Unsinn K Prikolice nakup rabljenega (144)

Stanje: novo, Three-way tipper with electric pump, cordless drill pump & mesh extension Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 985 kg Payload approx.: 2,515 kg (payload specifications may vary depending on equipment and design) Mesh extension with integrated pendulum mounting in the corner stanchions, foldable on all four sides With the innovative hinge solution of the KombiLine, the superstructures can be folded down easily in just a few steps. This makes loading and unloading the trailer especially ergonomic, straightforward and time-saving. Godpfx Aey I Ezcop Eoud Electrohydraulic pump with emergency pump function "Pumpless" for easy tipping using a cordless screwdriver in case of low battery power Integrated battery charger with 230 V plug Battery and pump unit securely and dirt-protected stored in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (ramps can be easily retrofitted) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Fully welded and hot-dip galvanized steel frame profile Massive steel bed running the full width of the vehicle Maintenance support to secure the raised platform Reinforced automatic support wheel Shunting handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 14 recessed lashing points in the steel bed Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Side panels fully foldable and removable Rear panel with fold-down steel plating, including anti-slip protection for loading ramps Robust cam lock fasteners on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin connector and reversing light Including registration documents Available options and accessories for this trailer: Side wall extension Loading ramps Support legs Load securing net Anti-theft protection Registration of your new trailer at the vehicle registration office

Stanje: novo, Three-way tipper with E-pump & cordless screwdriver pump, loading ramps and support stands Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency pump function 'Pumpless', allowing tipping via cordless screwdriver in case of low battery Godpfxoy I Eu Ne Ap Esud Integrated battery charger with 230 V plug Battery and pump unit are securely stored and protected from dirt in the battery compartment Aluminium loading ramps, 2560 x 300 mm, load capacity 2800 kg per pair Integrated ramp compartment with tensioning device and foldable license plate holder for storing the ramps under the loading platform Robust drop-down support legs Unique, torsion-resistant longitudinal chassis frame for improved driving stability and safety Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor running the full width of the vehicle Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Cargo securing system for increased flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing points on and under the loading floor, each rated up to 1500 kg and rotatable 360° Sidewalls fully foldable and removable Rear sidewall, steel-plated, foldable with anti-slip lock for loading ramps Robust cam lever locks on the sidewalls 4 removable steel corner posts Lighting system with 13-pin connector and reverse light Including vehicle documents Optional features and accessories for this trailer: - Sidewall extension - Mesh extension - Load securing net - Anti-theft device - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Special price! Stock vehicle from 2022! No initial registration! 9929942 Box trailer with double-wing rear door and sales flap Manufacturer: Unsinn Model: ULK 2636-14-1750 Internal dimensions: 3660 x 1750 x 1940 mm (LxWxH) Gross vehicle weight: 2600 kg Unladen weight: approx. 640 kg Payload: approx. 1960 kg (actual payload may vary depending on configuration and construction) Loading height: 550 mm Colour: white Sales flap on the right in the direction of travel 2 gas springs and wind support Walls made from lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Godpfx Ajy I Eptjp Ejud Smooth GRP exterior walls ideal for signage/wrapping Steel-reinforced interior walls ensure high impact resistance Double-wing rear door with high-quality aluminium hinges Robust stainless steel rotary bar lock (lockable) on rear doors Stainless steel door retainers Load floor made from 18 mm multi-bonded phenolic resin plywood, slip-resistant and waterproof Lashing system with 8 moveable lashing rings for optimal load securing Lashing rail on the side and front walls, 900 mm height Transparent roof for high light transmission Rear frame and edging profiles made from special anodised aluminium profiles Magnetic, swivelling LED interior light with motion detector (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front position lights Two manoeuvring handles on the front wall AL-KO coupling head with impact protection Including vehicle documents Options and accessories available for this trailer: - Shock absorbers incl. 100 km/h certificate - Spare wheel incl. bracket - Anti-theft device - Prop stands - Custom interior fitting - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Special price! Stock vehicle from 2023! No prior registration! 9931385 Refrigerated Trailer – Tandem Axle Manufacturer: Unsinn Gusdpfsy I Epmox Ap Eed Model: UKT 6C 3015-26-14 Dimensions: 3000 x 1500 x 1900 mm (L x W x H) Gross vehicle weight: 2600 kg Unladen weight: approx. 775 kg Payload: approx. 1825 kg (payload may vary depending on configuration and construction) Unique, torsion-resistant aluminium chassis 4 robust telescopic crank supports for up to 6000 kg static load capacity Thermo-sandwich body construction Inner and outer panels made of hot-dip galvanized and powder-coated steel sheet for high durability Insulation: 40 mm PU core Exterior colour: Silver RAL 9006 Double-wing rear doors with aluminium hinges Refrigerated compartment lever latch Rear frame and edging profiles made of anodized special aluminium sections for an attractive design Loading area made of multi-bonded, durable 18 mm thick phenolic resin-coated plywood 200 mm high impact protection on three sides at the bottom Cooling unit: Arktik 1600 N Cooling capacity: 1600 watts at compartment temperature of +6°C and ambient temperature of 30°C Temperature control range from +2°C to +10°C Power supply: 230 Volt 50 Hz Evaporator air flow rate: 750 m³/hour Fully enclosed unit, outdoor housing mounted at the front, top Environmentally friendly, CFC-free refrigerant Electronic automatic evaporator defrost Lockable control display Reinforced jockey wheel Electronic digital thermostat for optimal temperature regulation Interior lighting Lighting with 13-pin plug Reversing lights Available options and accessories for this trailer: Shock absorbers including 100 km/h type approval Spare wheel including holder Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Motorcycle Trailer Manufacturer: Unsinn Model: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm (LxWxH) Gross vehicle weight: 1,800 kg Payload: approx. 1,300 kg (payload may vary depending on equipment and configuration) Unladen weight: approx. 500 kg Loading height: 460 mm Unique, torsion-resistant longitudinal beam chassis for stable handling, fully hot-dip galvanized Superstructure: 3 sides made of robust steel profile Continuous loading ramp allows access across the entire width of the loading area Certified for 100 km/h operation With self-adjusting brakes Continuous loading ramp allows access across the entire width of the platform Folding license plate holder installed Robust plastic mudguards fitted Secure and quick lashing all around the outer frame 1 lashing ring on the loading area, centered at the rear Reinforced, automatic jockey wheel for safe parking of the loaded trailer Floor made from 18 mm multiple-bonded phenolic plywood, seamless, anti-slip and waterproof Loading angle when ramp is lowered: approx. 5° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering device and safety lock (only on braked version) Incl. vehicle documents Available options and accessories for this trailer: - Motorcycle stand - Removable aluminum side extension, 400 mm - High canvas cover, 1500 and 1700 mm in various colors - Winch stand without cable winch - Hand cable winch, 900 kg - Spare wheel bracket for AS series with mounting kit Gedpfx Aey I Eiysp Eoud - Spare wheel 175/70 R13 - Electro-hydraulics mounted in container, with battery and charger, without emergency hand pump - Foldable lashing rings - Motorcycle tie-down straps * Registration of your new trailer at the local vehicle registration authority

Stanje: novo, Box trailer as high loader Manufacturer: Unsinn Model: UKH 5424-30-13 Internal dimensions: 5460 x 2400 x 2100 mm (LxWxH) Godsy I Egfjpfx Ap Esud Gross vehicle weight: 3000 kg Unladen weight: approx. 1220 kg Payload: approx. 1780 kg (payload may vary depending on configuration and design) Exterior color: silver RAL 9006 Unique, torsion-resistant longitudinal beam chassis made from a robust steel frame for safe driving characteristics, fully hot-dip galvanized Walls made from insulated thermo-panels, steel sandwich construction Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Interior and exterior sheeting made from galvanized and powder-coated steel sheet for heavy-duty use 45 mm PU core insulation Double-wing rear door with aluminum hinges Stainless steel rod lock Additional rod lock on the left rear door Stainless steel door holder Load area made from multi-glued phenolic plywood, 18 mm, anti-slip, waterproof Extra interior height: 2100 mm Aluminum edging profiles for a stylish appearance 2 maneuvering handles mounted on the front wall profile Including vehicle documents Possible additional options and accessories for this trailer: Custom interior fittings Anti-theft device

