Prikolica z nizko platformo

MÜLLER-MITTELTAL T 30,0 Kompakt / 3 Achser / Blatt /Rampen/

Stanje: rabljeno, Leto izdelave: 1999, Payload: 19,990 kg Gross vehicle weight (GVW): 8,010 kg Front tire condition: 70% Rear tire condition: 70% Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 Itjdoutw I Nspfx Ab Uer For further information, please contact PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 20 h, JUWEL 8 M V 5 N 100 OF VF-2025 Lemken Mounted Reversible Plough In standard configuration, additionally equipped with: Version: OF On-land/rough-furrow. Frame Swivel: Frame with hydraulic drawbar Turning Cylinder: with hydraulic tilt adjustment + control unit Tilt Indicator: at the turntable Frame Height: 85 cm, t = 35 (5x) Mouldboard Type: Strip Dural (5x) Support Type: BS42S support on reinforcement. Cranked with hardfacing (5x) Plough Share: Cutting width 42 cm (SB56, strip) Plough Share Version: heavy-duty (5x) Landside: A42H Mouldboard Edge: standard Pendl/Universal Wheel: Universal wheel 340/55-16, inflated Wheel Position: standard Iedjw S N U Tjpfx Ab Uotr Fertilizer Insert Mouldboard: MS2 (5x) Fertilizer Insert Share: Medium, 18 cm Fertilizer Insert Shank Version: standard (5x) Fertilizer Insert Shank Length: standard Throw Angle Adjustment: without throw angle adjustment Disc Coulter: 1 pair D500, smooth, adjacent to drawbar Packarm: Ready for packer arm Lighting System: (EU) preparation, 7-pole connector Working Width per Body: 30-50 cm / 30-55 cm / 36-60 cm Overload Protection: double-cut shear bolt safety BODY SET Lemken Body Set Juwel 8 V L 100 In standard configuration, additionally equipped with: Working Width per Plough Body: 20 - 55 cm Frame Height: 85 cm, t = 35 Support Type: BS42S support on reinforcement. Shares: 2SPS+SB45D/SB56D Landside: A42H Fertilizer Insert: MS2-S245 Fertilizer Insert Shank: standard Landside Disc: 1 pair Suitable for Lemken Juwel 8 M V 5 N 100

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, naslednji pregled (TÜV): 03/2024, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 910 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear supports, side aluminum underrun protection, twin tires, storage box Body: Hydraulic ramps, extendable to 3m. BPW axles, drum brakes, lashing rings on the outer sides. Itedeqpgtmjpfx Ab Uer Ramp length approx. 4000mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete selection of vehicles with immediately and short-term available units can be found on our website. Extract from the equipment. Complete equipment details available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * approx. 2,100 mm = raised front platform incl. gooseneck, front corners chamfered * approx. 5,350 mm = low-bed platform – flat loading area * approx. 850 mm = rear drive-on slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Load height when loaded approx. 870 mm * When operating as a combination, ensure legal overall height and length limits are observed! Frame: * Steel welded construction with front gooseneck and chamfered rear * Drive-on slope with central excavator bucket recess = indentation at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing bars (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out approx. 10 t lashing rings (4x in the low-bed, 1x at the drive-on slope, 2x on the raised platform) * Standard ball race turntable Frame attachments: * Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (track width of construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings. Distribution: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair to the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised platform before the gooseneck, inside the longitudinal beams; 1 pair at the rear of the low-bed before the drive-on slope, in the bucket recess left and right. Draw device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing mount, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-bed axles with drum brakes * Axle load capacity 11 t/axle * S-cam brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 pcs. tyres 235/75 R 17.5, 141J, brand by factory choice * 12 pcs. steel rims 6.75 x 17.5, with offset, silver Brake system/Suspension: * Dual-line air brake system according to ECE regulation R13 * Brake system by Wabco * EBS system 4S3M, sensing on 1st + 2nd axle * RSS/RSP – Stability Program * Spring-loaded parking brake on 2nd + 3rd axles * Steel air tanks * Brake/air connecting lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Elastics as holder for EBS and electrical plugs * Air suspension with lifting and lowering facility (rear axles only), automatic ride height adjustment from 15 km/h (RTR), axle stop on front axle Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 – 10 mm above the upper frame edge * Steel checker plate covers above wheels Ramps: * 2 pcs. foldable single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with hardwood floor approx. 35 mm, impregnated * Ramps adjustable in width from intermediate gap approx. 350 mm to max. overall width approx. 3,000 mm * Ramps can be locked in driving position by chains with tensioner Itjdpowx Dcyofx Ab Usr * Ramp lifting aid with spiral spring * Ramps can be moved manually sideways with

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, skupna dolžina: 13.600 mm, skupna širina: 2.500 mm, skupna višina: 900 mm, vzmetenje: zrak, velikost pnevmatike: 7.50 R20, barva: drugo, Konfiguracija osi Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Sprednja os: Velikost pnevmatik: 7.50 R20; dvojna montaža; Maks. osna obremenitev: 8.000 kg; Znamka osi: BPW Zadnja os 1: Velikost pnevmatik: 445/45 R19.5; Maks. osna obremenitev: 8.000 kg; Znamka osi: ROR Zadnja os 2: Velikost pnevmatik: 445/45 R19.5; Maks. osna obremenitev: 8.000 kg; Znamka osi: ROR Zadnja os 3: Velikost pnevmatik: 445/45 R19.5; Maks. osna obremenitev: 8.000 kg; Znamka osi: ROR Teže Lastna teža: 7.500 kg Nosilnost: 26.500 kg Skupna dovoljena masa: 34.000 kg Stanje Tehnično stanje: dobro Itedpfx Asur Sx Hjb Uor Vizualno stanje: dobro Poškodbe: nobenih

Stanje: rabljeno, številka stroja/vozila: GE12/084/2023, lastna masa: 7.000 kg, največja dovoljena obremenitev: 17.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1998, vzmetenje: jeklo, Oprema: osrednja vrtljiva plošča, Vehicle from 1st owner Goldhofer TU3-24/80 Low loader Service history maintained Inspection book Hydraulic ramps Payload – 17,000 kg Lashing eyes in the loading area Itodemx U Dpopfx Ab Ujr Commercial/export net price – €9,990 Subject to alterations, prior sale, and errors excepted. ===== Telephone Mobile =====

Stanje: rabljeno, največja dovoljena obremenitev: 13.470 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 7.075 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2023, Oprema: ABS, Immediately available stock vehicle with registration dated 07/2024 ABS, EBS-E, RSS, 2 x 10 t axles (Gigant), steel rims, 235/75 R17.5 tires, drum brakes, automatic slack adjusters, air suspension, lift/lower function, WABCO SmartBoard, weight detection / axle load display via EBS CAN bus signal for display in the truck cab (vehicle must be appropriately prepared, not a certified scale), release valve on front axle, spring-loaded parking brake on rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made from galvanized steel approx. 1,000x300x600mm, storage compartment for container net approx. 1,000x300x600mm, closed side underrun protection, fixed underrun bar, rear apron on underrun bar, folding A-sign, ramp compartment incl. aluminium loading ramps (2,800 mm long, 470 mm wide, approx. 10,600 kg pair load capacity), hot-dip galvanized chassis, module lights partially with LEDs, two additional LED reversing lights on rear of vehicle. Load securing package: 8 pieces UVV safety lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the outer frame (protruding over material thickness). Arrangement: 1 pair in front of rear carrier / 3 pairs on flatbed area, 1 pair of folding lashing eyes (LC 13,500 daN) on front wall crossmember, 3 pairs of folding lashing eyes (LC 10,000 daN) recessed into outer frame, 8 repositionable trough stops for lateral centering of skip containers, front 4 trough stops inserted with swinging stop. Duomatic coupling head / 15-pin power supply Drawbar 2,100mm plus 500mm lowering device / 40mm DIN towing eye Truck coupling height: approx. 780–980 mm Container length: 5,500 mm – 7,000 mm internal, for 2 x 10 m³ skip containers or construction machinery transport Overall height: approx. 950 mm when unladen (centering edge 970 mm) Technically permissible gross weight up to 20,000 kg Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, truck cranes and aerial work platforms... Contact us! Iedjugzqtjpfx Ab Uetr Financing required? We will gladly provide you with a non-binding financing offer. This offer is subject to change, without guarantee or warranty. Sale subject to prior sale. A reservation requires a down payment of 10% of the purchase price. There is no reservation or claim to availability until the payment is received. The purchase is concluded only upon receipt of payment. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment is received. Payments are accepted exclusively in euros without additional fees for the seller and only via bank transfer or cash. No cheques.

Stanje: rabljeno, največja dovoljena obremenitev: 14.826 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2025, dolžina tovornega prostora: 7.000 mm, Leto izdelave: 2025, Oprema: ABS, 2-axle 18-ton Hüffermann sled roll-off trailer "NEW" Type HSA 3 / 20.71 ZB ?Sled-Carrier? for container lengths from 5.0 m up to max. 7.0 m, SAF axles 2x 10,000 kg air-suspended with automatic lowering when disconnecting the brake, Wabco braking system, ABS, disc brakes with electronic brake and stability system EBS-E and RSS (Significant reduction of the risk of rollover, reduced brake pad wear), weight detection/axle load display via EBS Canbus signal for display in the cab (truck must be pre-equipped accordingly), tire pressure monitoring system according to ECE Regulation 141, automatic slack adjusters, certified load securing with 4-way pneumatic locking system, lateral underrun protection in anodized and closed design, V-drawbar approx. 2600 mm long, 40 mm towing eye, toolbox 600 x 500 x 500 mm, tires 265/70 R 19.5 // 8 units, Hella module lights partly LED, flashing LED side marker lights, additionally 2x LED reversing lights, LED position lights front and rear, A-plate and ADR-plate foldable, side contour markings in white, rear in yellow, underrun protection with bump stop and rear apron, 15-pin power supply, Duomatic coupling head, painted in RAL color DB 7350 Novagrau, silver rims, axles black KTL-coated, attachments hot-dip galvanized, gross weight 18,000 kg, technically possible 20,000 kg, new vehicle, immediately available from stock Bünde, without initial registration incl. manufacturer's warranty, sale to commercial customers only! All information without guarantee! Errors and prior sale reserved! Iodpfx Aet Iqhlob Uotr

Stanje: rabljeno, največja dovoljena obremenitev: 18.610 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 7.075 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, Leto izdelave: 2023, Oprema: ABS, Immediately available stock vehicle with day registration in 07/2024. ABS, EBS-E, RSS, 3 x 9 t axles (Gigant), steel rims, 235/75 R17.5 tires, drum brakes, automatic slack adjusters, air suspension, lift/lower function, 2nd axle as lifting axle, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal shown on driver’s cab display (truck must be pre-equipped, not a calibrated scale), release valve on front axle, spring-loaded brake on rear axle, two pairs of pneumatic container locks for roll-off containers, toolbox made of galvanized sheet steel approx. 1,000 x 300 x 600 mm, storage box for container net approx. 1,000 x 300 x 600 mm, closed side underrun protection, fixed underrun guard, rear skirt on underrun guard, foldable A-sign, ramp compartment incl. aluminium loading ramps (2,800 mm long, 470 mm wide, approx. 10,600 kg load capacity per pair), hot-dip galvanized chassis, combination lights partly LED, 2 extra LED reversing lights at the rear. Load securing package: 8 units of UVV-certified folding lashing brackets (LC 8,000 daN) mounted to existing hole pattern on outer frame (protruding over material thickness) – arrangement: 1 pair in front of rear crossmember, 3 pairs in the flatbed area; 1 pair foldable lashing eyes (LC 13,500 daN) on bulkhead carrier; 3 pairs of foldable lashing eyes (LC 10,000 daN) recessed in outer frame; 8 repositionable container stops to laterally center demountable containers, front 4 stops positioned with pivoting hold. Iodpfx Ajugzqysb Uetr Duomatic coupling head / 15-pin power supply Drawbar 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Truck coupling height: approx. 780-980 mm Body length: 5,500 mm - 7,000 mm i.Li. or 2 x 10 cbm roll-off containers or construction machinery transport Build height: approx. 950 mm (unladen vehicle, centering edge 970 mm) Technically up to 27,000 kg GVW possible Multiple units available! Hüffermann Krandienst GmbH: We trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, truck cranes and work platforms… Contact us! Financing wanted? We will gladly prepare a non-binding financing offer for you. This offer is non-binding and without guarantee or warranty. Subject to prior sale. A deposit of 10% of the purchase price is required for reservation. No reservation or claim to availability exists until payment is received. The purchase is only concluded once payment has been received. The vehicle remains the property of Hüffermann Krandienst GmbH until payment is made in full. Payments accepted only in euros, free of charge for the seller, by bank transfer or cash. No checks accepted.

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * Load securing package * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded brake cylinders * 2 x 12-ton Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and adjustable height * Tool box made of powder-coated sheet steel, mounted on right side * Side and rear contour marking tape (reflective) * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact protection buffer * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with elevated outer frame (approx. 25 mm higher) for guiding roll-off containers Itedpfx Ajl Thwcjb Uor * Steel floor with wheel recesses in the bogie area * Suitable for transporting roll-off containers from 5,500 to 7,000 mm in length * Pneumatic 4-point locking clamp and mechanically insertable stop angles in the track at the front, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip loaders with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops pluggable with pendulum stop * 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements for positive and non-positive load securing of skips, plus 4 lashing tracks in cloverleaf design (side) and 1 pair of 13.4-ton UVV lashing rings at the front, load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip covering in the running area of the ramp incline * Rear mechanical support legs * 1 pair aluminum drive-on ramps (10.6 tons/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * 235/75 R 17.5 twin tires * Unladen weight 4,360 kg * Technically permissible gross weight 20,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf