Hapert Azure Prikolice nakup rabljenega (171)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.052 kg, največja dovoljena obremenitev: 2.446 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.050 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 300 mm, vzmetenje: parabolično listje (vzmet), največja hitrost: 100 km/h, *NEW VEHICLE* Hapert Azure H-2 Permissible gross weight: 3500 kg Unladen weight: 1052 kg Payload: 2446 kg Internal bed dimensions: 6050 x 2400 x 300 mm Overall dimensions: 7680 x 2460 x 1065 mm Loading height: 760 mm 2 axles 13-inch tyres Double-walled anodised aluminium drop sides All side panels fold down and can be removed Removable steel corner posts Central post on the side with split drop sides Wooden floor (Finnish quality) with phenolic coating Very robust welded steel chassis Chassis fully hot-dip galvanized by immersion Numerous cross members for high point load capacity Additional fully welded longitudinal beams Djdpfoxupu Rox Af Uskg All cross and longitudinal beams are floor-mounted Low loading height due to low chassis 12 recessed lashing rings in the side rail TÜV certified to 1000DaN / kg Lashing hooks on outer frame Automatic reversing system BPW overrun brake and parking brake Heavy-duty eccentric locks Very stable, bolted and reinforced V-drawbar 13-pin connector Large, heavy-duty safety lighting Integrated rear fog light Rear frame lighting recessed Automatic jockey wheel, centre mounted Parabolic suspension rated for 100 km/h 2 x rear support stands installed Channel for loading ramps with ramps included Trade-in: We are happy to take your trailer in part exchange. Please contact us or send us photos and details of your vehicle. Delivery: On request, your trailer can be delivered to you within one week after advance payment. The cost is €1.20 per km (distance from Bielefeld to your destination), VAT included. We also offer the following services: -Service -Workshop -TÜV (roadworthiness certification) -Tyres and wheels -Tarpaulins and frames -Custom fabrications in our metal workshop -Rental Around 400 trailers always in stock! We look forward to your visit. Office, workshop, TÜV, spare parts, rental, and showroom Senner Hellweg 187

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: drugo, gradbena višina: 1.020 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Permissible total weight: 3,500 kg Payload: 2,600 kg Tare weight: 900 kg Body dimensions: 3,350 x 1,800 x 300 mm Tyres: 195/50 R13C Loading height: 690 mm With electro-hydraulics and manual emergency pump Incl. ramp package: 2 integrated aluminium loading ramps, 2 crank supports 3-way tipper features: - Fully welded and hot-dip galvanised chassis - Low profile chassis with 195/50 R13 tyres - Robust hydraulic cylinder with electrically operated pump - Heavy-duty foldable jockey wheel - Galvanised steel sheet on multiplex floor panel - TÜV-approved load securing system - Specially designed sideboard hinges for easy installation of load nets - 4 removable corner stanchions - Aluminium side walls, 30 cm high, with robust integrated locks Dksdpfxetmfh Ae Af Ujg Price includes vehicle documents (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer license plates. We service trailers of all makes. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for misprints or errors. Equipment overview: Hydraulic cylinder with electrically operated pump, reversing automatic system, rubber suspension axle, independent wheel suspension, loading ramp, tiltable loading platform, heavy-duty foldable jockey wheel, clearance lights, galvanised steel sheet on multiplex floor panel, overrun brake, incl. warranty, fully welded and hot-dip galvanised chassis, low profile chassis with 195/50 R13 tyres, TÜV-approved load securing system, specially designed sideboard hinges for easy installation of load nets, 4 removable corner stanchions, aluminium side walls, 30 cm high, with robust integrated locks.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Errors and prior sale excepted! Internal number: 1448. EQUIPMENT * Flatbed trailer * 3 axles * Jockey wheel * AL-KO coupling * Side planks all around ... and much more. ----The vehicle is offered in unrefurbished condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. Dkodpfx Aovwh U Ssf Ujg We are happy to take your vehicle in trade-in. Financing / leasing possible even without down payment! Do you have further questions? We are happy to advise you!

Stanje: novo, številka stroja/vozila: Hapert Indigo HF-2 4,05x2,01m 3000kg +abgeschrägtes Heck, lastna masa: 696 kg, največja dovoljena obremenitev: 2.304 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 80 mm, Side walls, railing, and more - 8 cm high Combi-Protect railing - heavy-duty, adjustable winch with winch bracket Drive-On Package - rail channel integrated into the frame behind the license plate - two reinforced aluminium loading ramps, 2.50 m long with anti-slip feature Dsdpfx Afei A D S Ds Uokg Chassis and Frame - chassis fully welded and hot-dip galvanized - low loading platform - tow ball coupling with safety indicator - height-adjustable Hapert automatic jockey wheel with hardened running surface - U-profile at the rear for easier placement of loading ramps Loading Area and Floor - rear end beveled approx. 1.30 m - drive-on angle 11° - anti-slip and waterproof phenolic plywood floor - 15 mm thick - Finnish birch plywood, 11-ply, water-resistant, bonded under pressure Lighting Equipment - modern multifunctional lighting - with reversing light - with rear fog light - with two LED front position lights - 13-pin connector Wheels and Axles - robust rubber suspension axle - with automatic reverse system - maintenance-free compact wheel bearings - impact-resistant plastic mudguards - fitted with splash guards - wheel chocks with holders Lashing and Securing Options - TÜV-certified load securing system from HAPERT - 14 recessed lashing brackets integrated in the frame according to DIN standard, each rated to 1000 daN (kg) per eyelet Documents and Freight Costs - freight costs to us already included - including vehicle registration certificate (registration certificate part 2) - including COC document (EC certificate of conformity) - no additional unwanted costs - reduction of gross vehicle weight possible at extra cost (TÜV fee only) Further offers and information can be found on our homepage. I am not allowed to provide a direct link, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Subject to errors, changes, and prior sale.

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.800 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 8,1 m³, barva: bela, gradbena višina: 2.390 mm, delovna širina: 2.000 mm, Manufacturer: Hapert Model: Low-loader Box Trailer Sapphire L-2 Gross Vehicle Weight (GVW): 3,500 kg Payload: 2,800 kg Unladen Weight: 700 kg Box Dimensions: 3,000 x 1,500 x 1,800 mm Tyres: 175 R14C Loading Height: 530 mm with 2 rear doors - 15 mm multiplex walls with plastic coating. - 2 rear doors. - 2 front-mounted handles make manoeuvring the trailer easier. - Hinges, lock(s) and mounting hardware made of stainless steel. - 15 mm multiplex wooden floor with anti-slip surface. - TÜV-certified load securing system from Hapert: tie-down loops integrated in the side rails. - Bolted V-drawbar. - Fully welded and hot-dip galvanized chassis, suitable for max. 3,500 kg GVW. - Robust foldable jockey wheel. Price includes V5C vehicle registration certificate (Part II registration and COC documents). We have a large range of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, you will receive a free temporary registration plate from us. We repair trailers from all manufacturers. Additional accessories available on request. Subject to technical changes, price modifications and errors. No liability for inaccuracies or typographical errors. Features: automatic reverse, torsion rubber axle, independent wheel suspension, box body, all trailers come with a jockey wheel, braked models with bolted V-drawbar, marker lights, fully welded and hot-dip galvanized chassis, braked, incl. warranty, trailer with 2 rear doors, multiplex walls with plastic coating, loading floor height 53 cm, multiplex floor with 15 mm anti-slip coating, tie-down loops integrated in side rails, foldable jockey wheel, V-drawbar, front handles, interior lighting. Dedstmfdbepfx Af Uokg

Stanje: novo, številka stroja/vozila: Hapert Indigo LF-2 3,55×1,69m 3500kg niedriges Fahrwerk, lastna masa: 787 kg, največja dovoljena obremenitev: 2.713 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.540 mm, širina tovornega prostora: 1.690 mm, višina nakladalnega prostora: 195 mm, Tailgate ramp - Continuous rear tailgate, 1.20 m high - With support bars - Optimized loading angle of 16° - Spring-assisted steel ramp, lifting aid - HAPERT locking system: robust double-action locks Chassis and frame - Low loading height of 34 cm - Drawbar coupling with safety indicator - Fully welded and hot-dip galvanized chassis - Bolted V-drawbar - Height-adjustable HAPERT automatic jockey wheel with hardened running surface Loading platform and floor - Continuous, non-slip and waterproof phenolic plywood floor - Finnish birch multiplex, 11-layer, waterproof bonded Dodei A D S Sjpfx Af Uskg - 15 mm thickness - Step plate at rear end Lighting - With reversing light - With rear fog light - Two LED front position lights - 13-pin connector Wheels and axles - Robust rubber suspension axle - With reverse drive automatic system - Maintenance-free compact wheel bearings - Durable, impact-resistant side strips with HAPERT Safety Steps - Equipped with mud flaps - Wheel chocks with bracket Securing and lashing options - TÜV-certified HAPERT load securing system - 10 recessed, DIN-standard, chassis-integrated lashing rings, 1000 daN (kg) per ring - Combi Protect Rail Documents and freight charges - Freight charges to us already included - Including vehicle registration document (Registration Certificate Part II) - Including COC document (EC Certificate of Conformity) - No additional unwanted costs - Downrating possible for a fee (TÜV fee only) You can find more offers and information on our homepage. Since we cannot link directly, simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes, and prior sale excepted.

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 1.740 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 1,2 m³, barva: drugo, gradbena višina: 1.850 mm, delovna širina: 2.280 mm, Manufacturer: Hapert Model: Low Loader Indigo LF-2 Permissible total weight: 3,500 kg Payload: 2,600 kg Unladen weight: 900 kg Box dimensions: 3,600 x 1,740 x 200 mm Tyres: 195/50 R13C Loading height: 410 mm with full-length mesh ramp Non-tilting loading area Includes 100 km/h approval Includes parabolic suspension instead of rubber torsion axle - Chassis fully welded and hot-dip galvanized - TÜV-approved load securing system - Heavy-duty foldable support wheel - 4 HAPERT Safety Steps (anti-slip coating) - Continuous, hot-dip galvanized rear gate, 150 cm high - Only original BPW parts used - 10 lashing rings Price includes vehicle registration document (Registration Certificate Part II and COC papers) Dkedpstmfdfofx Af Uog We have a wide selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we provide a free temporary registration plate for transfer. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for mistakes or misprints. Automatic reverse function, loading ramp, non-tilting loading surface, heavy-duty foldable support wheel, marker lights, 150 cm high fully hot-dip galvanized rear gate, braked, includes warranty, with full-length mesh ramp, fully welded and hot-dip galvanized chassis, TÜV-approved load securing system, 4 HAPERT Safety Steps (anti-slip), continuous, only original BPW parts used.

