Polpriklopnik s premičnim dnom

REISCH Faltwand Türen,82m³, Side Doors, 87tkm !

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, obratovalna teža: 39.000 kg, Oprema: ABS, Novo polpriklopnik s premičnim podom Legras FMA 92 m3 Podvozje s samonosno nadgradnjo ali celoten okvir od čela do vrat Preme SAF Intradisc+ CD, aluminijasta platišča, premijske pnevmatike 1. os dvignjena, 3. samousmerjevalna Pod Legras FMA Tip 10QUALIMAT, hidravlična enota Cargo Floor, radijsko upravljanje Stene 3/2 mm, zadnja vrata s 4 zapirali Pokritje z ročno ponjavo, hodnik z dvojnimi stopnicami Popolna LED Shapeline razsvetljava, 4x delovne luči Omarica, rezervoar za vodo, EBS računalnik in standardna oprema Hedpeuc Sw Nofx Ab Deu Na voljo več modelov

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Hjdpfx Absfi Nmwj Dju Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Hsdpfx Abofi Nmps Dsu Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, lastna masa: 7.620 kg, največja dovoljena obremenitev: 31.380 kg, skupna masa: 39.000 kg, konfiguracija osi: > 3 osi, prva registracija: 10/2016, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.360 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.640 mm, prostornina tovornega prostora: 87 m³, skupna dolžina: 13.360 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 40 odstotek, barva: rjava, Leto izdelave: 2016, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 69816 Schwarzmueller, moving floor semi-trailer * Year of manufacture: 2016 * ABS, anti-lock braking system * Air suspension * Lift axle * Load securing certificate in accordance with DIN EN 12642 Code XL * Portal rear doors * Air connection coupling head (red + yellow) * Connector plug 2x 7-pin * Connector plug 15-pin * Lift and lowering device * Storage box / toolbox * Platform * Sliding tarpaulin (rolling tarp) * Type approval / inspection (HU / AU) valid until 01.2027 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,620 kg * Payload: 31,380 kg * Permissible total weight: 39,000 kg Hedpfx Ajyicipjb Dju * Axle manufacturer: SAF * Tyre condition 1st axle: 40% -- 40% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 60% -- 50% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 40% -- 30% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Internal dimensions: length = 13,360 mm, width = 2,470 mm, height = 2,640 mm * Internal volume*: 87 m³ * Pallet spaces: 33 * Cargo Floor 8 mm * Used exclusively for transport of wood and wood chips * Fifth wheel height: 1,160 mm * LED lighting * Aluminium air reservoir * Stainless steel underride guard * Upon request, we will send you a construction description and further photos Disclaimer: Subject to alterations, prior sale, and errors More pictures and videos available on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing solutions * Handling of all (export) documents * Ordering export plates / customs registration * Vehicle preparation: new tarpaulin, labelling, paintwork etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained staff – we are happy to advise you.

Stanje: rabljeno, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, Leto izdelave: 2020, Oprema: ABS, 12172 FLATBED SEMI-TRAILER WOOD SCHWARZMÜLLER 3-axle Y series / STAKE SEMI-TRAILER LONG / SHORT Manufacturer: SCHWARZMÜLLER First registration: 04.2020 Dimensions: 13150 x 2550 x 2800 mm Gross vehicle weight: 44,000 kg Unladen weight: 5,820 kg Payload: 32,480 kg Fifth wheel load: 12,000 kg Air suspension Air suspension lift/lower function Disc brakes Spare wheel holder Axle make: SAF HD 430 mm Lifting axle Chassis paint: 7021 black grey Tyres: 6 units Tyre condition: 15/15/16/16/12/12 mm Rear axle tyres: 385 / 65 R 22.5 Ideal for transporting long timber, short logs, or sawn timber Lightweight frame made of high-strength NAXTRA special steels Steel checker plate cover between the longitudinal frame beams above the running gear and at the front Grapple guard plates on the frame longitudinals Extra strong steel profile front wall, approx. 2,500 mm high with central supports 2 x steel profile cross rests, chamfered on both outer sides 8 ECCO STEEL 9-ton stanchions (suitable for transporting sawn timber) Stanchion sockets welded with clamp fixtures, therefore repositionable Hodpow Higmsfx Ab Dou Each stanchion socket left and right with 1 lashing ring for strap hooks Aluminium air reservoir / standard 40,000 kg gross weight With approval up to 44,000 kg gross weight possible All information subject to change and prior sale reserved. If you have any questions regarding this or other vehicles, please call us.