Standardni vlačilec

MAN 28.500 TGS mit Lift+Lenkachse Allrad

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 06/2015, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/17.5, barva: rdeča, Leto izdelave: 2015, Oprema: ABS, = Weitere Optionen und Zubehör = - Luftfederung = Weitere Informationen = Achskonfiguration Reifenmaß: 235/75/17.5 Marke Achsen: SAF Bremsen: Trommelbremsen Federung: Luftfederung Hinterachse 1: Doppelbereift; Max. Achslast: 10.000 kg; Gelenkt Hinterachse 2: Doppelbereift; Max. Achslast: 10.000 kg; Gelenkt Gewichte Leergewicht: 9.900 kg Zuladung: 35.100 kg zGG: 45.000 kg Funktionell Höhe der Ladefläche: 55 cm Ausziehbarer Aufbau: Ja Zustand Technischer Zustand: sehr gut Optischer Zustand: sehr gut FAYMONVILLE MEGAMAX F-S42-1ACA 2 ACHSEN TIEFLADER SAF-ACHSEN LUFTFEDERUNG 1-2. ACHSE IST LENKACHSE TRAGFÄHIGKEIT 35,1 TONNEN WABCO EBS-E LADEFLÄCHE LÄNGE 610CM + AUSZIEHBAR 250CM BREITE DER LADEFLÄCHE 254CM DICKE DER LADEFLÄCHE 20CM Ltsdpfx Abow Dqvws Usa HÖHE DER LADEFLÄCHE +/- 55CM BAGGER STIEL BRUCKE L=315CM, B=75CM, TIEFE=28CM SEITENRUCKSTAHLER HINTEN LADEFLÄCHEVERANKERUNGEN WERKZEUGKASTEN RÜCKLAUFRAD 4 X HEMMSCHUH

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, More vehicles available at Extract from the equipment features. Complete specifications available on request. Gooseneck: Gooseneck in SNT design for optimized deck length, approximately 3,750 mm long. Gooseneck hydraulically liftable/lowerable and detachable. Technical fifth-wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Lowbed: Lowbed with external beams, extendable SUPER LOW design, approx. 6,850 mm in length. Lowbed with fixed hardwood flooring (approx. 40 mm thick) and mechanical locking mechanism. Supply lines are protected within the extendable beams and automatically adapt to the corresponding bed length. 5 pairs of lashing rings foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on inner beams for the installation of bolted RUD rings. Rear running gear: Rear running gear with closed outer frame, checker plate surface and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings foldable outwards (LC 10,000 daN). 1 pair of lashing rings integrated horizontally in the trough LC 16,000 daN. 1 pair of lashing rings integrated horizontally in the trough LC 10,600 daN. 2 pairs of stake pockets for approx. 100 x 50 mm removable stanchions in the outer frame. Pendle Axle: Pendle axle, all axles hydro-mechanically forced-steered. Hose burst valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking plugs for securing in the raised position. Axles finished with 2 coats of 2K paint in a single shade, FAY-grey-34-0260. Technical axle load: 12,000 kg each. Hydraulic axle compensation. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) TPMS: TPMS tire pressure monitoring system according to ECE R 141. Brake system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting pipes to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting. All LED side markers flash with the indicator. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: Complete steel structure automatically shot-blasted after welding. Second blasting with corundum for optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection. Top coat finish with two layers of 2K paint in RAL 3002 carmine red in accordance with RAL system 841GL. Including following additional equipment: - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Remote steering from front & rear via cable remote with push buttons, axle single-track monitoring (installation in tractor not included) - Electro-hydraulic unit (± 45kg) 2 pairs of bolted container locks on the outer beams. Includes 2 pairs of container fastening locks for 1x 20' or 1x 40' container On gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are detachable. (Superstructure length approx. 2,560 mm) (± 46kg) Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw c Lsdpfx Abjxbmn Ue Uota

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, dolžina zabojnika: 19 čevelj, barva: siv, skupna masa: 15.000 kg, največja dovoljena obremenitev: 11.135 kg, lastna masa: 1.945 kg, prostornina tovornega prostora: 10,4 m³, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 750 mm, Price on request. The price applies ex stock 33106 Paderborn! Volume discounts available for purchase of multiple containers. *Leasing/finance available!* 4 units immediately in stock, RAL 7043 6 units available at short notice, other RAL colours selectable. Other models and sizes available ex stock Paderborn. Please feel free to check our current inventory on our website. Roll-off container according to DIN Lsdsv Tz E Njpfx Ab Ujta Technical specification: * Internal dimensions: 6000 x 2300 x 750 mm * Usable capacity: 10.4 cbm * Tare weight: 1945 kg * Floor: 5 mm S235 * Side walls: 3 mm S235 * Front wall angled upwards * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved in accordance with DGUV Rule 114-010 * Floor/side wall connection 90° * Beams: U 90x55x4 mm * Beam spacing: 750 mm * Hook diameter: 50 mm, S355 * Hook height: 1570 mm * Upper frame: round tube Ø 89×6.3 mm * Mesh hooks * All moving parts greaseable * Steel roller 159×6.3 mm, length 300 mm * Warning markings according to DIN 67520 * Inside and outside zinc phosphate primer, exterior coated with synthetic resin paint (80-100 μ) * Permissible total weight: 15,000 kg Subject to errors and prior sale. Photos for illustration purposes only! The price is per unit plus 19% VAT. If you have any questions, please feel free to send us a message or call us.

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Sample of equipment included. Full equipment list available on request. Loading platform: * Low-bed with external beams, extendable in SUPER LOW design, length approx. 6,850 mm * Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism * Supply lines are routed protected within the extendable beams and automatically adapt to the respective low-bed length * 5 pairs of lashing rings, outward-folding (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm * Gooseneck hydraulically lift/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4x2, 6x2 Rear assembly: * Rear assembly in short version, with closed external frame and checker plate cover * Assembly with excavator trough, closed at the rear for accommodation of air tanks * 2 pairs of outward-folding lashing rings (LC 5,000 daN) * 1 pair of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings, fitted at front & rear of the assembly (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Make of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the towing vehicle via standardized EBS interface as per ISO 11992 * For correct display, the towing vehicle must be capable of transmitting and showing this data Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M) Electrical system: * Electrical system as per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with turn signals * ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: * Steel structure made of high-strength, fine-grained steels * Steel grades: * S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel structure shot-blasted automatically with blast wheel machine after welding * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Top coating in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL System 841GL * Rims in silver Ledpfxjxarl Ne Ab Uota * Rear section metallized and painted in RAL 9010 (pure white) * Metallic finishes not possible * Paint system tested according to salt spray test ISO 9227-NSS * Cavities sealed with special wax Including the following additional equipment: * 2-inch king pin * A galvanized steel front wall, approx. 400 mm high * Remote steering front and rear via cable remote control with push buttons, including axle tracking control (without installation on the tractor unit) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings * Electro-hydraulic unit * Prepared for the installation of bolted container positioning devices for 1x 20' or 1x 40' container on t

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) Lsdjv Sw E Aepfx Ab Ujta * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 29.000 kg, skupna masa: 38.000 kg, prva registracija: 08/2020, barva: rdeča, Leto izdelave: 2020, ES-GE 2-Axle Lowbed Trailer, non-telescopic, Tridec Steering Gross Vehicle Weight: 38,000 kg Axle Load (2 x 10,000 kg): 20,000 kg Fifth Wheel Load: 18,000 kg Unladen Weight +/- Manufacturer Tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Total Length: approx. 13,650 mm Total Width: approx. 2,540 mm Loading Platform Length: approx. 13,200 mm Loading Platform Width: approx. 2,540 mm Front Overhang: approx. 1,200 mm Front Radius: approx. 1,750 mm Kingpin Swing Clearance: approx. 2,100 mm Fifth Wheel Height: approx. 1,150 mm B-Dimension: approx. 12,000 mm Raised Platform Length: approx. 3,700 mm Deck Height, Raised Platform: approx. 1,480 mm Lowbed Length: approx. 6,500 mm Deck Height, Lowbed: approx. 250 mm Ground Clearance, Lowbed: approx. 100 mm Deck Height over Axle Assembly: approx. 3,000 mm Tractor Unit Specification A-Dimension: approx. 4,500 mm Fifth Wheel Height: approx. 1,150 mm Kingpin Swing Clearance: approx. 2,100 mm Chassis: - Frame made from high-grade fine-grain steel - Lowbed in rigid design - Axle assembly not detachable - Without excavator boom recess King Pin - 2-inch kingpin Landing Gear - Without front landing legs Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each - Manufacturer: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, central alignment - Axle spacing approx. 1,360 mm Suspension - Air suspension with raise and lower function - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle kingpin steering - All axles steered, brand "Tridec" Tyres - 9 x 245/70 R 17.5 tyres, load index 146/146 F - Manufacturer: Continental - Steel rims Brakes - Dual-circuit air brake system in accordance with EU directives, Manufacturer: "Knorr" - Automatic load-dependent braking force regulator - Standard air couplings red/yellow, per ISO 1726 - Electronic brake system, "EBS", 7-pin socket per ISO 7638, mounted on front in line with EU requirements. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake via spring actuators - 4 wheel chocks with holders - Without flexible connection hoses (Wendeflex) to tractor unit - Air tanks made of aluminium - TIMG2 (Trailer Information Module) mounted for reading current axle loads Underrun Protection - Integrated into rear closure panel Side Frame - Side frame made from UNP steel approx. 200 mm Lodpeu U Np Tefx Ab Usta Load Securing - 13 lashing points per side with 13,400 kg lashing capacity, foldable outward, mounted on outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear of the gooseneck, approx. 400 mm above ground - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear vertical end of the lowbed - 7 stake pockets per side on inner side of the outer frame for stakes approximately 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side, welded on the exterior of the longitudinal beams Flooring - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Checker plate (approx. 8/10 mm) over axle assembly Front Wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, over the entire width of the loading platform, with chamfered corners Side Walls - 3 removable anodised side walls on the gooseneck, approx. 2,440 x 400 mm - Removable galvanised stanchions at the rear Galvanizing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and sin

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 8.049 h, Oprema: pogon na vsa štiri kolesa, Serial number: VATZ1111LZB024460 Road approval Permissible total weight: 6,500 kg Ltedpfjuz Nc Ajx Ab Uea Hydraulic quick coupler 3rd + 4th hydraulic circuit Bucket – cutting width: 1,900 mm Pallet fork – tine length: 1,200 mm Tyres: 405/70 R 20 Modifications, prior sale, and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of a purchase agreement. The binding description is as stated in the sales contract. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may have advertising decals or labels applied. Our general terms and conditions of delivery and payment apply.

Stanje: novo, moč: 160 kW (217,54 KM), vrsta goriva: dizel, barva: rdeča, stanje pnevmatik: 100 odstotek, Leto izdelave: 2023, obratovalne ure: 1 h, številka stroja/vozila: 8259, Oprema: kabina, klimatska naprava, pogon na vsa štiri kolesa, vilice za palete, €251,900 net – Special Offer RTH 6.30 – New machine – with timber felling crane equipment Special promotional price – only for a limited time! MAGNI RTH 6.30 … NEW – TIMBER FELLING CRANE – - NEW / unused / machine has never been operated - Year of manufacture: 2023 - 0 operating hours - Output: 160 kW = 218 HP - Powerful 5.13 L Volvo diesel engine - Emissions Stage V / Tier 5 - Lifting capacity: 6.0 tonnes - Maximum lifting height: 29.8 m - Reach: 26 m with 500 kg lifting capacity at max outreach - for example: 1.0 t lifting capacity at 21 m outreach - Load diagram available on request - 445/65 R 22.5 tyres, 100% condition - Additional double-acting hydraulic line - Radio with USB - Quick coupler with attachment recognition - Hydraulic side inclination - Automatic levelling - Hydraulic scissor-type telescopic stabilizers - Touch-screen display - Pressurised cab - Upper carriage 360° continuous rotation Ltedpoqi Tczjfx Ab Usa - Liebherr slewing drive - Electronic load indicator - Lighting as per German Road Traffic Licensing Regulations (StVZO) - TÜV package + TÜV inspection - Road approval for 40 or 20 km/h - CE certified for Europe Includes: - Radio remote control - Basket control - Air conditioning - Pallet fork FEM or floating type Additional extras included: - Rotating beacon - Extended remote control with saw, outrigger & drive functions - 3x proportional individual control for saw functions via joysticks - Front windshield guard - Mast holes sealed - Boom wipers for extension sections - Saw software with transponder for Westtech CS750 Smart saw €251,900 net Special price ID-8259 RTH 6.30 – New machine – with timber felling crane equipment Work basket, saw basket, asbestos basket, roofers basket, winch from 1.5 to 6.0 t, Lattice mast winch 4.50 m, spreader beam, load hook, bucket, saw – all available immediately The machine has CE approval and documents. All prices are net plus VAT or net export. The machine is located on our premises and can be inspected at any time. This offer is non-binding and subject to prior sale. Errors and interim sale excepted. No guarantee for errors in input. We are happy to provide a financing offer. We supply the complete MAGNI range, immediately available from stock!

Stanje: novo, moč: 160 kW (217,54 KM), vrsta goriva: dizel, stanje pnevmatik: 100 odstotek, Leto izdelave: 2023, obratovalne ure: 1 h, številka stroja/vozila: 8445, Oprema: kabina, klimatska naprava, pogon na vsa štiri kolesa, vilice za palete, Factory new, 360° continuous upper carriage slewing, incl. remote control. Liebherr slewing drive, powerful yet highly sensitive. Work basket, saw basket, asbestos basket, roofer’s basket, winch from 1.5 to 6.0 t, lattice mast winch 4.50 m, spreader beam, lifting hook, bucket, saw, ... -> immediately available MAGNI RTH 6.30 ... NEW - NEW / unused / machine has never been operated - Year of manufacture: 2023 - 0 operating hours - Output: 160 kW = 218 HP - high-performance 5.13 L Volvo diesel engine - Stage V emission standard - Lifting capacity: 6.0 t - Lifting height: 29.8 m - Reach: 26 m with 500 kg lifting capacity remaining - For example: at 21 m reach, still 1.0 t lifting capacity - We are happy to provide you with the load chart. - 445/65 R 22.5 tyres, 100% tread - additional double-acting hydraulic line - Radio with USB - Quick coupler with attachment recognition - hydraulic side tilting - automatic leveling - hydraulic scissor-type telescopic supports - Touch-screen display - pressurized cab Lsdpoqi Hnksfx Ab Usta - Upper carriage slewing 360° continuous - Liebherr slewing drive - electronic load indicator - Lighting according to German traffic regulations (StVZO) - TÜV package + TÜV approval - Road registration for 40 or 20 km/h - With CE marking for Europe - incl. front & rear LED work lights - incl. LED work light on mast - incl. plate holder kit with support plates 60 x 60 x 4 cm - incl. radio remote control - incl. basket control - incl. air conditioning - incl. pallet forks Special price on request ID No. 8445 We supply the complete MAGNI range for you, immediately available from stock! We are an official MAGNI sales & service partner. The machine has CE certification and documentation. Prices are net plus VAT or net for export. The machine is located on our premises and can be inspected at any time. This offer is non-binding and subject to prior sale. Errors and interim sale reserved. The images may show optional extras. We are happy to provide tailored advice. No liability for input errors. We will be happy to provide you with a financing offer.

Stanje: novo, moč: 160 kW (217,54 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, stanje pnevmatik: 100 odstotek, konfiguracija osi: 4x4, tip droga: teleskopski, Leto izdelave: 2023, obratovalne ure: 1 h, nosilnost: 6.000 kg, številka stroja/vozila: 8559, Oprema: kabina, klimatska naprava, pogon na vsa štiri kolesa, vilice za palete, €251,900 net – Special Price MAGNI RTH 6.30 – New Machine – Equipped with Timber Felling Crane – Special offer – For a limited time only! MAGNI RTH 6.30 ... NEW – FELLING CRANE – - BRAND NEW / Unused / Machine has never worked - Year of manufacture: 2023 - 0 operating hours - Engine output: 160 kW = 218 HP - Powerful 5.13 L Volvo diesel engine - Emission Level: Stage V - Lifting capacity: 6.0 t - Lifting height: 29.8 m - Outreach: 26 m with 500 kg lifting capacity remaining - For example: at 21 m outreach, still 1.0 t lifting capacity - We will gladly send you the load chart. - 445/65 R22.5 tyres – 100% tread - Additional double-acting hydraulic circuit - Radio with USB - Quick coupler with attachment recognition - Hydraulic side tilt - Automatic levelling - Hydraulic scissor outriggers - Touch-screen display - Pressurised cab - Upper structure 360° continuous rotation - Liebherr slewing drive - Electronic load indicator - Lighting to StVZO standards - TÜV package + TÜV approval - 40 or 20 km/h road registration - With CE mark for Europe - Radio remote control included - Basket control included - Air conditioning included - Pallet fork FEM or floating included Additional extras included: - Rotating beacon included - Advanced remote control with saw function, outrigger and driving included - 3x proportional individual control for saw function on joysticks included - Front guard for windscreen included - Mast holes closed included - Mast wiper for boom extensions included - Saw software with transponder for Westtech CS750 Smart saw included €251,900 net Ltjdpsu S Ad Eefx Ab Uja Special Price ID-8559 RTH 6.30 – New machine – with timber felling crane equipment – Work basket, saw basket, asbestos basket, roofer’s basket, winch from 1.5 to 6.0 t, Lattice mast winch 4.50 m, spreader bar, lifting hook, bucket, saw -> available immediately The machine is CE certified and comes with documentation. Prices are net plus VAT or net for export. The machine is located on our premises and can be inspected at any time. This offer is non-binding and subject to prior sale. Errors excepted. No liability for input errors. Financing quote available upon request. We supply the complete MAGNI range, immediately available from stock!