Teleskopski nakladalnik

Merlo TF 30.7

Operating hours: 150

Maximum lifting capacity: 3,000 kg

Maximum lifting height: 6,700 mm

Maximum outreach: 3,800 mm

Length to tool carrier: 4,510 mm

Width: 2,000 mm

Height: 2,120 mm

Total weight with pallet forks: 6,620 kg

Total weight without pallet forks: 6,450 kg

Engine
4-cylinder Deutz TCD 2.9
2.9 L displacement, water-cooled
Power: 75 kW (101 HP)
2,600 rpm
Stage V
Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR)
Hydrostatic drive
Pump: electronically controlled with variable flow rate
Motor: variable displacement motor
EPD PLUS incl., with optional automatic engine speed increase
Mineral hydraulic oil HVI 46

Transmission
2 gears
Electrohydraulically controlled
Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h

Cab
Enclosed cab, split door
360° panoramic visibility
GRAMMER air-suspended seat with lap safety belt
ROPS/FPOS-approved
Heating
Front, roof, and rear window wipers
Sun blind
4x1 joystick, electronically controlled with capacitive release incl. direction selector

Telescopic boom
2-section with electronic end position damping (Soft Stop)

Tool carrier
Quick coupling system type "ZM2", hydraulically operated from the cab

Steering
Hydraulic steering
3 steering modes: all-wheel, front-wheel, crab steering

Drive
Permanent all-wheel drive

Axles
Front axle fixed
Rear axle oscillating

Braking system
Power-assisted disc brakes on all four drive shafts
Automatically applied parking brake when engine is off

Hydraulic system
Variable displacement pump, "LOAD SENSING" type
Total output: 100 l/min
Working pressure: 250 bar
Flow-sharing control valve

Electrics
12 V battery, 100 Ah
Alternator: 120 A
Stability control
Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual warning, attachment recognition, and overload shutdown

Tyres
400/70-20, agricultural tread

Standard equipment
Power brakes
Hydraulic oil cooler
Rear plate for mounting a trailer coupling
Radio-ready
Work lights on the cab (2 front, 2 rear)
V2001 preparation for additional function at boom head
2 hydraulic connections at the boom head
Load protection grid on the tool carrier
Lighting for road travel
Automatic battery disconnect switch
Electrical connection cable in the boom
Acoustic reverse warning
Lift cylinder support for securing
1 operator manual
1 engine manual

Special equipment
EU road approval as tractor/towing vehicle, 40 km/h incl. height-adjustable, self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting socket
Air conditioning
LED work lights on the cab (2 front, 2 rear)
Boom swing damping (B.S.S.)

Kdedpfjyv S Ufjx Ab Hji
Location: ELW Wiesbaden

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.