Faymonville Max Trailer 3-Achs-Plateau-Sattelaufl. nakup rabljenega (51.307)

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: Fgjdsxttc Ajpfx Al Hsb * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, PRSSQ 27 SYS Three-axle Curtainsider with Crosswise Laminated Timber Floor Curtainsider body height laterally: 2,650 mm (from loading platform to lower edge of outer beam) Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Ride height unladen approx. 1,250 mm at 1,130 mm fifth wheel height COC Chassis frame construction made of welded longitudinal beams and through-fitted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings & lashing holes on the outside 13 pairs of lashing rings (5t certificate) Axles: Manufacturer’s free choice (SAF/BPW) Axle 9t 22.5" with large disc brakes EBS brake system by Knorr or Wabco Tire pressure monitoring system Flashing side marker lights European brand tires 385/65 R 22.5 Body certificate DIN EN 12642 XL valid with two rows of timber slats Certificate for 9t forklift axle load (DIN EN 283) Certificate for 5t per lashing ring Rear portal with 4 internal locking rods Door wings made of steel sandwich profiles Sliding roof with automatic locking, opens from rear 3 sets of side sliding curtains Front wall: steel, 400 mm steel cassette with inner wear plate approx. 2.4 m Lighting system: 24 Volt with LED multifunctional lights Anti-slip phenolic coated floor, 27 mm, crosswise installation Roof tarpaulin – reinforced 12x12 roof fabric Optional with tail lift Optional with internal sideboards Optional with FLEXSTRAP system Optional with pallet box, spare wheel, etc. Body painted in RAL colors as specified Chassis in RAL 9005 or MB 7350, other colors available at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Optional: hot-dip galvanized Price ex works Fsdpfxog Dkxzo Al Hegb Attention! Pictures show special equipment Get professional advice and a free, no-obligation quote. Leasing, financing, or hire purchase possible! We can cater to your individual requirements! Contact us – we are happy to prepare an offer for you. Errors and interim sale reserved!

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke Fgodpfx Aey Ercbjl Hsb

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2022, naslednji pregled (TÜV): 03/2027, Kögel 3-osna mega prikolica s stransko drsno ponjavo, drsno streho, dvižno streho, letvami za palete, 8 aluminijastih letvic, nevtralna modra ponjava. Zelo dobro ohranjena rabljena oprema. Prodaja izključno podjetjem brez kakršne koli garancije. Pridržujemo si pravico do napak in predhodne prodaje. Fgsdpfx Aloyhbbdo Hjb

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Fgodpfx Astcwmijl Hjb

Stanje: rabljeno, prva registracija: 02/2008, Leto izdelave: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3-osni plato polpriklopnik∗Krmilne osi∗ALCOA∗ !!! zelo dobro stanje !!! ● ABS ● Zračno vzmetenje ● Dvižni/spustni sistem ● Višina tal: 1.420 mm ● Alcoa - Dura Bright platišča ● 3 x Mercedes osi z disk zavorami ● vse 3 osi so vodljive! ● Pneumatike: 385/55 R 22.5 ● Globina profila: 3/2 / 5/4 / 5/6 mm ● Skupna masa: 42.000 kg ● Lastna masa: 10.200 kg ● Nosilnost: 31.800 kg - nemški polpriklopnik - Tehnični pregled: na zahtevo in za doplačilo: NOVO! Napake in vmesna prodaja pridržane! = Dodatne informacije = Za več informacij se obrnite na Joannis Arpantzanis ali Kai Bühler. Fsdpfsyutxzsx Al Hogb

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable Fgedpfxotplwio Al Heb * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability Fodpfx Aloxptn Ro Hsgb * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized * Axles, turntable ring, air reservoirs, towing fork painted black * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2016, skupna dolžina: 12.750 mm, skupna širina: 2.540 mm, skupna višina: 3.650 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, medosna razdalja: 6.460 mm, barva: rdeča, Leto izdelave: 2016, Oprema: ABS, 1 x self-tracking axle / trailing steering axle. Hydraulic ramps. Loading bed: 860 cm Loading height: 90 cm Coupling height: 130 cm = Further Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tread depth left inside: 40%; Tread depth left outside: 40%; Tread depth right inside: 40%; Tread depth right outside: 40% Rear axle 2: Twin tyres; Tread depth left inside: 35%; Tread depth left outside: 35%; Tread depth right inside: 35%; Tread depth right outside: 35% Fgjdpoy Igkrsfx Al Heb Rear axle 3: Twin tyres; Tread depth left inside: 50%; Tread depth left outside: 50%; Tread depth right inside: 50%; Tread depth right outside: 50% Weights Unladen weight: 9,190 kg Payload: 38,810 kg Gross vehicle weight: 48,000 kg Identification Type number: F-S43-1A1Y / HYDRAULIC RAMP = Company Information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We strive to provide correct information, but no rights can be derived from the texts provided.

