Polpriklopnik z nizko nakladalno ploščadjo

Faymonville 2-A-Tiefbett-Pendelachsen-Bolzen-Laschen

For every used semi-trailer, you will receive a current and comprehensive inspection and function report.

Gooseneck:
- Gooseneck in SNT design for optimization of loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically raise/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4

Loading Platform:
- Low-bed with external beams, designed as a telescoping vessel bridge in low-profile design with front extension
- Length 6,850 mm x width 2,540 mm
- One locking point approx. every 1,000 mm along the extension

Rear Chassis:
- Rear chassis with closed outer frame, tread plate cover, and continuous prism excavator recess approx. 1,250/700 x 505 mm, open at the rear

Axles, Suspension, and Tyres:
- "PENDULUM AXLES," all axles hydro-mechanically forcibly steered
- Hose rupture valve on axle balancing cylinders with automatic RESET function
- Hydraulic cylinders with shut-off valves and pin lock for securing in raised position
- Final axle coating with 2 layers of 2-component paint (acrylic), single-colored in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyre size 245/70 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 14
- TPMS tyre pressure monitoring sensors installed in all wheels including spare wheels

Accessories included:
- Steel front wall, plug-in, approx. 400 mm high
- 3 kW electro-hydraulic power unit for controlling hydraulic functions, except hydraulic winches
- One spare wheel
- External beams on gooseneck with mounting holes for boltable lashing rings
Bsdpfx Ajyg Etbebrelc
- First hole approx. 200 mm from the front, then approx. every 400 mm
- One lashing ring each left and right on the rear slope of the gooseneck
- Plug-in aluminium side boards on gooseneck, approx. 400 mm high, anodized
- Plug-in aluminium tailboard on gooseneck, approx. 400 mm high, anodized
- Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide
- Hydraulic traverse for supporting the gooseneck on the tractor unit or a dolly
- 2" kingpin
- Round NATO socket on the front connection bar
- Gooseneck closed at the rear upper section with a removable cover
- 4 wheel chocks with holders
- Hydraulic couplings from gooseneck to low-bed with multi-coupling instead of screw couplings
- One pair of steel ramps with climbing strips and locking bolts for bridging the low-bed's mounting hooks
- Ramps can be placed over or between the hooks
- Mounting option for steel access ramps at the rear between the gooseneck’s external beams
- One pair of threaded blocks at the front and rear on the loading platform’s external beams for mounting boltable M24 rings
- Prepared for mounting bolt-on container locks for 1x20ft on the outer beams
- Mechanical pin-strap coupling from the low-bed to the chassis, for replacing the loading platform or installing extension beams
- With electro-pneumatic-hydraulic couplings
- External beams of the low-bed equipped with a painted sand layer for slip resistance
- Removable (galvanized) loading floor, can be inserted in 3 elements between the external beams with hardwood covering
- Foldable widenings, approx. 230 mm per side
- Hanging bar at the front of the rear chassis to the low-bed for loose approach ramps
- 2 pairs of stake pockets integrated in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.