Fliegl Priklopnik Z Delovno Ploščadjo nakup rabljenega (43.308)

Stanje: rabljeno, največja dovoljena obremenitev: 14.170 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2006, dolžina tovornega prostora: 6.530 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna masa: 18.000 kg Lastna masa: 3.830 kg Nosilnost: 14.170 kg Skupna dolžina: 8.550 mm Dolžina nakladanja: 6.530 mm Širina: skupna širina 2.550 mm / širina nakladanja 2.540 mm Višina nakladanja: pribl. 1.000 mm Dodatne informacije - Tla iz trdega lesa z Omega profili - Stranske stranice prisotne - Dvojna kolesa - BPW osi - Prstani za privezovanje Pgjdpfxsw N A Eys Anfeu - LED vzvratne luči

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7 Pgedjl Tik Nopfx Anfsu

Stanje: rabljeno, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 05/2018, skupna dolžina: 9.050 mm, skupna širina: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 55 / R22.5, medosna razdalja: 6.850 mm, Splošne informacije Letnik modela: 2026 Konfiguracija osi Dimenzija pnevmatik: 385 / 55 / R22.5 Znamka osi: BPW Zavore: diskovne zavore Vzmetenje: zračno vzmetenje Os 1: maks. obremenitev osi: 9000 kg; profil pnevmatike, leva stran: 30%; profil pnevmatike, desna stran: 30% Os 2: maks. obremenitev osi: 9000 kg; profil pnevmatike, leva stran: 30%; profil pnevmatike, desna stran: 30% Teže Lastna teža: 3.150 kg Nosilnost: 14.850 kg Dovoljena skupna masa: 18.000 kg Funkcionalnost Znamka nadgradnje: Fliegl Vzdrževanje, zgodovina in stanje Število lastnikov: 1 Tehnični pregled (APK): veljaven do 06.2027 Varnost izdelka Proizvajalec: Kuijpers Trading BV, Minosstraat 8, 5048CK, TILBURG, NL Psdpfj Adrx Uox Anfjgu

Stanje: rabljeno, prva registracija: 01/2014, Leto izdelave: 2014, Informacije v nemščini Letnik 2014, teža 2160 kg, delovna višina 17 m, stranski doseg približno 8 m, nosilnost 200 kg, hidravlične opore, 230 V Neto cena: 16.500 EUR, DDV 19 %, bruto cena: 19.635 EUR Pridržana pravica do sprememb in napak! Dodatne informacije Vrsta goriva: električno Področje uporabe: gradbeništvo Delovna višina: 1.700 cm DDV/davčna osnova: odbitljiv DDV Pgjdpfsz Igicsx Anfsu Za dodatne informacije se obrnite na Philipa Müllerja, , p-).----Informacije v angleščini Vrsta goriva: električno Področje uporabe: gradbeništvo Delovna višina: 1.700 cm DDV/davčna osnova: odbitljiv DDV Valuta za najem: EUR Za dodatne informacije se obrnite na Philipa Müllerja, , p-).

