Priklopnik sedeža z delovno ploščadjo

ES-GE 3-Achs Sattelanhänger - Rungen + CV

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control Kjdpfx Abjugqvfj Hjdi * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2007, skupna širina: 2.740 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17.5, medosna razdalja: 14.380 mm, barva: modra, Leto izdelave: 2007, Nooteboom EURO-54-03 Operates on 24V supplied by the tractor unit. Remote steering via cable control. SAF axles. Extends by 550 cm. Wheelbase: 1438 – 1988 cm. Total length: 1633 – 2138 cm. Distance from kingpin to rear of trailer: 1528 – 2078 cm. Kjdpeuydmmsfx Ab Hsdi Loading platform dimensions: Length: 750 cm + 550 cm (extendable) Width: 274 cm + extensions Loading height: approx. 48 cm = Further Information = Axle configuration Tyre size: 245/70 R17.5 Brakes: Drum brakes Suspension: Hydraulic suspension Front axle: Twin tyres; Steered; Tyre tread depth left inside: 40%; left outside: 40%; right inside: 40%; right outside: 40% Centre axle: Twin tyres; Steered; Tyre tread depth left inside: 40%; left outside: 40%; right inside: 40%; right outside: 40% Rear axle: Twin tyres; Steered; Tyre tread depth left inside: 40%; left outside: 40%; right inside: 40%; right outside: 40% Weights Unladen weight: 16,720 kg Payload capacity: 34,280 kg Gross vehicle weight (GVW): 51,000 kg Identification Model number: EURO-54-03 / 5.5MTR EXTENDABLE / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the information provided in the text.

Stanje: novo, največja dovoljena obremenitev: 34.660 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including those available immediately and at short notice, on our website. Excerpt from equipment features. Complete equipment list available on request. Loading platform: * Loading platform with double extension, equipped with pneumatically operated locking * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion Axles: * BPW hydro-mechanically forced steering axles * Air suspension with lifting and lowering valve * Axle tool kit Brake system: * Brake system compliant with EU regulations, EBS-E (2S2M), without connection lines to the tractor unit Steel structure: Kdsdpfx Abek Ugaco Hei * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat in solid RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver * Metallic paint not available Electrical system: * Electrical system compliant with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at front connector rail with 24N, 24S & 15-pin sockets in accordance with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including accessories: * Remote steering at front and rear, operated via cable remote control with push buttons, with axle track control (no installation in the tractor unit) * Electro-hydraulic system * Four wheel chocks with holders at front bulkhead * 2-inch king pin * Yellow-red air couplings at the galvanized connector rail at the front * Yellow reflective tape in accordance with EU regulations, on the sides, extension and rear of trailer * European reflective boards (red-yellow) on the rear of the trailer * One mudflap ( ) at the rear of the trailer * Manual and documentation supplied on USB stick * Loading platform with heavy-duty hardwood floor * Ten pairs of stake pockets for insertable stanchions 100 x 50 mm in the outer frame of the loading platform * Mounting bracket for beacon at rear of trailer * Galvanized supports under the loading platform chamfer * Mounting bracket for beacon at rear of trailer * Attachment rail for ALU loading ramps at rear of vehicle * 80 km/h speed stickers on rear and both sides * Axle load gauge including load chart * Galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump guard * Spiral cable (approx. 35 mm², approx. 3.5 m long, max. 250A) to supply electro-hydraulic system and/or electric winch (between trailer and tractor), with NATO-NATO connector * Anti-slip sand coating applied to the centre beam * 6 pairs of WADER container locks in the loading platform for 1 x 20' container, 2 x 20' containers, or 1 x 40' container (if extended, one additional set provided) [Text cut off]

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform Kdjdpfx Ajv Etx Eob Hoi * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)