Nizki nakladalnik

Vertra 4-Achser 81 cm verlängerbar verbreiterbar Lenk+...

Stanje: rabljeno, največja dovoljena obremenitev: 42.500 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2022, with 12 axles, divided, hydraulically suspended, with hydromechanical forced steering, with rear taper and drive-on ramps STZ-L Gooseneck - robust welded steel construction - formed loading area 3,950 x 2,480 mm incl. tapered rear section - hydromechanical forced steering (dual-circuit steering) - turntable-mounted king pin plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load 24 t - rear turning radius: 2,600 mm Loading Deck - stepped outer beams 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decking installed - extendable by 2,053 mm - includes aluminium bridging rails for creating a flat surface - excavator arm recess at rear of chassis: 4,900 mm long, 880 mm wide, 480 mm deep - chassis length at rear: 4,900 mm including 500 mm rear taper, loading height 890 mm - pair of wheel recesses in lower loading area - hydraulically suspended 3-axle chassis - divided Gigant axles with 600 mm stroke Rear of Vehicle - design: 500 mm rear taper - hydraulic rear support Drive-on Ramps - 2-piece ramps, length: 2,850 + 1,850 mm, width: 800 mm - rubber-coated surface with climbing strip Brake System - dual-line full air brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic rod plates (AGS) - parking brake operated via spring-loaded cylinders - ABV brake system Special Equipment - radio remote control for steering and ramp operation - central lubrication system Technical Data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Loaded saddle height: 1,300 mm Loading Deck Loading area (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Stepped outer beams: 4,630 mm long plus 2,053 mm extension Centre beam: 980 mm Excavator arm recess: 4,900 mm long, 880 mm wide, 480 mm deep Steering Fpjdpfew Etd Tex Af Ujb 1st to 3rd axle with hydromechanical forced steering (dual-circuit steering)

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lift and lower function as well as RtR valve * Start-up aid for shunting purposes activated on first axle via EBS (no installation required on the truck) * Smart-Board infotool mounted on trailer with pressure sensors for displaying total axle load * Last axle as self-steering axle with electro-pneumatic steering lock * Steering lock for self-steering axle can be activated from driver’s cab for maneuvering via EBS (no installation required on the truck) * 2nd king pin position * Side underrun protection, support winches at the front, swing-down supports at the rear of the frame * 15-pin electrical connector * 12/24 V LED lighting * Removable LED beacon at rear * 2 additional LED reverse lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck) * Mechanically adjustable warning signs front and rear * Straight steel mudguards * Spare wheel holder in front of the bulkhead traverse (without spare wheel) * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (in RAL color of choice), foldable and removable, mounted laterally on the gooseneck platform * Rear wall insert – 150 mm high * Rear slope on the gooseneck platform about 700 mm long with checker plate surface and perforated strip at the end for attaching aluminum loading ramps * Gooseneck platform fitted with 50 mm clamped wooden floorboards and low-loader deck with 60 mm clamped wooden floorboards * Tread plate over the axles * 9 mechanical fold-out widenings to reach total width of 3 meters, not on the rear slope (widening planks included with closed storage compartment transverse under the loading area) * 3 storage shafts under the gooseneck platform for stowing optional aluminum ramps or wooden planks for wheel recess covers * Pivoting arm as carrier for connection lines from the truck to the trailer * Load securing package consisting of: perforated outer frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing force per point at min. 480 mm spacing) * On each side: 3 x 13.4 t recessed lashing rings in the floor (1 x on gooseneck platform, 1 x on main beams after neck, 1 x above middle axle next to main beam) * On each side: 3 x 13.4 t lashing rings on the outer frame (1 x start of gooseneck slope, 1 x start of ramp slope, 1 x end of ramp slope) * On each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * On each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 on front, 1 on rear wheel recess) * Extended excavator arm rest from end of last rigid axle over steering axle up to rear cross member, continuous with internal reinforcement, ca. W = 770 mm x rear D = 270 / front depth 170 mm, on each side 2 x 6.4 t lashing rings in excavator arm rest Fpodpfotpta Dsx Af Uob * On each side: 2 wheel recesses, 390 mm deep and 640 mm wide, for transporting wheel loaders with wheelbase from 3,000 – 3,590 mm and tire diameter of 1,760 mm, with sliding covers,