Priklopnik za platformo

Renders **CRANE PALFINGER PK4500A-STEERING AXXLE**

Stanje: rabljeno, Leto izdelave: 1999, Payload: 19,990 kg Gross vehicle weight (GVW): 8,010 kg Front tire condition: 70% Rear tire condition: 70% Iodpfxeutw I Nj Ab Ujtr Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 For further information, please contact PFEIFER GROUP.

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve Itodpfx Aeiuy Nlsb Ujr - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: rabljeno, največja dovoljena obremenitev: 25.860 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, Oprema: ABS, Krone SZP Mega Trailer Itodpfx Aotxffbeb Uor Flatbed with sliding curtain, Edscha sliding roof, and portal doors; lifting roof; 2 axles; BPW axles; disc brakes; air suspension; ABS.

Stanje: rabljeno, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 08/2024, dolžina tovornega prostora: 13.590 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 1.010 mm, Oprema: ABS, VIN: W09SPLB2ZPEN10219 2-Axle Semi-Trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth wheel load: 12,000 kg Aggregate load: 20,000 kg Warning boards for oversize, extendable Steering: Itjdpfxjv T Hyfs Ab Uor Design: VSE ETS II, on both axles Axles / Suspension: Number/Capacity/Manufacturer: 2 x 10,000 kg, SAF Brakes: Drum brakes 17.5" Suspension: Air suspension with lift and lower function Axle lift: not included Axle spacing: 2,100 mm Wheel size: 235/75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel toolboxes Locking positions: 6 pairs, suitable for the following positions: *11,000 mm deck flush rear *11,000 mm deck flush front 2,400 mm deck flush rear 2,400 mm deck flush front Load securing Lashing rings type: 50kN Vario (see appendix) Quantity & Position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c/c approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake pocket rows, crosswise: 4 rows (positions to follow) Customs plates and insurance available on request, at an extra charge! For export business, we can take care of the export declaration and registration for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information please contact Mr. Lübberding by mobile/WhatsApp. Always make an appointment for inspection/test drive! Just pay us a visit. We are looking forward to seeing you. ---- All details provided online are non-binding descriptions and do not represent guaranteed properties. The seller does not accept liability for typographical errors, data transmission errors, changes, input errors, or mistakes. Subject to prior sale.

Stanje: rabljeno, lastna masa: 9.420 kg, največja dovoljena obremenitev: 21.580 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2014, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.150 mm, skupna dolžina: 14.300 mm, vzmetenje: zrak, barva: srebrn, vrsta prenosa: mehanski, Oprema: ABS, Krmilna os Notranje mere: 13,40x2,46x2,15 m nakladalna ploščad 2.000 kg, krmilna os, nakladalna ploščad Iodpfx Abexqgnys Ustr

Stanje: rabljeno, lastna masa: 5.900 kg, največja dovoljena obremenitev: 24.100 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 315/70R22.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), air suspension, last axle forced steering, ABS (anti-lock braking system), underrun protection, side aluminium protection rails, landing legs, twin tyres, stanchions Body: 2-axle timber trailer with 6x Ecco aluminium bolsters, 2x Mercedes-Benz axle, disc brakes, hot-dip galvanized frame. Loading height approx. 1,540 mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Itsdpfx Abjp Nkwvo Usr

Stanje: rabljeno, največja dovoljena obremenitev: 15.100 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2018, dolžina tovornega prostora: 13.630 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.140 mm, Oprema: ABS, * Edscha streha * Zračno vzmetenje * 2-osno * Dvojna montaža * 15.000 kg nosilnosti Isdsxvkvrspfx Ab Ustr Interna številka vozila: 9328----Pridržujemo si pravico do napak in vmesne prodaje.