Stanje: rabljeno, Young used trailers from our large rental fleet! Unsinn box trailer with thermo-sandwich construction Manufacturer: Unsinn Model: KK 3048-14-1750 Internal dimensions: 4860 x 1750 x 2100 mm (L x W x H) Gross vehicle weight: 3000 kg Unladen weight: approx. 1005 kg Payload: 1995 kg (payload may vary depending on equipment and configuration) Thermo-sandwich construction Inner and outer panels made of hot-dip galvanized and powder-coated steel Insulation: 40 mm PU core Exterior colour: silver RAL 9006 Plywood double wing rear door with robust aluminium hinges Door holder Stainless steel lockable rod latch Rear frame and edging profiles made from special aluminium profiles Load floor made of multi-glued phenolic plywood, 18 mm, slip-resistant surface 10 recessed tie-down points in the floor (4 per side) Torsion-resistant, stable longitudinal beam chassis for high point loads and safe driving characteristics Frame fully welded and hot-dip galvanized by immersion Reinforced automatic support wheel, load capacity 500 kg 13-pin plug Reversing lights Marker lights 2 maneuvering handles AL-KO coupling head with collision protection First registration: 13.03.2026 Workshop-inspected New technical inspection (TÜV) available on request Godpfx Apsy I Efuo Eoud Possible additional options and accessories for this trailer: - Spare wheel - Load securing bars for optimum load safety - Shock absorbers including 100 km/h certificate - Interior lighting - Lashing rings in the floor * Also available with rear ramp and/or side door

Stanje: rabljeno, Rabljeni spustni prevoznik za stroje Proizvajalec: Unsinn Tip: AS 826-13-1550 Mere: 2600 x 1550 x 150 mm d.š.v. Dovoljena skupna masa: 750 kg Gjdoy I Eafjpfx Ap Ejud Višina nakladanja: 310 mm Vezalna točka na nakladalni površini zadaj na sredini Ojačano samodejno podporno kolo Nagib rampe v spuščenem stanju cca 13° Razsvetljava s 13-polnim vtičem in vzvratno lučjo Datum prve registracije: 26.04.2016 Servisno pregledan Na željo z novim TÜV

Stanje: novo, Special offer! Stock trailer from 2023! No initial registration! 9931235 Box trailer with double-wing rear door and sales flap Manufacturer: Unsinn Model: UKU 421719-26-14 VKL Internal dimensions: 4260 x 1750 x 1940 mm (L x W x H) Permissible total weight: 2600 kg Unladen weight: approx. 640 kg Payload: 1960 kg (payload figures may vary depending on equipment and design) Loading height: approx. 550 mm Colour: white Sales flap on the right in the direction of travel Unique Panel walls made of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal signage/wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Double-wing rear door with high-quality aluminium hinges Robust stainless steel rotary bolt lock (lockable) on rear doors Stainless steel door retainers Loading area made of multi-bonded 18 mm phenolic plywood, anti-slip and waterproof Lashing system with 8 movable lashing rings for optimal load securing Slat lashing rail on the sidewalls and front wall, height 900 mm Transparent light roof with high light transmission Gusdpsy I D N Ssfx Ap Eed Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light incl. motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front position lamps Two manoeuvring handles on the front wall AL-KO coupling head with collision protection Incl. vehicle documents Possible options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Rear-mounted support legs Custom interior fittings Spare wheel incl. holder Anti-theft device Registration service for your new trailer at the road traffic office

