Kaessbohrer3 KONTENERSKO PODVOZJE, MULTIFUNKCIONALNO, VSE PRIKLJUČKE, DVIGNJENA OS

Kässbohrer 3 AS CONTAINERCHASSIS, MULTI FUNCTIONAL ALL CON...

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2024, vzmetenje: zrak, velikost pnevmatike: 385/55/22.5, barva: drugo, Leto izdelave: 2024, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Zračna vzmetenje Bdsdpfx Aoz Dpkujm Usi = Dodatne informacije = Mere pnevmatik: 385/55/22.5 Zavore: diskovne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvižna os Lastna masa: 5.450 kg Dovoljena nosilnost: 37.550 kg Maksimalna dovoljena masa: 43.000 kg Poškodbe: nobene Registrska številka: OV-48-HS

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Bjdpfx Ameizu Nte Uedi Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs Bdsdpfeiu Er Aex Am Uoi - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, prevoženi kilometri: 4 km, moč: 355 kW (482,67 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Equipment: * FAN XG 480 Multi-Swap System 1120-1320 with tail lift * Chassis front execution: Aero floor plate * Air-suspended cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remotes * Windscreen with sun protection film * External sun visor * Two LED headlights for cab rear wall * Reversing camera with pre-installation for 2nd camera * DAF Corner View * Handle, trim and side wall: cab color * LED headlights, cornering and fog lights * Fixed cab entry * XG cab * LED skylights * LED daytime running lights * Adjustable roof spoiler for XG cab * Lower cab step: Crystal White * Storage housing black for cab color Crystal White * Chassis color anthracite grey * CRYSTAL WHITE * Headlight frame color: Crystal White * Bumper color: Crystal White * Roof spoiler color: Crystal White * Electrically operated roof hatch * Integrated stationary air conditioning * Driver's seat: Luxury Air * Preparation for compressed air device * Passenger seat: cinema and table, fabric cover * Driver's seat with swivel base * Xtra Comfort mattress for lower sleeping bunk * Upper bunk Bsdpfxjy A Uvfe Am Uodi * Automatic cab climate control * Refrigerator and drawer * Armrests on both sides of the driver's seat * Storage compartment with drawer in center console * LED interior lighting: luxury * ECAS remote control with extended functions * Interior trim color scheme: Exclusive * Dashboard table * Steering wheel with silver accents * Cab, interior decoration: hexagon * Safety net at both bunks * Curtains, without partition curtain * Dashboard execution: plateau * Stationary heater with heat pump and timer * Wireless charger * Speakers: Exclusive * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * PACCAR Connect with navigation * Antennas: radio, 2x mobile, GNSS Extra: CB * FMS connector, extended and pre-installed * Infotainment including DAF Truck Navigation * Adaptive Cruise Control with FCW and AEBS-3 * Predictive Cruise Control * Preparation for toll system * Driver Performance Assistant * Reversing warning system * Lane change warning system * Start Assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Standard immobilizer * Automatic operation of lifting device * Front air suspension: medium * Front: 8.00 t, air suspension, 161 N * Rear axle load capacity 13.00 t * Trailing axle load 8.0 t * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Lifting device * Rear: 20.00 t, air suspension, SR1344 * Continental * F1,315/70R22.5CGW CEPS5 158/150 L Steering ABA 3P * R1,315/70R22.5CGW CEPD5 154/150 L Traction ACA 3P * R2,315/70R22.5CGW CEPS5 158/150 L Steering ABA 3P * Silver-grey wheel trim rings * Tire pressure monitoring system * Steel disc wheels, silver-grey * Urge-to-move * Mechanical differential lock * Traction aid 15.0 t * MX-13 engine, 355kW/483HP, cab badge: 480 * Emissions standard Euro 6 * Standard transport, full version * Eco-Fuel * Idle cutoff automatic, 5 minutes * Automated gearbox, TraXon, 12-speed * Automated transmission with manual mode – full version * Rear axle ratio 2.21 * Traction control (ASR) * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 * ZF Intarder * 2-cylinder compressor with clutch * Rear drive axle with disc brakes * Pneumatic control for parking brake * Wheels

Stanje: novo, Leto izdelave: 2023, Oprema: pogon na vsa štiri kolesa, Haulotte Compact 10DX - New Unit Delivery time: on request Colour: Haulotte Standard (RAL1006) Delivery to your desired address is possible. Working height: 10.28 m Platform height: 8.28 m Maximum load capacity: 565 kg Platform length: 2.45 m Platform length with extension: 3.7 m Platform extension: 1.2 m Platform width: 1.45 m Transport height: 1.59 m Height (stowed): 2.44 m Width: 1.78 m Length: 3.17 m Wheelbase: 1.84 m Standard Features: * All-wheel drive, steerable front wheels * Drive motor lockout * Foam-filled all-terrain tyres * One-sided 1.2 m platform extension * Removable control panel on platform * 3° tilt sensor * Automatic outrigger levelling * Horn * Hour meter * 12 V 74 Ah batteries * Hydraulic brakes * Manual emergency lowering feature * Anchorage points for fall protection * Towing and crane lugs * Side guards Optional Equipment: Bsdpemv Natefx Am Ujdi * Non-marking tyres * Power outlet on work platform * Swing gate * Hydraulic generator 3.5 kW * Biodegradable hydraulic oil * Cold climate kit * Prepared for tracking system* * Reversing acoustic alarm * Drive warning signal * Rotating beacon * Work lights * Foldable guardrail* * Custom colours (RAL) *Factory fit only; not retrofittable on stock units. 24 months manufacturer’s warranty on labour and spare parts.