Priklopnik sedeža z delovno ploščadjo

ES-GE 3-Achs Sattelanhänger - Rungen + CV

You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website.

Excerpt from equipment list. Full equipment details available on request.
Hodpfezahp Esx Alnsn

Chassis:
* Welded construction made from high-quality steel profiles with through cross-members, designed for high point loads
* Underride guard nose, approx. 700 mm wide
* Outer frame as UNP profile
* Wear plate approx. 8 mm
* Neck height at front approx. 130 mm
* Coupling device with 2-inch kingpin
* Bolted underrun protection according to EU standards
* Lateral protection according to EU standards, made from anodized aluminum profiles
* Landing legs 2 x 12 t
* Landing legs with compensating feet and one-sided operation on right side (travel direction)
* Axles: 3 x 9 t air suspension axle unit
* Disc brakes 22.5, total stroke approx. 180 mm
* Lifting and lowering device via rotary slide valve

Brake system:
* Two-line compressed air brake system according to EU standards with EBS and RSS, automatic load-dependent control
* Spring-loaded cylinders as parking brake
* Anti-swapping coupling heads fixed on front crossmember; no connecting line to the truck

Tyres:
* 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand at our discretion
* Tyre pressure monitoring (TPMS) via EBS CAN bus system

Load securing:
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t
* In the outer frame, holes approx. every 400–600 mm for attaching tension straps

Front wall:
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor recessed into outer frame with galvanized omega steel profiles

Lighting system:
* According to EU standards, 24 volts, with multi-chamber lights
* LED side marker lights
* LED position lights, white front
* LED outline marker lights rear
* Licence plate lights
* Lane keeping lights LED
* 1x15- and 2x7-pin plug connections on the front crossmember

Equipment:
* 2 wheel chocks with brackets
* Warning signs ECE 70
* Bracket for rotating beacon including beacon
* 2 rubber bumpers at rear
* Folding and extendable ladder at rear right (without platform)
* 1 open box made of perforated sheet, crosswise to driving direction, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles

Paintwork:
* Front wall: RAL 3002 carmine red
* Chassis: Hot-dip galvanized
* Outer frame: hot-dip galvanized + RAL 3002 carmine red
* SSV: aluminum anodized
* Underrun protection: white (RAL 9016 traffic white)
* Mounted parts: galvanized/KTL black
* Rims: silver

Including special equipment:
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading area
* 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm
* Magazine inside front wall for 20 plug-in stakes
* Container locks for 1 x 40' and 2 x 20' containers, flush with rear
* Container locks for 1 x 20' container, centrally positioned
* Work lights on lamp bracket (activated via reverse gear)
* 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each left and right

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.