Stanje: novo, Box trailer with ramp and sales flap Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: approx. 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2,000 kg Unladen weight: approx. 575 kg Payload: approx. 1,425 kg (Payload may vary depending on equipment and configuration) Smooth GRP exterior panels for optimal signage/wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Rear ramp Robust stainless steel bar lock (lockable) on the ramp Stainless steel door retainers Side sales flap on the right (in the direction of travel), equipped with a robust, lockable stainless steel bar lock Side flap dimensions: approx. 2500 x 1440 mm (L x H) Loading floor made of 18 mm multi-glued screen printing plate, slip-resistant and waterproof Lashing system with 8 movable lashing rings for optimal cargo securing Lashing rail on side and front walls, height 900 mm Transparent roof for high light transmission Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light with motion sensor (positionable anywhere inside the interior) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reverse light Front marker lights Two manoeuvring handles on the front wall ALKO coupling head with collision protection Includes vehicle documents Optional equipment and accessories for this trailer: Shock absorbers including 100 km/h approval Spare wheel including holder Stanchion supports Gjdpjy I D N Eofx Ap Eoud Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading Area Dimensions: 3660 x 1750 x 1200 mm (L.W.H.) Gross Vehicle Weight Rating: 3500 kg Unladen Weight: 1245 kg Payload: 2255 kg (payload specifications can vary depending on equipment and construction) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers as a prerequisite for 100 km/h approval Steel floor across the entire width made from a single, bent piece Patented load securing system with 14 lashing pins on and under the loading area Each pin rated at 1500 daN (kg), 360° rotatable Side panels fixed on three sides Rear drop gate Removable aluminium partition for flexible compartmentalisation at various positions Sturdy folding rear support legs ensure stable positioning even when detached Electric pump Manual emergency pump, pumpless system Additional hydraulic connection for towing vehicle 2 rear work lights Lighting system with 13-pin plug Reversing lights Gedpfx Apsy I D Nxe Eoud 2 plastic toolboxes, splash-water protected, mounted left and right under the loading area Flat tarp for protection of dried firewood in bad weather, including storage compartment on the front board Vehicle documents included Available options and accessories for this trailer: 100 km/h approval certificate Spare wheel including holder Anti-theft device Drawbar cover Registration of your new trailer with the local road traffic office

Stanje: novo, Three-way tipper with electric pump & cordless screwdriver pump and side wall extension Gujdpjy I Dydofx Ap Ejd Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: approx. 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) With the innovative hinge system of the KombiLine, the extensions can be conveniently folded down in just a few quick steps, making loading and unloading the trailer especially ergonomic, easy, and time-saving. Electrohydraulic pump with backup manual pump for easy tipping using a cordless screwdriver in case of low battery. Integrated battery charger with 230 V plug. Battery and pump unit are securely stored in the battery box, protected from dirt. Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the loading platform (for easy retrofitting of loading ramps). Maintenance support strut for securing the tilted platform during maintenance work. Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability. Closed, fully welded and hot-dip galvanised steel frame profile. Continuous solid steel floor across the entire vehicle width. Reinforced automatic jockey wheel. Maneuvering handle with practical ratchet strap reel for easy handling. Load securing system for increased flexibility and efficiency in load securing, DEKRA certified. 10 recessed lashing pins fitted in the steel floor. Lashing pins above and below the loading platform, each with a load capacity of up to 1500 kg and 360° rotatable. Side walls completely foldable and removable. Tailgate with foldable steel plank including anti-slip protection for loading ramps. Robust cam lever locks on the side walls. 4 removable steel corner stanchions. Lighting with 13-pin connector and reversing light. Incl. vehicle documents. Available options and accessories for this trailer: Aluminium loading ramps Load securing net Supports Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Special offer! In-stock vehicle from 2024! Never registered! 9933125 Box trailer with double rear doors and side door on the right in the direction of travel Manufacturer: Unsinn Model: ULK 2642-14-1750 Internal dimensions: 4260 x 1750 x 1940 mm (LxWxH) Permissible gross weight: 2600 kg Unladen weight: approx. 640 kg Payload: approx. 1960 kg (payload figures may vary depending on equipment and configuration) Loading height: 550 mm Colour: white Side panels made from lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal trailer signage/foil wrapping Steel-reinforced interior walls ensure high impact resistance Double rear doors fitted with high-quality aluminium hinges Robust stainless steel bar lock (lockable) on rear doors Stainless steel door retainers Loading floor made of multi-bonded 18 mm phenolic resin-coated plywood, anti-slip and waterproof Cargo securing system with 8 movable lashing rings for optimal load securing Slatted lashing rails fitted to the side and front walls at 900 mm height Translucent roof with high light transmission Rear frame and edging profiles made from special anodised aluminium sections Magnetic, swiveling LED interior light incl. motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front marker lights Two maneuvering handles on the front wall ALKO coupling head with impact guard Including registration documents Optional equipment and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Side supports Custom interior fittings Registration of your new trailer at the vehicle registration office Guedpjy I Dxtsfx Ap Eed

