Fliegl Sds 390 Fahrgestell Für Nachträglichen Tankaufbau nakup rabljenega (3.226)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin and two kingpin positions, 24 t two-speed landing gear, single-sided operation, with straight lower section, without load compensation Rear support foldable 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Mudguards in front of the 1st axle and behind each axle with antispray, compliant with EC regulations Extendable widenings to 3,000 mm (not in rear slope) Storage compartment for timber planks in the centre of the loading area 70 mm timber planks for extension to 3,000 mm Lashing Points Low-bed 2 pairs of ring lashing eyes each rated for 5 t at the front on the gooseneck 11 pairs of lashing mushrooms embedded on the top and side of the outer frame, each rated for 10 t 2 x on gooseneck 9 x distributed on the low-bed deck First lashing point 250 mm from the front and last one max. 250 mm from the rear, distance between lashing points not greater than 1,100 mm 8 pairs of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) Axles + Suspension SAF drum brake axles Air suspension Wheels and Tyres 235 / 75 R 17.5 Steel rims, twin arrangement, factory silver Braking System 2-line compressed-air braking system Coloured hose arrangement for easy servicing Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 anti-mistake couplings at the front, without connection line With lift & lower valve Axle load detection via EBS-Canbus signal, for display in the driver’s cab Vehicle stability control system Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-mistake sockets at the front, without connecting cable 1 LED beacon with holder 2 pairs of double warning boards, LED lit and extendable to 3,000 mm Floor Gooseneck with steel plate covering Storage box fitted into the ramp to gooseneck Then 70 mm softwood flooring, in wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood flooring Low-bed area including rear slope: 9,200 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber planked Hydraulic operation via tractor auxiliary drive with throttle, operation on left side in driving direction Hydraulic connection with SVK coupling NW 10/3, without connection hoses Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Rodpfsi Ri E Rex Alzocd

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Rjdpei Ri Hcsfx Alzecd Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.830 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.750 mm, prostornina tovornega prostora: 41 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized individually to the customer's specifications. Further information Chassis: Tipper semi-trailer Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2-inch kingpin Patented curved front panel 24-ton, 2-speed landing gear, single-sided operation, with straight base, without compensator 2 wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin support rod with bracket 2 towing hooks at rear Axles & Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment for reduced tire wear and lower fuel consumption Axles in off-road version Air suspension 1st axle automatic lifting axle, including forced lowering and traction aid, operated by braking 3 times (traction aid active up to 30% axle load exceedance and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system with color-coded lines for easier servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line Rcedpfxji Ri Efo Alzed EBS (Electronic Braking System) with EBS socket at front, no connection cable Note: The trailer may only be towed by tractor units that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, tire brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 volts, multi-chamber rear lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls from 30 mm hollow-chamber profiles, clean welded, with a bulk material-repelling upper rail profile. Interior with step access at the front wall (not in combination with Cramaro). Shovel and broom holder outside on front wall. Greenline - conical and aerodynamic body shape Membrane tailgate Tailgate suspended with double-joint hinges and two-leaf division 1/2 to 1/2, top with swing arm, each leaf with a grain chute. Tailgate with rubber seal. Note: Heat resistant up to max. 170°C! Continuous 6 mm thick floor Standing platform with access ladder, connection plate for air/electricity and brakes with ample free space for optimal operability. Roll-over tarpaulin stowed on right side (FR-right), with central locking on left side (FR-left).

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.900 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 38 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to match your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front panel Central telescopic support leg, uncoupling when loaded is not possible, in uncoupled state the vehicle must stand with a slope to the rear. 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 rear towing hooks Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activation: brake 3 times Redpsi Riz Refx Alzecd Hot-dip galvanized lift axle mechanism, 10 years warranty against corrosion perforation Braking System 2-line air brake system with color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable couplings at front EBS (Electronic Brake System) with EBS socket at front With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, manufacturer at manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane indicator lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping Body Aluminum box-type body made of premium-grade, wear-resistant alloy; 5 mm thick front wall, outer side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail profile. Interior with access steps on front wall (not in combination with Cramaro). Shovel and broom holder mounted outside on front wall. Greenline - conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double hinge, external mounting and dual hook locking. Rear wall with rubber seal – Note: heat resistant up to max. 170°C! Continuous 6 mm floor plate Standing platform with climb, connection plate for air/electrics and brakes, large clearance for optimal usability. Roll tarp stored on passenger side, central locking on driver side Paintwork Frame finished in DB 7350 Novagrau gray 10 years Tailored Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually realized to customer demand.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 01/2014, dolžina tovornega prostora: 13.660 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.810 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 50 odstotek, medosna razdalja: 9.000 mm, barva: drugo, Leto izdelave: 2014, Oprema: ABS, = Dodatne možnosti in dodatna oprema = Drugo - Os BPW - Dvignjena os - Zračna vzmetenje Drugo - Diskovne zavore = Dodatne informacije = Konfiguracija osi Rcsdpfx Aezhlpkslzsd Velikost pnevmatik: 385/65 Znamka osi: BPW Zadnja os 1: Največja obremenitev osi: 9000 kg; Globina profila pnevmatike: 50 % Zadnja os 2: Največja obremenitev osi: 9000 kg; Globina profila pnevmatike: 40 % Zadnja os 3: Največja obremenitev osi: 9000 kg; Globina profila pnevmatike: 40 % Teže Lastna teža: 5.880 kg Nosilnost: 33.120 kg Največja dovoljena masa: 39.000 kg Vzdrževanje Tehnični pregled: veljaven do 03.2027 Identifikacija Registrska številka: ON-68-FS

Stanje: rabljeno, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2021, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Jeklena zadnja kiparska keson cisterna približno 50 m³, kombinirana zadnja vrata z dvojnimi krilnimi vrati z vrtečim zapahom / nihajna loputa, 2 x žitna drsnika, samodejno-mehanska 4-kaveljska zapora, HYVA kiper cilindri, rolo ponjava, podporniki, ABS, EBS, SAF INTRA CD os(i), kolutne zavore, dvižna os, zračno vzmetenje z dvižno-spuščalno napravo, stikalo za vklop/izklop za spuščanje kiperja, vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. SI86095 Naša ponudba je načeloma brez novega tehničnega pregleda. Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. Veljajo naši splošni pogoji dobave in plačila. Z veseljem vam pripravimo ponudbo financiranja ali leasinga za ta predmet. Prosimo, kontaktirajte nas! Rcsdpfx Alsw Ertgszod

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Rodpfsza Aiyjx Alzocd Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Rcodpfxoza Agrs Alzod Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035478, lastna masa: 4.660 kg, največja dovoljena obremenitev: 33.340 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.450 mm, skupna širina: 2.550 mm, skupna višina: 1.325 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis Semi Container Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin and two kingpin positions Front locking on tipper ram mounting bracket with positioning wedges on both sides; rear locking via continuous rotary shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossbeams, dual, for securing 1 x 30 ft container Rodpfxezaz Tke Alzjcd 24 t, two-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Free landing gear foot spacing or rear swing clearance approx. 1850 mm 2 wheel chocks with holders Side underrun protection, aluminum Without rear underrun protection Half-shell mudguards With anti-spray flaps according to EC standard Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection). Note: Tipping angle limited! Operated hydraulically via truck PTO Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles & Suspension BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser-measured" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (intermodal transport) up to 44 t gross combination weight Air suspension 1st axle automatic lift axle, including forced lowering and drive-off aid, operation via "3x braking" (Drive-off aid is functional up to an axle overload of 30% and up to max. speed of 25 km/h) Brake system 2-line compressed air brake system Color-coded pipe routing for easy service Spring-actuated parking brake 2 error-proof coupling heads at the front, without connecting line 24 volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift and lower valve Vehicle stability control system Axle load detection via EBS CAN-bus signal, for display in the driver's cab. Truck must be appropriately prepared, no truck installation (not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin error-proof sockets at front, without connecting cable Registration country / License plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at sides, red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Landing gear: black coated

