Stolpni žerjav

Faun MTC AF 38 6x4x6 - 38m Max radius boom / Auslege...

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 71.861 km, vrsta goriva: dizel, barva: drugo, konfiguracija osi: 6x4, prva registracija: 03/2008, emisijski razred: euro2, Leto izdelave: 2008, obratovalne ure: 9.086 h, = Dodatne možnosti in oprema = - 3 osi = Opombe = Stanje Prenovljeno: × CE-tip: CE, EPA, TÜV = Dodatne informacije = Tehnične informacije Število valjev: 6 Pogon: kolesni Tip motorja: MERCEDES-BENZ OM926LA (Euro 2), ~240 kW (326 KM). Teže Lastna teža: 35.880 kg Nosilnost: 120 kg Dovoljena skupna masa: 36.000 kg Funkcionalno Dolžina zgornje roke: 38 m CE oznaka: da Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): potrjen do 12.2026 Tehnično stanje: zelo dobro Optično stanje: zelo dobro Identifikacija Gbodsy Rh Taspfx Akqsr Registrska številka: 1VKP472

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm Gbsdpfxek Af Svj Akqjr - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 71.861 km, vrsta goriva: dizel, barva: drugo, konfiguracija osi: 6x4, prva registracija: 03/2008, emisijski razred: euro2, Leto izdelave: 2008, obratovalne ure: 9.086 h, = Dodatne možnosti in oprema = - 3 osi = Opombe = Stanje Prenovljeno: × CE-tip: CE, EPA, TÜV = Dodatne informacije = Tehnične informacije Število valjev: 6 Pogon: kolesni Tip motorja: MERCEDES-BENZ OM926LA (Euro 2), ~240 kW (326 KM). Teže Lastna teža: 35.880 kg Nosilnost: 120 kg Dovoljena skupna masa: 36.000 kg Funkcionalno Dolžina zgornje roke: 38 m CE oznaka: da Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): potrjen do 12.2026 Tehnično stanje: zelo dobro Optično stanje: zelo dobro Identifikacija Gsdpfsy Rh Tgjx Akqsbr Registrska številka: 1VKP472

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish Gbodorgzv Nspfx Akqsr * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, Leto izdelave: 1987, Liebherr 35 K stationary crane with transport axles, in very good condition. Gbedpfx Aopbvn Nekqor

Stanje: rabljeno, številka stroja/vozila: WDB9506042L758582, prevoženi kilometri: 250.500 km, moč: 213 kW (289,60 KM), prva registracija: 01/2013, velikost pnevmatike: 315/80 R22.5, konfiguracija osi: 6x2, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, število prestav: 8, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, skupna dolžina: 10.200 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, dolžina tovornega prostora: 6.350 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2013, Oprema: žerjav, = Additional options and accessories = - Lock = Notes = Cab Gbedpfx Akju H H Rneqsr Right-hand drive: ✓ Chassis Chassis height: 100 cm Wheelbase: 490 cm (1-2) 135 cm (2-3) Fuel tank capacity: 350 L Body Box opening: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 2 Number of stabilizer legs: 2 Remote control: ✓ Rotator: ✓ Squeeze Box: ✓ Maximum crane lifting capacity: 1,325 kg Maximum crane outreach: 7.90 m = More information = Axle configuration Tire size: 315/80 R22.5 Axle 1: Steering; tire tread left: 70%; tire tread right: 75%; suspension: leaf suspension Axle 2: Twin tires; tire tread outer left: 65%; tire tread outer right: 50%; suspension: air suspension Axle 3: Lift axle; tire tread left: 60%; tire tread right: 60%; suspension: air suspension Weights Unladen weight: 11,240 kg Payload: 13,760 kg gross vehicle weight: 25,000 kg Functional Crane: Fassi F110, year of manufacture 2013, mounted at rear of chassis Platform height: 130 cm Identification Registration number: PJ13CVH = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, moč: 74,5 kW (101,29 KM), vrsta goriva: dizel, barva: rdeča, dvižna moč: 4 kg/m, dvižna višina: 14.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2007, obratovalne ure: 1.048 h, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1440 SLT ULTRA TURBO Series III-E2 - 4x4x4, first delivered: 2008, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS – QUICK COUPLER, AUXILIARY HYDRAULICS, LOAD PROTECTION GUARD, 4-cylinder PERKINS TURBO diesel engine (101.32 hp / 74.50 kW at 2,200 rpm), RADIO REMOTE CONTROL, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x / WIDE DESIGN), SIDE SHIFT - LEVELLING, OVERLOAD PROTECTION DEVICE, spacious cab (coloured glass), comfort seat, ROPS / FOPS, road lighting, WORK LIGHTS (front/rear), WARNING BEACON, exterior mirrors (2x), windscreen wipers (2x), heating / ventilation, trailer coupling, lashing and transport points. Tyres: BKT OFF-ROAD TYRES (15.5/80 – 24) – approx. 98% all round. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without forks), width: approx. 2,440 mm, height: approx. 2,560 mm. Price is net export; for domestic sales, VAT applies. Financing possible / low-cost worldwide transport / for export sales, only the net price is payable. Godpfx Akouiyqdsqobr

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1: Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data apply only when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on load diagram / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Overall length of combination: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered Gjdpfx Aowg N N Iskqobr Flatbed 14,400 mm (external beams), single telescopic with separating point Length x width: 7,000 mm x 2,750 mm Telescopic extension by / to max. 3,400 mm / 10,400 mm Deck height: 300 mm Plus 4,000 mm extension beam included Loaded loading height: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Stanje: novo, lastna masa: 1.185 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.340 mm, širina tovornega prostora: 1.780 mm, višina nakladalnega prostora: 2.120 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 175/75R16C, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2025, Ifor Williams TA510G 14x7 RD Godpfxox Sypvs Akqsbr ► Prikolica za živino ► 434x178x212 cm (DxŠxV) ► Skupna/prazna teža: 3500 / cca 1185 kg ► Dvodelna dostopna vrata spredaj, levo ► Stranske zračne lopute ► Pogonska pregrada ► Pnevmatike 175/75R16C ► Kombinacija rampe in vrat ► LED osvetlitev Dodatki, vključeni v ceno: ► Vetrobranski usmerjevalnik/spojler ► Razdelilne letve, spodnje zračne lopute ► Prečna pregrada Napake v opisu in ceni kljub natančnemu pregledu niso izključene, zato podatki o ceni, merah, teži in opisu niso zavezujoči.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 16.300 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2018, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, barva: zelen, Oprema: ABS, EBS (Elektronski zavorni sistem), - 5 osi: 1. os vodena s trenjem in dvižna; 2.-5. os hidravlično vodene - Raztegljivo: 6.200 mm (skupna dolžina: 12.800 mm - 19.000 mm) - SAF osi - Premične hidravlične dvojne rampe z nosilnimi nogami Gjdpfx Ajymnmwekqobr - Dvižni in spustni sistem - Bobnaste zavore - Vzmetenje: zračno-lift Pridržujemo si pravico do napak