Stanje: novo, Rear tipper with electric pump & cordless screwdriver pump Manufacturer: Unsinn Model: WEB HK 2715-26-13 Dimensions: 2760 x 1500 x 300 mm (L x W x H) Guodpfxey I Du Uj Ap Eed Permissible total weight: 2,600 kg Unladen weight: approx. 555 kg Payload: approx. 2,005 kg (payload may vary depending on equipment and configuration) Hydraulic unit "Pumpless" incl. socket adapter for convenient and easy tipping using a cordless screwdriver Integrated battery charger with 230V plug Battery and pump unit safely stowed and protected from dirt inside the battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting) Unique, torsion-resistant longitudinal chassis for safe driving characteristics and high stability Fully welded, hot-dip galvanized, closed steel frame profile Continuous, heavy-duty steel floor covering the full vehicle width Maintenance support, securing the tipper body when tilted Reinforced automatic jockey wheel Shunting handle with handy strap reel for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings mounted above and below the platform, each rated to 1,000kg and 360° rotatable Side panels fully foldable and removable Tailboard with steel sheeting, fold-down, including anti-slip protection for loading ramps Robust cam locks on the side panels 4 plug-in steel corner posts Lighting with 13-pin connector and reversing light Incl. vehicle documentation Available options and accessories for this trailer: Whether mesh extension, steel extension, or drop side extension – select your preferred option and customize your build. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, use mesh extensions at the front and rear together with steel or drop side extensions at the sides – no additional effort required. Shock absorbers incl. 100 km/h approval Anti-theft device Drawbar cover Cargo securing net Registration of your new trailer at the road traffic authority

Stanje: rabljeno, lastna masa: 650 kg, skupna masa: 2.000 kg, prva registracija: 08/2012, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.800 mm, Leto izdelave: 2012, The pick-up market for your new or used trailer offers leading brand models ready for immediate collection! - Over 850 new trailers in stock - Over 130 used trailers available at all times - Over 150 vehicle transporters of popular versions with extensive accessories in stock Non-binding sample offer: Used box trailer with sandwich construction and skylight Box with rear wing doors Side panels robust and smooth, suitable for signage Guodpfx Aey D Il Nsp Esd Rear door: double-leaf with bar lock Internal loading dimensions approx. 300x150x180 cm Overall dimensions approx. 420x200 cm, height 240 cm Loading height only approx. 51 cm Lashing points, lashing system, rear support, 100 km/h approval Please note tire age Shelf / motorcycle mount - lightweight ramp included Second owner Valid inspection (HU) until 08/2026 Gross weight 2000 kg, empty weight approx. 650 kg Differential taxation according to § 25 UStG, VAT not deductible Inspection and on-site purchase are expressly encouraged and can be arranged by appointment during our opening hours from Monday to Friday. 04/26 used fh1070

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 209942, lastna masa: 860 kg, največja dovoljena obremenitev: 1.740 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 1.660 mm, višina nakladalnega prostora: 1.920 mm, velikost pnevmatike: 185/65R14, barva: srebrn, Leto izdelave: 2024, Oprema: hladilna enota, Rental Trailer Unsinn UKT 6C 3617-26-14 for Hire! 1 day = €95 2 days = €90 per day 3 days = €85 per day 4 days = €70 per day Prices include VAT. Chassis Torsion-resistant aluminium chassis for excellent tracking stability Jockey Wheel Reinforced automatic jockey wheel, mounted on a separate cross member, with a load capacity of 900 kg for secure parking of the trailer 4 sturdy crank supports (incl. crank handle) mounted on heavy-duty, hot-dip galvanized crossbeams, for up to 6,000 kg static load Body One-piece sandwich panels (i.e., without bonded joints) with a wall thickness of 45 mm for optimal stability and insulation Inner and outer layers made of galvanized and powder-coated steel sheeting for robust use Elegant exterior colour in Silver (RAL 9006), interior colour in White (RAL 9010) Rear frame and edging profiles made from anodised aluminium sections Double-wing rear door with rubber seal and aluminium hinges Lockable cold storage door with two keys and stainless steel door retainer 2 manoeuvring handles mounted on the front wall profile Galvanized scuff rail running around three sides (height: 200 mm) Refrigeration Unit Renowned Arktik 1600 N refrigeration unit with emergency hotline 1,600 W cooling capacity at a cold storage temperature of +6°C and an ambient temperature of 30°C Temperature control range from +2°C to +10°C 230 V 50 Hz mains connection Guedpfstk Hx Dox Ap Esd Evaporator air flow rate: 750 m³/hour Fully encased unit with an attractive front cover made of impact-resistant ABS plastic, mounted at the top of the front side Operates with environmentally friendly CFC-free refrigerant Electronic automatic defrost of the evaporator

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 910 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.300 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm Rear Tipper with PUMPless" Rear tipper by trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 is a single-axle high loader rear tipper. Easy loading thanks to its foldable and removable aluminium side panels. The load can be tipped by hand using the manual hydraulic system. A welded base frame gives this tipping trailer excellent stability. Guodpfoq Rvcqsx Ap Ejd This car trailer features foldable and removable side panels, solid steel floor, PUMPless hydraulic system for use with cordless screwdrivers, jockey wheel, lashing eyes, welded hot-dip galvanized steel chassis, and a robust V-drawbar. Optional accessories available at extra cost: mesh extension, side wall extension, tarpaulin and frame, cover tarp, load securing net, and prop stands.

Stanje: novo, lastna masa: 380 kg, največja dovoljena obremenitev: 920 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.280 mm, višina nakladalnega prostora: 1.530 mm, velikost pnevmatike: 165R13, Unsinn WEB40 plywood box trailer from the renowned German trailer manufacturer. This car trailer features a plywood superstructure, with white, plastic-coated sides and a translucent roof for optimal daylight. Gsdpfx Ajq Nzr Djp Ejud Standard equipment includes a single-wing rear door with lockable rotary bar lock, jockey wheel, translucent roof section, straight drawbar, and robust, white, plastic-coated walls. Optional accessories for this car trailer include loading ramps, lashing rails, rear support stands, lashing rings, toolbox, anti-theft devices, lashing straps, and much more.

Stanje: novo, lastna masa: 560 kg, največja dovoljena obremenitev: 2.040 kg, skupna masa: 2.600 kg, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600 kg 276x150x30 cm Three-way tipper with PUMPless" Guedoqv Ec Hjpfx Ap Eod Rear tipper from the manufacturer Unsinn. Made in Germany! The high loader as rear tipper WEB-HK2715-26-13 can be easily loaded from the side or rear either by forklift or manually thanks to the folding and removable aluminium side panels. The load is tipped out again using a hand-operated hydraulic system. A welded subframe ensures the tipping trailer is extremely stable. The car trailer is equipped with foldable and removable side panels, solid steel floor, PUMPless-hydraulics for cordless screwdrivers, automatic jockey wheel, lashing rings, welded hot-dip galvanized frame, and a very robust V-drawbar. At an additional cost, trailer accessories such as leaf grille extension, side wall extension, tarpaulin and frame, cover tarpaulin, mesh, and support legs are also available.

Stanje: novo, lastna masa: 630 kg, največja dovoljena obremenitev: 1.970 kg, skupna masa: 2.600 kg, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 165r13, Product information: "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Mesh Side Three-Way Tipper" Three-way tipper with mesh sides from trailer manufacturer UNSINN, model WEB-DK3017-26-13-E. Made in Germany! This high-loader three-way tipper is equipped with electric-hydraulic tipping. The foldable and removable side panels make loading the trailer from the side or rear easy – whether by forklift, wheel loader or by hand. A welded, immersion hot-dip galvanized steel frame provides outstanding strength and durability for the tipper. Standard equipment includes: mesh side extensions, foldable and removable side panels, solid steel floor, electro-hydraulics, automatic jockey wheel, lashing rings, welded hot-dip galvanized frame, ramp compartment, and a robust V-drawbar. Optional accessories available (at extra cost): side wall extensions, tarpaulin and frame, flat cover, net, storage box, loading ramps and support stands. ----- We also offer: · Financing · Leasing (for commercial customers only) · Consulting · Nationwide delivery within Germany (excluding islands) · Accessories · Trailer rental · Spare parts · Registration service for DH – HB – DEL · Servicing · Repairs · TÜV inspection for car trailers Car Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday – Friday 8.00 am – 5.00 pm Gusdpfx Apeg Un Dzs Ejd

Stanje: novo, lastna masa: 230 kg, največja dovoljena obremenitev: 520 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 150 mm, velikost pnevmatike: 175/70R13, Single-axle unbraked lowering trailer Unsinn AS826-13-1550. The platform of this car trailer can be tilted, making it easy to load motorcycles, quads, ATVs, sweepers, and similar vehicles. This tiltable car trailer is equipped with a perforated railing, jockey wheel, lashing eyes, and tubular drawbar. Gusdpfxsq Nm A No Ap Esd Available accessories include a motorcycle stand rail, motorcycle chock, tarpaulin and frame, side wall extensions, additional lashing eyes, motorcycle tie-down strap, toolbox, anti-theft device, and lashing straps.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 440 kg, največja dovoljena obremenitev: 1.360 kg, skupna masa: 1.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 150 mm, skupna dolžina: 4.640 mm, skupna širina: 2.370 mm, skupna višina: 950 mm, stanje pnevmatik: 100 odstotek, barva: črn, Leto izdelave: 2026, Oprema: dvižna zadnja plošča, Oplata 195/50 R13C Višina nakladanja cca 460 mm Okvir • Tristranska nadgradnja iz stabilnega, pocinkanega in prašno barvanega jeklenega profila v črno-sivi barvi (RAL 7021) • Z vlečno cevno ojesnico • Izvedba za 100 km/h Opornik • Ojačano avtomatsko oporno kolo z nosilnostjo 500 kg za varno parkiranje prikolice • Ročaj za lažje manevriranje Nadgradnja • Prekucna dvižna klančina z zložljivim nosilcem registrske tablice za uporabo celotne širine tovornega prostora (za vstop) • Stabilni in zložljivi plastični blatniki Privez tovora • 8 zložljivih pritrdilnih ušes, nameščenih v stranskem profilu, za enostavno in udobno pritrjevanje tovora Guedpfeyv H Rnex Ap Ejd • Pritrdilna ušesa s posamezno nosilnostjo do 400 daN (kg) • 1 pritrdilno uho v prednjem profilu in ena pritrdilna točka (600 daN) na

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2012, Unsinn KK 20-30 Gusdpoyc U U Hsfx Ap Eed Leto izdelave: 2012 2 osi Zaprta prikolica : 2.600 kg Vlečna kljuka za osebni avtomobil

Stanje: novo, številka stroja/vozila: 4367Klappe, lastna masa: 515 kg, največja dovoljena obremenitev: 1.485 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.571 mm, višina nakladalnega prostora: 1.940 mm, velikost pnevmatike: 175/70 r13, barva: bela, Leto izdelave: 2022, Oprema: dvižna zadnja plošča, Special price, year of manufacture 2022 Manufacturer: ATB Fahrzeugtechnik GmbH Lightweight box trailer with ramp !!! 100 km/h version with 2 sliding supports, mounted at the rear right and left / sales flap WxH: 2500x1440 mm!!! Swiveling LED interior lighting with motion sensor, including batteries Model: Box trailer type ULK2030-13-1570 with interior lighting and lashing rail Permissible gross weight: 2000 kg Payload: 1485 kg Dimensions: External dimensions L/W/H: 4410x2070x2510 mm Number of axles: 2 Loading height (trailer): approx. 540 mm Tyres: Tyres: 175/70 R13 Chassis: · Unique, torsion-free longitudinal girder chassis for safe driving characteristics Support wheel: · Reinforced automatic support wheel for safe parking of the loaded trailer, load capacity 500 kg (braked version) Bodywork: · Lightweight panels with GRP surface, white RAL 9016 · Transparent light roof for optimal visibility during loading -Ramp Size: 3660x1750x1940 mm With cross-mounted locking bar and anti-slip plastic floor Maximum total load: 500 kg -Sales flap with 2 gas struts, wind support, and external locking bar · Rear frame and edging profiles made of special anodized aluminum profiles Godpfolmmqlsx Ap Eoud · Loading platform made of multi-glued screen-printed board, 18 mm, anti-slip and waterproof Load securing: · Lashing system with 6 adjustable tie-down rings for optimum load securing · Lashing rail on the sides, height 900 mm Electrics: · Lighting with 13-pin plug and reversing lights · LED interior lighting

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 835 kg, največja dovoljena obremenitev: 2.165 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, velikost pnevmatike: 185R14C, Leto izdelave: 2025, Three-way tipper UDK 3017-30-14 Spinlock®, 350 mm side walls with angle lever locks, tailboard with steel cladding, electric hydraulics with emergency pump Pumpless, ramp compartment incl. folding license plate holder, maintenance support Internal body dimensions: 3,060 × 1,750 × 350 mm Loading height: 750 mm Payload: 2,160 kg Tyres: 185 R14C 8PR Chassis Torsion-resistant longitudinal beam chassis (longitudinal beams run continuously from the overrun device to the lighting bracket) for increased tracking stability Closed, fully welded and hot-dip galvanized steel chassis profile for optimum stability Integrated ramp compartment with tensioning system and folding license plate holder for safe and elegant stowage of ramps beneath the loading platform With maintenance support to secure the tilted body during servicing work Jockey wheel Reinforced automatic jockey wheel mounted on a separate cross member with a load capacity of 500 kg, ensuring safe parking of the trailer Maneuvering handle with practical strap reel for easy handling Loading platform & body Robust steel floor spanning the full width of the vehicle Body with maximum number of cross members for particularly high point loads Load securing Patented Spinlock load securing system for increased flexibility and efficiency, DEKRA certified 10 lashing pins recessed into the steel floor, distributed symmetrically Gujdpfx Apoxc Eh Ae Eod Lashing pins above and below the loading platform, each rated up to 1,500 daN (kg) and rotatable 360° Pot magnet with key ring to pull out the lashing pins when the side wall is open Side walls Anodized, fully folding and removable aluminium side walls Galvanized angle lever locks with spring safety Tailboard with steel cladding, foldable, incl. anti-slip guard for loading ramps 4 plug-in steel corner posts for high loads and easy loading, and for attaching accessories Hydraulics Protected, mounted electric hydraulics with battery and high-performance charger for long service life Emergency pump Pumpless incl. matching socket wrench adapter for convenient and easy tilting with a cordless screwdriver in case of low battery