Goldhofer Stz -Tl 3 -33/80 3-Achs Tl 3X Lenk Rampen Tüv N... nakup rabljenega (60.336)

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear Hodotplwiepfx Ag Isfg * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized Hfedpfsxptn Rsx Ag Isg * Axles, turntable ring, air reservoirs, towing fork painted black * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Hedpfjtvfkfex Ag Ijfg Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Hfjdpfxoxxl E Ho Ag Ijg Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Hodpfxexnqv Ao Ag Isfg We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 6,300kg Payload: 17,700kg / 23,700kg Overall length: 10,900mm Loading length: total 8,600mm; 6,500mm including rear bevel; 2,100mm gooseneck Width: 2,550mm Loading height: 900mm Further information: - Heavy-duty welded construction made from high-strength fine grain steel - Hot-dip galvanized - Rear support Hfedpowrv Sasfx Ag Isg - Twin wheels 235/75R17.5 - Warning panels - LED reversing lights - Lashing points on outer frame - Lashing rings: 4x gooseneck, 6x low bed (10,000 daN) - Single-piece hot-dip galvanized loading ramps (3,100mm x 750mm), 50mm softwood decking, laterally adjustable - Storage box in gooseneck - Plastic toolbox - Bumper - Floor with 50mm softwood decking - Climbing strips on rear loading gradient

Stanje: rabljeno, prevoženi kilometri: 672.216 km, moč: 353 kW (479,95 KM), prva registracija: 04/2014, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 5, Oprema: ABS, klimatska naprava, žerjav, Scania R480 6X2: * Atlas 186.3 crane with stone grapple * Air conditioning * Automatic transmission * Retarder * Steering axle * Cruise control * Radio-CD player Hfsdpfxsr R Snws Ag Ijg * CB radio * Tyre pressure monitoring system * Refrigerator

Stanje: rabljeno, prevoženi kilometri: 316.454 km, moč: 353 kW (479,95 KM), prva registracija: 05/2012, vrsta goriva: dizel, lastna masa: 15.110 kg, največja dovoljena obremenitev: 10.890 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x4, medosna razdalja: 3.800 mm, zavore: zaviranje z motorjem, barva: oranžna, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 2, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, dodatne luči, filter saj, greljenje sedeža, kabina, klimatska naprava, meglenke, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, servovolan, spojka prikolice, tempomat, zapora diferenciala, žerjav, * German vehicle * One owner * Condition, see photos * FASSI crane F365 XP * 11,500 kg lifting capacity at 2.45 m * 16 m lifting height * Four hydraulic extensions Hfjdpfx Aovhqfzeg Iog * Very rare: steerable, liftable trailing axle * Gross combination weight: 62,000 kg * Trailer load: 41,000 kg * Only 316,454 km, original mileage * Crane radio remote control * 4 hydraulic outriggers * 6x4 hydrodrive * Trailer coupling * Manoeuvring coupling at the front with Duo-Matic air connections * 8-speed manual gearbox * Auxiliary heater * Automatic climate control * Cruise control * Engine brake * Air-suspended comfort seats for driver and passenger * Heated seats * Sunroof * Electric windows * ABS and ASR * Electrically adjustable, heated mirrors * Leaf/air suspension with lifting/lowering function * Stereo + CD + navigation system * Work lights * Fog lamps * Beacon lights * Storage compartments * Refrigerator box * Bed * Sun roller blind * High front wall * Aluminium drop sides * Wheelbase: 3,800 mm * Gross vehicle weight: 26,000 kg * Unladen weight: 15,110 kg * Payload: 10,890 kg * Platform dimensions: L=4,000 mm / W=2,450 mm / H=800 mm If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV tests. You will find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the vehicle to ensure the buyer has an accurate understanding of its condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly welcomed. All information is provided without guarantee. We do not assume liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, prevoženi kilometri: 295.000 km, moč: 235 kW (319,51 KM), prva registracija: 04/2011, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 05/2027, zavore: retarder, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2011, Oprema: ABS, klimatska naprava, parkirni grelec, žerjav, * First registration: 04-11 * Chassis: * Euro 5 with AdBlue * 295,000 km * Palfinger PK 10 loader crane on cab * Palfinger PS Lift hook lift body * Steering axle * Lift axle * Payload: 16,000 kg * Trailer coupling * Retarder * Radio and CD player * Front tires: 315/80 R 22.5 * Matching Hüffermann trailer * Listing/Vehicle No.: MTG36 * Office: * WhatsApp: * Mobile: * Email: * Website: Rental of various trucks, tractors, and semi-trailers available for short- or long-term lease – 7.5t from €699.00 and 18t from €1,xxx per month, available at short notice! Contact us for more information. 1x MAN TGS 26.3 loader crane / hook lift body * First registration: 04-11 * Chassis number: BW151XXX * Euro 5 with AdBlue * 295,000 km * Cab with Palfinger PK 101-EH C crane * Palfinger S S 106-EK-A Lift hook lift body * Trailer coupling * Steering axle * Lift axle * 3 axles, 315/80 tires on front/rear axles + lift axle * German vehicle * Accident-free * New TÜV (inspection) available for an additional charge * Matching Hüffermann trailer Hfjdpfxoy Sdxzs Ag Ieg Net price – Trade-in possible – Rental/financing/leasing brokerage – Specifications subject to change, prior sale, errors, and omissions excepted! We deal exclusively in well-maintained German vehicles. Our service: * All customs/export documents, Euro1 * Temporary license plates / 5 days * Export license plates / 30 days * Vehicle delivery * Vehicle pick-up * General inspection and safety check Our contact details and opening hours: * Office: * WhatsApp: * Mobile: * Email: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment

Stanje: rabljeno, prevoženi kilometri: 295.000 km, moč: 235 kW (319,51 KM), prva registracija: 04/2011, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 05/2027, zavore: retarder, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2011, Oprema: ABS, klimatska naprava, parkirni grelec, žerjav, * Listing/Vehicle No.: MTG36 * Office: * WhatsApp: * Mobile: * Email: * Website: Rental of various trucks + tractor units + trailers for short- or long-term rental, 7.5t starting from €699.00 and 18t from €1,--- per month, available at short notice! Contact us for details. 1x MAN TGS 26.3 Loader Crane / Hooklift Body * First registration: 04-11 * Chassis number: BW151XXX * Euro 5 with AdBlue * 295,--- km * Driver's cab crane Palfinger PK 101-EH C * Hooklift body Palfinger S S 106-EK-A Lift * Tow coupling * Steering axle * Lift axle Hfodjy Sdx Ujpfx Ag Isg * 3 axles, tires 315/80 front/rear + lift axle * German vehicle * Accident-free * New MOT (TÜV) available upon request at extra cost * Matching Hüffermann trailer Net price – Trade-in possible – Rental/Financing/Leasing Brokerage – Subject to changes, prior sale, errors, and misprints! We deal exclusively in well-maintained German vehicles. Our Service: * All customs/export documents, Euro 1 * Temporary license plates / 5 days * Export license plates / 30 days * Vehicle delivery * Vehicle collection * Main inspection and safety check Our contact details and opening hours: * Office: * WhatsApp: * Mobile: * Email: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment

Stanje: rabljeno, največja dovoljena obremenitev: 36.910 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, Dimension B 11,450 mm Unladen weight 13,450 kg with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L Gooseneck - robust steel welded construction - formed loading platform 4,000 mm x 2,480 mm - rear articulation radius 2,400 mm - fifth-wheel load 18,000 kg - chamfered - hydromechanical forced steering (dual-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements - slewing ring-mounted fifth-wheel plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing legs Loading platform - single telescopic, designed as an external-internal tube construction with 700 mm long fixed front deck section - locking of extension stages by spring-loaded cylinders Hjdpsyxcnzefx Ag Iofg - 300 mm long sliding table Chassis - air-suspended 4-axle chassis, - BPW axle assembly (Eco), consisting of one rigid axle and three hydromechanically forced-steered axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - lifting and lowering valve as standard - 1 axle liftable Rear of vehicle - straight construction - short 1,100 mm rear overhang from centre of last axle - drop pipe support at rear Brake system - 2-line full air brake system with diaphragm brake cylinders - automatic load-dependent braking (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABV brake Special equipment - extendable width extensions - "BekaMax" central lubrication system - all available lashing rings installed - lift option (load-dependent) for 1st axle - radio remote control - stanchion rails Technical data Gooseneck Loading platform (LxW): 4,000 x 2,480 mm incl. Wirtgen slope Construction height over fifth wheel: 235 mm Fifth wheel height loaded: 1,275 mm Loading platform Platform (LxW): 8,500 mm x 2,550 mm Telescopic by 5,800 mm up to 14,300 mm Platform height loaded: 755 mm (+140/-60 mm) 2nd drive position: 805 mm (+/-100 mm) Steering 1st axle liftable 2nd to 4th axle hydromechanically forced-steered (dual-circuit steering)

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle Identification No.: YAMT23XX1K0104335 TELESCOPIC extendable by 7,300 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", 45" container when extended German Inspection (HU) valid until 02/2027 - Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically/mechanically steered axles with cable control + remote radio control Platform dimensions: 13,500 mm (including 500 mm tapered) - Loading height: 1,100 mm Fifth wheel height: 950 - 1,050 mm Rear steering radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket - electro-hydraulic unit Width marker lights Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Changes, prior sale, and errors excepted. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sales law. The purchase contract description is binding. Our offer is generally without new roadworthiness inspection (TÜV). Should a new inspection be desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. Hfjdpsywqduefx Ag Ijg

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 815 h, Na voljo za unovčenje: WACKER NEUSON 803 s 3 žlicami Leto izdelave: 2021 815 delovnih ur 0,9-tonski mikro bagr. Nagibna žlica 75 cm, žlica 60 cm + žlica 30 cm. Nastavljivo podvozje (700–860 mm), dodatna hidravlika. Helmut Jakob Pfeifer Verwertungen prodaja stroje in opremo v imenu podjetij, bank, javnih institucij ter stečajnih upraviteljev. Hfjdsyynp Tspfx Ag Ijg Kontaktirajte nas, če imate stroje ali opremo, za katere želite, da poskrbimo za njihovo prodajo ali unovčenje. Imamo dolgoletne izkušnje in veliko mednarodno mrežo strank. Našim naročnikom zagotovimo, da se za prodajo njihovih strojev in opreme ni treba več skrbeti.

Stanje: rabljeno, prevoženi kilometri: 681.612 km, moč: 427 kW (580,56 KM), prva registracija: 02/2018, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 02/2026, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Vlačilec MAN TGX 33.580, 6x4 z dvigalom Palfinger Epsilon Q150Z96, letnik: 2017, popolnoma zračno vzmetenje, retarder, TÜV veljaven do 02/2026, pnevmatike: 20-30 %, lastna teža: 14.010 kg, skupna teža: 26.000 kg, medosna razdalja: 5.250 mm, avstrijski vlačilec v dobrem stanju. Št. šasije: WMA30XZZ3JM67829, Kontakt: Ivelina Redl (rusko, bolgarsko, srbsko, angleško, nemško) Tel. št.: , napake in vmesna prodaja pridržane! Hsdev Sguaopfx Ag Iefg

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) Hfodoi Ai E Rspfx Ag Isg - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2005, Leto izdelave: 2005, Oprema: ABS, Empl 3-osna nizkopodni priklopnik, zadnja os prisilno vodena, hidravlične dvojne rampe preko lastne NATO hidravlične črpalke. Hfjdpfx Aex Sbpqeg Isg Lastna teža: 7.300 kg Nosilnost: 27.700 kg Dolžina: 13,2 m Stanje: zelo dobro Pnevmatike: 70%

Stanje: rabljeno, prevoženi kilometri: 716.419 km, moč: 353 kW (479,95 KM), prva registracija: 04/2012, vrsta goriva: dizel, skupna masa: 28.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2012, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Tractor unit MAN TGS 28.480 6X4H lift/steered Euro 5 EEV with retarder Crane: Palfinger PK 33002-EH, 5 hydraulic extensions, with rotator and radio remote control Condition: very good, regularly serviced, with valid inspection (TÜV) Tyres: 75-95% tread remaining Trailer: Hangler S SAZEL 20-6, 2 axles, 6m base, extendable to 12.65m - 18.65m, both axles steered Condition: very good, with valid inspection (TÜV) Tyres: 60-95% tread remaining Hfodpfx Agjqnqxgs Iog Price without trailer: €69,000 Total price: €89,000

Stanje: rabljeno, največja dovoljena obremenitev: 33.900 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2017, Goldhofer STZ VP2 izvlečen s nihajnimi osmi Teže / hitrost: 80 km/h Sedlasta obremenitev: 23.000 kg Obremenitev osi: 2 x 12.000 kg Dovoljena skupna masa: 47.000 kg Lastna masa: cca 13.100 kg Nosilnost: 33.900 kg Labodji vrat Dolžina x širina: 3.850 mm x 2.540 mm Višina sedla (obremenjeno): 1.250 mm Obratni polmer spredaj/zadaj: 1.970 mm / 2.300 mm Kraljevski čep: 2,0'' Sedlasta obremenitev: 23.000 kg Nizkopodno mostovje enostavno teleskopsko Dolžina x širina: 6.300 mm + 4.300 mm x 2.750 mm, razširljivo do 3.200 mm Teleskopsko izvlečno za 4.300 mm Gradbena višina: 220 mm Hfedoyg Uwcepfx Ag Iog Naložena nakladalna višina: cca 320 mm pri 100 mm odtaljenosti 2-osno podvozje zadaj Medosna razdalja 1.360 mm, enojna montaža koles 245/70 R 17,5 z BPW nihajnimi osmi, obremenitev osi 12-14 t Prisilno krmiljenje Radijsko daljinsko upravljanje Centralno mazanje Razširitve Elektro agregat

Stanje: novo, največja dovoljena obremenitev: 78.400 kg, skupna masa: 98.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Leto izdelave: 2025, with air suspension, hydromechanical forced steering, single telescopic loading platform type "Plattform," with two-piece drive-on ramps Unladen weight: 21,100 kg Payload: 76,900 kg Total length: 14,050 mm STZ-L Gooseneck - Front corners beveled at 45° (468 x 468 mm), closed outer frame - Heavy-duty steel and welded construction - Formed loading area 3,700 x 2,480 mm - Hydromechanical forced steering (dual circuit design) in flat construction (overall height 235 mm) with adjustable guide elements - Turntable-mounted kingpin plate with interchangeable 3.5" kingpin and adjustable steering wedge Hfsdpfxex Dqhko Ag Ijg - Fifth wheel load: 26,000 kg - Steering angle: 2,700 mm - Premium stowage box Loading Platform - "Plattform, single telescopic" construction - Traffidecko polymer rubber coating - Single telescopic loading platform designed as outer-inner tube construction - Locking of extension stages via spring-actuated cylinders and conical bolts - Intermediate table 300 mm - Fixed front support, 700 mm long Chassis - Air-suspended 6-axle chassis, wheelbase 1,510 mm - BPW axle assembly, consisting of one fixed axle and five hydromechanically forced-steered steering axles with a max steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift/lower valve for lowering to min. 785 mm or raising to max. 985 mm (non-driving positions) - Chassis with open outer frame - Excavator trough at rear: 3,340 mm long and 874 mm wide Vehicle Rear - "Beveled 500 mm" design - Short overhang: 1,100 mm from center of rearmost axle - 2 integrated hydraulic supports for stabilizing the vehicle rear during loading Two-piece drive-on ramps with Super Grip covering - 2,600 + 1,200 x 720 mm - Fixed hydraulic lift with hand pump, cable extension - Hydraulic ramp adjustment Braking System - Two-line full air disc brake system with diaphragm cylinders - Automatic load-sensitive brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake system - Hydraulic connection - easyControl - 3-sided aluminum drop sides - Load-dependent lifting function - Central lubrication system "BEKA-MAX" - Extendable widenings incl. infill planks, telescopically extendable up to 3,000 mm Technical Data Gooseneck: Loading area (LxW): 3,700 x 2,480 mm Bevel: 1,080 mm Construction height over fifth wheel: 235 mm Loaded fifth wheel height: 1,300 mm Turning radius to rear: 2,700 mm Turning radius to front: 1,350 mm Kingpin: 3.5" Loading Platform: Loading area (LxW): 11,000 x 2,750 mm Telescopically extendable by 4,340 mm In stages up to (LxW): 15,340 x 2,750 mm Including rear bevel: 500 mm Loaded deck height: approx. 885 mm (+/-100 mm) or 845 mm (+140/-60 mm) Chassis: Wheelbase: 5 x 1,510 mm Overhang: 1,100 mm Steering: 1st axle fixed 2nd – 6th axle hydromechanically forced-steered (dual circuit system)

Stanje: novo, največja dovoljena obremenitev: 74.600 kg, skupna masa: 98.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, with hydraulic suspension, MPA axles 12 t, hydromechanical forced steering, double telescopic load platform type (platform version) Unladen weight: 23,400 kg Payload: 74,600 kg Length: 14,650 mm – 31,000 mm STZ-L Gooseneck - Hydraulic lift/lower function, lift +295 mm /-295 mm - Front corners beveled at 45° (468 x 468 mm), closed outer frame - Robust steel and welded construction - Deck dimensions: 3,750 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) in flat design (height 235 mm) with adjustable guide elements - Turntable-mounted saddle plate with interchangeable 3.5" king pin and adjustable steering wedge - Fifth wheel load: 26,000 kg - Steering radius: 2,800 mm - Comfort tool/storage box Loading Platform - Design: “platform, double telescopic” - Traffidecko polymer rubber surface - Platform is single-telescopic, designed as external/internal tube construction - Extension stage locking by spring accumulator cylinder and locking pin Hjdpfxewcy Srs Ag Isfg - Fixed front support, length: 700 mm Chassis - 6-axle chassis with hydraulic suspension, MPA MacPherson axle technology, wheelbase 1,510 mm - BPW axle module, consisting of one non-steered axle and six hydromechanically forced-steered steering axles with max steering angle of 60° - Axles with adjustable tapered roller bearings and automatic slack adjusters (ASA) - Ride height: 885 mm, +250 mm/-100 mm - Chassis with open outer frame Rear of Vehicle - Design: “beveled, 500 mm” - 2 integrated mechanical support legs for rear stabilization during loading Brake System - Two-line all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (ASA) - Parking brake via spring accumulator cylinders - ABS system - Hydraulic connection - easyControl - Aluminum drop sides, 3-sided - 2 axles with lift function - Central lubrication system “BEKA-MAX” - Power pack - Extendable outriggers incl. insert boards, telescopically extendable up to 3,390 mm Technical Data Gooseneck Platform (L x W): 3,750 x 2,480 mm Build height above fifth wheel: 235 mm Fifth wheel height loaded: 1,250 mm Steering radius rear: 2,800 mm Steering radius front: 1,280 mm King pin: 3.5" Platform Platform (L x W): 11,300 x 2,750 mm Telescopic extension: 8,250 mm + 8,100 mm Stepwise extension up to (L x W): 27,650 x 2,750 mm Incl. rear bevel: 500 mm Load height loaded: approx. 885 mm Chassis Wheelbase: 5 x 1,510 mm Overhang: 1,100 mm Steering 1st – 6th axle hydromechanically forced steered (dual-circuit system)

Stanje: rabljeno, prevoženi kilometri: 743.974 km, moč: 353 kW (479,95 KM), prva registracija: 08/2016, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2016, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, * MAN TGX 26.480 Hedpfxjxzwdgs Ag Isfg * Menjalno podvozje * Servisna knjižica * Medosna razdalja 5000 mm * 3x ključi * Popolno zračno vzmetenje * Dvigalna os * Krmiljena os * Nakladalna plošča 00 * Retarder * Klimatska naprava * Leto izdelave 2016 * Kilometri 743.974 * Stanje dobro * WMA21XZZ8GM71370 * Prodaja samo s prikolico Sistem Trailers 18500¤ * Leto izdelave 2007 * Delovni čas od pon. do pet. 07:30-12:00 13:00-18:00, sobota 07:30-17:00. * E-mail: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber angleško: Mladen Ilic

Stanje: rabljeno, prevoženi kilometri: 238.760 km, moč: 290 kW (394,29 KM), prva registracija: 02/2018, vrsta goriva: dizel, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 07/2026, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.500 mm, Oprema: ABS, klimatska naprava, * Mercedes Benz Arocs 3240 8x2 šasija * Prva registracija: 02.2018. * Međuosovinsko rastojanje: cca 5 m * Euro 6 * Telligent automatski menjač * Klima uređaj * Tempomat * Vešanje: lisnate opruge - lisnate opruge – vazdušno – vazdušno * 1 + 2 + 4 osovina – upravljačka osovina * Radna rasveta * Centralno podmazivanje * AdBlue * Vazdušno sedište Hfodjymt Tiepfx Ag Ijg * Električni podizači stakala + električni retrovizori * Radio CD * Bluetooth * Diferencijalna blokada * Multifunkcionalni volan * Sunđerica * ABS * Gume 315/80R22,5 cca 80-80-20-40% * Nemačko vozilo * Neto prodaja unutar EU moguća samo uz depozit za PDV i dokaz o registraciji u zemlji odredišta (potvrda o isporuci), * Prodaja samo pravnim licima, moguć prevoz do luke, * Ova ponuda je neobavezujuća i podložna promenama. * Zadržavamo pravo na greške i prethodnu prodaju. Ne garantujemo za greške pri unosu. * Pregled vozila moguć samo po dogovoru, * WhatsApp

Stanje: rabljeno, Leto izdelave: 2006, Oprema: ABS, Goldhofer STZ-H6-57/80A telescopic low-loader for wagon transport Approval                     Technical specification Maximum speed:    80 km/h                 65 km/h Fifth wheel load:              23,000 kg                26,000 kg Rear axle load:                10,000 kg                11,000 kg Gross vehicle weight:      83,000 kg                92,000 kg Payload:                         52,500 kg                61,500 kg Unladen weight (without accessories):        30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Construction height: 235 mm Saddle height: 1,350 mm Front DLR: 1,420 mm Rear DLR: 2,700 mm Kingpin: 3.5 inch Inclination: chamfered 10 degrees Front corners: chamfered 45 degrees Floor covering: 50 mm spruce Landing legs: mechanical Width with side walls: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically adjustable in height. With mechanical drop-leg supports and hydraulic stabilizer cylinders. Hydromechanical forced steering (twin-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements and THP steering cylinders. Loading area: Type: Platform Adjustable height: no Length: 13,000 mm Width: 3,000 mm Floor covering: sheet metal/spruce, 50 mm Wheel recesses: no Extensions: no Telescopic: single-stage extendable Length 1: 10,000 mm Loading height (laden): Loading height 1: 815 mm Loading area can be telescoped, designed as an outer and inner tube construction, with a 1,070 mm fixed platform section at the front. The fixed platform section incorporates a pin-lug coupling for coupling extension beams for girder bridges. The welded-on U-section rails serve as rail tracks for rail gauges of 1,000 mm (track spacing 1,015 mm) and 1,435 mm (track spacing 1,450 mm). Stage locking of the telescopic sections via spring-loaded cylinders and conical bushings. Platform height on the centre tube (outer tube) approx. 815 mm (+/- 130 mm) Platform height on inset rail elements approx. 790 mm (+/- 130 mm) Rear running gear: Type: Standard Loaded height: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Floor covering: sheet metal Extensions: no Wheel recesses: no Excavator trough: no Axles: Number of axles: 6 Lifting axle: see accessories Axle type: Cranked stub axle Axle compensation: hydraulic Axle make: BPW/Eco Drive modes: 1 Axle travel (1) +/-: 130/130 mm Axle travel (2) +/-: 0/0 mm Raise/lower valve: Yes Hedpeyfvypjfx Ag Iofg 1st axle can be pneumatically lifted with air bellows Steering: Number of steered axles: 6 Arrangement: all steered Max. steering angle: 45° degrees Steering type: hydraulic twin-circuit Tyres: Size: 235/75 R 17.5 143/141 J Type: Twin tyres Rim: Disc Rim centring: Centrally located Brakes: EU compliant: Yes AGS: Yes ALB: Yes ABS: Yes with ABS deactivation: No Parking brake: Spring-actuated EBS: No ECAS: No Notes: Brake calculation no.: GH 4324S Chassis comments: Steering configured for extended position with increased steering lock of the front axles. Open wheel cut-outs above the wheels with narrow crossbeams between (ALU covers, see accessories below). Control elements mounted left, protected in direction of travel...

Stanje: rabljeno, Leto izdelave: 2006, Oprema: ABS, Goldhofer STZ-H6-57/80A Telescopic Low Loader for Wagon Transport Approval                    Technical 1 Speed:                80 km/h                65 km/h Fifth Wheel Load:      23,000 kg           26,000 kg Rear Axle Load:        10,000 kg           11,000 kg Gross Weight:          83,000 kg           92,000 kg Payload:                52,500 kg           61,500 kg Unladen Weight (without equipment): 30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Construction Height: 235 mm Coupling Height: 1,350 mm Front DLR: 1,420 mm Rear DLR: 2,700 mm King pin: 3.5 inches Chamfer: 10 degrees Front Corners: Beveled 45 degrees Flooring: Spruce 50 mm Landing Legs: Mechanical Width with side walls: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically liftable and lowerable With mechanical drop tube supports and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (construction height 235 mm) with adjustable guide elements and THP steering cylinders. Loading Platform: Type: Platform Liftable: No Length: 13,000 mm Width: 3,000 mm Flooring: Sheet/Spruce 50 mm Wheel recesses: No Extensions: No Extendable: Single-telescopic Length 1: 10,000 mm Loading Heights (laden): Loading height 1: 815 mm Loading platform extendable, implemented as an outer and inner tube construction, with a fixed platform section at the front, 1,070 mm long. Integrated pin-eye coupling in the fixed platform section for coupling deck bridge extension beams; our welded Vkt. rails serve as running rails for track gauges 1,000 mm (track width 1,015 mm) and 1,435 mm (track width 1,450 mm). Locking of the extension stages by spring-loaded cylinders and conical sleeves Platform height at the center frame tube (outer tube) approx. 815 mm (+/- 130 mm) Platform height at the embedded rail elements approx. 790 mm (+/- 130 mm) Hfodpfx Aeyfvf Ssg Isg Rear Undercarriage: Chassis Type: Standard Loaded loading height: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Flooring: Sheet Extensions: No Wheel recesses: No Excavator recess: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Drop-arm stub axle Axle equalization: Hydraulic Axle make: BPW/Eco Operating positions: 1 Axle lift (1) +/-: 130/130 mm Axle lift (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle can be pneumatically lifted with lift airbag Steering: Number of steering axles: 6 Steering axle arrangement: all steered Max steering angle: 45° Steering type: Hydr. 2-circuit Tyres: Dimension: 235/75 R 17.5 143/141 J Tyre type: Twin Rim type: Disc Hub centering: Centered Brake Code: Compliant with EU regulations: Yes AGS: Yes ALB: Yes ABS: Yes With ABS del: No Parking brake: Spring-applied EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Chassis Note: Steering designed for the extended mode with greater steering angle of the front axles Open wheel cutouts above the wheels with narrow cross members between (ALU covers see accessories) Control elements protected on the left in the direction of travel...