Müller-Mitteltal 14,4 To. Tand.- Tiefl., Breite Rampe, Gummi nakup rabljenega (37.455)

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange towing eye: * Vertically adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General attachments: * Jost mechanical landing gear, front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Two-step step on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipper body: * Steel, pallet-width, 3-way tipper body * Continuous upper sidewalls with inner pipe reinforcement, foldable without center stanchions, with drop side spring assist * Tailboard foldable and swinging with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor * Net hooks, mounting rail at the rear for approach ramps * Prepared for subsequent installation of sidewall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner equipped with 1 x 5 t lashing ring, each side with 4 x 3 t lashing eyes recessed in the outer frame ----ALU approach ramps: * 1 pair aluminum approach ramps approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment under the loading area, integrated into the chassis ----Tyres: * Tyres 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * Side boards painted in a RAL custom color (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL Psdpsv Dz N Nefx Alxopu * New vehicle without first registration, including manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: Ppsdpfx Alsy Ngzyoxou * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: Ppedpfx Asl Th A Eolxeu * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized steel sheet, mounted on the right side * Plastic quarter mudguards * Two-step entry on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights ----Tipper Platform: * Steel pallet three-way tipping body * Continuous side walls at the top with internal tube reinforcement (without central stanchions), foldable using drop side spring lifters * Rear wall foldable and pendulum-mounted, with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Mesh hooks, rear mounting rail for drive-on ramps * Prepared for later retrofitting with side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load Securing: * Each corner with 1 x 5 t lashing ring and each side with 4 x 3 t lashing rings embedded in the outer frame ----Aluminum Drive-on Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform integrated in the chassis, accessible from the rear ----Tires: * 385/55 R 22.5 tires ----Painting / Coating: * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sidewall finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted Psdpfx Alsy Ngz Hjxopu * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower function ----Drawbar / Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (actuated via reverse gear) * 1 removable LED beacon incl. bracket at the rear * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External fold-down supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side * At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front wall and end cross member for 1.2 t lashing options Ppedpfx Alsv D Tbdjxju ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment under the loading area, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized--- * Axles, air tank, front landing leg, and flange towing eye painted in black ----Other information: * Brand-new vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 39/2026

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: Ppjdpfx Aoylfvmjlxsu * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized Pedpjylfvgefx Alxjpu * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring system with display option in the truck via EBS signal—no installation required on the truck side * 15-pin power connector * LED lighting * Front support winch * Rear external fold-out supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Provisions in front of the front wall and at the rear for retrofitting 20" container locks * Bolted front wall made from flat sheet * Trapezoidal-profile, drop-down steel side walls, centrally divided once * Sliding steel rear wall between the ramps, mounting bracket for storage inside in front of the front wall when not in use * Bolted rear post/stake * Perforated external frame, bent at approx. 45 degrees, with 2-ton lashing capacity every 480 mm * Installation of 3-ton folding lashing brackets possible every 600 mm—4 lashing rings installed on each side * 1 x 6.3-ton lashing ring at each of the front and rear corners * "Profifix" lashing rail centrally in the longitudinal axis for lashing options up to LC 3,000 daN * Various boreholes in the front and rear cross member for 1.2-ton lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach ramp approx. 860 mm * Chassis, drawbar, front wall, tailgate, fold-out supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted black * Side wall paintwork in an RAL color of your choice (excluding special or metallic paints), color can be changed up to approx. 6 weeks before completion Ppodpfx Ajl Th Dfelxou * --Reinforced and certified body according to EN 12642 XL, incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering device * Tow bar height-adjustable by approx. 300 mm * Tow bar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right exterior bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions for subsequent installation of 20" container locks in front of the bulkhead and at rear * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profile steel sheet, center-folding, divided once * Rear steel panel insertable between ramp mounts; storage inside at bulkhead when not in use * Bolted rear stanchions Ppodel Thvxjpfx Alxju * Perforated outer frame approx. 45° angled, lashing points (2 t lashing capacity) every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm – four lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Profifix lashing rail along the longitudinal axis center, for lashing capacity up to LC 3000 daN * Various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear driving slope approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, drawbar eye, and landing gear painted black * Side wall paint in desired RAL color shade (no special or metallic finishes), modifiable up to about 6 weeks before completion * -- Reinforced and certified bodywork according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 31/2026