Stanje: rabljeno, Leto izdelave: 2018, Faymonville Maxtrailer F-S43-1AAF. Baujahr: 2018. 9-Tonnen SAF-Achsen. Leergewicht: 9.961 kg. Maximales Gewicht: 45.000 kg. Sattellast: 18.000 kg. Lenkachse mit 3 gelenkten Achsen. 7,5 Meter ausziehbar. Luftfederung. Edelstahl-Werkzeugkästen. Funkfernbedienung. 1. Achse Liftachse. EBA ABS ALB. Abmessungen Ladefläche: L: 13.550 mm. B: 2.480 mm. H: 1.400 mm. H öberkante Bordwände: 600 mm. Bereifung: 385/65R22,5 70% Profil. Fgedpfx Aley Ay R Ie Hjb ID NR: 513. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis auf alle Anzeigen, Angebote und Offerten von Heinhuis, auf alle mit Heinhuis abgeschlossenen Verträge sowie auf eventuelle diesen vorangegangene Verhandlungen. Mit jeglicher Rückmeldung akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2018 Leergewicht: 9.961 kg Zuladung: 35.039 kg zGG: 45.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Weitere Informationen erhalten Sie über: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2021, Faymonville Maxtrailer F-S43-1AAF. Baujahr: 2021. 10,5 t BPW-Achsen. Eigengewicht: 9.446 kg. Max. Gesamtgewicht: 49.500 kg. Sattellast: 18.000 kg. Luftfederung. Werkzeugkasten am Schwanenhals. 3. Achse ist Nachlauflenkachse. Baggerbrücke. Radmulden (50 cm tief). Mechanische Rampen (Länge: 2.450 mm). Abmessungen: Schwanenhals: Länge: 3.450 mm. Breite: 2.550 mm. Höhe: 1.400 mm. Sattelhöhe: 1.200 mm. Ladefläche: Länge: 9.300 mm. Breite: 2.550 mm. Höhe: 900 mm. Bereifung: 235/75R17,5 50 % Profil. Deutscher Auflieger! ID-Nr: 678. Fodpfx Aljy Ayy Ns Hegb Es gelten die Allgemeinen Geschäftsbedingungen der Heinhuis für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis sowie alle von Heinhuis abgeschlossenen Verträge und die ihnen vorausgehenden Verhandlungen. Mit jeder Art der Reaktion akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2021 Leergewicht: 9.446 kg Nutzlast: 40.054 kg zul. Gesamtgewicht: 49.500 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Fsdpfx Alog Sk Tvs Hegb Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" Fgedjy Iq Tdjpfx Al Hob - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, največja dovoljena obremenitev: 56.200 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2021, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.625 mm, Leto izdelave: 2021, Oprema: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low loader semi-trailer, air-suspended, with 2 self-steering trailing axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, 1st owner Fedpfx Ajy Iq Arel Hegb 4.1 m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALLOY WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, bevel approx. 1,000 mm x 10° Loading platform: Telescopic loading platform, approx. 8.8 m long, ramped at approx. 500 mm x 10° Excavator dipper recess approx. 2,490 x 750 x 210 mm Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually Axles and suspension: 4x BPW axles 12 t, 2 fixed, 2 trailing, self-steering axles Electromagnetic reverse gear lock + manual operation Air suspension with raise/lower valve Tyres: 235/75 R17.5 3PMSF MICHELIN / PIRELLI Load index: 143/141J (144/144F), new spare wheel 16x ALLOY WHEELS, POWDER-COATED WABCO brake system, EBS-E EU regulations 24-volt lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets: 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of outer frame Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%) hot finished Steel structure: Steel grades: * S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) * Welders certified to DIN-EN 287-1 * Welding process MAG according to EN ISO 4063 * Shielding gas M21 according to EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic power unit for hydraulic functions * Spare wheel bracket on the front wall * Mounting holes for bolt-on lashing rings * First hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole at the upper rear of the outer longitudinal member * 1 pair screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm thick hardwood flooring * 1 pair removable aluminum side boards, aluminum rear board approx. 400 mm high, anodized * 2" kingpin * Guide plate on the gooseneck for the fifth wheel plate approx. 500 mm wide * 4 wheel chocks with bracket * Receptacles for ALU approach ramps * JOST mech. landing gear with 2-speed gearbox and crank * Continuous hardwood flooring, approx. 50 mm thick, interrupted between axles * Platform lock with conically welded locking profiles, 250 mm incl. pretension plate * Slots for insertable and repositionable bridging elements at the front of the platform * 1 intermediate table with offset platform, approx. 300 mm wide for the sliding tube * Front and rear with slots for insertable and repositionable bridging elements * Removable cover flush with the loading platform * Extensions extendable by approx. 230 mm per side * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm, in platform before 1st axle * Wheel recess covers split lengthwise, with wooden overlay, secured externally with locking pins * Wheel recesses with steel covering and 15 x 15 mm square climbing bars approx. every 200 mm * Between the 2nd and 3rd axle, in the platform, one pair of fixed wheel recesses * Rubber flooring "Super Grip" 25 mm and steel covering approx. 5 mm as additional reinforcement on the ramped section of the platform * Control valves for hydraulic ramps on the right an...

Stanje: rabljeno, lastna masa: 11.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 700 mm, prostornina tovornega prostora: 23 m³, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2018, vrsta prenosa: mehanski, Oprema: ABS, Lastna masa: 11.550 kg, dovoljena skupna masa: 42.000 kg, tovorni prostor (D Š V): 13.450 mm x 2.540 mm x 700 mm, volumen tovornega prostora: 23 m³, zračno vzmetenje, dvižna os: 1. os, elektronski zavorni sistem EBS, sledilno krmiljenje: 3. os, dvojna montaža pnevmatik, minimalna dolžina 13,45 m, maksimalna dolžina 18,20 m, lastna masa 11.550 kg, obremenitev sedla 18.000 kg, skupna masa 48.000 kg, izjemno dovoljenje DE, izvlečno, hidravlične nastavljive rampe, 3. os prisilno vodena, dvojne pnevmatike 235/75R17,5, vitel, tehnični pregled do 01-2027, YAMT13XXXJ0102830, Nezavezujoča ponudba, napake in vmesna prodaja pridržane. Slika ni nujno enaka ponudbi. Fjdpjy Dng Tsfx Al Hsgb

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, skupna dolžina: 9.300 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, medosna razdalja: 1.360 mm, barva: modra, Leto izdelave: 2023, Oprema: dvižna zadnja plošča, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und unbenutzt Gewichte / Ladefähigkeit: Sattellast: 23.000 kg Achslast: 12.000 kg je Achse Gesamte Achslast: 48.000 kg zul. Gesamtgewicht (zGG): 71.000 kg Eigengewicht: 16.535 kg Nutzlast: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Lastindex 146/146 F) 1. Achse als Liftachse Abmessungen: Ladeflächenlänge: 9.300 mm ausziehbar um: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladehöhe: 900 mm Weitere Ausstattungen: Doppelt ausziehbare Ladefläche Containerverriegelungen Ausschubverbreiterungen + Holzauflagen für Breitenverbreiterung Zurringe Satz doppelt klappbare Auffahrrampen Zentralschmieranlage 1x Ersatzrad + Halterung JOST Stützvorrichtung Elektrik 24 Volt Königszapfen 2.0″ Eine verzinkte Stahlbordwand Elektrisch betriebene Hydraulikpumpe Manuelle Lenkung Twistlocks = Weitere Informationen = Allgemeine Informationen Baujahr: 2023 Achskonfiguration Reifengröße: 245/70 R17.5 Federung: Luftfederung Hinterachse 1: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, BPW Achsen; Reifenprofil links innen: 100%, links außen: 100%, rechts innen: 100%, rechts außen: 100% Hinterachse 2: Zwillingsbereifung, max. Achslast: 12.000 kg, gelenkt; Reifenprofil links innen: 100%, links außen: 100%, rechts innen: 100%, rechts außen: 100% Hinterachse 3: Zwillingsbereifung, max. Achslast: 12.000 kg, gelenkt; Reifenprofil links innen: 100%, links außen: 100%, rechts innen: 100%, rechts außen: 100% Hinterachse 4: Zwillingsbereifung, max. Achslast: 12.000 kg, gelenkt; Reifenprofil links innen: 100%, links außen: 100%, rechts innen: 100%, rechts außen: 100% Gewichte Leergewicht: 16.535 kg Nutzlast: 54.465 kg zul. Gesamtgewicht: 71.000 kg Funktionalität Ladehöhe: 900 mm (Hinweis: Angabe 65535 cm in Daten war fehlerhaft) Aufbau ausziehbar: Ja Fsdpfjuu Hcfox Al Hjgb Zustand Allgemeiner Zustand: Sehr gut Technischer Zustand: Sehr gut Optischer Zustand: Sehr gut Finanzen Preis: Auf Anfrage Weitere Informationen Bitte wenden Sie sich für weitere Informationen an Stefan Schaapveld.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) Fgsdpfx Aey Hxd Isl Hsb - MAG welding process according to EN ISO 4063

Stanje: novo, največja dovoljena obremenitev: 34.500 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, skupna višina: 350 mm, Oprema: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – extendable | 34t payload | 2 axles | from €136,900 New vehicle – can be customized to your specific field of application. High payload with robust construction for maximum cost-efficiency. ----Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg fifth wheel load • SUPER LOW low bed trailer, extendable, with approx. 40 mm hardwood flooring • Hydraulically forced-steered pendle axles with axle equalization • Rear axle steering conveniently controlled via cable remote • Heavy-duty lashing points for professional cargo securing • Continuous excavator trough for versatile transport tasks ----Chassis & Safety • WABCO EBS brake system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • 245/70 R17.5 tires • LED lighting system Short. Strong. Ready. ----Construction & Durability • High-strength fine-grain steel construction • Metallized vehicle chassis with premium corrosion protection • Multi-layer paint system for extended service life • Cavity sealing with special wax ----Included Options • Galvanized front wall + spare wheel Fodoypa Ifjpfx Al Hsgb • Electro-hydraulic unit • Preparation for 20'/40' container transport • Load gauge incl. load diagram • Central lubrication system BEKAMAX • Extendable warning panels with LED • Beacon holder ----Other equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary according to configuration.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2011, dolžina tovornega prostora: 9.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 12.700 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Accessories = - Lift axle = Remarks = SAF axle with drum brakes. 1 x lift axle. 1 x self-steering/trailing steering axle. = Further Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Fgodpfx Aoy Daxzol Hsb Suspension: Air suspension Rear axle 1: Twin tyres; Tread depth left inside: 40%; Tread depth left outside: 40%; Tread depth right inside: 40%; Tread depth right outside: 40% Rear axle 2: Twin tyres; Tread depth left inside: 70%; Tread depth left outside: 70%; Tread depth right inside: 70%; Tread depth right outside: 70% Rear axle 3: Twin tyres; Steered; Tread depth left inside: 50%; Tread depth left outside: 50%; Tread depth right inside: 50%; Tread depth right outside: 50% Weights Unladen weight: 10,500 kg Payload: 44,500 kg Gross vehicle weight: 55,000 kg Identification Type number: STN-3U / HYDRAULIC RAMP / LIFT A = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information but no rights can be derived from the texts provided.

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide Fgjdervw U Sepfx Al Hob • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4 Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles and Tyres: BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve Manufacturer by our choice Sockets and Lighting: 24-volt lighting system in accordance with EU regulations ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallizing Full steel construction, shot-blasted, then hot-finished with ZINACOR 850 Paintwork: 6-stage finishing process: Complete steel construction shot-blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax Accessories: Detachable front wall made of steel, approx. 400 mm high Fgjdpfxsrigw Rs Al Hsb Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches) 1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish 3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 2 wheel chocks with holder in front of the front wall Mechanical landing legs with 2-speed gearbox and crank Control valves for hydraulic ramps located on the right side of the vehicle 1 pair of mechanical rear supports Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2 Removable guard covering the pump(s) of the central lubrication system Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember Manual and documentation One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version Fgodpfx Aljyhkqno Heb * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: rabljeno, številka stroja/vozila: YAFTL4005F0017017, konfiguracija osi: 3 osi, prva registracija: 01/2015, skupna dolžina: 13.900 mm, skupna širina: 2.750 mm, skupna višina: 3.300 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2015, = Additional Options and Accessories = - Drum brakes = Notes = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Structure Year of manufacture: 2015 Special transport Hydraulic ramps: ✓ Length over axles: 880 cm Loading floor length: 880 cm (extends to 660 cm) Gooseneck length: 420 cm Low loader: ✓ Maximum width: 3 m (275 cm) Maximum length: 1540 cm (880 + 660 cm) Extendable: ✓ Telescopic: ✓ = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle brand: Gigant Brakes: drum brakes Suspension: air suspension Front axle: twin tyres; Left inner tyre tread: 45%; Right inner tyre tread: 60% 1st middle axle: twin tyres; Left inner tyre tread: 20%; Right inner tyre tread: 30% 2nd middle axle: twin tyres; steered; Left inner tyre tread: 55%; Right inner tyre tread: 40% Rear axle: twin tyres; steered; Left inner tyre tread: 40%; Right inner tyre tread: 50% Weights Fedpfx Aljxyffpo Hjgb Unladen weight: 11,750 kg Payload: 61,000 kg Gross vehicle weight (GVW): 73,000 kg Functional Body brand: Faymonville F-S44-1ALN Loading platform height: 85 cm = Company Information = For more information on this unit please call: or email: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Stalan otkup i prodaja, kao i zamena i iznajmljivanje dizalica i podiznih vozila, kao i građevinskih i teških vozila. Fodpfxeu Aynlo Al Hjgb

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° Fgedpfx Alsrgzv Ne Hjb * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck