Polpriklopnik s premičnim dnom

STAS bioSTAR 91,3 cbm

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, prostornina tovornega prostora: 91 m³, Leto izdelave: 2024, Oprema: ABS, Last king pin load (t) 12 Axle load (t) 8 Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Wheelbase (mm) 7850 Internal height front (mm) 2641 Internal height rear (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Chassis steel Tyres 385/65R22.5 Chassis neck height (mm) 217 Axle version Intra Brake type SAF - SBS 2220 Option 1st axle with traction aid Optimised traction aid Tyre pressure monitoring system Air suspension with lift and lower valve Lowering of air suspension via Smartboard and lift/lower valve Pneumatic coupling head European palm coupling Rims steel Landing legs Steel gearbox landing legs at front, type JOST MODUL, with single-sided operation and 2-speed gearbox Operation underrun protection fixed Spray flaps underrun protection black with STAS logo over full width of underrun protection Control console EBS control on left in direction of travel, behind axle assembly Sliding floor control console positioned on left in direction of travel, behind axles Tool box plastic Lighting type ECOLED II Reversing lights 2 LED reversing lights, rear left and right Lhedpeqaaf Rjfx Ab Hsd Work lights 2 LED work lights front left and right, in area of landing legs Hydraulic coupling rotary coupling, female, 3000 mm hose Hydraulic coupling connection option located at front wall Smartboard Aluminium access ladder 3.80 m Broom and shovel holder positioned on left side protection in direction of travel Load pressure gauge Ø 100 mm - front of chassis With two plastic wheel chocks including brackets Moving floor system manufacturer Cargo Floor Air and electric supply console centrally positioned with gantry Lighting unit protection: single-piece protective cover Superstructure Front wall angle (°) 90 Rear wall angle (°) 90 Rear wall type swing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Standard fifth wheel plate Front wall profile 3 mm - 2 mm Side wall profile 3 mm - 2 mm, smooth inside and out, double-wall profiles 600 mm wide - 30 mm thick Distance lower corner profile to upper side wall at rear 2649 Floor system operation: radio remote control Cargofloor control type CF 500 SL-C - E-CONTROL Number of floor profiles 21 Type of floor profile 10 mm ribbed End plate moving floor aluminium With additional plastic guides beneath floor profiles Emptying wall aluminium Emptying wall with brushes Emptying wall hand grip: stainless steel handles for easy movement Mounting of emptying wall: 6 wheels with bidirectional cleaning (cargo floor) Rear wall aluminium Swing door version divided 1/2 to 1/2, with upper crossmember Opening of door wings: right-hand door wing opens first Crossmember on door: swivelling version Rear door lock 1 x rotary bar per door half Rear wall sealing with standard rubber seal Rear wall additional lock pneumatic single-acting Operation of additional lock manually at side-mounted controls on the console Rear door impact protection aluminium buffers Tensioning gear for tarpaulin tensioning, tensioning gear with handle, mounted below/on the side wall of the body Type of roof rib steel straight design, foldable Number and position of roof ribs: 2 centre ribs (centrally, equally spaced) and 1 rear rib (rear) Straight tarpaulin holders

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Lhsdpfx Abegcw Rms Hsd Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Lhedpfx Asfi Nmweb Hjd Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Lhjdpfx Ajfi Nmpeb Hsd Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, lastna masa: 8.200 kg, največja dovoljena obremenitev: 26.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2023, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 82 m³, skupna dolžina: 13.460 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 60 odstotek, barva: siv, Leto izdelave: 2023, obratovalne ure: 87.097 h, prevoženi kilometri: 87.097 km, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40978 Reisch, Moving Floor Trailer * Year of manufacture: 2023 * ABS (Anti-lock Braking System) * Alloy wheels * Air suspension * Lift axle * Neutral tarpaulin * Used tarpaulin * Portal doors * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Connection plug 15-pin * Lifting and lowering device * Storage box/toolbox * Platform * Sliding tarpaulin * Suspension: Air * Gross vehicle weight: 35,000 kg * Curb weight: 8,200 kg * Payload: 26,800 kg * Permissible total weight: 35,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 60% -- 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,460 mm, W=2,450 mm, H=2,500 mm * Internal volume*: 82 m² * Pallet spaces: 33 Lsdpfsyv Upxjx Ab Hehd * Wabco SmartBoard * Mileage (read): 87,097 km * Radio remote control * Tire pressure monitoring system * Cargo Floor CF 500 mm * 7 mm thick XD Extreme Duty * Saddle height: 1,150 mm * Capacity: 91.6 m³ * Full LED lighting * Colour: 7012 Basalt Grey * Upon request, we can send you a video * Construction description and more imagesHighlight: Folding wall doors / Radio remote control / 87tkm// Disclaimer: Subject to prior sale and errors. More photos and videos available on our website. Our range of services includes for example: * Purchase / Sale / Rental of commercial vehicles * Fast and easy financing * Handling of all (export) documentation * Order of export / customs license plates * Vehicle refurbishment: new tarpaulins, signwriting, painting, etc. * Professional loading / load securing * TüV inspections, registration service * Transfer of commercial vehicles Contact our trained specialist staff. We are happy to advise you.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2024, dolžina tovornega prostora: 13.410 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.720 mm, skupna dolžina: 14.010 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: črn, Leto izdelave: 2024, = Further options and equipment = - Rear door type: double doors - Body capacity: 91 m³ (The total volume of the body.) - Material: aluminium - Floor material - Tarpaulin - Sliding wall - Door opening width: 248 cm - Door opening height: 269 cm = Further information = General information Cab: 9999 Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF 9 ton Intradisc Brakes: disc brakes Suspension: air suspension Axle 1: lift axle; left-hand tyre tread: 70%; right-hand tyre tread: 70% Axle 2: left-hand tyre tread: 80%; right-hand tyre tread: 80% Axle 3: left-hand tyre tread: 40%; right-hand tyre tread: 40% Weights Gross vehicle weight (GVW): 42,000 kg Maintenance APK (roadworthiness inspection): Certified until 03/2027 = Company information = Would you like more information about this vehicle? We recommend you visit BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Do you want to know more? Visit BAS World online! Lhedpfjyu Uklox Ab Hjd España (ES) We speak 17 languages, so we can always help you in your own language. Feel free to contact us directly. Our Spanish-speaking staff will be happy to assist you! Deutschland (DE) We speak 17 languages, so we can always help you in your own language. Feel free to contact us directly. Our German staff will be happy to assist you! France (FR) We speak 17 languages, so we can always help you in your own language. Do not hesitate to contact us directly. Our French colleague will be happy to assist you! Portugal (PT) We speak 17 languages, so we can always support you in your own language. Do not hesitate to contact us directly. Our Portuguese-speaking colleague will be happy to assist you! Italia (IT) We speak 17 languages, so we can always help you in your own language. Do not hesitate to contact us directly. Our Italian colleague will be happy to assist you!

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 09/2022, prostornina tovornega prostora: 92 m³, skupna dolžina: 14.010 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 9.110 mm, barva: siv, Leto izdelave: 2022, Oprema: ABS, = Additional Options and Accessories = - Aluminium floor - BPW axles - CARGO FLOOR 10MM - EBS - Remote control for Cargo Floor - Remote control for moving floor - Rear doors - Lifting axle - Fifth wheel coupling - LED lights - LED work lights - Air suspension - Sliding tarp/cover - Disc brakes - Toolbox = Notes = New technical inspection (APK/TÜV) Kraker K-Force 92m³ Year: 09-2022 160,470 km 10mm Cargo Floor AS-1 lift axle Axle load weighing Door in front bulkhead 4 work lights all around Trailer is in perfect condition = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Lhsdoxr T Nmepfx Ab Hod Suspension: Air suspension Rear axle 1: Lift axle; max. axle load: 9,000 kg; tyre tread left: 90%; tyre tread right: 70% Rear axle 2: max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 90% Rear axle 3: max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 70% Weights Kerb weight: 7,810 kg Payload: 34,190 kg Gross vehicle weight: 42,000 kg Maintenance, History and Condition APK (General Inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OT-36-LV Further Information Please contact John Hesselink or Christel Hesselink for more information. = Company Information = Want to finance this vehicle? No problem. We can quickly arrange a favourable lease contract for you with terms of 12, 24, 36, 48 or 60 months. All photos and further information can be found on our website or contact us directly.

Stanje: rabljeno, največja dovoljena obremenitev: 29.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2004, naslednji pregled (TÜV): 03/2028, Internal vehicle no.: G200182 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO from: Luis Lucena (German, English, Spanish, French) Viktoria Sologubova (Polish, Russian, Ukrainian, English) Long material transporter SCHWARZMÜLLER 3-axle, gross vehicle weight: 35,000 kg, unladen weight: 5,340 kg, First registration: 2006 Ledpfx Abouz Nl De Hshd Errors excepted We are happy to accept your used vehicle as a trade-in. Financing possible directly through our company. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Stanje: rabljeno, največja dovoljena obremenitev: 28.256 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.540 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.715 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Kraker K-Force premična tlačna tlačna podlaga 92m³ v vrhunskem stanju ? SAF osi z disk zavorami 430mm ET 120 ? 1 os kot dvižna os ? 385/65 R22,5 ? Alcoa aluminijasta platišča ? Orodje (plastično) škatla ? Stranska zaščita z umetno maso ploščo ? Lestev desno in levo na čelni steni ? 2x plastična čistilca tirnic ? 92m³ ? Priključek za zrak ? Gladke aluminijaste talne deske, 10mm, 21 desk ? Daljinsko upravljanje ? Ponjava 650 gr/m² ? Preklopne opore za ponjavo Lsdpfxex Hb Nys Ab Hehd ? Utripajoče stranske označevalne luči ? Večkomorni zadnji žarometi ? 4x delovne luči Za dodatne informacije smo vam z veseljem na voljo.

Stanje: rabljeno, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, Leto izdelave: 2020, Oprema: ABS, 12172 FLATBED SEMI-TRAILER WOOD SCHWARZMÜLLER 3-axle Y series / STAKE SEMI-TRAILER LONG / SHORT Manufacturer: SCHWARZMÜLLER First registration: 04.2020 Dimensions: 13150 x 2550 x 2800 mm Gross vehicle weight: 44,000 kg Unladen weight: 5,820 kg Payload: 32,480 kg Fifth wheel load: 12,000 kg Air suspension Air suspension lift/lower function Disc brakes Spare wheel holder Axle make: SAF HD 430 mm Lifting axle Chassis paint: 7021 black grey Tyres: 6 units Tyre condition: 15/15/16/16/12/12 mm Rear axle tyres: 385 / 65 R 22.5 Ideal for transporting long timber, short logs, or sawn timber Lightweight frame made of high-strength NAXTRA special steels Steel checker plate cover between the longitudinal frame beams above the running gear and at the front Grapple guard plates on the frame longitudinals Extra strong steel profile front wall, approx. 2,500 mm high with central supports 2 x steel profile cross rests, chamfered on both outer sides 8 ECCO STEEL 9-ton stanchions (suitable for transporting sawn timber) Stanchion sockets welded with clamp fixtures, therefore repositionable Each stanchion socket left and right with 1 lashing ring for strap hooks Aluminium air reservoir / standard 40,000 kg gross weight With approval up to 44,000 kg gross weight possible Ledpfx Aow Higmsb Hjhd All information subject to change and prior sale reserved. If you have any questions regarding this or other vehicles, please call us.