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting Podpfx Aleq Dyv Ioxjpu * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Pedpfetplwfox Alxepu * Available from CW 19/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release system for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables for agricultural and forestry vehicles * Power supply for radio remote: 12+24 V via taillight ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium wheels * Split-pin towing coupling (use only with retracted underrun protection) * Enclosed plastic half-shell single mudguards * Two-step access before the front bulkhead on the left side * Shovel and broom holders in front of the front bulkhead * 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side * Enclosed side protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of hooklift via radio remote control * Remote control with rapid function when lowering, not when raising * Emergency stop switches left and right sides * Container supports with 4 lateral supports per side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: Pjdpfxox Dp Ats Alxspu * Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as-new condition ----Delivery time: * Vehicle is immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via positioning cylinder * Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Eye: * 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lamps activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Power supply for radio control 12+24V via tail light ----General Attachments: * BPW landing gear at the front * Mechanical, extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) Psdpfx Asx Dp Agslxjpu * Closed plastic half-shell individual mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted * Closed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tractive force * Hook height 1,570 mm * Hooklift operated via radio remote control * Radio remote control with fast function during tipping, but not during winching * Emergency stop switches on both left and right sides * Container bed with 4 side supports each and one roll at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with raising the main arm * 2 x mechanical folding rear supports * Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load * Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted while tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow ----Information: * Subject to errors and prior sale * Vehicle in very good / like-new condition ----Delivery Time: * Vehicle immediately available

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Towing Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at front * Rear: 2 mechanical foldable supports * Plastic toolbox, right side * 2-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking mounts, plus 2 on the front wall * Steel pallet, 3-way tipper body (continuous side walls - without central stanchions - foldable with side wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel plate floor * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * Plus 4 x 3 t recessed lashing points per side in the outer frame ----Ramps: Psdpfxjq Euagj Alxjpu * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, foldable supports, and rear stanchions hot dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side boards painted in RAL color of your choice (excluding special or metallic paint); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: Pjdpfxol Thw Io Alxepu * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin supplementary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access ladder, front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 pieces at the front wall * Steel pallet—3-way tipper body (continuous side panels—no centre stanchions—fold-down with side panel spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side in the outer frame ----Ramps: * 1 pair of aluminium ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment beneath the loading area integrated into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paint: * Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Sideboard paintwork in preferred RAL colour shade (excluding special or metallic paints), changeable up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted * Sample images ----Delivery Time: * available from approx. week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power plug * LED tail lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical foldable support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis Pedpfx Aox Hm Rcslxspu * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks positioned at the central locking mountings and 2 at the front bulkhead * Steel pallet - 3-way tipper body with reinforced Strong sidewalls (continuous upper sidewalls with internal tube reinforcement – without central stanchions – foldable with sidewall spring lifting device) * Screw-fixed rear stanchions * Combination steel wing doors at rear, 2-leaf, asymmetrically split, can be swung and locked up to 270° (not foldable), with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rod lock at rear and central lock; deactivation function for automatic tailgate opening during rear tipping with opened wing door * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed in the outer frame on each side ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting track for deployable ramps * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps integrated below the loading area in the chassis at the rear ----Tyres: * Tyre size 358/55 R 19.5 ----Painting: * Drawbar, underride guard, rear stanchion, and rear foldable support legs hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black shade * Sidewalls painted in RAL colour of choice (no special or metallic paint) – can be modified up to approx. 6 weeks before completion ----Other Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately available from calendar week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted right front of the chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks mounted at the positions of the central locking as well as 2 pieces on the front wall * Steel pallet 3-way tipper body with reinforced strong side walls (continuous side walls with internal tube reinforcement – without intermediate stakes – drop-down with board wall spring lifter) * Rear uprights bolted * Combination steel swing doors at the rear, two-leaf, asymmetrically split, pivotable and lockable at 270° – not drop-down – with additional pendulum frame for automatic rear wall opening during tipping, locking via galvanized rotary latch at the rear and central locking. Deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings each side, integrated into the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: Pedpfxox Hm Rij Alxjpu * Rear ramp rails for drive-on ramps * 1 pair of aluminium drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for the ramps integrated into the chassis under the loading bed, accessible from the rear ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear upright, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing leg painted in black tone * Side walls painted in a RAL colour of your choice (no special or metallic paint) – can be changed up to about 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery time: * Available immediately from CW 29/2026

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads Psdpfxjykx I Hs Alxspu ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks Ppedpfx Aleykx I Tsxsu * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: rabljeno, največja dovoljena obremenitev: 10.080 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, Leto izdelave: 2017, Oprema: ABS, Stock št. 5820 Müller-Mitteltal 3-stranski tandem jekleni kiper priklopnik / aluminijaste rampe / pocinkovano podvozje / široke pnevmatike! ---- * Proizvajalec: Müller-Mitteltal * Tip: KA-TA-R 13,5 * Prva registracija: 08/2017 * Skupna masa: 13.500 kg * Lastna masa po prometnem dovoljenju: 3.420 kg * Nosilnost: 10.080 kg * Osi: 2 x Gigant / bobnaste zavore * Vzmetenje: listnato vzmetenje * Pnevmatike: 385/55 R 19.5 približno 50% na jeklenih platiščih * Tehnični pregled: 08/2026 * EBS * Barva: podvozje pocinkano, kiper nadgradnja modra * Prostornina kiperske kadi: približno 6 m³ (5,00 m dolžina x 2,42 m širina x 0,50 m višina) * izvlečne aluminijaste rampe * vlečna kljuka s 50 mm ušesom, nastavljiva po višini * kiper nadgradnja s 4 pari zložljivih pritrdilnih ušes v tleh * nosilec za polno obremenitev spredaj * dodatne zložljive opore zadaj * predal za orodje iz nerjavnega jekla spredaj desno * četrtinski blatnik * certifikat za varovanje tovora Psdpfxezdm S Sj Alxepu * vozilo iz prve roke Nemški priklopnik!! Nemški dokumenti!! Prva lastništvo!! Opomba o morebitnih napakah v oglasu: Kljub skrbni pripravi oglasa lahko pride do posameznih napak v besedilu ali podatkih. Ne prevzemamo odgovornosti za napake, spremembe ali vmesno prodajo. Vse informacije so brez garancije. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali dodatna vprašanja.

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available in week 37/2026, Inquiry No.: 31941 Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) Podozbfmqepfx Alxepu * 6.27m x 2.47m platform with galvanized 400mm front wall * Hardwood excavator bucket rest screwed to the front wall * Unloaded deck height: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by retaining rods and inclined supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, perforated for lashing devices, lashing capacity per point LC 2000 daN with minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with tight cross bracing, high-web front and rear end sections and access ramp at the rear, hot-dip galvanized * 10 recessed UVV lashing rings LC 3000 daN in the existing hole matrix in the outer frame, additionally * Further lashing options via drill holes (Ø 50 mm, LC 1200 daN) in the front and end beams * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, foldable supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 LED marker light removable at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 525 Euro per month over 60 months with no down payment or final residual value ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in available

Stanje: rabljeno, največja dovoljena obremenitev: 10.960 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Nakladalna širina ca. 2.500 mm Nakladalna višina: ca. 1.100 mm Dodatne informacije - Jeklo - Vroče cinkano - Aluminijaste naletne rampe - Predal za rampe - 500 mm stranske stranice, preklopne - Vzmeti stranskih stranic Ppjdpjytma Asfx Alxju - Gigant osi - Pnevmatike 285/70R19,5 - Nastavljiv priklop po višini - Podporna noga spredaj + zadaj - Plastična orodjarnica - Vstop spredaj

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: Ppsdor Dpzuspfx Alxeu * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: Psdper Dpz Hefx Alxspu * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Now immediately available in RAL 9016 Traffic White Ppsdpfx Aleyvxg Isxou * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp