Humbaur Ht Prikolice nakup rabljenega (553)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.000 kg, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Please arrange an appointment for purchase and pickup and have the advertisement number or a printout of this advertisement ready!!! Non-binding example of a used Multi Transporter motorcycle/bicycle trailer Low drive-over loading edge 100 kg braked, 100 km/h Offered and sold as is! Viewing by appointment only! Lashing points inside the loading area First registration 08/2024 Inspection valid until 08/26 1,000 kg total weight Loading area approx. 210x136 cm with base plate and various mounts and rails Total dimensions 350x180 cm (LxW) Well-maintained, almost as-new condition – tires good for 100 km/h, check tire age Gbsdpfx Afoxcklgjzog Sale price VAT not deductible Sale only on site during our business hours Available by appointment! Business hours: Mon - Fri 08:00 to 12:30 and 14:00 to 18:00 Images and description of this advertisement are copyright protected – logos are trademarked 11/24 used Humbaur Mot ccsk4002

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, Vehicle Data – Humbaur Central Axle Trailer O4 (HTK 18524) General Information • Manufacturer: Humbaur GmbH, Gersthofen • Model: HTK 18524 • Commercial Designation: Central Axle Trailer O4 • Variant: 5FB • Version: GC • Body Code: DC10 (DC Tipper) • Vehicle Identification Number (VIN): WHD185524R1206752 • EC Type Approval: e12007/460871*10 • First Registration: 22.06.2023 ⸻ Technical Specifications Axles and Wheels • Number of Axles: 2 Main Dimensions • Wheelbase: 5,530 mm • Axle Spacing: • Axle 1–2: 1,320 mm Gbjdpfx Ajw Stg Hofzsg • Length: 7,480 mm • Width: 2,550 mm • Height: 1,800 mm • Distance from Center of Coupling to the Rearmost Point of the Vehicle: 4,220 mm • Loading Platform Length: 5,530 mm • Rear Overhang: 1,890 mm • Overall Vehicle Length: 7,420 mm Weights • 13 – Kerb Weight: 4,710 kg • 13.2 – Axle Load Distribution: • Axle 1: 2,350 kg • Axle 2: 2,050 kg • 14 – Actual Vehicle Weight: 4,710 kg • 15 – Technically Permissible Maximum Weights: • Total Weight (laden): 18,500 kg • 16.2 – Technically Permissible Maximum Weight per Axle: • Axle 1: 8,500 kg • Axle 2: 8,500 kg • 16.3 – Technically Permissible Maximum Weight per Axle Group: • 2-Axle Group: 17,000 kg • 17.1 – Maximum Permitted Gross Weight for Registration/Operation: 18,000 kg • 17.2 – Maximum Permitted Weight per Axle for Registration/Operation: • Axle 1: 9,000 kg • Axle 2: 9,000 kg • 17.3 – Maximum Permitted Weight per Axle Group for Registration/Operation: • 2-Axle Group: 18,000 kg • 19 – Technically Permissible Drawbar Load at Coupling Point: 1,000 kg - - - All information subject to change without notice - - - Images may differ - - -

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Gsdjvtf Nfepfx Afzjbg Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tip angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipper bed, hot-dip galvanized - Tipper bed made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear tailgate with pendulum function - 6 lashing rings mounted on the bed floor, each with a lashing force of 800 kg, Dekra-certified - Support wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Black side panels - Parabolic suspension Price includes registration certificate (part II) and COC documentation We have a large range of trailers by the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate for carriage. We service and repair trailers of all manufacturers. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Reversing automatic, rubber suspension axle, independent suspension, tiltable platform, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper bed made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium removable side panels, pendulum-type rear tailgate, 6 lashing rings (800 kg each, Dekra-certified), preparation for aluminium ramps, black side panels, parabolic suspension.

Stanje: novo, največja dovoljena obremenitev: 37.460 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.180 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, HUMBAUR 3-axle low-loader trailer with wheel recesses and cranked loading platform, Model HTS30K – Wheel Well Version --- INCLUDES lift axle & trailing steering axle with SAF air suspension INCLUDES aluminium side boards and toolbox on the gooseneck INCLUDES 3-meter extension package INCLUDES excavator trough INCLUDES large hydraulic package (hydraulic ramp lifters, hydraulic side shift, & hydraulic rear support) Specification: V41 * Perm. gross weight: 48,000 kg * Payload approx. 37,460 kg * Chassis frame and ramps hot-dip galvanized * Visible parts painted in RAL colour * SAF air suspension unit incl. raise/lower function * Lift axle with starting aid and self-steering rear axle * EBS Electronic Braking System * WABCO Smart Board for axle load display * Excavator arm trough approx. 3,000 mm in length * Loading height approx. 890 mm * Fifth wheel height approx. 1,230 mm * Tyres: 235/75R17.5 – 12 units * Low-bed length approx. 8,680 mm incl. incline * Gooseneck platform length approx. 3,500 mm incl. incline * 2" kingpin, adjustable by 340 mm for 2+3 axle tractor units * Wheel recess depth front 390 mm and rear 320 mm for various wheelbase sizes * Removable wheel recess inserts with hardwood covers * Gooseneck with 400 mm front wall * Aluminium side boards, 400 mm high, foldable + lockable storage box * 3 pairs of 6-ton recessed lashing rings in the raised deck * 3 pairs of 3-ton lashing points on the outer frame of the raised deck * 5 pairs of 10-ton recessed lashing rings in the low bed * 5 pairs of 6-ton lashing eyes bolted to the outer frame * 3 pairs of stake pockets in the outer frame (raised deck) * 5 pairs of stake pockets in the outer frame (low bed) * 3 pairs of 6-ton lashing eyes in the excavator arm trough * 3-metre widening package with folding outriggers, timber planks * Steel toolbox under the loading platform, lockable, with side compartment for timber planks storage * Warning package including lights * Rotating beacon at the rear * 2x LED reversing lights at the rear * 1-piece ramps approx. 3150 x 750 mm – approach angle approx. 10° Gedpfx Afjkn N Rpszjbg * Softwood flooring on low-loader and gooseneck platforms * Hydraulic ramp lifters * Hydraulic side shift * Hydraulic rear support * COC documents * 40,000 kg gross weight only with special permit acc. to §70 * 1 pair of load guiding rails, galvanized * Gallows-type hanger for supply lines * Anti-slip strips on the loading ramp * Brake couplings: red/yellow * Electrics: triple socket with 2x 7-pin (1 x ISO 1185 / 1x ISO 3731, 24V-N/24V-S) and 15-pin ISO 12098 * ECE warning panel at the rear *Stock vehicle – available immediately *Subject to prior sale *Ex works price

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2022, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, Leto izdelave: 2022, Oprema: ABS, = Dodatne možnosti in oprema = - EBS = Opombe = Dodatne informacije : Znamka: HUMBAUR Model: HTS30 SCHRAG Zgradba: nizkopodnožni polpriklopnik ( platforma D=9010 mm / Š=2550 mm / V=899 mm ) Letnik: 07.2022 Vzmetenje: zračno Gbjdpfx Asxrmcysfzsg Zavore: bobnaste Dimenzije: D/Š: 13950 mm / 2550 mm Mase: bruto/prazno: 48000 kg / 10500 kg SAF OSI / KRMILJENA ZADNJA OS Modelno leto: 2022 = Več informacij = Velikost pnevmatik: 235/75R17.5 Vzmetenje: zračno vzmetenje Prednja os: dvižna os Zadnja os: krmiljena Lastna masa: 10.500 kg Nosilnost: 37.500 kg Dovoljena skupna masa: 48.000 kg Za več informacij kontaktirajte Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche ali Deniss Urmaker.

