Prikolica z nizko platformo

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Our complete selection of vehicles with immediately and short-term available units can be found on our website.

Extract from the equipment. Complete equipment details available on request.

Weights:
* Permissible gross weight: 24 t
* Technical gross weight: 30 t

Dimensions:
* approx. 2,100 mm = raised front platform incl. gooseneck, front corners chamfered
* approx. 5,350 mm = low-bed platform – flat loading area
* approx. 850 mm = rear drive-on slope
* Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm)
* Load height when loaded approx. 870 mm
* When operating as a combination, ensure legal overall height and length limits are observed!

Frame:
* Steel welded construction with front gooseneck and chamfered rear
* Drive-on slope with central excavator bucket recess = indentation at the rear between the longitudinal beams, approx. 2,300 mm long
* Integrated in the outer frame: 5 pairs of approx. 4 t lashing bars (4x in the low-bed, 1x on the raised platform)
* 7 pairs of recessed, pull-out approx. 10 t lashing rings (4x in the low-bed, 1x at the drive-on slope, 2x on the raised platform)
* Standard ball race turntable

Frame attachments:
* Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (track width of construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm)
* 4 pairs of foldable approx. 10 t lashing rings. Distribution: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair to the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised platform before the gooseneck, inside the longitudinal beams; 1 pair at the rear of the low-bed before the drive-on slope, in the bucket recess left and right.

Draw device:
* Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing mount, drawbar retaining spring with tensioner
* Truck coupling height approx. 830 mm to approx. 1,030 mm
* Drawbar length approx. 1,800 mm

Support device:
* 2 automatic folding supports at the rear

Axles:
* 3 SAF air suspension low-bed axles with drum brakes
* Axle load capacity 11 t/axle
* S-cam brakes approx. 300/200 mm
* Automatic brake slack adjusters

Wheels:
* 12 pcs. tyres 235/75 R 17.5, 141J, brand by factory choice
* 12 pcs. steel rims 6.75 x 17.5, with offset, silver

Brake system/Suspension:
* Dual-line air brake system according to ECE regulation R13
* Brake system by Wabco
* EBS system 4S3M, sensing on 1st + 2nd axle
* RSS/RSP – Stability Program
* Spring-loaded parking brake on 2nd + 3rd axles
* Steel air tanks
* Brake/air connecting lines with 2 single coupling heads yellow/red
* EBS/ABS connection cable
* Elastics as holder for EBS and electrical plugs
* Air suspension with lifting and lowering facility (rear axles only), automatic ride height adjustment from 15 km/h (RTR), axle stop on front axle

Pgsdewx Dcyopfx Af Nsu
Floor:
* Softwood floor approx. 50 mm, impregnated, protruding approx. 5 – 10 mm above the upper frame edge
* Steel checker plate covers above wheels

Ramps:
* 2 pcs. foldable single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with hardwood floor approx. 35 mm, impregnated
* Ramps adjustable in width from intermediate gap approx. 350 mm to max. overall width approx. 3,000 mm
* Ramps can be locked in driving position by chains with tensioner
* Ramp lifting aid with spiral spring
* Ramps can be moved manually sideways with

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.