Teleskopski nakladalnik

Merlo TF 42.7 CS-136

Operating hours: 142, First registration: 16/01/2024

Maximum lifting capacity: 4,200 kg
Maximum lift height: 7,000 mm
Maximum outreach: 3,800 mm
Length to carriage: 4,730 mm
Width: 2,310 mm
Height: 2,530 mm / 2,590 mm (CS activated)
Total weight with forks: 8,170 kg
Total weight without forks: 8,000 kg
Engine: 4-cylinder Perkins 904J, 3.6 l displacement, water-cooled
Power: 100 kW (136 hp) at 2,300 rpm
Hydraulic reversible fan
Emission Stage V
Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR)
Hydrostatic drive system
Pump: electronically controlled with variable flow rate
Motor: variable displacement motor
EPD PLUS including optional automatic speed increase
Mineral hydraulic oil HVI 46
Transmission: 2-speed, electrohydraulic control
Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h
Cab: fully enclosed, split door, 360-degree visibility
GRAMMER air-suspended seat with lap belt, ROPS/FOPS certified
Heating
Front, roof, and rear wipers
Sun blind
4x1 electronic joystick with capacitive release including direction selector
CS = hydropneumatic cab suspension
Telescopic boom: 2-part with electronic end position damping (Soft Stop)
Quick-attach tool carrier system Type “ZM2”, hydraulically operated from the cab
Steering: hydraulic
3 steering modes: all-wheel, front-wheel, crab steering
Drive: permanent all-wheel drive
Axles: front fixed, rear oscillating
Brake system: power-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off
Chassis: high-strength steel construction
Hydraulics: variable-output pump “LOAD SENSING”, work hydraulics flow 151 l/min, fan hydraulics flow 46 l/min, total 197 l/min, working pressure 250 bar,
Flow-sharing control block

Electrics: 12 V, 100 Ah battery, 120 A alternator
Stability control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alert, attachment recognition, and overload cut-off
Tyres: 460/70 R 24
Standard equipment:
- Power-assisted brakes
- Hydraulic oil cooler
- Rear plate for trailer hitch installation
- Hydraulic reversible fan
- Radio preparation
- Working lights on cab (2 front, 2 rear)
Ibjdpfxjpcht Hs Ab Uof
- Boom head auxiliary circuit preparation
- 2 hydraulic connections at boom head
- Load protection grille at tool carrier
- Road lighting
- Automatic battery main switch
- Electrical cable in boom
- Acoustic reverse travel signal
- Lift cylinder support for safety

Special equipment:
- EU road registration as tractor/towing vehicle 40 km/h incl. automatic trailer coupling, 30/32 mm pin, incl. trailer lighting connector
- Air conditioning
- Boom suspension (B.S.S.)
- LED work lights on cab (2 front, 2 rear), 2 work lights at end of first boom section
- ASCS upgrade: screen with all ASCS functions + data

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.