Stanje: rabljeno, največja dovoljena obremenitev: 28.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.300 mm, prostornina tovornega prostora: 24 m³, Leto izdelave: 2020, Oprema: ABS, Zrak, dvig, BPW-disk, EBS, PVC polovični blatniki, sredinsko oporni pad, aluminijasta platišča, zložljiv UFS, termoizolacija, naležna zadnja stena, pohodna steza z lestvijo, PVC zadnja ponjava, PVC rolo ponjava. Rcjdoy Dy Agopfx Alzed

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2011, skupna dolžina: 12.100 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, medosna razdalja: 9.250 mm, barva: drugo, Leto izdelave: 2011, = Additional options and accessories = - EBS = Remarks = Number of axles: 3, Payload: 36,200 kg, Unladen weight: 5,800 kg, Gross weight: 42,000 kg, Type of chassis: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2x 20, 1x 30, 1x 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further information = General information Cab: Day cab Registration number: OL-43-HP Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre size: 385/55R22.5; Lift axle; Tyre tread left: 5 mm; Tyre tread right: 10 mm Axle 2: Tyre size: 385/55R22.5; Tyre tread left: 8 mm; Tyre tread right: 10 mm Axle 3: Tyre size: 385/65R22.5; Tyre tread left: 2 mm; Tyre tread right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Condition General condition: Very poor Technical condition: Very poor Visual condition: Very poor Damages: None = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Honest business practices • Multilingual staff • We understand our customers • Import & transport services • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Redpey U U R Hjfx Alzscd Ask us directly about our European warranty packages.

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Dvižna os * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna masa: 6.067 kg * TÜV & SP: potekel -----Pridržujemo si pravico do napak in vmesne prodaje Številka vozila 5726 WhatsApp podpora na voljo! Za vprašanja glede vozila ali dodatne informacije nam pišite preko WhatsAppa Whatsapp Redpfxsvhvcfs Alzscd Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna teža: 6.097 kg * TÜV & SP: potekel -----Napake in vmesna prodaja pridržane Številka vozila 5732 Podpora prek WhatsApp na voljo! Rcedpfx Alsvhv H Rszod Za vprašanja glede vozila ali dodatne informacije nas preprosto kontaktirajte prek WhatsApp

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2005, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Opombe = 3-osna nizkopodnožna polprikolica, prevozna. Sedežna platforma z vstopnim naklonom cca 4.000 x 2.500 mm, nizkopodnožna platforma cca 9.200 x 2.500 mm. Višina nakladanja cca 920 mm. 44 vpenjalnih ušes in obročev. Dvodelni hidravlični rampi cca 2.150+1.250 x 630 mm. BPW osi, ABS, zračno vzmetenje. Dovoljena skupna masa 41.000 kg, sedlasta obremenitev 11.000 kg, nosilnost 32.100 kg. Kraljevski zatič 2 cola, sedežna višina cca 1.050 mm. 4 zaboji za orodje. Pnevmatike 235-75R17.5. Dvocevni zračni sistem, hidravlična enota. Barva bela. Rcedjyaxnfopfx Alzed = Dodatne informacije = Lastna masa: 8.900 kg Nosilnost: 32.100 kg Skupna masa: 41.000 kg Pnevmatike spredaj: 235-75 R 17.5 Pnevmatike zadaj: 235-75 R 17.5 Za več informacij kontaktirajte Jan-Marc Schwickerta.

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface Rodpfxevhyf Rs Alzecd - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 35.000 kg / 48.000 kg Lastna masa: 9.950 kg Nosilnost: 25.050 kg / 38.050 kg Skupna dolžina: 21.000 mm Dolžina nakladalne površine: notranja dolžina ca. 13.500 mm / največja dolžina nakladalne površine 21.000 mm Širina: 2.550 mm Višina nakladalne površine: 950 mm Dodatne informacije Novo vozilo iz tekoče proizvodnje, kmalu na voljo Teleskopska zadnja podpora 4 zagozde za podlaganje koles z nosilcem 4 para spuščajočih kontejnerskih zapor v dnu za 1x 40 ft. kontejner ali 2x 20 ft. kontejnerja 1 nosilec rezervnega kolesa za 1 rezervno kolo, z garnituro za pritrditev, v košarici 11 parov žepov za stranice v zunanjem okvirju, primerni za FR-vložne stranice 80x50 mm, vgrajeni poravnano z zunanjim okvirjem, z odprtino za pritrditev pasu ali verige 20 kosov natakljivih stranic B=80 / G=50 / D=1500 mm 1 plastična orodjarna 3 para priveznih ušes po 3,5 t, vgrajenih v stranski okvir – v predelu vratu 13 parov zložljivih priveznih obročev po 10.000 daN, prostoviseče obešenih v profilu stranskega okvirja (primerni tudi za prekomerno široko privezovanje) 1 par zložljivih priveznih obročev po 10.000 daN, vgrajenih ob strani na vmesni podpori Zračno vzmetenje z možnostjo dviga in spuščanja 1. os samodejna dvižna os, dodatno prisilno spuščanje, vključno s pripomočkom za speljevanje z gumbom za upravljanje na polpriklopniku, brez upravljanja iz kabine voznika z ventilom za dvig in spust + funkcija samodejne ponastavitve Kolesa in pnevmatike 235/75 R 17,5" jekleni platišči v dvojni izvedbi, tovarniško srebrni 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 sprednji beli pozicijski LED luči 2 zadnji LED luči za označevanje sledi (belo/rdeče) 2 x 7-polna in 1 x 15-polna varnostna vtičnica spredaj, brez priključnega kabla 2 dodatna LED delovna žarometa zadaj, vklop preko vzratne luči 1 odstranljiva opozorilna luč na zaščiti proti podrsu 1 x 7-polna vtičnica zadaj 6 stranskih vtičnic: 2x sprednja stena, 2x podporna noga, 2x zadnji konec (levo + desno), 7-polni 2 delovna žarometa, zgoraj vgrajena v sprednjo steno, vključno s stikalom 2 para table za označevanje prekomerne širine, vsaka s po 2 LED pozicijski lučki na tablo, stransko raztegljive do 3.500 mm, table dodatno nastavljive na nakladalno površino (prilagoditev širine brezstopenjsko) Fiksna jeklena sprednja stena, višina 1.200 mm, z robustnimi jeklenimi vogalnimi stebri brez poševnine v kotih, stransko ravna izvedba 2 luknji za privez zgoraj noter in zunaj v zgornjih kotih sprednje stene Prednji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Zadnji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Sprednja stena RAL 3002 karminsko rdeča Rcedpfeumha Nox Alzjd

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni polnizkopodni priklopnik z rampami Tip SDS 470 T Rjdpfjk N Aflsx Alzjcd Skupna masa 41.000 kg / 47.000 kg Lastna teža 8.900 kg Nosilnost 32.100 kg / 38.100 kg Skupna dolžina 13.300 mm Nakladalna površina 9.200 mm Rampi 3.000 mm x 750 mm s hidravličnim upravljanjem Zračno vzmetenje z ventili za dviganje in spuščanje Izrez za roko bagra Velik komplet za pritrjevanje tovora Lesena tla 70 mm SAF osi, tretja os kot sledilno krmiljena os Ponudba leasinga: doba trajanja 48 mesecev, 40% preostala vrednost, predplačilo samo DDV. Mesečna rata EUR 999,00 (plačljivo samo neto)

