Prikolica z nizko platformo

HUMBAUR HBTZ 217224 BS SCHRäG TANDEM-TIEFLADER VERZINKT, SAF-ACHSEN,

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° Bdsdpfoup U Hzsx Agteh - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, lastna masa: 793 kg, največja dovoljena obremenitev: 2.707 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.840 mm, vzmetenje: parabolično listje (vzmet), Ifor Williams prikolica za gradbene stroje - Tandem / dvoosna - Znižan zadnji del za izjemno plitvi nakladalni kot - Polna rampa, dolžina 120 cm - Notranje mere pribl.: D x Š 360 x 184 cm - Dovoljena skupna masa: 3500 kg - Lastna teža pribl.: 800 kg - 24 mm vodoodporna talna plošča za visoke točkovne obremenitve - 10 pritrdilnih obročkov (800 kg) - Nosilec za žlico spredaj - Pohodne jeklene blatnike - Pnevmatske gume: 185/70R13C Bdodpfjxcah Djx Agtjh Na slikah je prikazan model s standardnimi lučmi; trenutno ponujeni model ima že LED osvetlitev 12/24V Dodatno, vključeno v ceno: - Škatla za orodje, zadaj levo - 4 dodatni pritrdilni obročki na tleh - Rezervno kolo z nosilcem

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2026, Oprema: ABS, Three-axle trailer BPW low-loader axles Bdedpoh I H Ddsfx Agtoh Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Laterally adjustable Direct-acting vertical spring supports

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 5.500 kg, največja dovoljena obremenitev: 24.500 kg, skupna masa: 31.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235×75 R17,5, medosna razdalja: 1.310 mm, Leto izdelave: 2026, Oprema: ABS, spojka prikolice, CETRATEK L75-3 – tridem prikolica z nizko nosilnostjo – robustna, prilagodljiva in zasnovana za težka opravila CETRATEK L75-3 je vsestranska tridem prikolica z nizko nosilnostjo, namenjena profesionalnemu transportu gradbenih strojev, kmetijske mehanizacije in težkih delovnih naprav. Robustna konstrukcija, prostorna nosilna površina in številne možnosti za prilagoditev jo naredijo zanesljivo transportno vozilo za gradbeništvo, kmetijstvo in obrt. Tehnični podatki: * Največja dovoljena skupna masa: 36.000 kg * Največja dovoljena skupna masa z izjemo v skladu s členom 70 StVZO: 31.000 kg (30.000 kg + 1.000 kg oporna obremenitev) * Standardna dovoljena skupna masa: 24.000 kg * Nosilnost: približno 25.500 kg * Lastna teža: približno 7.800 kg, odvisno od opreme * Oporna obremenitev: 1.000 kg * Skupna dolžina: 9.720 mm * Nosilna plošča: 6.600 mm + 900 mm poševna površina * Višina nosilne plošče: 900 mm * Širina: 2.550 mm + 250 mm + 250 mm, ročno nastavljiva * Skupna višina: 3.710 mm s standardno rambo * Razdalja med priklopom in 1. osjo: 5.130 mm * Medosna razdalja: 1.360 mm * Širina sledi: 1.900 mm * Višina priklopa: 800 mm, nastavljiva od 750 do 1.100 mm * Vlečna kljuka: Ø 40 mm, po želji Ø 50 mm * Zadnje rampe: 3.000 × 750 mm, stransko ročno pomične, nosilnost 20 t na par ramp * Nosilna plošča: jeklo + 60 mm trdega lesa DABEMA * Ročna oporna nogica, izvedba 12 t * Ročni zadnji dvižni mehanizem, opcijsko hidravlični Električna in hidravlična oprema: Bsdpfx Aot Sui Ijgtjdh * Napetost: 12 V / 24 V * LED osvetlitev in stranski reflektorji * 7-polni vtič EBS po standardu ISO 7638 * 7-polne električne priključke po standardih ISO 1185 in ISO 3731 * 15-polni električni priključek po standardu ISO 12098 * Vtičnica NATO * Vodoodporni priključki * Lastna krovna hidravlika * Hidravlični motor 2,2 kW * Napajanje preko električnega sistema vlečnega vozila Pripomočki za pritrditev tovora in oprema: * Zaklepne orodne škatle na obeh straneh * Zaščitene kontrolne enote za hidravliko in zrak pred brizganjem vode * 7 pritrdilnih zank na vsaki strani, nosilnost 10 t na vsako * 6 pritrdilnih zank na nosilni plošči, nosilnost 10 t na vsako * 2 kovinski klini * Ščitniki proti umazaniji za prednjo in zadnjo osjo Odvisno od namena uporabe lahko L75-3 vključuje, med drugim, osi TRAX ali SAF, dvižno in sledilno osjo, avtomatski sistem mazanja, hidravlično nastavljive rampe, hidravlično zadnjo oporo, hidravlično sprednjo oporo, aluminijaste rampe ter izvedbo z vročim pocinkanjem. Zaščita površine in garancija: Peškanje jekla, dvoslojni temeljni premaz in dvoslojni akrilni lak v barvi RAL po želji stranke. Za podvozje in vzmetenje je zagotovljena 24-mesečna garancija, za električne in hidravlične komponente 12-mesečna garancija. Poleg tega je na barvno obdelavo zagotovljena 5-letna garancija v skladu z garancijskimi pogoji. Osnovna cena od 35.750,00 € neto. Možne so individualne dodatne opreme in konfiguracije po želji stranke. CETRATEK L75-3 združuje visoko nosilnost, praktične dimenzije in obsežno serijsko opremo s številnimi možnostmi individualne konfiguracije – zmogljiva prikolica z nizko nosilnostjo za zahtevne transportne naloge. Pridržujemo si pravico do sprememb cen, tehničnih specifikacij in napak. Slike so simbolične in lahko prikazujejo dodatno opremo oziroma možnosti.

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve Bdedeykpbkjpfx Agtjh - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram