Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX110 Semi-Tieflader

Stanje: novo, največja dovoljena obremenitev: 45.820 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt of features. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of externally foldable lashing rings (LC 5,000 daN) Gisdpfx Ajxbmpfodgsr * 3 pairs of externally foldable lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the platform for fastening straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, with chequer plate above the axles Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Tyres: * Tyre size 245/70 R 17.5 3PMSF, load index (146/146 F) * Brand at our discretion * TPMS tyre pressure monitoring system as per ECE R 141 * Data transmission to truck tractor via standardized EBS interface according to ISO 11992 * For correct display, the tractor must support the transmission and display of this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Braking system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M) without connections to the tractor unit Paintwork: * Complete steel structure, automatically shot-blasted after welding using a turbine system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 coats of 2K topcoat, solid colour in RAL 3002 Carmine Red as per RAL System 841GL * Wheels in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * No metallic paint available * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin. Connections in accordance with ISO: * 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connector rail * Electro-hydraulic power pack * Remote steering of axles from the front and rear via cable remote control with push buttons, single-track alignment control (no installation in the tractor unit) * Galvanized folding supports under the rear slope of the loading platform * 1 pair of recessed lashing rings along the central beam at the rear in the sloped section (LC 10,000 daN) * On the gooseneck, plug-in aluminium side and rear panels, approx. 2,440 x 400 mm (L x H) * Rear removable galvanized stanchions (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the sloped gooseneck section * 3 pairs of WADER container pockets in loading area for a 20' (30?) or

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Gijdpfow Tprzsx Adgor Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red Giedpev Etx Ejfx Adgjr * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)