Müller Mitteltal T4 Kompakt 40,0 4 Achs Tieflader- Anhänger nakup rabljenega (43.437)

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve Hnjdpjl Tphrofx Apnsp * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: Hnedpfxsrwc R As Apnjp * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: Hnsdpfx Apjv D Tcbjnop * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) Hnodpeykx I Hefx Apnsp * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: Hodpfjykx I Tox Apnsnp * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available in week 37/2026, Inquiry No.: 31941 Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Hardwood excavator bucket rest screwed to the front wall * Unloaded deck height: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by retaining rods and inclined supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, perforated for lashing devices, lashing capacity per point LC 2000 daN with minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with tight cross bracing, high-web front and rear end sections and access ramp at the rear, hot-dip galvanized * 10 recessed UVV lashing rings LC 3000 daN in the existing hole matrix in the outer frame, additionally * Further lashing options via drill holes (Ø 50 mm, LC 1200 daN) in the front and end beams * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, foldable supports at the rear Hsdpezbfmqofx Apnonp * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 LED marker light removable at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 525 Euro per month over 60 months with no down payment or final residual value ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in available

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal nizkopodna prikolica z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe * Povečanje vertikalne obremenitve sedla iz 12 t na 18 t vklj. Montiran sedelni zatič v: drugi poziciji sedelnega zatiča 2", sedelni zatič do vključno krivljenja 2.750 mm. Zadnji polmer zasuka ca. 2.400 mm v svetli odprtini (priporočamo prosti prostor min. 150 mm). Sprednji polmer zasuka 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Dovolj prostora do vlečnega vozila mora zagotoviti stranka. * Izvlečni deli za vdolbine za kolesa spredaj in zadaj spodaj (205 mm globoko). 6 kos desk za vdolbine za kolesa z nosilcem kot ležišče v skladu s kodo 09.112 ALU-tlačni zračni rezervoar namesto jeklenega * Smartboard upravljalna omarica kot infotool nameščena na prikolici z tlačnimi senzorji za prikaz skupne obremenjenosti osi. Prikaz možen na upravljalni omarici ali v tovornjaku preko EBS-zračnega vzmetenja (odvisno od proizvajalca tovornjaka) * ?SP-kombi paket: Orodjarna z 45° vogali iz pocinkanega jekla, dodatno prašno lakirana v RAL 9006 bela aluminij, na sedlarski platformi B=2.480 x V=500 mm z zgornjim preklopnim pokrovom, stranskimi vrati in poševno. ALU stranske stene zložljive na sedlarsko platformo (500 mm visoko), ALU zadnja stena vstavna (150 mm visoko), notranje in zunanje ALU stranice lakirane v RAL 9006 bela aluminij. Vklj. zložljivi & snemljivi zadnji stebri, pocinkani (brez zaključnega premaza). Vključuje vijačeno sprednjo konstrukcijo. Dolžina sprednjega okvirja do krivljenja 3.935 mm Sprednji polmer zasuka, brez rezervnega kolesa z dimenzijo krivljenja 2.450 mm oz. 2.750 mm ca. 1.750 oz. ca. 1.480 mm * 2 kosa ležišč za fiksiranje kontejnerjev, vgrajeni v sprednji okvir Hnedoy R Ipuspfx Apnop * 3 ležišča pod sedlarsko platformo za shranjevanje izbirnih ALU ramp ali lesenih desk za prekrivanje vdolbin za kolesa * Zložljivo/izvlečno konzolo (pocinkana) in lesene deske za širitev vklj. (ne na zadnji poševnini), nosilec desk na sedlarski platformi (največja širina tovora največ 2.500 mm) * Druga LED pozicijska luč v opozorilnem paketu spredaj in zadaj (dvojna osvetlitev), le v povezavi z opozorilnim paketom * 2 LED vzvratni žarometi na zadnji strani prikolice, prižgana v vzvratni prestavi (primerno za 12 V in 24 V), največ 2 dodatna kosa dovoljena * 7-polna vtičnica na zadnji strani, vezana za razsvetljavo za prekomerno dolžino z zadnjo lučjo (58 R) in maso * Gumijasta prevleka na nakladalni rampi levo in desno (ca. 860 mm dolžine) 190 07644 gumijasti trakovi, na notranji deski enodelnih ramp * Popolnoma avtomatski centralni sistem mazanja s črpalko (24V), rezervoarjem za mast ter integriranim upravljanjem prikolice, brez priklopa ramp (pri krmiljenju: vključno s priklopom razdelilnika na sedlarsko platformo). Opomba: Možno izključno za vlečna vozila z 24V razsvetljavo! Vmesna prodaja in napake pridržane! Prodaja izključno po naših Splošnih pogojih poslovanja. Pomembno obvestilo – Pomembna informacija: Kljub natančnemu preverjanju vseh podrobnosti v naši ponudbi se lahko pojavijo napake, ki so posledica prenosa med različnimi platformami. Zato opozarjamo, da so vse informacije brez garancije in ne predstavljajo pravne zahteve. Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB, ampak informacijo za pripravo pogodbe. Tukaj navedeni podatki so brez garancije in ne predstavljajo zagotovljenih lastnosti.

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood Hsdoxmpykjpfx Apnonp * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear Hnjdoxmpydspfx Apnop * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2018, skupna dolžina: 11.830 mm, skupna širina: 2.550 mm, skupna višina: 3.720 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2018, Oprema: ABS, dvižna zadnja plošča, = Dodatne možnosti in dodatna oprema = - EBS - Hidravlični sistem - Nakladalna rampa = Opombe = Število osi: 4, lastna teža: 9900 kg, bruto teža: 40000 kg, vrsta podvozja: Celotno podvozje, material podvozja: jeklo, vrsta vzmetenja: zračno vzmetenje, ABS, EBS, hidravlični sistem, leto izdelave nadstavka: 2018, material nadstavka: jeklo, rampe: hidravlično upravljane, vrsta osi: BPW, nakladalna rampa, izvedba nakladalne rampe: zadnja vrata, material nakladalne rampe: jeklo, JAMICA ZA KOLESA / DVOJNA HIDRAVLIČNA RAMPA / 40T TEHNIČNE LASTNOSTI / POCINKANO / MOŽNOST POPRAVILA = Dodatne informacije = Splošne informacije Kabina: dnevna Registrska tablica: KLEYN1 Pogonski sistem Vrsta goriva: dizel Menjalnik Menjalnik: ročni Konfiguracija osi Velikost pnevmatik: 235/75R17,5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Os 1: dvojne pnevmatike; krmilna os; profil pnevmatik na notranji strani leve: 10 mm; profil pnevmatik na zunanji strani leve: 10 mm; profil pnevmatik na notranji strani desne: 11 mm; profil pnevmatik na zunanji strani desne: 10 mm Os 2: dvojne pnevmatike; profil pnevmatik na notranji strani leve: 8 mm; profil pnevmatik na zunanji strani leve: 7 mm; profil pnevmatik na notranji strani desne: 7 mm; profil pnevmatik na zunanji strani desne: 7 mm Os 3: dvojne pnevmatike; profil pnevmatik na notranji strani leve: 7 mm; profil pnevmatik na zunanji strani leve: 7 mm; profil pnevmatik na notranji strani desne: 10 mm; profil pnevmatik na zunanji strani desne: 10 mm Os 4: dvojne pnevmatike; profil pnevmatik na notranji strani leve: 7 mm; profil pnevmatik na zunanji strani leve: 6 mm; profil pnevmatik na notranji strani desne: 4 mm; profil pnevmatik na zunanji strani desne: 6 mm Teže Lastna teža: 9.900 kg Nosilnost: 30.100 kg GVW: 40.000 kg Funkcionalnost Nakladalna rampa: zadnja vrata Višina nakladalne površine: 89 cm Okolje Emisijski razred: Euro 0 Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Poškodbe: nobene Hjdpfjyqp Tmex Apnsnp Finančne informacije Cena lizinga: 678 € na mesec (privzeto, 60 mesecev); za več informacij in pogojev se obrnite na nas. = Podatki o podjetju = Kleyn Trucks je eno od največjih neodvisnih podjetij za trgovanje z rabljenimi vozili na svetu. Tukaj lahko izbirate med stalno spreminjajočo se ponudbo 1200 rabljenih tovornih vozil, vlečnih enot in priklopnikov. Naša ponudba vključuje vse evropske znamke različnih letnikov in cenovnih razredov. Zakaj kupovati pri Kleyn Trucks? Preprosto! • Velika in hitro spreminjajoča se ponudba • Prepoznavna kakovost • Dobra cena • Pristojno poslovanje • Govorimo več jezikov • Razumemo naše stranke • Podpora pri uvozu in transportu • (Izvozna) registracija se hitro uredi • Strokovne tehnične storitve • Zagotovljena "prepoznavna kakovost" • In še več.... Za posebne ponudbe in celoten inventar obiščite našo spletno stran: Lizing pri Kleyn Trucks je mogoč v večini evropskih držav! Hitro izračunajte mesečni znesek lizinga in pošljite povpraševanje preko naše spletne strani. Za več informacij o našem evropskem garancijskem paketu se obrnite na nas.