Stanje: rabljeno, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 3.626 mm, skupna širina: 2.022 mm, skupna višina: 1.240 mm, Errors and prior sale excepted! Internal Number: 1451. GW220985927 ---- For equipment details and condition, please refer to the images. ---- The vehicle is offered in as-is condition! Gedpfxspxmg Nj Afzebg Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing available with no down payment required! Do you have any questions? We are happy to advise you!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, ++Availability upon request++ ++Delivery possible, freight charges upon request++ HTK 754020 Weights Technical gross vehicle weight: 7,500 kg Drawbar load: 500 kg Unladen weight: approx. 2,250 kg Payload with standard equipment: approx. 5,250 kg Dimensions Platform dimensions (L x W x H): approx. 4,000 x 2,030 x 400 mm Side wall height: approx. 400 mm Loading height (unladen): approx. 920 mm Drawbar length (free): approx. 1,900 mm Coupling height (unladen): approx. 560–840 mm Overall dimensions (L x W x H): approx. 6,070 x 2,200 x 1,450 mm Tyres: 4 x 215/75 R 17.5 Tip angle lateral/rear: 45° / 48° Oil requirement: 10 L V-value mechanical: 14.8 V-value pneumatic: 11.1 2 pairs of recessed folding lashing eyes per corner, 3,000 kg each 3 pairs of recessed lashing brackets along loading bed, 2,000 kg each -- Axles Axle units from renowned manufacturers; Suspension Maintenance-free parabolic suspension with load equalisation; Tyres Tyres according to manufacturer’s choice; Brake system ABS braking system according to ECE directive with ALB function; ABS connector ISO 7638; Spindle parking brake; 2x polarity safe coupling heads red/yellow ISO 1728; Electrics 24 V lighting system with multi-chamber rear lights and LED side marker lights; 15-pin plug connector for lights; Towing device Drawbar with 40 mm DIN screw towing eye, galvanised, Infinitely adjustable via crank; Chassis Robust, welded, hot-dip galvanised frame; Lockable recess for 2 optional loading ramps; Equipment Rigid side underrun protection installed from the start of the bed to the 1st axle; Mudguards with splash guards on front and rear axles; 2 wheel chocks with holder; Side and rear contour markings; Space for single-line license plate; Gbsdpfx Afowk Efmozjg Support Heavy-duty automatic jockey wheel; Hydraulics Three-way hydraulic tipper controlled via towing vehicle (max. 200 bar); Five-stage nitrided cylinder with stroke limitation and safety cables; Hydraulic quick coupling SVK BG3 as single-circuit connection; Platform Platform floor made of 4 mm steel plate; Reinforced, hot-dip galvanised platform frame; 4 ball cup bearings with 2 polarity safe tilt bearing bolts; Side Walls Laser-welded high-quality steel side walls, 400 mm high; Side walls foldable and removable; Rear flap foldable, removable, and swinging with central locking; Front wall made of steel, removable; Side walls primed and painted according to RAL (colour of your choice); +++ Without loading ramps => Optional at a surcharge of €1,590 net plus VAT 1 pair aluminium loading ramps incl. support feet at rear Length x width approx. 3,050 x 400 mm Load capacity approx. 4,390 kg/pair for a wheelbase of 1,500 mm Weight/piece: approx. 31 kg Ramp angle: approx. 16° +++ +++ Side walls, loading bed, and chassis frame hot-dip galvanised by immersion bath (side walls hot-dip galvanised / not painted!) +++ -- All information subject to change -- Illustrations may differ --