Stanje: novo, številka stroja/vozila: Hapert Indigo HT-2 4,05×2,01m 3500kg, lastna masa: 820 kg, največja dovoljena obremenitev: 2.680 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 300 mm, Oprema: nalagalnik, Side Panels, Railings, and More - Combi-Protect Railing Loading Ramp - Fully welded and immersion hot-dip galvanized ramp - Ramp height: one meter - With gas strut for lifting and lowering assistance - Drive-on angle: 13° Chassis and Frame - Hydraulically tiltable platform - Low loading bed - Trailer coupling with safety indicator - Chassis fully welded and fully hot-dip galvanized - Frame extra reinforced with two additional longitudinal beams - V-drawbar Loading Platform and Floor - Continuous, slip-resistant, and waterproof phenolic plywood floor - 15 mm thick - Finnish birch plywood, 11-ply, water-resistant bonded Lighting Equipment - Modern multifunction lighting - With reversing light - With rear fog lamp - With two LED front marker lights - 13-pin plug Wheels and Axles - Robust rubber suspension axle - Maintenance-free compact wheel bearings - With automatic reverse function Dedpfx Asi Td Nbof Uekg - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with holder Lashing and Securing Options - HAPERT cargo securing system, certified by TÜV - 8 recessed frame-integrated tie-down rings according to DIN standard, each with 1000 daN (kg) per ring Additional Standard Equipment - Adjustable winch bracket with cable winch - Height-adjustable Hapert automatic jockey wheel with hardened running surface Documents and Freight Costs - Freight costs to us already included - Including vehicle registration certificate (Part II) - Including COC document (EC Certificate of Conformity) - No additional unwanted costs - Downrating available for an extra charge (TÜV fee only) For further offers and information, please visit our website. Direct linking is not permitted, so simply enter "Dapper Anhänger" in your search engine.

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.200 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: zelen, gradbena višina: 2.570 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-way Tipper HM-2 Gross Vehicle Weight: 3,000 kg Payload: 2,200 kg Unladen Weight: 800 kg Body Dimensions: 3,050 x 1,800 x 300 mm Fitted with green tarpaulin (RAL 6005) and 180 cm bow frame, internal height measured, with self-rolling rear flap Tyres: 185 R14C Loading Height: 750 mm Equipped with electrohydraulic tipping Three-way tipper features: - Fully welded and hot-dip galvanized chassis - Robust hydraulic cylinder with electric pump - Galvanized steel sheet on multipurpose plywood floor - TÜV-certified load securing system - New tailgate hinges, including an easy mounting system, e.g. for load nets Dedpfxstmfh Rs Af Uekg - 4 removable corner stanchions - Aluminium walls, 30 cm high, with sturdy integrated catches - Heavy-duty foldable jockey wheel - Only BPW genuine parts used - 13-pin plug Price includes vehicle registration document (Zulassungsbescheinigung Part II and COC papers). We stock a large selection of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices, and errors subject to change. No liability for omissions or typographical errors. Additional features: Hydraulic cylinder with hand pump, reverse automatic, rubber suspension axle, independent suspension, tiltable loading area, high tarpaulin, heavy-duty foldable jockey wheel, marker lights, galvanized steel sheet on multipurpose plywood base, overrun brake, includes warranty, fully welded and hot-dip galvanized chassis, TÜV-certified load securing system, new tailgate hinges with easy mounting for accessories including load nets, 4 removable corner stanchions, aluminium sides 30 cm high with robust recessed locks, only BPW genuine components, 13-pin plug.

Stanje: novo, številka stroja/vozila: Hapert Indigo LF-2 3,05×1,59m 3500kg niedriges Fahrwerk, lastna masa: 762 kg, največja dovoljena obremenitev: 2.738 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.040 mm, širina tovornega prostora: 1.590 mm, višina nakladalnega prostora: 195 mm, Ramp - Continuous rear ramp, height 1.20 m - With support brackets - Optimized ramp angle of 16° - Spring-assisted ramp, lifting aid - HAPERT locking system: robust double-action locks Chassis and Frame - Low loading height of 34 cm - Ball coupling with safety indicator - Fully welded and hot-dip galvanized chassis - Bolted V-drawbar - Height-adjustable Hapert automatic jockey wheel with hardened running surface Loading Platform and Floor - Continuous, anti-slip and waterproof phenolic plywood floor - Finnish birch plywood, 11-ply, waterproof bonded Dodpei A D Tasfx Af Uekg - 15 mm thick - Step board at the rear Lighting Equipment - With reversing light - With rear fog light - With two LED front position lights - 13-pin connector Wheels and Axles - Robust rubber suspension axle - With reverse-automatic system - Maintenance-free compact wheel bearings - Durable, impact-resistant side rails with HAPERT Safety Steps - Fitted with mud flaps - Wheel chocks with holders Lashing and Securing Options - TÜV-certified load securing system by HAPERT - 10 recessed, frame-integrated securing loops to DIN standard, 1000 daN (kg) per ring - Combi Protect Rail Documents and Freight Charges - Freight charges to us already included - Vehicle registration document (registration certificate part 2) included - COC document (EC certificate of conformity) included - No further unwanted costs - Downrating possible for a surcharge (TÜV fee only) You can find further offers and information on our website. As I am not allowed to link it directly, simply search for "Dapper Anhänger" in your search engine. Photos may show optional accessories. Subject to errors, changes, and prior sale.

Stanje: novo, lastna masa: 800 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, barva: drugo, gradbena višina: 2.700 mm, delovna širina: 2.050 mm, Oprema: kabelska vitla, Manufacturer: Hapert Model: Indigo HF-2 High Loader Transporter Permissible Gross Weight: 3000 kg Payload Capacity: 2100 kg Unladen Weight: 900 kg Body Dimensions: 4050 x 2000 mm Equipped with: black tarpaulin and 200 cm-high bows, internal height Tyres: 195/50 R13C Loading Height: 660 mm Hydraulically tipper high loader transporter - Chassis fully welded and fully hot-dip galvanized - Multiplex floor panel with anti-slip coating - TÜV-certified load securing system - Fixed Combi Protect Rail at the front and sides - Continuous, fully hot-dip galvanized tailgate, 100 cm high, with gas struts - Winch with winch support bracket - Heavy-duty foldable jockey wheel - Double-acting hydraulic cylinder with hand pump - Only original BPW components used - 13-pin plug Dkedstmfh Hopfx Af Ueg Price includes vehicle documentation (registration certificate Part II and COC papers) We stock a large selection of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we provide free temporary number plates for transfer. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Features: reverse drive automatic, loading ramp, hydraulically tilting high loader transporter, cable winch, high tarpaulin, heavy-duty foldable jockey wheel, side marker lights, fully hot-dip galvanized 100 cm-high tailgate, braked, including warranty, chassis fully welded and fully hot-dip galvanized, multiplex floor panel with anti-slip coating, TÜV-certified load securing system, fixed Combi Protect Rail at front and sides, continuous winch with winch support bracket, double-acting hydraulic cylinder with hand pump, only BPW-original parts used.

Stanje: novo, številka stroja/vozila: Hapert Indigo HT-2 5,05x2,21m 3500kg mit Bordwänden, lastna masa: 1.156 kg, največja dovoljena obremenitev: 2.344 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.050 mm, širina tovornega prostora: 2.210 mm, višina nakladalnega prostora: 300 mm, Side Wall, Railing and More - 30 cm high aluminium drop sides, removable - Corner stanchions are slot-in type - HAPERT locking system: robust, recessed locks with dual action Loading Ramp - Welded and hot-dip galvanized ramp - Ramp height: one meter - With gas pressure dampers for lifting and lowering assistance - Climbing angle: 10.5° Attachment Options for Tarpaulins and Nets - New drop side hinges including mounting option for, among others, a cargo net Chassis and Frame - Hydraulically tiltable platform - Low loading height - Tow ball coupling with safety indicator - Chassis fully welded and hot-dip galvanized - Frame reinforced with two additional longitudinal beams - V-drawbar Dedsh Ewxxjpfx Af Uskg Loading Area and Floor - Continuous, slip-resistant, and waterproof phenolic plywood floor - 15 mm thick - Finnish birch plywood, 11-layer, waterproof, hot-pressed Lighting Equipment - Modern multifunctional lighting - With reversing light - With rear fog lamp - With two LED front marker lights - 13-pin plug Wheels and Axles - Combination spring / axle suspension system - Parabolic suspension including shock absorbers - Smooth ride quality - With automatic reverse system - Tires 195/50R13C with black rims - Maintenance-free compact wheel bearings Lashing and Securing Options - TÜV-certified cargo restraint system from HAPERT - 12 recessed frame-integrated lashing rings according to DIN standard, rated at 1000 daN (kg) per ring Further Standard Equipment - Adjustable winch post with cable winch - Height-adjustable Hapert automatic jockey wheel with hardened running surface Documents and Freight Costs - Freight costs to us already included - Including vehicle registration document (Part II) - Including COC document (EC Certificate of Conformity) - No hidden or unexpected extra costs - Downrating possible for a surcharge (TÜV fee only) More offers and information can be found on our homepage. As direct linking is not permitted, simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes, and prior sale excepted.

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 2.375 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 1.620 mm, delovna širina: 1.870 mm, Manufacturer: Hapert Model: Cobalt+ 3-way tipper Gross Vehicle Weight: 3,500 kg Payload: 2,375 kg Dodpfx Aev S D Tgsf Ujkg Unladen Weight: 1,125 kg Platform Dimensions: 3,350 x 1,800 x 400 mm Tyres: 185/70 R13 C Loading Height: 725 mm 3-way tipper trailer: - Chassis fully welded and hot-dip galvanized - Robust 5-stage hydraulic cylinder with electrically operated pump and emergency hand pump installed - One-piece, 3 mm thick, hot-dip galvanized steel sheet platform - TÜV-approved load securing system - 4 removable corner stanchions - Steel side walls, 35 cm high, KTL and powder coated in anthracite with heavy-duty recessed locks - Reinforced trailer frame - Parabolic spring suspension instead of rubber axle and shock absorbers mounted, loading height 72.5 cm - 100 km/h approval - Tyres 185/70 R13 C incl. black rims - Reinforced jockey wheel and special jockey wheel bracket - Reinforced 2.5 m aluminium loading ramps integrated under the floor, incl. U-profile - Stable fold-out crank supports - Lighting protector installed - Reinforced Cobalt+ mesh sides - Battery charger supplied loose Price includes vehicle registration documents (vehicle title [Zulassungsbescheinigung Part II] and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free transfer plate from us. We repair trailers from all manufacturers. Additional accessories available upon request. Technical changes, price adjustments, and errors excepted. No liability for mistakes or typographical errors. Features overview: Reinforced 2.5 m aluminium loading ramps integrated under the floor, robust 5-stage hydraulic cylinder with electric and emergency hand pump, auto-reverse, rubber torsion axle, independent suspension, tiltable platform, reinforced jockey wheel and special bracket, marker lights, 3 mm thick hot-dip galvanized steel platform, overrun brake, loose battery charger supplied, includes warranty, fully welded and hot-dip galvanized chassis, one-piece platform, TÜV-approved load securing system, 4 removable corner stanchions, 35 cm high steel side walls, KTL and powder coated in anthracite with heavy-duty recessed locks, reinforced trailer frame, parabolic spring and shock absorbers installed, loading height 72.5 cm, tyres 185/70 R13 C incl. black rims, includes U-profile, stable fold-out crank supports, lighting protector, reinforced Cobalt+ mesh sides.

Stanje: novo, številka stroja/vozila: Hapert Indigo LF-2 4,05×1,79m 3500kg, lastna masa: 859 kg, največja dovoljena obremenitev: 2.641 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 1.790 mm, višina nakladalnega prostora: 195 mm, Ramp - Full-width rear ramp, 1.20 m high - With support brackets - Optimized drive-on angle of 16° - Steel spring-assisted ramp, lifting aid - HAPERT locking system: robust double-action latches Chassis and Frame - Low loading height of 34 cm - Ball coupling with safety indicator - Chassis fully welded and hot-dip galvanized Dodpei A D S Isfx Af Uokg - Bolted V-drawbar - Height-adjustable HAPERT automatic jockey wheel with hardened running roller Load Area and Floor - Continuous, slip-resistant and waterproof phenolic resin plywood floor - 11-ply Finnish birch plywood, waterproof bonded - 15 mm thick - Step plate at the rear Lighting Equipment - With reversing light - With rear fog light - With two LED front marker lights - 13-pin connector Wheels and Axles - Robust rubber suspension axle - With automatic reversing system - Maintenance-free compact wheel bearings - Robust, impact-resistant side rails with HAPERT Safety Steps - Equipped with spray protection flaps - Wheel chocks with holder Lashing and Securing Options - TÜV-certified HAPERT load securing system - 10 recessed, frame-integrated lashing brackets to DIN standard, 1000 daN (kg) per ring - Combi Protect Rail Documents and Freight Costs - Freight costs to us already included - Includes registration certificate (Zulassungsbescheinigung Teil 2) - Includes COC document (EC Certificate of Conformity) - No further unwanted costs - Downrating possible at extra cost (TÜV fee only) You can find more offers and information on our homepage. As I am not allowed to link directly, please simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Subject to errors, changes, and prior sale.

Stanje: novo, lastna masa: 425 kg, največja dovoljena obremenitev: 1.350 kg, skupna masa: 1.800 kg, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 5,9 m³, barva: bela, gradbena višina: 2.380 mm, delovna širina: 1.750 mm, Manufacturer: Hapert Model: Lowloader Box Trailer Sapphire Permissible Gross Weight: 1,800 kg Payload: 1,350 kg Unladen Weight: 450 kg Box Dimensions: 2,500 x 1,300 x 1,800 mm Tyres: 185 R14C Loading Height: 530 mm Equipped with 2 rear doors - 15 mm multiplex side walls with plastic coating - 2 rear doors - 2 handles at the front for easier maneuvering of the trailer - Hinges, locks, and mounting hardware made from stainless steel - 15 mm multiplex wooden floor with anti-slip surface - TÜV-certified cargo securing system from Hapert: securing brackets integrated into the side rails - Bolted V-drawbar - Fully welded, hot-dip galvanised chassis suitable for up to 3,500 kg gross weight - Solid foldable jockey wheel Price includes registration certificate (Registration Part II and COC documents) Large selection of trailers from Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun in stock Free transit license plate available on request We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber torsion axle, independent suspension, box trailer, all trailers equipped with a jockey wheel, braked models feature a bolted V-drawbar, marker lights, fully welded and hot-dip galvanised chassis, braked, includes warranty, trailer with 2 rear doors, multiplex walls with plastic coating, loading floor height 53 cm, 15 mm anti-slip multiplex floor, lashing brackets integrated into the side rails, folding jockey wheel, V-drawbar, front handles, interior lighting. Djdpfx Afofka Ifj Ujkg

Stanje: novo, številka stroja/vozila: hapert Cobalt HM-2 3,05x1,80m 2700kg Dreiseitenkipper Handpumpe niedriges Fahrwerk, lastna masa: 824 kg, največja dovoljena obremenitev: 1.876 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, Hydraulics (Tipping and Lowering System) - Three-way tipper - Tipping angle: 51 degrees rear, 45 degrees lateral - Robust OMFB pump, centrally and securely mounted - Double-acting pump system - 4-stage hydraulic cylinder Side Panels, Railings, and Accessories - Additional side panel hinges for increased stability and resistance to pressure - Three hinges at the front and five on the sides - Double-walled anodized aluminum drop sides, 30 cm high - Drop sides foldable and removable on all sides - Corner posts plug-in design - Quick conversion to flatbed trailer - Durable, high-quality corrosion protection - HAPERT locking system: robust, recessed double-action locks Attachment Options for Tarpaulins and Nets - New side panel hinges including attachment option for, among others, a cargo net Chassis and Frame - Chassis fully welded and hot-dip galvanized - Tipper bridge fully welded and hot-dip galvanized - Bolted V-drawbar - U-profile at the rear for easier attachment of loading ramps - Low profile running gear, tires 195/50R13C - Ball-head coupling with safety indicator - Height-adjustable Hapert automatic jockey wheel with hardened running surface Loading Platform and Floor - Galvanized steel plate mounted on multiplex floor - Sendzimir galvanized steel sheet, 1.5 mm thick - Continuous, waterproof multiplex flooring - Finnish birch plywood, 11-ply, water-resistant, hot-pressed - 15 mm thick Lighting Equipment - Modern multifunctional lighting Dkedeh Ewxmopfx Af Ueg - With rear fog light - With reverse light - With front LED marker lights - 13-pin plug Wheels and Axles - Heavy-duty rubber spring axle - With automatic reverse mechanism - Maintenance-free compact wheel bearings - Impact-resistant plastic fenders - With splash guards - Wheel chocks with holder Lashing and Securing Options - TÜV-certified HAPERT load-securing system - 6 recessed, frame-integrated lashing rings according to DIN standards, 1000 daN (kg) per ring - Additional recessed, frame-integrated lashing rings can be retrofitted Documents and Freight Costs - Freight costs to us already included - incl. vehicle registration document (registration certificate part II) - incl. COC document (EC Certificate of Conformity) - No additional unwanted costs - Load reduction available for an additional charge (pure TÜV fee) You will find further offers and information on our website. We are not permitted to link directly, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional equipment. Errors, modifications, and prior sale reserved.

Stanje: novo, lastna masa: 600 kg, največja dovoljena obremenitev: 1.400 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 8,1 m³, barva: bela, gradbena višina: 2.390 mm, delovna širina: 2.000 mm, Manufacturer: Hapert Model: Low-Loader Box Trailer Sapphire L-2 Permissible Gross Weight: 2000 kg Payload: 1400 kg Unladen Weight: 600 kg Box Dimensions: 3000 x 1500 x 1800 mm Tyres: 175 R14C Loading Height: 530 mm with 2 rear doors Walls: 15 mm ABS (outermost layer smooth coating) The outermost smooth coating of these panels significantly simplifies lettering or branding of the trailer. - 2 rear doors. - 2 front-mounted handles facilitate maneuvering of the trailer. - Hinges, locks/latches, and all fasteners in stainless steel. - 15 mm multiplex wooden floor with anti-slip surface. - Hapert TÜV-certified load securing system: integrated lashing rings in the side rails. - Bolted V-drawbar. - Completely welded and fully hot-dip galvanized chassis suitable for up to a maximum of 3500 kg gross weight. - Sturdy foldable jockey wheel. Dkedjtmfhuopfx Af Ujg Price includes vehicle registration documents (Part II Registration Certificate and CoC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate for transfer. We repair trailers of all makes. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reverse-automatic, rubber spring axle, independent wheel suspension, box body. All trailers are equipped with a jockey wheel, and the braked models feature a bolted V-drawbar. Marker lights, chassis fully welded and hot-dip galvanized, braked, includes warranty, trailer with 2 rear doors, multiplex walls with plastic coating, loading floor height 53 cm, multiplex floor with 15 mm anti-slip coating, lashing rings integrated in the side rails, foldable jockey wheel, V-drawbar, front handles, interior lighting.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Hapert Cobalt Plus Tandemachser 4,05×2,00×0,40m 3500kg Dreiseitenkipper, lastna masa: 1.316 kg, največja dovoljena obremenitev: 2.184 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 3,24 m³, Hydraulics (Tipping and Lowering System) - Electric three-way tipper - Tipping angle: rear 49°, sides 45° - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering possible using the emergency hand pump - 12V battery and hydraulic unit protected in a steel box - Removable tipping control unit with long spiral cable - 3-phase charge status indicator on the tipping control unit - 7-pin socket mounted on the trailer with charging line Ramps Package - Integrated rail compartment in the frame behind the license plate - Two reinforced aluminium loading ramps, 2.50 m long with anti-slip protection - Two robust crank supports, foldable via pull mechanism - One hand crank with holder Sidewalls, Railings and More Dsdpfevf Nvmjx Af Ujkg - High front grid - Additional sidewall hinges for increased stability and load resistance - Three hinges on the front, six on the sides - Double-walled powder-coated aluminium sidewalls, 40 cm high - Sidewalls foldable and detachable on all sides - Plug-in corner stanchions - Quick conversion to a flatbed trailer - Durable, high-quality corrosion protection - HAPERT locking system: robust, recessed locks with dual action Attachment Options for Tarps and Nets - New sidewall hinges including attachment options for load nets, etc. Chassis and Frame - Fully welded and hot-dip galvanized chassis - Tipping bridge fully welded and hot-dip galvanized - Bolted V-drawbar - U-profile at the rear for easy placement of loading ramps - Low chassis height - Ball coupling with safety indicator - Reinforced jockey wheel and mounting bracket Loading Area and Floor - One-piece galvanized steel floor - 3 mm thick galvanized steel plate Lighting Equipment - LED lighting and lighting protection - Modern multifunction lighting - With rear fog lamp - With reversing light - With front marker lights - 13-pin plug Wheels and Axles - Combined suspension/wheel mounting system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - Tyres: 185/70R13C with black rims - Maintenance-free compact wheel bearings - With automatic reversing mechanism Lashing and Securing Options - TÜV-certified load securing system by HAPERT - 6 recessed lashing rings integrated into the frame according to DIN standard with 1000 daN (kg) per ring - Additional recessed lashing rings can be retrofitted Documents and Freight Costs - Freight costs to us already included - Vehicle registration certificate (part 2) included - COC document (EC certificate of conformity) included - No additional unwanted costs - Load reduction available for an extra charge (TÜV fee only) You will find further offers and information on our homepage. We are not allowed to link directly, so simply enter “Dapper Anhänger” in your search engine. Photos may display optional accessories. Errors, changes and prior sale excepted.

Stanje: novo, lastna masa: 800 kg, največja dovoljena obremenitev: 2.200 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 1.070 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Permissible gross weight: 3,000 kg Payload: 2,200 kg Unladen weight: 800 kg Bed dimensions: 3050 x 1800 x 300 mm Tyres: 185 R14C Loading height: 750 mm with electro-hydraulic system 3-way tipper Dkodetmfhxepfx Af Ueg - Fully welded and hot-dip galvanized chassis - Heavy-duty hydraulic cylinder with electric pump - Galvanized steel sheet on multiplex floor panel - TÜV-certified cargo securing system - New side panel hinges incl. very easy attachment option for e.g. a load net - 4 removable corner stanchions - Aluminum side walls, 30 cm high, with robust recessed locks - Heavy-duty folding jockey wheel - Only genuine BPW parts used - 13-pin connector Price includes the registration certificate (Part II of the registration document and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we offer a free transit registration plate. We service trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or printing mistakes. Features: hydraulic cylinder with hand pump, reverse automatic mechanism, rubber suspension axle, independent wheel suspension, tiltable loading platform, heavy-duty folding jockey wheel, marker lights, galvanized steel sheet on multiplex floor, overrun brake, including warranty, fully welded and hot-dip galvanized chassis, TÜV-certified cargo securing system, new side panel hinges incl. very easy attachment option for e.g. a load net, 4 removable corner stanchions, aluminum side walls, 30 cm high, with robust recessed locks, only genuine BPW parts used, 13-pin connector.

Stanje: novo, lastna masa: 600 kg, največja dovoljena obremenitev: 1.400 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 8,1 m³, barva: bela, gradbena višina: 2.390 mm, delovna širina: 2.000 mm, Manufacturer: Hapert Model: Low-loader box trailer Sapphire L-2 Permissible total weight: 2000 kg Payload: 1400 kg Unladen weight: 600 kg Box dimensions: 3000 x 1500 x 1800 mm Tyres: 175 R14C Loading height: 530 mm with 2 rear doors - Multiplex walls, 15 mm, coated with plastic. - 2 rear doors. - 2 front handles for easier manoeuvring of the trailer. - Hinges, lock(s), and mounting materials made from stainless steel. - Multiplex wooden floor with 15 mm anti-slip surface. - TÜV-certified load securing system from Hapert: tie-down loops integrated in the side rail. - Bolted V-drawbar. - Fully welded and fully hot-dip galvanised chassis, suitable for up to 3500 kg GVWR. - Solid, foldable jockey wheel. Price includes registration documents (Part II of registration certificate and COC papers) We have a large inventory of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary registration plate. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes and errors excepted. No liability for errors and typographical mistakes. Reverse automatic brake, rubber spring axle, independent suspension, box body, all trailers have a jockey wheel and braked models are equipped with a bolted V-drawbar, marker lights, fully welded and hot-dip galvanised chassis, braked, incl. warranty, trailer with 2 rear doors, multiplex walls with plastic coating, loading floor height 53 cm, multiplex floor with 15 mm anti-slip coating, tie-down eyes integrated in the side rails, foldable jockey wheel, V-drawbar, front handles, interior lighting. Dksdpfxofka Hvj Af Ujg

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: drugo, gradbena višina: 1.070 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Ferro Permissible total weight: 3500 kg Payload: 2600 kg Unladen weight: 900 kg Cargo bed dimensions: 3350 x 1800 x 300 mm Tyres: 185 R 14C black steel rims Loading height: 750 mm 3-way tipper - parabolic suspension incl. 100 km/h certification - Chassis fully welded and fully hot-dip galvanized - Robust hydraulic cylinder with electric pump and manual emergency pump - Cargo floor made of hot-dip galvanized steel sheet - TÜV-certified load securing system - 4 removable corner stanchions - Aluminium side walls, 30 cm high, with robust recessed locks - Heavy-duty folding jockey wheel - Aluminium loading ramps integrated underneath the floor, incl. U-profile - Stable foldable crank supports - Separate battery charger supplied - Only genuine BPW parts used - 13-pin connector Price includes vehicle registration certificate (registration document Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide you with a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for mistakes or misprints. Aluminium loading ramps integrated under the floor, robust hydraulic cylinder with electric pump, automatic reverse function, rubber suspension axle, independent wheel suspension, tilting cargo bed, heavy-duty folding jockey wheel, marker lights, cargo floor made of hot-dip galvanized steel sheet, overrun brake, including warranty, chassis fully welded and hot-dip galvanized, TÜV-certified load securing system, 4 removable corner stanchions, aluminium side walls, 30 cm high, with robust recessed locks, incl. U-profile, stable fold-out crank supports, separate battery charger supplied, only genuine BPW parts used, 13-pin connector. Dedpfx Astmd U Ejf Uokg

Stanje: novo, lastna masa: 740 kg, največja dovoljena obremenitev: 2.240 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 1 m³, barva: drugo, gradbena višina: 1.850 mm, delovna širina: 2.180 mm, Manufacturer: Hapert Model: Indigo LF-2 Flatbed Trailer Approved Gross Weight: 3,000 kg Payload: 2,240 kg Unladen Weight: 760 kg Bed Dimensions: 3,100 x 1,640 x 200 mm Tyres: 195/50 R13C Loading Height: 410 mm With continuous grating ramp Djdpfotmd Utjx Af Uokg Non-tiltable loading platform - Chassis fully welded and hot-dip galvanized - TÜV-certified load securing system - Heavy-duty, foldable jockey wheel - 4 HAPERT Safety Steps (anti-slip tread) - Full-width hot-dip galvanized rear tailgate, 150 cm high - Only genuine ALKO parts used Price includes vehicle registration documents (Certificate of Registration Part II and COC papers). We stock a large assortment of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration plate for transportation. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, pricing, and other details subject to change. No liability for errors or misprints. Reverse automatic function, drive-up ramp, non-tiltable platform, heavy-duty foldable jockey wheel, marker lights, continuous hot-dip galvanized rear tailgate (150 cm high), braked, incl. warranty, with continuous grating ramp, fully welded and hot-dip galvanized chassis, TÜV-certified load securing system, 4 HAPERT Safety Steps (anti-slip tread), only genuine BPW parts used.

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 1.110 kg, skupna masa: 1.500 kg, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,2 m³, barva: drugo, gradbena višina: 930 mm, delovna širina: 1.560 mm, Manufacturer: Hapert Model: Cobalt Rear Tipper HB-1 Dedpfxotmd Uze Af Uokg Permissible Total Weight: 1,500 kg Payload: 1,110 kg Unladen Weight: 390 kg Bed Dimensions: 2,600 x 1,500 x 300 mm Tires: 195/50 R13C Loading Height: 630 mm Single axle rear tipper trailer - Chassis fully welded and hot-dip galvanized - Standard low chassis with 195/50R13 tires - Robust hydraulic cylinder with hand pump - TÜV-certified load securing system - New drop side hinges including very easy fastening options for, among other things, a load net - 4 removable corner stanchions - 30 cm high aluminum sidewalls with sturdy flush-mounted locks - Heavy-duty foldable jockey wheel - Galvanized steel sheet on multiplex floor plate - 13-pin connector Price includes vehicle registration document (Part II registration document and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide free temporary transit number plates. We repair trailers of all manufacturers. Additional accessories available on request. Subject to technical modifications, price changes, and errors. No liability for mistakes or typographical errors. Equipment details: hydraulic cylinder with hand pump, automatic reversing, rubber torsion axle, independent suspension, tiltable loading platform, heavy-duty foldable jockey wheel, marker lights, galvanized steel sheet on multiplex floor, overrun brake, includes warranty, fully welded and hot-dip galvanized chassis, standard low chassis with 195/50R13 tires, TÜV-certified load securing system, new sidewall hinges incl. very easy attachment possibility for load net, four removable corner stanchions, 30 cm high aluminum sidewalls with robust flush-mounted locks, only BPW original parts used, 13-pin connector.

Stanje: novo, lastna masa: 425 kg, največja dovoljena obremenitev: 925 kg, skupna masa: 1.350 kg, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 4,9 m³, barva: bela, gradbena višina: 2.080 mm, delovna širina: 1.750 mm, Manufacturer: Hapert Model: Lowloader Box Trailer Sapphire Permissible total weight: 1350 kg Payload: 925 kg Unladen weight: 425 kg Box dimensions: 2500 x 1300 x 1500 mm Tyres: 185 R14C Loading height: 530 mm Dkedpfx Asw Df D Nof Uog with 2 rear doors - 15 mm multiplex walls, plastic-coated - 2 rear doors - 2 handles at the front for easier manoeuvring of the trailer - Hinges, locks and fastening materials made of stainless steel - Multiplex wooden floor with 15 mm anti-slip surface - TÜV-certified load securing system by Hapert: tie-down rings integrated into the side rails - Bolted V-drawbar - Fully welded and hot-dip galvanised chassis, suitable for up to max. 3500 kg GVWR - Solid foldable jockey wheel Price incl. vehicle documents (registration certificate part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical changes, price alterations, and errors excepted. No liability is accepted for errors and misprints. Reverse automatic, rubber torsion axle, individual wheel suspension, box body All trailers have a jockey wheel, and the braked models are equipped with a bolted V-drawbar. Marker lights, fully welded and hot-dip galvanised chassis, braked, incl. warranty, trailer with 2 rear doors, multiplex walls plastic-coated, loading floor height 53 cm, multiplex floor with 15 mm anti-slip coating, tie-down loops integrated into side rails, foldable jockey wheel, V-drawbar, front handles, interior lighting.

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.150 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 13 m³, barva: bela, gradbena višina: 2.380 mm, delovna širina: 2.250 mm, Manufacturer: Hapert Model: Low-loader box trailer Sapphire L-2 Permissible gross weight: 3,000 kg Payload: 2,150 kg Unladen weight: 850 kg Box dimensions: 4,000 x 1,800 x 2,100 mm Tyres: 175 R14C Loading height: 530 mm with 2 rear doors - 15 mm multiplex walls, plastic-coated. - 2 rear doors. - 2 handgrips on the front make manoeuvring the trailer easier. - Hinges, lock(s), and mounting hardware all made of stainless steel. - 15 mm multiplex wooden floor with anti-slip surface. - TÜV-certified Hapert load securing system: tie-down rings integrated into the side rails. - Bolted V-drawbar. - Fully welded and hot-dip galvanised chassis, suitable for up to 3,500 kg max. permissible gross weight. - Robust foldable jockey wheel. Price includes vehicle registration document (registration certificate part II and COC papers). We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free transit registration plate. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We do not accept liability for mistakes or printing errors. Reversing automatic, rubber spring axle, independent suspension, box body, all trailers include a jockey wheel and braked models feature a bolted V-drawbar, marker lights, fully welded and hot-dip galvanised chassis, braked, including warranty, trailer with 2 rear doors, plastic-coated multiplex walls, loading floor height 53 cm, anti-slip multiplex floor 15 mm, tie-down rings integrated into side rails, foldable jockey wheel, V-drawbar, handgrips on the front, interior lighting. Dksdpjtmd Erjfx Af Usg