Tovorno vozilo za težke obremenitve

VOLVO FH 540 10x4 mit Fassi F1150 Kran

Volvo FH540 chassis with Wiese body and Fassi loading crane
Volvo FH540 10x4 removable flatbed with F1150RA.2.28 & Fly Jib including winch and work basket

---- Operation
· For good roads, normal operating conditions
· Long-distance transport · Predominantly flat topography
· Ambient temperature up to +40°C; if more than +40°C, max. 25 h/year
· Ambient temperature down to -25°C; if below -25°C, max. 25 h/year
· Center of gravity height (body and load) approx. 0.5 - 1 m above frame upper edge
· Clean roads, max. 10% dirty
· Platform chassis without preparations
· Gross combination weight, technically: 80 t (observe trailer coupling drawbar pull!)
· Special vehicles
· Vehicle for crane behind the driver’s cab
· Rear-view mirrors for superstructure width 2600 mm

· New model
· Chassis height: MED (medium), for precise height measurements please refer to VBI/WIS
· Electro-hydraulically steered trailing axle, single tires
· Rear air suspension, tridem, 2 driven axles
· Globetrotter safety cab FH
Ledpsxl Ip Ijfx Agzsai
· Wheelbase 4,300 mm
· Emissions according to Euro 6 Stage E, with SCR, particulate filter and exhaust gas recirculation
· Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm
· Volvo Engine Brake+ (VEB+). Braking performance: 340 kW/462 HP (D13S)
· Meets ADR braking regulations.
· I-Shift AT2612, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm
· Liftable axle
· Driven axle RTH2610B. Dual-axle hub reduction. 4 planetary gears
· Longitudinal and transverse differential locks
· AA tires 315/80R22.5
· Final drive ratio 3.33:1
· Fuel type: Diesel
----
Included in delivery:

Base unit: F1150RA.2 xhe-dynamic

Wiese platform body with drop sides

* Execution of all necessary chassis work for crane installation, disassembly and assembly of add-on parts, exhaust system, tanks, etc. Adaptation of vehicle frame. All chassis and superstructure works are carried out strictly in accordance with the relevant manufacturer’s superstructure guidelines and executed to the highest quality standards. * Complete assembly of the in-house designed and manufactured special subframe made of fine-grain steel for crane and body. The subframe is fully welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability for crane operation. A unique feature is the subframe’s construction. Execution is top quality and painted in the RAL chassis color. * Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Installation position: front
* Flatbed executed as a steel/welded structure, REMOVABLE PLATFORM, approx. 4,800 mm length x 2,480 mm width with hydraulically extendable section (1,400 mm), remotely controlled. Flatbed body steel / sandblasted / painted in RAL chassis color. Removable aluminium drop sides by Suer brand, 600 mm high, anodised finish. Standard flatbed floor with welded, painted 4 mm steel chequer plate. * 2 rows of MultiSave lashing systems embedded and welded into the floor. 6 x Thiele lashing eyes 5,000 daN embedded into the floor frame profile. 8 x retractable lashing eyes per side 2,000 daN, flexible profile/arrangement. * Robust front wall comprising a welded frame with welded-on 4 mm steel plate and 5 accessory hooks, front wall height 1,300 mm, made from painted steel in RAL chassis color. Cladding, mudguards, stainless steel (WIESE design). 4 x 20’ container locks at the front wall (2x) in the exten...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.