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder Godowlabxjpfx Afzjbg - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, Vehicle Description: • Manufacturer: Humbaur GmbH • Model: HTK-Garant TA G VD • Variant: MF4S • Version: 25 • Commercial Designation: HTK 3500.41 2016 • Vehicle Class: O2 ⸻ Technical Data: • Number of Axles / Wheels: 2 axles / 4 wheels • Axle Distance (1–2): 3,076 mm • Wheelbase: 3,826 mm • Length: 5,482 mm • Width: 2,272 mm • Height: 1,240 mm • Loading Length: 4,102 mm • Rear Overhang: 1,638 mm • Coupling to Rear Distance: 5,445 mm ⸻ Weights: • Unladen Weight (ready to drive): 950 kg • Actual Vehicle Weight: 1,185 kg • Permissible Total Weight (laden): 3,500 kg • Permissible Axle Load per Axle: 1,750 kg (per axle) • Permissible Axle Group: 3,500 kg • Vertical Load at Coupling Point: 150 kg ⸻ Tyres & Wheels: • Tyre Combination (e.g.): 195/50 R13C 104N on rim 6Jx13 ET30 (additional permitted combinations: see remarks under item 52) ⸻ Brake System & Bodywork: • Brake Connection: Mechanical • Bodywork Code: DC10 ⸻ Gsdpfswyw Hzex Afzobg Towing Device: • Approval Mark: E1 55R-011594 • Characteristics: • D-Value: 31 kN • S-Value (Vertical Load): 325 kg ⸻ Maximum Speed: • 100 km/h ⸻ Note on Classification of the Trailer: As this is an HTK (Humbaur Tandem Tipper) with high payload and a tipping loading platform, this trailer is a: Three-way tipper - - - All specifications without guarantee - - - Illustrations may differ - - -

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder Gsdpfx Afevtf I Uozebg - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging Gsdsflw Sbspfx Afzjbg - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3500 kg Payload: 2512 kg Unladen Weight: 988 kg Body Dimensions: 3140 x 1750 x 350 mm Tyres: 195 50 R13C Loading Height: 740 mm Load Platform hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, lateral 50° With 600 mm high steel side extension panels, pendulum-mounted on all four sides - V-drawbar, hot-dip galvanized immersion - Chassis and tipper frame hot-dip galvanized immersion - Tipper body made from steel, single-piece construction - 4-stage hard-chromed tipping cylinder - Hand pump, electric pump from 3000 kg GVW up, combined with hand pump - 13-pin connector and reversing lights - Removable aluminium side walls, 350 mm high, completely detachable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra certified - Support wheel - Plank compartment pre-installed for easy retrofitting with aluminium planks Price includes vehicle documents (Registration Certificate Part II and COC papers) Gsdpfx Afjfbiavszjbg We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reversing automatic, rubber-sprung axle, independent suspension, tiltable load platform, support wheel, clearance lights, chassis and tipper frame hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipper body single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg GVW up electric pump with hand pump, 13-pin plug and reversing lights, removable aluminium sidewalls 350 mm high, rear tailgate pendulum-mounted, 6 lashing rings mounted on the platform floor, tensile strength 800 kg per ring, Dekra certified, plank compartment as preparation for easy retrofitting with aluminium planks.

Stanje: novo, lastna masa: 367 kg, največja dovoljena obremenitev: 1.600 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.030 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 9 m³, barva: siv, gradbena višina: 2.550 mm, delovna širina: 2.040 mm, Manufacturer: Humbaur Model: Low Loader Alu HA 203015 Permissible total weight: 2,000 kg Payload: 1,600 kg Unladen weight: 400 kg Internal dimensions: 3,030 x 1,500 x 350 mm Equipped with light grey tarpaulin and 2,000 mm high hoop frame (internal clearance including Eco nose, front tapered) Tyres: 13-inch Loading height: 525 mm with fold-down front panel Features: - V-drawbar, fully hot-dip galvanized by immersion - 13-pin plug - 15 mm thick floor panel Gsdpfxsd T Stus Afzsbg - Side walls made from anodised aluminium - Drop sides with flush-fit locks - 6 lashing rings integrated into side walls, load capacity 400 kg per lashing ring, Dekra approved - Humbaur multifunctional lighting integrated into underrun protection Price includes vehicle documents (Registration Certificate Part II and Certificate of Conformity) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide a complimentary transit license plate. We repair trailers of all makes. Additional accessories available on request. Technical specifications, prices, and errors subject to change. No liability for mistakes or typographical errors. Features: - Automatic reversing system - Rubber suspension axle - Independent wheel suspension - High tarpaulin - Jockey wheel - Marker lights - V-drawbar, fully hot-dip galvanized by immersion - Braked - Incl. warranty - 13-pin plug - 15 mm thick floor panel - Side panels made from double-walled anodised aluminium profile - Drop sides with flush-fit locks - 6 lashing rings integrated into side walls, load capacity 400 kg per lashing ring, Dekra approved

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° Gbedpsrazlkefx Afzog With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; electric pump with hand pump from 3,000 kg gross weight - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump Gbedpfx Aferi Tb Aszjg - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted Gbsdpfsktm Suox Afzjg - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Gedpfx Afsri Tawezjbg On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Gross Vehicle Weight: 3,500 kg Axles: Tridem Payload: 2,360 kg Unladen Weight: 1,140 kg Body Dimension: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45°, side 45° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made from single-piece steel - 4-stage hard-chrome-plated tipping cylinder - Hand pump, from 3,000 kg gross weight with additional electric pump - 13-pin plug and reverse lights - Drop sides made of aluminium, 350 mm high, fully removable - Rear flap is swing-type - Eight lashing rings fitted on the platform, each with 800 kg load capacity, Dekra-tested - Jockey wheel - Ramp tray prepped for easy retrofit of aluminium ramps Price includes vehicle registration document (part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Gjdpfjd T Svtox Afzjbg On request we can provide a free transfer number plate. We repair trailers from all manufacturers. Additional accessories on request. Subject to technical modifications, price changes, and errors. No liability for typing or printing errors. Reverse automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar, hot-dip galvanized, tipper platform made from single-piece steel, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm, fully removable, swing-type rear flap, 8 lashing rings on the platform, 800 kg per lashing ring, Dekra tested, ramp tray prepped for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 1.335 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.220 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2000.27 Permissible Total Weight: 2,000 kg Payload: 1,335 kg Unladen Weight: 665 kg Body Dimensions: 2,670 x 1,500 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load Area hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg total weight, electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made from powder-coated, galvanized sheet steel, fully removable - Rear flap with swing function - 6 tie-down rings mounted on bed floor, load capacity 800 kg per ring, DEKRA certified - Jockey wheel - Channel as preparation for aluminium ramps for easy retrofitting Price includes vehicle registration document (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Gedpfxegi Sr Se Afzjbg Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Reverse-automatic, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, galvanized steel sheet, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized by immersion, tipping bridge made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, powder-coated, fully removable drop sides, rear flap with swing function, 6 tie-down rings mounted on the bed floor, load capacity 800 kg per ring, DEKRA certified, ramp channel prepared for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.27 Gross Vehicle Weight: 2700 kg Payload: 2025 kg Unladen Weight: 675 kg Internal Dimensions: 2670 x 1500 x 350 mm Tyres: 13 inch Loading Height: 725 mm Load bed hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° Gedpfjri Tbxox Afzobg - V-drawbar, hot-dip galvanized - Chassis and tipping frame, hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; for permissible total weight from 3000 kg electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made of powder-coated, galvanized steel plate, completely removable - Rear tailgate with swing function - 6 lashing rings mounted on platform floor, rated for 800 kg per ring, Dekra certified - Jockey wheel - Boarding plank compartment pre-installed for retrofitting aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary registration plate from us. We repair trailers from all manufacturers. Additional accessories upon request. Subject to technical modifications, price changes, and errors. No liability for errors or misprints. Features: Automatic reverse, rubber suspension axle, independent wheel suspension, tilting load area, jockey wheel, marker lights, galvanized steel plate, braked, includes warranty, hot-dip galvanized V-drawbar, hot-dip galvanized chassis and tipping frame, one-piece steel tipping platform, 4-stage hard-chromed tipping cylinder, hand pump (from 3000 kg permissible total weight: electric pump with hand pump), 13-pin connector and reversing lights, powder-coated drop sides, fully removable, rear tailgate with swing function, 6 lashing rings mounted on floor rated at 800 kg each, Dekra certified, boarding plank compartment prepared for easy retrofitting of aluminium boarding planks.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.251 mm, delovna širina: 2.022 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.37 Permissible Gross Weight: 3000 kg Payload: 2100 kg Unladen Weight: 900 kg Body Dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable via manual pump and electric pump Tipping angle rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Manual pump; from 3000 kg gross weight onwards: electric pump with manual backup - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear tailgate can be used as a swinging gate - 8 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra tested - Jockey wheel - Preparation for aluminum ramps (ramp compartment) for easy retrofitting Price includes registration documents (Certificate of Title Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Gbsdpel Dqldofx Afzjg Features: auto-reverse brakes, rubber suspension axle, independent suspension, tiltable loading platform, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3000 kg gross weight electric pump with manual backup, 13-pin plug and reversing lights, aluminum side walls 350 mm high, fully removable, rear swinging tailgate, 8 lashing rings mounted to the platform with 800 kg tensile load per ring, Dekra approved, ramp compartment as preparation for retrofitting aluminum ramps.

Stanje: novo, lastna masa: 850 kg, največja dovoljena obremenitev: 1.840 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Side Tipper HTK Alu 2700.31 Permissible total weight: 2700 kg Payload: 1850 kg Gbodpfxervgtvo Afzsg Unladen weight: 850 kg Body dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 745 mm Loading platform hydraulically tiltable via hand pump Tipping angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized (immersion bath) - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight with additional electric pump - 13-pin plug and reversing light - Sidewalls made of powder-coated, galvanized steel, completely removable - Rear flap with swinging function - 6 lashing rings mounted on platform floor, each with 800 kg lashing capacity, Dekra tested - Support wheel - Slot for aluminium ramps pre-installed for easy retrofitting Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit (transfer) licence plate. We repair trailers of all makes. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber-sprung axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sidewalls, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump–from 3000 kg permissible total weight with electric pump, 13-pin plug and reversing light, sidewalls powder-coated and fully removable, swinging rear flap, 6 lashing rings with 800 kg capacity each (Dekra certified), slot for aluminium ramps pre-installed for easy retrofitting.

Stanje: novo, lastna masa: 870 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load platform hydraulically tip-able with hand pump and electric pump Tipping angle rear 42°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made from one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight also with electric pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear panel pendulum-type - 6 lashing rings mounted on bed, 800 kg tensile force each, Dekra certified Gsdpsrq Ew Tjfx Afzjbg - Jockey wheel - Stake pocket prepared for retrofitting aluminium ramps Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we offer a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Features: auto-reverse braking, rubber suspension axle, independent wheel suspension, tipper platform, jockey wheel, marker lights, hot-dip galvanized chassis and tipper body, braked, includes warranty, V-drawbar hot-dip galvanized, one-piece steel tipper body, 4-stage hard-chromed tipper cylinder, hand pump, electric pump from 3,000 kg permissible gross weight, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, pendulum-type rear panel, 6 lashing rings on bed (800 kg tensile force each, Dekra certified), ramp pocket for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.210 mm, delovna širina: 2.003 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 3500.37 Permissible gross weight: 3,500 kg Payload: 2,500 kg Unladen weight: 1,000 kg Load bed dimensions: 3,630 x 1,850 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tipppable with manual pump and electric pump Tipping angle rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platforms, fully hot-dip galvanized - One-piece steel tipping platform - 4-stage hard chrome tipping cylinder - Manual pump, and from 3,000 kg permissible gross weight onwards, electric pump with manual pump - 13-pin plug and reversing lights - Aluminium side boards, 350 mm high, fully removable - Swinging rear gate - 8 lashing rings on the bed, pull force 800 kg per ring, Dekra-certified - Support wheel - Plank compartment prepared for aluminium planks for easy retrofitting Price includes vehicle registration certificate (Certificate of Registration Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary license plate. We repair trailers of all makes. Further accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Features: automatic reverse, rubber suspension axle, independent suspension, tilting load platform, support wheel, position lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, manual pump, from 3,000 kg permissible gross weight electric pump with manual pump, 13-pin plug and reversing lights, aluminium sidewalls 350 mm high, fully removable, swing rear gate, 8 lashing rings on the load bed, pulling force 800 kg per ring, Dekra certified, plank compartment prepped for easy retrofitting of aluminium planks. Gbedsrq Exbopfx Afzsg

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel Gbedorazk Uopfx Afzog - Channel prepared for easy retrofit of aluminium loading ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.