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm Pedpfx Aspk D D Hsnfegu * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27,0 Platforma: ----Zavore: * EBS (elektrohidravlični zavorni sistem) * Naprava za sprostitev zavor pri zračnih zavornih cilindrih * Bobnaste zavore ----Osi: Pedpfor Dpzxex Anfegu * 3 x 9 t BPW Eco osi * 1. os je dvigljiva * zadnja os je sledeča krmilna os z elektropnevmatsko blokado krmiljenja preko PIN-a za vožnjo vzvratno (blokada sledeče osi iz kabine za manevriranje – brez vgradnje na tovornjak – omogočena na PIN-u 10 na 15-polnem vtičnicu, samo za manevriranje, ne za uporabo v javnem prometu) ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje z RTR funkcijo ----Elektrika / Osvetlitev: * SmartBoard upravljalna enota kot informacijski sistem z tlačnimi senzorji za prikaz skupne obremenitve osi * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza v kabini tovornjaka preko EBS signala, brez vgradnje na tovornjak * 15-polni vtič * LED zadnje luči * LED rotacijska luč (snemljiva), vključno z nosilcem in montažo * 2 x LED luči za vzvratno vožnjo na zadnji strani vozila (aktivirane preko vzvratne prestave) * Utripajoče LED bočne markerne luči ----Vlečna prikolica / prirobnica vlečne prikolice: * Fiksna središčna vlečna prikolica z 50 mm prirobnico (obremenjena 900 mm, nastavitev višine na zgornji plošči) ----Splošni dodatni deli: * mehanski dvigalnik spredaj, mehanske vrtljive opore zadaj na podvozju * mehansko nastavljiv paket opozorilnih tabel spredaj in zadaj * Orodjarske škatle iz pocinkane jeklene pločevine - črna, prašno barvana - pribl. 650 x 300 x 600 mm, na desni strani ----Nosilna površina: * Stranske stene neprekinjene (brez sredinske prečke) do rampe za nalaganje * Zložljive zadnje prečke * Jeklena zadnja stena vstavljena pred zadnje prečke * 60 mm smrekovo/Douglasovo leseno dno * 400 mm jeklena sprednja stena vstavljena ----Varovanje tovorja: * Z luknjami preboden zunanji okvir, približno pod kotom 45 stopinj, z nosilcem za pritrditev 3 t priveznih obročev * Na vsakem vogalu po 1 x 10 t privezni obroč in dodatno na vsaki strani po 2 x 10 t ter 3 x 6,3 t priveznih obročev * V sprednji in zaključni nosilci različne luknje za pritrditev priveznih pasov (1,2 t) ----Rampe: * hidr. enodelna rampa za nalaganje, pribl. 3.000 x 720 mm, mehansko nastavljiva na strani * 4-polni hidravlični razdelilnik za morebitno dodatno opremo za hidravlično premikanje rampe ----Hidravlika: * Hidr. razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 l/min do 120 l/min) ----Barvanje: * Podvozje, vlečna prikolica, sprednja stena, mehanske podpore zadaj, rampa za nalaganje, zadnja vrata - vročepocinkani * Osi, zračni rezervoar, prirobnica vlečne prikolice in dvigalnik spredaj - črno barvani ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržane ----Čas dobave: takoj na voljo iz Egestorfa

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm Psdpjw U H Sbsfx Anfsgu * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: rabljeno, največja dovoljena obremenitev: 949 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 02/2026, dolžina tovornega prostora: 4.010 mm, širina tovornega prostora: 188 mm, višina nakladalnega prostora: 110 mm, skupna širina: 2.450 mm, skupna višina: 860 mm, A13 GW2616429 Večnamenski transporter 4018, proizvajalec TEMARED, tip DMC, . , Skupna masa: 1300 kg, 400x184 cm, z inercialno zavoro, 100 km/h (opcija), z zložljivo nakladalno rampo (opcija), nizkopodna prikolica, z možnostjo spuščanja podvozja Pgjdsym Igdjpfx Anfeu Višina nakladanja: 400 mm Pridržujemo si pravico do napak in predhodne prodaje.

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf Pedsl Thy Repfx Anfegu

Stanje: rabljeno, prevoženi kilometri: 151.497 km, moč: 107 kW (145,48 KM), prva registracija: 12/2020, vrsta goriva: dizel, skupna masa: 2.945 kg, velikost pnevmatike: 215/65R16C, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, število sedežev: 2, Oprema: ABS, AdBlue, Bluetooth, airbag, centralno zaklepanje, električno upravljanje oken, filter saj, klimatska naprava, računalnik na krovu, registracija vozila, servovolan, start-stop sistem, tempomat, Posebnosti - Klima - nove pnevmatike - krmilni računalnik - električno nastavljanje ogledal - klimatska naprava - elektronska zaščita proti kraji - tempomat - centralno zaklepanje - radio - servo volan - nosilec lestve Konstrukcija Mobilna dvižna platforma France Elevateur 111 Fcc - delovna višina: 10,60 m - največji bočni doseg brez opore: 6,50 m - območje vrtenja stolpa: 400° - največji naklon za uporabo (nagib): 5 % - največji bočni naklon: 15 % - izolirana košara iz polne plastike (1000 V) - dimenzije košare: 850 x 780 x 1150 mm Podpfx Anszm Sagofjgu - nadzorni sistem (daljinski upravljalnik) v kabini (5 m kabla) - kontrolna lučka za transportni položaj v kabini - števec delovnih ur - rezervna črpalka Renault Trafic z mobilno dvižno platformo France Elevateur 111 FCC je vsestransko in zanesljivo vozilo, ki je posebej zasnovano za dela na višini. To vozilo združuje robustnost in udobje Renaulta Trafic z funkcionalnostjo in varnostjo France Elevateur 111 FCC. Platforma je nameščena na krajšem podvožju, zaradi česar je vozilo posebej kompaktno – idealno za uporabo v mestu in na ozkih cestah. Vse funkcije dvižne platforme so delujoče in jih je pregledala naša delavnica. Vozilo je pripravljeno za registracijo. Nemški dokumenti, TÜV in UVV so vključeni brezplačno. Dodatna oprema, kot so prikolica, osvetlitev, police in druga, je na voljo po želji. Na voljo takoj iz skladišča v Langenfeldu! ACR-Juretzki Nutzfahrzeughandels GmbH – vaš zanesljiv partner za rabljena gospodarska vozila Vsa vozila, ki jih ponujamo, so v lasti podjetja ACR-Juretzki Nutzfahrzeughandels GmbH. Predstavitev je izvedena izključno z originalnimi fotografijami, ki so bile posnete neposredno v naših prostorih – tako zagotavljamo popolno preglednost glede dejanskega stanja vozila. Pred prodajo naša vozila opravijo obsežen pregled in popravilo v naši lastni specializirani delavnici – vključno z mehaniko, karoserijo in lakiranjem. Tako so optimalno pripravljena za naslednji tehnični pregled. Poleg tega zagotavljamo pristnost navedenih kilometrov. Zaupanje je dobro – pregled pa še boljši: Po želji lahko vozilo pregledajo neodvisne inšpekcijske organizacije, kot so TÜV, DEKRA ali KÜS – tudi v okviru oddaljenega pregleda. Naša ponudba storitev za vas: Dostava vašega vozila na želeno lokacijo Celotna ureditev izvoznih formalnosti, vključno z izvoznimi registracijskimi tablicami Individualne možnosti financiranja in leasinga Prevzem vašega trenutnega vozila Namestitev dodatne opreme po želji Iščete nekaj posebnega? Če trenutno ne najdete primernega vozila za vaše podjetje v naši ponudbi, se obrnite na nas – z veseljem vam bomo pomagali. Za tehnične podrobnosti, dodatne fotografije ali osebni posvet smo vam na voljo kadar koli. Vse navedene cene so neto cene. Vsebine našega spletnega mesta so bile ustvarjene z največjo skrbnostjo in se redno posodabljajo. Kljub temu služijo izključno kot splošna informacija in ne nadomeščajo individualnega svetovanja. Odločilni so izključno podatki v pogodbi o nakupu. Pridržujemo si pravico do sprememb, napak, tiskarskih napak in prodaje.

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Pgsdpfon Hrtgsx Anfou Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 250 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 06/2018, skupna dolžina: 5.505 mm, skupna širina: 1.299 mm, skupna višina: 2.415 mm, Počiten dvigalo za transport materiala, nosilnost: največ približno 250 kg, višina dviga: največ približno 23,2 m, dovoljena hitrost: največ 48 m/min, zavora za preprečevanje spuščanja, nastavljiva širina osi, oporno kolo, 4 opore, pogon s Honda bencinskim motorjem, tip: GX 390, moč 8,7 kW (12 KM), vozilo se lahko oblepi z reklamami in/ali označi. K2829 Pgedpfx Aez Swh Ssnfsu Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo se lahko oblepi z reklamami in/ali označi. Veljajo naši splošni pogoji dostave in plačila. Z veseljem vam za ta objekt pripravimo ponudbo za financiranje ali lizing. Prosimo, kontaktirajte nas!

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ---Technical Data * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: yes * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ---Chassis / Superstructure * Platform trailer with twistlocks for container transport * Multiple container locks (fixed + extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes * 27 mm birch plywood anti-slip floor * Galvanised omega profiles * Cross member spacing max. 400 mm ---Brake / Safety * EBS brake system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring * 2 air tanks (each approx. 80 L) ---Features * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun protection * Side impact protection * Plastic mudguards (180°) * Mud flaps with "WIESE" logo * Rear folding and extendable access ladder * Rear impact buffers ---Towing Equipment * 18t drawbar (fixed and extendable) * 40 mm drawbar eye * Turntable with slewing ring * Height adjustment available ---Miscellaneous Pgodpsy Euffjfx Anfou * TÜV certificate available * Galvanised chassis * High-quality steel construction * Made in Germany For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 11.400 kg, skupna masa: 15.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11990mm + 800mm x 2480mm x 2900mm Internal dimensions: 9300mm + 800mm x 2380mm x 1875mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system Load-dependent brake force regulator (ALB) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading grids Y-drawbar 40 km/h road approval possible Mudguards Custom paint available !!! ATTENTION – PLEASE READ !!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend inspection and verification to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Psdpfxotw N D Se Anfegu Images are for illustration purposes and may show optional accessories at additional cost. The internal dimensions stated are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE DEALS AND SURCHARGE POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 76.000 kg, skupna masa: 97.000 kg, konfiguracija osi: > 3 osi, prva registracija: 09/2011, z hidravličnim vzmetenjem, osi Panther 12 t, hidromehanska prisilna krmilna naprava, z dvodelno nagibno ploščjo Lastna teža 20.950 kg Nosilnost 76.050 kg Š = 13.900 mm - 21.900 mm Vratni del (swan neck) - Sprednji vogali 45° - Oblikovana tovorna površina 4160 x 2.480 mm - Hidromehanska prisilna krmilna naprava (dvo-krožna krmilna naprava) - Kroglična ležajna sedelna plošča z zamenljivim 3,5-palčnim kraljevskim čepom in nastavljivim vodilnim klinom - Nosilnost sedla 25.000 kg - Polmer izbočenja 2.550 mm Podvozje - Hidravlično vzmeteno 6-osno podvozje, tehnologija osi Panther, neodvisno vzmetenje koles, medosna razdalja 5 x 1500 mm - Osna enota proizvajalca BPW, sestavljena iz neartikulirane osi in pet hidromehanskih prisilno artikuliranih krmilnih osi z maksimalnim kotom krmiljenja 60° - Osi z nastavljivimi stožčastimi ležaji in avtomatskimi nastavljalniki (AGS) - Višina podvozja 850 mm +245 mm/-70 mm Zadnji del vozila - Konstrukcija "poševna za 300 mm" - 2 oporni stolpci na zadnji strani Dvodelna nagibna plošča - 2.850 + 1.540 x 720 mm - Stoječi hidravlični dvižni mehanizem z ročno črpalko, raztegljivost jeklenice - Hidravlična nastavitev nagibne plošče Zavorna naprava - Dvovodno zavorna naprava za vsa kolesa s kompresorjem in membranskimi zavorami - Avtomatska zavora, odvisna od obremenitve (ALB) - Avtomatski nastavljalniki (AGS) - Parkirna zavora s pomočjo cilindrov s pomnilniško vzmetjo - Zavora ABS - Možnost dviganja 3 osi - Električni agregat - Radijski daljinski upravljalnik - Centralna sistem za mazanje "BEKA-MAX" - Izvlečni podaljški, vključno z vložki, podaljšek je teleskopski, do 3.250 mm Tehnični podatki Vratni del (swan neck) Tovorila površina (D x Š) 4160 x 2.480 mm Višina sedla ob natovorjenem stanju 1.290 mm Polmer izbočenja nazaj 2.550 mm Kraljevski čep 3,5" Izvlečna tovorna površina Tovorila površina (D x Š) 11.000 mm x 2.750 mm Izvlečna za 8.000 mm, do 19.000 mm Vključno s poševnino zadaj 300 mm Višina tovorila ob natovorjenem stanju približno 850 mm Podvozje Pjdo Aau N Uspfx Anfsgu Medosna razdalja 5 x 1500 mm Krmiljenje 1. os fiksna 2. - 6. os hidromehansko prisilno krmiljena (dvo-krožna krmilna naprava) Električni agregat Radijski daljinski upravljalnik

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear Pgedpfxsrwc R Rs Anfeu * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards Pgedpfx Anoq Dyvysfsu ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WEB TRAILER PRSH 27 PLATFORM with Hardwood Floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Driving height: 1,280 mm with 1,150 mm fifth wheel height Spring center approx. 1,300 mm Fifth wheel load max. approx. 12,000 kg Axle loads: 24,000 kg Pjdog Dkx Ejpfx Anfegu Approval: CoC documents available Chassis: Chassis made of welded longitudinal beams and through-bolted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the grooves in the outer frame, each rated at 5t!! Landing Gear: 24 t telescopic landing legs from brand manufacturer (Jost/SAF) Axles: Brand manufacturer (SAF/BPW/JOST) 9 t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (option) Axle spacing approx. 1,310/1,310 mm Brakes: EBS braking system by Knorr or Wabco Air connections with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve (Knorr/Wabco) Air tanks 2 x approx. 80 l Tire pressure monitoring Lighting system: LED 15-pin front connection Flashing side marker lights Tyres: Premium brand tyres 385/65 R 22.5 on steel rims Bodywork: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted construction Floor: Weatherproof 28 mm hardwood floor alternately with galvanized omega steel profiles Hardwood planks bolted onto cross-members (optional double bolting) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium, large, and edged rear lamp bracket Welded underrun protection (rectangular tubing) Rear access ladder, right side, foldable and extendable with platform Two wheel chocks with holders, plastic or galvanized Plastic mudguards 180° over each axle Side underrun protection on both sides — aluminum or plastic profile Coating: Chassis painted in RAL 9005 or Novagrey 7350 Other colors at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Ex-works price Attention!!! Pictures show special equipment. Get professional advice and a free, non-binding offer. Leasing, financing, or hire purchase available! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Subject to prior sale and errors!

Stanje: rabljeno, največja dovoljena obremenitev: 9.000 kg, skupna masa: 11.600 kg, konfiguracija osi: 2 osi, prva registracija: 04/2022, naslednji pregled (TÜV): 05/2028, dolžina tovornega prostora: 6.409 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.740 mm, skupna dolžina: 9.820 mm, skupna širina: 2.480 mm, skupna višina: 2.900 mm, Metal-Fach T014/2 prikolica za bale Prikolica z dvema osjema in ravno platformo Prikolica za bale Prikolica s platformo Odobrena za 40 km/h 1. lastnik Datum prve registracije: 14.04.2022 Tehnični pregled: 05/2028 Zunanje mere: 9089 + 800 mm x 2480 mm x 2900 mm Notranje mere (približno): 6409 + 800 mm x 2340 mm x 1740 mm Višina nakladalne površine: 1150 mm Skupna masa: 11600 kg Lastna teža: 2600 kg Nosilnost: 9000 kg Pnevmatike: 500/50-17 145A8 Široke pnevmatike Razširljiva nakladalna površina Zračno zavorno sistema ALB-regulator Stranski zaščitni odbijač Stranska osvetlitev Parabolična vzmetna sistem Parkirna zavora Nakladalna mreža, nastavljiva spredaj in zadaj Y-priklopna naprava Blatniki POZOR !!!!! OBVEZNO PREBERITE !!!!! Izrecno si pridržujemo pravico do predčasne prodaje, saj ta artikel ponujamo tudi na drugih portalih. Priporočamo ogled in pregled, da se izognemo morebitnim napačnim predstavam o stanju in primernosti pri kupcu. Ogledi in pregledi so možni kadarkoli po dogovoru in so izrecno zaželeni!!! Slike so podobne, lahko vsebujejo dodatno opremo, ki je predmet doplačila. Navedene notranje mere so približne. MOŽNOSTI ZA VZETJE STAREGA VOZILA V DELNO PLAČILO, skoraj za vse!!! MOŽNOSTI ZA IZMENJAVO IN PLAČILO NA OBROKE!!! Razstavni prostor: 58285 Gevelsberg, Am Sinnerhoop 17 Odprto: ponedeljek – petek od 9.00 do 17.00, sobota od 9.00 do 14.00 Vedno več kot 500 novih in rabljenih prikolice na zalogi!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: Pgsdjz E Ui Sepfx Anfeu

Stanje: novo, lastna masa: 4.400 kg, največja dovoljena obremenitev: 19.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 8.795 mm, Oprema: ABS, | Krone AD Jumbo plato prikolica 3-osna Nova | Multilock zunanji okvir po celotni dolžini | Zračno vzmetenje spredaj in zadaj (dviganje/spuščanje) | Vrtljivo podvozje z krožno kroglo, nizko vzdrževalni vrtljivi venec | Vlečna ušesa 40 mm | BPW osi z bobnastimi zavorami | Nosilec za rezervno kolo | Dimenzije (D x Š x V): 8,60 x 2,48 x 0,93 m | Jeklena čelna stena 1,60 m | Medosna razdalja: 8.795 mm | Pnevmatike 12x spredaj/zadaj: 235/75 R 17,5 | Pridržujemo si pravico do napak, vnosov in predhodne prodaje. Pgjdpfoy H Ilzex Anfeu

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26MG00273 Prevoznik gradbenih strojev, proizvajalec A, tip BMAT, skupna teža: 3.500 kg, nizkopodni priklopnik, s inercijsko zavoro, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in predhodne prodaje. Pedoym Ihzopfx Anfegu

Stanje: pripravljen za uporabo (rabljen), lastna masa: 11.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2006, naslednji pregled (TÜV): 02/2027, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, Leto izdelave: 2006, Oprema: dvižna zadnja plošča, Trivozna prikolica z hidravlično dvižno rampo. Pgedpfx Ano Aawvkefju

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: Pgodpfspk D Dqsx Anfou * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2016, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 12.000 mm, skupna širina: 2.550 mm, Dodatne informacije: - 3. os s prisilnim krmiljenjem - višina tovornega prostora znotraj približno 3.150 mm - dvojne pnevmatike 215/75R17,5 - osi BPW - zračna vzmet - drsna ponjava Vozilo je lahko opremljeno z reklamami, napisane informacije ali pa vsebuje ostanke napisov. Na voljo več enot. Psdpoz Dzw Tsfx Anfegu

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT23201013029, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.540 mm, skupna dolžina: 14.500 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Leto izdelave: 2026, Pozor, arhivske slike! Dvopolna, nizkotlačna prikolica Tip SZS 300, specializirana za transport tovornih vozil #Podvozje nizkotlačne prikolice Jeklena, varjena konstrukcija, sedelna plošča z zamenljivo 2-palčno kraljevo glavo, nizka ploščad od področja koles do gosičnega vratu, nagnjena za približno 210 mm višine tovornega prostora, zadnji del do področja koles nagnjen, ležalna letva za aluminijaste rampe na zadnji strani, po celotni širini 2 klini za podložke z nosilcem Zaščita koles z pocinkano jekleno pločevino, odstranljiva 1 vlečna ušesa na zadnji strani, 10 ton Rezervno kolo z nosilcem na čelni steni/predal zunanji del spredaj 1 predal iz jekla na gosičnem vratu spredaj, prečno, približno: D = 2400 mm, Š = 400 mm, V = 600 mm, z zaklepanjem Električni vitel, 24 voltov, vlečna sila 8165 kg, nameščen spredaj na gosičnem vratu za predalom, na tovorno površino, upravljanje z radijskim daljinskim upravljalnikom, dolžina vrvi 35 m x približno 10 mm, z valjčno vodilno napravo in 2 odstranljivima vodilnima valjčkoma na gosičnem vratu in zadnji nagnjeni plošči, vključno z vtičnico NATO na priključni plošči 1 par jarkov za kolesa, približno 700 mm, začne se na gosičnem vratu, vgrajen v pod Opomba: Glavni okvir je približno 145 mm nad tlemi 4 pari vtičnih mest za opore za kolesa (Fliegl standard), brez opor za kolesa Dodatek za parkiranje prikolice, približno 100 mm visoka in približno 100 mm dolga 2 kosa opor za kolesa, vtična Priprava za dodatke jarka za kolesa #Opora za pritrditev tovora, nizkotlačna prikolica 2 para 2,5-tonske opore za pritrditev tovora na gosičnem vratu 7 parov opornih točk zgoraj in ob strani v zunanjem okvirju, vgrajenih, 10 ton na vsaki Pedpozy Hwysfx Anfsgu 4 pari 10-tonske opore za pritrditev tovora, vgrajene zgoraj v vzdolžnem nosilcu, glavni okvir 1 vijak za pritrditev tovora s 6,7 tone (JDT), zadaj na sredini, v predalu za rampe 1 zložljiva opora za pritrditev tovora, dodatno spredaj na nizki ploščadi, 10 ton #Osi + vzmetenje SAF- os z bobnovimi zavorami, vzmetenje na zračni blazini z ventilom za dvigovanje in spuščanje #Kolesa in pnevmatike 235 / 75 R 17,5" Jeklena platišča, dvojna konfiguracija, tovarniška srebrna barva #Zavorna sistem Dvodovodna zavorna napeljava na stisnjen zrak Zavora s pomnilnikom vzmetne sile 2 vtičnice, ki se ne morejo zamenjati, spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Pozor: Prikolico lahko vlečejo samo vlečna vozila, ki zagotavljajo delovanje ABS! #Elektrika 24 voltov, večkomorne luči z LED in uporom, stranska rumena LED osvetlitev, osvetlitev registrskih tablic z LED 2 beli/rdeči luči za bočno osvetlitev, zadaj z LED 2 x 7-polne in 1 x 15-polna vtičnica, ki se ne more zamenjati, spredaj, brez povezovalnega kabla 2 beli gabaritni luči spredaj z LED 1 LED rotacijska luč z nosilcem 1 dodatna LED delovna luč, zadaj 2 dodatni LED delovni luči, integrirani v gosični vrat, za osvetlitev tovornega prostora #Pod Gosični vrat z jekleno/profilirano jekleno površino Nizkotlačna površina, jeklena luknjasta pločevina, v področju jarkov za kolesa jeklena/profilirana jeklena površina in v področju blatnikov odstranljiva jeklena pločevina Zadnji nagnjeni del z jekleno luknjasto pločevino #Stranske stene Aluminij, 320 mm visoke, stransko na gosičnem vratu, vtične, približno 2500 mm dolge Zadnja stena iz aluminija, 320 mm visoka, na gosičnem vratu, vtična #Nakladalne rampe 1 par aluminijastih rampe, nosilnost največ 12.000 kg na par, dolžina približn