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2013, Oprema: ABS, Fliegl Schubboden Walking Floor Rsdpfjqk Tf Tjx Alzocd * First registration: 22.05.2013 * 3 axles * 92 cubic meters * 1st axle lift axle * 1 owner * German trailer * Unladen weight: 7,525 kg * Permissible total weight: 35,000 kg * SDS 350 * Tyres: * 1st axle 385/55 R 22.5 left 5 mm & right 8 mm * 2nd axle 385/55 R 22.5 left middle 10 mm & right middle 9 mm * 3rd axle 385/55 R 22.5 left rear 5 mm & right rear 8 mm * All information without guarantee * HU/SP (German MOT) will be renewed before sale Additional services and criteria on request: * Repainting and retrofitting possible * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documentation * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible * In-house workshop * We speak Polish, English and Russian Repainting in your desired color available in our facility at a reasonable price and high quality. Are you located further away and unable to inspect the truck on site? No problem. You are welcome to appoint an independent expert of your choice to inspect the truck both technically and visually. Should any defects unexpectedly occur, we can quickly and efficiently rectify them in our workshop. Additionally, we can deliver your new used vehicle throughout Europe for an additional fee.

Stanje: rabljeno, Leto izdelave: 2020, FLIEGL SDS350 15 metrov X-TRA DOLGA RAVNA kontejnerska šasija za 2 izmenljivi nadgradnji ali 2 kontejnerja !EKSTRA DOLG! !! Dolžina 14,85 m!! • Pripravljeno za 2 x 7,45 m nadgradnji • ali 2 x 20-ft kontejnerja • ravno šasijo • 3 x SAF zračno vzmetene osi, vsaka 8 t • Dvigalo/spuščanje • ABS • ASR Mere in teža vozila: • Dovoljena skupna masa: 35.000 kg • Lastna teža: 4.100 kg • Mere: 14.850 x 2.550 x 1.200 mm • Pnevmatske gume: 385/55 R22.5 • Globina profila: 13/13/11/12/12/9 mm - zelo dobro stanje, skoraj ni bil v uporabi! - Tehnični pregled / HU / SP: NOVO! Rcodpfxswtbvto Alzsd - SP: 01/26 - Nemška polprikolica! - Prvi lastnik Pridržujemo si pravico do napak in vmesne prodaje! = Dodatne informacije = Letnik: 2020 Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2005, barva: drugo, Leto izdelave: 2005, Os 1: leva 4-8 mm desna 10-10 mm Rsdpfx Alsywtcyszscd Os 2: leva 10-10 mm desna 12-12 mm Os 3: leva 4-8 mm desna 4-4 mm Možna je zlaganje prikolic! = Več informacij = Lastna teža: 4.200 kg

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 4.600 kg, Dodatne informacije Okvir Jeklena varjena konstrukcija iz finega zrnatega jekla, vroče pocinkana, ravna platforma brez dvignjenega roba, poševnina nakladalne površine za zadnjo osjo približno 8° navzdol. Vzdolžni nosilci iz jeklenih profilov, jekleni okvir vroče pocinkan, z NIRO-pločevino ob pregibu kot vodilo za vrv—poravnano s tlemi. Za tovornjak s testo osi: 2. os 1.795 mm / 2. do tretje osi 4.105 mm, tretje do četrte osi 1.350 mm. Vlečna kljuka Vlečna kljuka s kroglično glavo D24,8: (višina od tal do zgornjega roba cca. 480 mm), priklopna obremenitev 2.800 kg, vključno z montažo in elektriko s 7-polno vtičnico. Rsdek Unitepfx Alzscd Dodatna oprema/Predelave 2 držala za zagozde, bočna zaščita iz aluminija, zložljiva – prevzeta s tovornjaka! Zadnja zaščita iz jekla, četrtinske blatnične školjke z blatniki – prevzeto s tovornjaka! Skladiščne škatle Plastična škatla za orodje s predalom in notranjo polico, š=650/v=520/g=670 mm, zaklepanje z obešanko. 1 nosilec za 3 kante za bencin 1 skladiščna škatla iz nerjavečega jekla, š=600/v=400/g=500 mm, z visokosijajnimi vrati, zaklepanje vključeno, vsebuje krmilni ventil in elektrohidravlični črpalni agregat. Nadzorna omarica z obodno tesnilno gumo in tiščali na zadnji strani. Elektrika Prilagoditev obstoječih zadnjih luči, 2 dodatni LED delovni žarometi, vdelani v čelno steno, stikalo na zunanji strani čelne stene levo, 1 LED delovni reflektor, na zadnji strani, z integrirano kamero za vzvratno vožnjo, vključno z barvnim ravnim monitorjem, zaslon z vakuumskim nosilcem in napajanjem 24V, napetostni pretvornik 24/12V, 1 vtičnica 7-polna 12V = vtični adapter. Tla Mega Grip iz nazobčanega pocinkanega rešetkastega jekla, jeklene rešetke 50/4, s širino mreže 50 mm. Zgornja površina z nazobčano zaščito proti zdrsu, nadaljuje se čez celo glavno okvirno platformo. Pritrdilne točke 12 parov obročev za pritrdilne verige na zunanjem okviru, prosto vrtljivi – vsak po 10 ton. 1 spredaj in 1 zadaj na koncu. 1 obroč na sredini zadnjega dela za pritrditev vlečne žice vitla. 12 pritrdilnih ušes vgrajenih na sredini tal, vsak po 5 ton. Čelna stena Čelna stena iz jeklene pločevine, višina 1.500 mm. Fiksna s kotnimi stebri v višini sprednje stene. Po 12 držal na levo in desno stran za obešanje verig montirani na čelni steni. Vitlo Električno vitlo, 24 V, vlečna sila cca. 6.350 kg, nameščeno sredinsko pri čelni steni (vgrajeno v nakladalni oder), upravljanje z daljinskim upravljalnikom, dolžina vrvi najmanj 35 m x 9,5 mm, z valjastim vodilom, tlačna plošča za vrv, vključno z zaščito pred preobremenitvijo, prosta sklopka, ročno stikalo s ca. 5 m krmilno ročico, homologacija vitla, poročilo civilnega inženirja, kontrolna knjiga, navodila za uporabo. Nakladalne rampe Dolžina 3.500 mm – dvodelne (2.000 mm + 1.500 mm), širina 850 mm, nosilnost 20.000 kg / par (tudi pri nakladanju po rampi), elektrohidravlično zložljive in stransko pomične – vključno z elektrohidravličnim črpalnim agregatom. Nakladalni kot približno 8° pri spuščeni zadnji osi, podlaga za rampo iz vroče pocinkanih jeklenih rešetk s protivpadno nazobčanostjo. Rampe se zložijo na približno 170 mm, podaljševanje ramp hidravlično. Rampa pripravljena za uporabo na nakladalni rampi z polno nosilnostjo. Zavarovanje rampe z 2 napenjalnima trakovoma. Konica rampe spuščena, primerna za uporabo na nakladalnih rampah. Označevanje upravljanja ramp. Spuščanje rampe z zavoro ventila. Podpore Nastavljive podporne noge, zadaj zložljive in po dolžini nastavljive.

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 4.100 kg, Dodatne informacije Okvir Jeklena varjena konstrukcija iz drobnozrnatega jekla, vroče pocinkana, ravna platforma brez robne povišave, naklon nakladalne površine za zadnjo osjo cca. 8° navzdol. Vzdolžni nosilci iz jeklenih profilov, jekleni okvir vroče pocinkan, z NIRO-pločevino na pregibu kot vodilo za vrv – poravnano s tlemi. Za tovornjak z medosno razdaljo: 2. os 5.100 mm / 2. do 3. os 1.350 mm Vlečna kljuka Vlečna kljuka s kroglasto glavo D24,8, vlečna nosilnost 2.800 kg, vključno z montažo in elektriko s 7-polnim vtičem. Dodatna oprema/predelave 2 nosilca za zagozde, bočna zaščita iz aluminija, zložljiva – prevzeto s tovornjaka! Zaščita proti podvozu iz jekla, blatniki s četrtino školjke in blatnimi loputami – prevzeto s tovornjaka! Predal za orodje Plastična omara za orodje s predalom in polico, š=650 / v=520 / g=670 mm, zaklepanje z obešanko (ključavnica ni priložena). 1 nosilec za 3 kante za gorivo. 1 nerjaveča omara, š=600/v=400/g=500 mm, s polirano vrati in zaklepanjem, vsebuje krmilni ventil in elektrohidravlično črpalko. Krmilna omarica z okroglo tesnilno letvijo na vratih in tesnilnimi manšetami na zadnji strani (zaščita pred pršenjem vode po tehničnih možnostih). Elektrika Prilagoditev obstoječih zadnjih luči, 2 dodatna LED delovna žarometa, vgrajena v prednjo steno in delujeta prek stikala na levi strani prednje stene s položajem na pozicijskih lučeh, 1 LED delovni žaromet zadaj z integrirano vzvratno kamero, vključno z barvnim ravnim monitorjem, zaslonom z nosilcem na prisesek in napajanjem prek 24 V, napetostni razdelilnik 24/12V, 1 vtičnica 7-polna 12V = adapter. Talna površina Mega Grip iz zobatih pocinkanih rešetk, jeklene rešetke 50/4 z mrežo 50 mm, zgornja stran z nedrsečim profilom, položeno po celotni glavni platformi. Privezne točke 12 parov vrtljivih priveznih obročev v zunanjem okviru – vsak po 10 t. 1 naprej in zadnji povsem zadaj. 1 točka v sredini zadaj za pritrditev viteljske vrvi. 12 priveznih točk vgrajenih v sredini tal – vsaka 5 t. Prednja stena Prednja stena iz jeklene pločevine, višina 1.500 mm. Fiksna z vogalnimi stebri (višina sprednje stene). Na levi in desni strani vsak po 12 obešalnih kavljev za verige. Vitel Električni vitel, 24 V, vlečna sila ca. 6.350 kg, nameščen centralno ob prednji steni, upravljanje z brezžičnim daljincem, dolžina vrvi min. 35 m x 9,5 mm, z navojnim vodilom, s pritiskalno ploščo, vključno z zaščito proti preobremenitvi, prosto prestavno sklopko, ročni daljinski upravljalnik z približno 5 m kabelsko ročico, izjava o skladnosti, inženirsko poročilo, servisna knjižica, uporabniška navodila. Rampi za nalaganje Dolžina 3.500 mm – dvodelna (2.000 mm + 1.500 mm), širina 850 mm, nosilnost 20.000 kg / par, elektrohidravlično zložljiva in bočno pomična – vključno z elektrohidravlično črpalko. Nagib za nalaganje ca. 8° pri spuščeni zadnji osi. Podlaga ramp iz vroče pocinkanih jeklenih rešetk z nedrsečim profilom. Rampi možni premik do cca. 170 mm, hidravlični razteg ramp. Pripravljeno za uporabo s polno nosilnostjo na nakladalni rampi. Zaklepanje ramp z dvema pritrdilnima trakovoma. Konica rampe znižana (nos min. 150 mm) za uporabo na nakladalnih rampah. Oznake za upravljanje ramp. Ventil za spust rampe. Rcjdpfx Aloi Riytezed Podpore Nastavljive podporne noge, zadaj zložljive in nastavljive po dolžini, ojačana izvedba (tekst se tu zaradi dolžine zaključi, lahko nadaljujem ob potrebi)

Stanje: rabljeno, največja dovoljena obremenitev: 2.540 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 6.220 mm, širina tovornega prostora: 2.470 mm, skupna širina: 2.495 mm, skupna višina: 630 mm, Humbaur HN 356225 Low Loader Chassis Container Trailer 3.5t Car Tandem Trailer Low loader Chassis for transporting 20-foot BDF container systems. WC sanitary trailer First registration: 19.03.2025 MOT: 03-2027 Gross vehicle weight: 3,500 kg Unladen weight: 960 kg Payload: 2,540 kg Loading height: 630 mm Overall dimensions: 7,850 mm x 2,495 mm Internal dimensions: 6,220 x 2,470 x 0 mm 100 km/h permissible Galvanized chassis 8x BDF quick-release locks Overrun brake Comfort automatic jockey wheel VAT deductible! Rcjdpfswicfusx Alzod ATTENTION! PLEASE READ! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend viewing and inspection to avoid misunderstandings regarding the condition and suitability. Viewings and inspections are possible at any time by prior arrangement – your visit is expressly encouraged! Images may be similar and may show optional accessories subject to extra charge. Given internal dimensions are approximate. Additional costs may apply for vehicle documents and delivery for new vehicles. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition Ground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8.30 a.m. – 5.00 p.m., Saturday 8.30 a.m. – 2.00 p.m. Constant stock of over 500 new and used trailers! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Leto izdelave: 2005, stanje: rabljeno, = Additional Options and Equipment = - Anti-lock Braking System = Notes = Meiller body for 3-axle chassis from year 2005 We look forward to welcoming you for consultation, contract signing, or vehicle collection at our dealership. Please make an appointment in advance. If you are unable to visit us in person, we offer the option to handle the entire process via phone/email/WhatsApp/fax. Upon request, we can deliver your new vehicle directly to your doorstep. This guarantees you the best price, maximum security and convenience when purchasing a vehicle. Trade-in We are happy to accept your used car as trade-in. We also offer a digital vehicle evaluation based on your images, without you needing to visit our dealership. Our specialized purchasing team guarantees you the highest possible price. On request, we will deliver your pre-owned vehicle nationwide right to your door and take your used car back with us. Financing – Leasing Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, transporters, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Visit us on our website Over 400 vehicles in stock at all times The information provided in adverts, online, price tags and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability or warranty for errors in typing or data transmission. Specifications of equipment/features may need to be checked separately. The offer is generally without a new MOT (TÜV); however, we are happy to provide an offer from our partner workshop for a new inspection. Errors and prior sale excepted. = Additional Information = New: No Sale price: €4,500, US$5,242 VAT/margin taxation: VAT deductible Rodoxzpzwepfx Alzscd

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.280 kg, največja dovoljena obremenitev: 2.200 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 3.400 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.050 mm, prostornina tovornega prostora: 15 m³, vzmetenje: zrak, velikost pnevmatike: 195/50 R13C, barva: bela, Leto izdelave: 2017, RUKU BOX HIGHLOADER; TANDEM AXLE > Removable box body (swap system) with quick-release fasteners and body mounting > Height-adjustable overrun brake rated up to 3.5t for coupling heights up to 1.1m > Interchangeable ball coupling up to 3.5t (suitable for cars and vans) > Interchangeable DIN towing eye up to 3.5t (for trucks) > 4 recessed lashing rails in the floor > 1 horizontal lashing rail at the sides (L/R) at a height of 850mm from the floor > 4 vertical lashing rails distributed along the sides (L/R) > 3 locking bars and 6 lashing rings (steel) > Ramps available as an option (not included in the price) > Reinforced jockey wheel > Spare wheel bracket & spare wheel (195/50 R13) > 13-pin plug with 2 reversing lights and 2 rear fog lamps > Floor made of 18mm phenolic resin coated plywood Rcsdpovrz N Esfx Alzed > Box body with 25mm sandwich walls and 30mm roof > Double-wing rear door with rod locking system > EC Certificate of Conformity > 100 km/h approval for tandem trailer