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, Zračno vzmetenje z možnostjo dviga in spusta, Tehtnice za obremenitev osi, Skupna dolžina nakladalne površine pribl.: 9.100 mm, Globoka postelja pribl.: 6.900 mm dolga, Višina nakladanja pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za kolike v zunanjem okviru, Plezalna letvica na zunanji strani ramp in zadnje poševnine, Dvodelne nakladalne rampe (pribl. 4.300 x 750 mm), Nakladalne rampe nastavljive vstran, Lesena tla debeline 68 mm, Skladiščna škatla s pokrovom za verige ali pritrdilne pasove, Označevanje obrisa po predpisih, Opozorilna rotacijska luč, Pomožna parkirna zavora z vzmetjo, Vklj. prikaz obremenitve osi, Vozilo pocinkano v potopni kopeli, Doplačilo za: Hidravlični premik ramp = cena: 1.000 €, -- Možne tiskarske napake, spremembe in napake so pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti na: ! Hodpfxozl Tzco Apnonp

Stanje: novo, lastna masa: 10.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 para odstavkov za kolesa s pokrovom, ABS, zračno vzmetenje s funkcijo dviga in spuščanja, tehtnice za osne obremenitve, skupna dolžina nakladalne površine pribl.: 10.250 mm, nizka postelja pribl.: 7.150 mm dolžine, višina nakladanja z obremenitvijo pribl. 890 mm, 24 pritrdilnih ušes po 10 t, 40 pritrdilnih ušes po 3 t, naletne rampe (pribl. 3.100 x 760 mm), protidrsni trak na zunanji strani ramp in zadnjem naklonu, stransko nastavljive rampe, lesena tla debeline 68 mm, shranjevalna škatla s pokrovom za verige ali napenjalne trakove, označevanje obrisa po predpisih, rotacijska luč, parkirna zavora s prenosom vzmeti, vključuje prikazovalnike osnih obremenitev, vozilo vroče pocinkano s potopno metodo, dodatno: hidravlično premikanje ramp = cena: 1.000 €; -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, slikovni material je informativne narave --, Več podatkov na: !, Dodatne podrobnosti: ! Hedpfszl Tx Iex Apnsnp

Stanje: novo, lastna masa: 9.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Air suspension with lift and lower function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, drive-on ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, spring-applied parking brake, incl. axle load displays, vehicle hot-dip galvanized, surcharge for: hydraulic ramp shifting = Price: €1,000, -- Subject to errors, misprints and changes, sample images --, More data at: !, More details: ! Hjdpfjzl Txbox Apnsnp

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigom in spustom, tehtnice za obremenitev osi, skupna dolžina nakladalne površine pribl. 9.100 mm, nizka postelja pribl. 6.900 mm dolžine, nakladalna višina pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za stebričke v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 760 mm), protidrsna letev na zunanji strani ramp in zadnjem nagibu, rampe bočno nastavljive, lesen pod 68 mm debeline, škatla z pokrovom za verige ali privezne pasove, obrisna označitev po predpisih, rotacijska luč, parkirna zavora s tlačno vzmetjo, vklj. z indikatorji obremenitve osi, vozilo vroče cinkano s potapljanjem, doplačilo za: hidravlično premikanje ramp = cena: 1.000 €, -- Pridržujemo si pravico do napak v tisku, sprememb in zamenjav, primer slike --, Več podatkov na: !, Več informacij na: ! Hnsdpfxozl Rnmj Apnjp

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigovanjem in spuščanjem, tehtnice za obremenitev osi, skupna dolžina tovorne površine ca: 9.100 mm, nizko ležišče ca: 6.900 mm dolgo, nakladalna višina obtežena ca. 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okvirju, nakladalne rampe (ca. 3.100 x 760 mm), stopničasta letev na zunanji strani ramp in zadnjega naklona, rampe bočno nastavljive, lesena tla debeline 68 mm, skladiščna škatla z pokrovom za pritrdilne verige ali pasove, označba obrisa po predpisih, rotacijska opozorilna luč, zavorni sistem s federnim pomnilnikom, vklj. z indikatorji obremenitev osi, vozilo vroče pocinkano v potopni kopeli, doplačilo za: hidravlično pomikanje ramp = cena: 1.000 €, -- napake v tisku, pomote in spremembe pridržane, slike so simbolične --, Več podatkov na: !, More Details: ! Hodpfjzl Rlxjx Apnjnp

Stanje: novo, lastna masa: 10.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 para niš za kolesa z zaščitnimi pokrovi, ABS, zračna vzmet z možnostjo dviganja in spuščanja, skupna dolžina tovorne površine približno 10.250 mm, dolžina nizke platforme približno 7.150 mm, višina tovorne površine pri obremenitvi približno 890 mm, 24 x pritrdilne točke, vsaka do 10 t, 40 x pritrdilne točke, vsaka do 3 t, dvižne rampe (približno 3.100 x 760 mm), oprijemna letva na zunanji strani rampe in zadnje poševnine, dvižne rampe, nastavljive v smeri strani, lesena plošča debeline 68 mm, škatla za shranjevanje z zatesnilom za pritrdilne verige ali traкове, označitev obrisa v skladu s predpisi, rotacijska luč, parkirna zavora s pomnilnikom vzmeti, vključno z indikatorjem osne obremenitve, vozilo vroče pocinkano, dodatno plačilo za: hidravlično premikanje ramp = cena: 1.000 €, -- tiskarske napake, napake in spremembe so lahko prisotne, primerne slike –, več podatkov na: !, Več podrobnosti: ! Hnodpfozlxr Tox Apnjp

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigom in spustom, tehtnice za obremenitev osi, skupna dolžina nakladalne površine cca: 9.100 mm, globoko ležišče cca: 6.900 mm dolgo, nakladalna višina obremenjena cca 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okviru, plezalna letev na zunanji strani ramp in zadnjega naklona, nakladalne rampe (pribl. 3.100 x 760 mm), rampe bočno nastavljive, lesena tla debeline 68 mm, zaboji z pokrovom za pritrdilne verige ali napenjalne trakove, konturirana označitev po predpisih, opozorilna luč, parkirna zavora s shranjevalnim vzmetjo, vključuje prikazovalnike obremenitve osi, vozilo vroče pocinkano s potopno kopeljo, doplačilo za: hidravlični premik ramp = cena: 1.000 €, -- Možne tiskarske napake, spremembe in napake pridržane, slike so simbolične --, Več podatkov na: !, Več podrobnosti na: ! Hnjdpfx Aszln D Sepnep

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigovanjem in spuščanjem, tehtnice za obremenitev osi, skupna dolžina tovorne površine ca: 9.100 mm, nizko ležišče ca: 6.900 mm dolgo, nakladalna višina obtežena ca. 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okvirju, nakladalne rampe (ca. 3.100 x 760 mm), stopničasta letev na zunanji strani ramp in zadnjega naklona, rampe bočno nastavljive, lesena tla debeline 68 mm, skladiščna škatla z pokrovom za pritrdilne verige ali pasove, označba obrisa po predpisih, rotacijska opozorilna luč, zavorni sistem s federnim pomnilnikom, vklj. z indikatorji obremenitev osi, vozilo vroče pocinkano v potopni kopeli, doplačilo za: hidravlično pomikanje ramp = cena: 1.000 €, -- napake v tisku, pomote in spremembe pridržane, slike so simbolične --, Več podatkov na: !, More Details: ! Hnjdpfx Aozldbyspnep

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigom in spustom, tehtnice za obremenitev osi, skupna dolžina nakladalne površine pribl. 9.100 mm, nizka postelja pribl. 6.900 mm dolžine, nakladalna višina pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za stebričke v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 760 mm), protidrsna letev na zunanji strani ramp in zadnjem nagibu, rampe bočno nastavljive, lesen pod 68 mm debeline, škatla z pokrovom za verige ali privezne pasove, obrisna označitev po predpisih, rotacijska luč, parkirna zavora s tlačno vzmetjo, vklj. z indikatorji obremenitve osi, vozilo vroče cinkano s potapljanjem, doplačilo za: hidravlično premikanje ramp = cena: 1.000 €, -- Pridržujemo si pravico do napak v tisku, sprememb in zamenjav, primer slike --, Več podatkov na: !, Več informacij na: ! Hodpfx Apozldbtensnp

Stanje: rabljeno, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2010, naslednji pregled (TÜV): 11/2025, * SAF osi * Kolesne poglobitve * 4 osi * Hidravlične nakladalne rampe * Vlečna zanka 50 mm Hnjdpfx Aevav U Sepnep * Lastna teža: 9.650 kg * Skupna dovoljena teža: 24.000 kg * TÜV: 11.2025 * Tehnični pregled: 05.2025 -----Interna številka vozila: 10093----Pridržujemo si pravico do napak in vmesne prodaje. Podpora prek WhatsApp-a na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsApp-a. Whatsapp Whatsapp

Stanje: rabljeno, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2016, naslednji pregled (TÜV): 11/2025, * SAF osi * Kolesne poglobitve * 4 osi * Hidravlične nakladalne rampe * Vlečni obroč 50 mm * Lastna teža: 9.460 kg * Skupna dovoljena teža: 24.000 kg * TÜV: 11.2025 * Tehnični pregled: 05.2025 -----Interna številka vozila: 10091-----Pridržujemo si pravico do napak in vmesne prodaje. Hsdpfxsvawacs Apnjnp Podpora prek WhatsApp na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsApp. Whatsapp Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 18.150 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * 5-komorne zadnje luči * Duomatik zračni priključek * Gigant osi * Zadnja podpora ----Nadgradnja: Nizkopodna prikolica (1800+6500mm)/Višina nalaganja cca 920mm, zadaj poševna/Višina ramp cca 770mm, jeklena/lesena tla, hidravlične nakladalne rampe (pocinkane), nosilnost 15.000 kg/rampa, pritrdilni obroči + pritrdilne točke Hjdpfxezaln Ss Apnenp Prodaja samo pravnim osebam. PRI IZVOZU JE POTREBNO PLAČATI SAMO NETO CENO!!!!! VSE INFORMACIJE SO BREZ JAMSTVA OPA. OPREMA + DODATKI. Osnova vseh kupoprodajnih pogodb, računov, predračunov, naročil, pogajanj so naši Splošni pogoji (glej impresum).

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 36.000 kg, prva registracija: 06/2018, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * Sprednji podporni vitel * Zadnja podpora * Krmiljena os * BPW ECO-Plus osi ---- Nadgradnja: Polpriklopnik z nizko nakladalno ploščadjo (5.150+7.950 mm), višina nakladanja pribl. 850 mm, zadaj poševen, višina nakladalne rampe pribl. 700 mm, jeklena/lesena tla, pritrditveni obroči, hidravlične nakladalne rampe, tudi hidravlično pomične v stran, hidravlična zadnja podpora. ---- 3. os sledilna krmiljena os Hnsdpfx Aezhyuhopnop Prodaja samo pravnim osebam. PRI IZVOZU SE PLAČA SAMO NETO CENA!!!!! VSE INFORMACIJE SO BREZ JAMSTVA VČ. OPREME IN DODATKOV. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte tudi impresum).

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Hnodeywvhrepfx Apnsp

Stanje: rabljeno, največja dovoljena obremenitev: 5.900 kg, skupna masa: 9.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2020, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 5 m³, Oprema: ABS, * ABS * 5-komorna zadnja svetla Hodpfjyncyhex Apnjnp * Podesivi vučni uređaj po visini * Gigant osovine * Prednji oslonac na navijanje ----Nadgradnja: Niskopodni prikolica, približna visina utovara 870 mm, zadnji deo zakošen, visina uspona približno 780 mm, opružno rasterećene čelične stranice levo i desno, drveno dno, prstenovi i ušice za vezivanje. Opružno rasterećene i bočno pomične rampe za uspon sa vatrootpornim i protivkliznim rešetkastim prečkama od pocinkovanog čelika (dužina cca 2.600 mm), automatska zadnja podrška povezana s upravljanjem rampama, plastična kutija za alat ispred prednjeg zida. Šasija/prednji zid/vučno vratilo/zadnji zid/rampe i stubići pocinkovani. Prodaja isključivo pravnim licima. KOD IZVOZA SE PLAĆA SAMO CENA BEZ PDV-A!!!!! SVE INFORMACIJE BEZ GARANCIJE, POSEBNO OPREMA I DODACI. Osnov za sve kupoprodajne ugovore, fakture, profakture, narudžbine i prodajne razgovore su naši Opšti uslovi poslovanja (vidi Impressum).