch * Engine emergency stop switch * Equipment: * 4x LED roof work lights * Boom-mounted LED work light * Platform LED work light * Travel alarm and rotating beacon * Engine emergency stop switch * Radio with speakers * Automatic climate control * Foldable front windshield * 8x auxiliary circuit flow settings via on-board computer with multifunction monitor * Floor mat ATTENTION!!!!! PLEASE READ!!!!! We expressly reserve the right to prior sale as this item is also offered on other platforms. We strongly recommend an inspection and test to avoid any misunderstandings regarding the condition and suitability of the machine. Inspections and tests are possible at any time by appointment and are expressly encouraged!!! Images are for reference only and may include optional equipment subject to extra charges. The specified internal measurements are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND PAYMENT OF DIFFERENCE POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, lastna masa: 500 kg, največja dovoljena obremenitev: 1.300 kg, skupna masa: 1.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.580 mm, višina nakladalnega prostora: 1.900 mm, vzmetenje: drugo, velikost pnevmatike: 185 r14 c, Box Trailer Major X-pert Edition Outstanding box trailer with an attractive design. 315x158x 1800 kg, single axle 100 km/h Ramp + side door Low fuel consumption, comfortable driving, sandwich panel construction Redpsqwkt Rjfx An Est Equipped with special rails for attaching lashing rings anywhere, allowing cargo to be secured at any position. If you have any questions, please send us a message or call us! Technical modifications, price changes, errors, and prior sale reserved. We accept no liability for errors or typographical mistakes.

Stanje: novo, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, vzmetenje: drugo, Durability is the new efficiency. *IMMEDIATE AVAILABILITY* High-loader 3116 GD 2000kg - Winch and ramps - 30 cm drop sides - 70 cm leaf mesh sides, swingable Rsdsqw Algspfx An Ejt * Overrun brake with automatic reversing function * Chassis, axles and V-drawbar galvanized * Rubber suspension axles * Lighting bar * Reinforced, folding, centrally positioned jockey wheel * 10 lashing rings * Net hooks * Support legs * Aluminum sidewalls * All 4 sides foldable and removable Technical specifications Axle(s): 2 Braked: Yes Unladen weight: 429kg Gross weight: 2000kg Load bed length: 311cm Load bed width: 160cm Loading height: 56cm Side wall height: 30cm Drive-on ramps: Yes Storage compartment for drive-on ramps: Yes If you are offered the same trailer at a lower price, please provide us with the offer! If you have any questions, send us a message or give us a call! Subject to technical modifications, price changes, errors and prior sale. No liability is accepted for errors or typographical mistakes.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) Redpfx Aorgzv Nsn Ejt * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) Rjdpfotx Nwnex An Est * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Drawbar Eye: * Drawbar height-adjustable by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted on the front right side of the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled steel drop sides with spring-assisted opening * Steel rear wall can be inserted between the ramp holders in front of the bulkhead when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * Single-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyre size: 235/75R17.5 Rsdsq Ra D Ejpfx An Eet ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes and loading ramps * Sideboards painted RAL 9010 pure white * Painting of side walls in other RAL colours available at surcharge ----Notes: * Errors and prior sale reserved * New vehicle with manufacturer's warranty ----Delivery Time: ? Available from CW

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox front right, mounted outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: * Loading length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Bracket in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assists * Steel rear wall, stowable between the ramp mounts, if not in use, on the inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * In the corners, front and rear, each 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and loading ramps * Sideboards painted in RAL 9010 pure white Rodpfx Asrvvfwen Eet * Painting of side walls in any RAL colour available at extra cost ----Information: * Errors and interim sale reserved * New vehicle with manufacturer's warranty ----Delivery time: Available from calendar week ?

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport at the chassis – loading height + 20 mm Redpfx Anepk D Nco Eot * 50 mm softwood floor, clamped version * Pre-fitted device in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal-profiled steel, foldable with drop-side spring-assisted lifting device * Steel rear wall, can be slid in between the ramps – mounting bracket for storage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * In each front and rear corner: 1 x 10 t lashing ring; various holes in front and rear cross members for 1.2 t lashing options * One-piece mechanical grating-type ramps with spring mechanism for one-man operation, approx. 2,750 x 620 mm (can be slid together up to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 * Drop-side panels painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf