Teleskopski viličar

Manitou MT933 EASY 75D ST5 S1 Valid inspection, *Guarantee

Stanje: rabljeno, moč: 55 kW (74,78 KM), vrsta goriva: dizel, dvižna višina: 9.070 mm, Leto izdelave: 2024, obratovalne ure: 141 h, Unladen weight: 7,320 kg Engine make: Deutz Kfodsutwitjpfx Ab Uea Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000V01125256 Front tyre condition: 100% Rear tyre condition: 100% Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m Please contact PFEIFER GROUP for further information.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.180 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2024, Standard Equipment Basic Series models always in stock Vacuum Suction Tank STS VR-1.5 Rear Tipper 1,500 L Tank • 1,500-liter tank capacity • Rear tipper with wired remote control Kodpfxoutcq As Ab Uefa • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side rinsing opening in the tank for removing dirt or blockages without opening the tank lid • Tank lid opens completely towards the passenger side and is secured with hook bolts • Two integrated safety levels as standard to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Manometer mounted on the suction assembly with protective guard • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Industrial Engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to protect the engine compartment • Silencer for vacuum compressor with oil collector • Stainless steel heat shield above the exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder • 5L petrol canister in bracket • Standard funnel with long neck for easy changing and refilling of engine oil • All engine components and accessories stored in lockable engine box Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 2.7t • Track width identical to car and Sprinter for optimal driving • Lowest possible center of gravity for the suction tank • 2 axles each with 1,350 kg load capacity, independent wheel suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with lamp housings • Stake brackets for quick securing of suction hoses with rubber bands • Storage space for tools and accessories between engine enclosure and tank body Suction Tank • Overrun brake with reverse automatic • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot connection (3”) on the lower part of the tank lid • 1x Perrot connection (3”) on the right-hand side in the direction of travel If you are looking for something other than this unit, please do not hesitate to contact us directly. Our in-house vehicle construction division can fulfill nearly every requirement. For further detailed information and/or photos, please contact us directly. You will also find a large selection of other vehicles for SALE or RENT with us. Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our terms and conditions and excludes any warranty.

Stanje: rabljeno, moč: 55 kW (74,78 KM), vrsta goriva: dizel, dvižna višina: 9.070 mm, Leto izdelave: 2024, Unladen weight: 7,320 kg Kjdpfxoutw Nge Ab Uofa Engine brand: Deutz Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000V01124821 Front tyre condition: 100% Rear tyre condition: 100% Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m Contact PFEIFER GROUP for further information.

Stanje: rabljeno, moč: 55 kW (74,78 KM), vrsta goriva: dizel, dvižna višina: 9.070 mm, Leto izdelave: 2024, obratovalne ure: 245 h, Unladen weight: 7,320 kg Engine brand: Deutz Lifting capacity: 3,300 kg Kodpjuty Eqjfx Ab Uefa Maximum speed: 25 km/h Serial number: MAN00000C01124485 Front tyre condition: 100% Rear tyre condition: 100% Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m Contact PFEIFER GROUP for further information.

Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Gooseneck: - Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom - Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece - Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of folding-out lashing rings (LC 5,000 daN) - 3 pairs of folding-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) One-Piece Steel Ramps: - 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting system, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load per axle: 12,000 kg - Electro-magnetic reverse lockout, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF, brand of our choice - TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data. Brake System: - WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - 24 Volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: Kfodpfsw Tpqwjx Ab Uea - Complete steel structure automatically shot blasted with a turbine blasting system after welding - Second blasting process with corundum for optimum coating adhesion - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection - Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system - Rims in silver - Rear section metallized and in RAL 9010 (con...

Stanje: rabljeno, Leto izdelave: 2024, nosilnost: 4.000 kg, dvižna višina: 13.530 mm, vrsta goriva: dizel, gradbena višina: 2.450 mm, moč: 75 kW (101,97 KM), stanje pnevmatik: 50 odstotek, velikost sprednje pnevmatike: 400/80-24, velikost zadnje pnevmatike: 400/80-24, barva: drugo, Special equipment: 3rd hydraulic valve, 4th hydraulic valve, rear work lights, front work lights, heating, full cab. Special equipment description: Driver protection roof, 3rd and 4th control circuit, 2 front LED work lights, 2 rear LED work lights, rear license plate illumination, rear power socket, interior rearview mirror, radio, diesel pre-heater, negative brake, Easy Link standard module, platform preparation, TÜV preparation for 20 km/h. Ksdpfx Ajvi R Huob Ujfa

Stanje: rabljeno, številka stroja/vozila: MAN00000C01086062, Leto izdelave: 2022, obratovalne ure: 815 h, dvižna višina: 3.700 mm, vrsta goriva: dizel, moč: 37 kW (50,31 KM), proizvajalec motorjev: Kubota, vrsta prenosa: hidrostat, Dvižna zmogljivost: 2.500 kg Gradbena višina: 209 cm Kedpfeuww H Ujx Ab Usfa Stanje prednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Transportne mere (D x Š x V): 4,19x1,45x2,08 Za dodatne informacije se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 2.400 h, nosilnost: 5.000 kg, dvižna višina: 5.500 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.910 mm, moč: 55 kW (74,78 KM), stanje pnevmatik: 100 odstotek, velikost sprednje pnevmatike: AS 340 -80 R18 XMCL, velikost zadnje pnevmatike: AS 18-22.5 163A8 MPT-, lastna masa: 7.760 kg, skupna dolžina: 3.755 mm, barva: drugo, Attachments: sideshift, special equipment: 3rd valve, 4th valve, full cabin, full free lift, CE certificate, Kedpsvggigefx Ab Uefa

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 933 h, nosilnost: 3.500 kg, dvižna višina: 11.050 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.420 mm, moč: 55,4 kW (75,32 KM), proizvajalec motorjev: DEUTZ, širina nosilnega okvirja vilic: 1.120 mm, dolžina vilic: 1.200 mm, stanje pnevmatik: 98 odstotek, skupna višina: 2.420 mm, skupna dolžina: 6.550 mm, skupna širina: 2.350 mm, barva: rdeča, velikost pnevmatike: 15.5 / 80 - 24, Oprema: kabina, nastavljiva roka, osvetlitev, pogon na vsa štiri kolesa, spojka prikolice, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1135 ST3B TURBO 4x4x4, first operation: 2019. Lifting capacity: 3,500 kg. Lifting height: 11.05 m. Forks: fork length 1,200 mm, fork carriage width 1,120 mm. Load protection guard, quick coupler. Engine: 4-cylinder DEUTZ turbo diesel (type: TD 3.6 L4 – 75.34 HP / 55.40 kW at 2,200 rpm). Drivetrain: Full-time all-wheel drive (4x4x4) and all-wheel steering – includes crab steering mode. Hydraulic outriggers (2x). Overload warning system. Cab: Spacious operator cab, CPB, comfort seat (KAB), ROPS/FOPS certified. Trailer hitch, road lighting, warning beacon / warning buzzer, four exterior mirrors, dual windshield wipers, heating/ventilation. Tyres: Rough terrain tyres (15.5/80-24), tread depth all around approx. 98%. Transport dimensions: Length approx. 6,550 mm (approx. 5,370 mm without forks), width approx. 2,350 mm, height approx. 2,420 mm. Financing possible / worldwide transport at favorable rates / for export, only net price to be paid © pb Kedpfxsu Dkf Re Ab Ujfa

Stanje: novo, številka stroja/vozila: 14263, Leto izdelave: 2024, obratovalne ure: 18 h, nosilnost: 2.500 kg, dvižna višina: 3.400 mm, prosto dvigovanje: 1.200 mm, gradbena višina: 2.070 mm, velikost sprednje pnevmatike: 12,5/80-18, velikost zadnje pnevmatike: 27x10-12, skupna masa: 4.460 kg, tip motorja: Diesel, proizvajalec: Manitou Kfedpfxsw Ayxlo Ab Uja