Prikolica z nizko platformo

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete selection of vehicles with immediately and short-term available units can be found on our website. Extract from the equipment. Complete equipment details available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * approx. 2,100 mm = raised front platform incl. gooseneck, front corners chamfered * approx. 5,350 mm = low-bed platform – flat loading area * approx. 850 mm = rear drive-on slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Load height when loaded approx. 870 mm * When operating as a combination, ensure legal overall height and length limits are observed! Frame: * Steel welded construction with front gooseneck and chamfered rear * Drive-on slope with central excavator bucket recess = indentation at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing bars (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out approx. 10 t lashing rings (4x in the low-bed, 1x at the drive-on slope, 2x on the raised platform) * Standard ball race turntable Frame attachments: * Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (track width of construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings. Distribution: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair to the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised platform before the gooseneck, inside the longitudinal beams; 1 pair at the rear of the low-bed before the drive-on slope, in the bucket recess left and right. Draw device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing mount, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-bed axles with drum brakes * Axle load capacity 11 t/axle * S-cam brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 pcs. tyres 235/75 R 17.5, 141J, brand by factory choice * 12 pcs. steel rims 6.75 x 17.5, with offset, silver Brake system/Suspension: * Dual-line air brake system according to ECE regulation R13 * Brake system by Wabco * EBS system 4S3M, sensing on 1st + 2nd axle * RSS/RSP – Stability Program Cjdpfx Ahjwx Dcyeusgn * Spring-loaded parking brake on 2nd + 3rd axles * Steel air tanks * Brake/air connecting lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Elastics as holder for EBS and electrical plugs * Air suspension with lifting and lowering facility (rear axles only), automatic ride height adjustment from 15 km/h (RTR), axle stop on front axle Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 – 10 mm above the upper frame edge * Steel checker plate covers above wheels Ramps: * 2 pcs. foldable single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with hardwood floor approx. 35 mm, impregnated * Ramps adjustable in width from intermediate gap approx. 350 mm to max. overall width approx. 3,000 mm * Ramps can be locked in driving position by chains with tensioner * Ramp lifting aid with spiral spring * Ramps can be moved manually sideways with