Unsinn Prodajna Prikolica nakup rabljenega (135)

Stanje: novo, Box trailer with double-wing rear door and side door Manufacturer: Unsinn Model: UKU 301519-20-13 Door Internal dimensions: 3050 x 1570 x 1940 mm (L x W x H) Rsdoy I E Ayepfx Aphjcf Permissible total weight: 2,000 kg Unladen weight: approx. 520 kg Payload: approx. 1,480 kg (Payload may vary depending on configuration and equipment) Loading height: approx. 530 mm Double-wing rear door with aluminium hinges Stainless steel door retainers Side door on the right-hand side (in direction of travel) Colour: White RAL 9016 Unique, torsion-resistant aluminium chassis for safe handling Walls made from lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal trailer signage/wrapping (Unique-Panel) Steel-reinforced interior walls provide high impact resistance Loading floor made from multiple-bonded screen printing panel, 18 mm thick, anti-slip and waterproof Load securing system with 8 adjustable lashing rings for optimal load securing Slatted load securing rails on side walls and front wall, height 900 mm Transparent light roof with high light transmission Rear frame and edging profiles made from special anodised aluminium profiles Magnetic, swivelling LED interior light incl. motion detector (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing lights Front marker lights Two manoeuvring handles on the front wall AL-KO coupling head with collision protection Incl. vehicle documents Possible additional options and accessories for this trailer: Spare wheel Anti-theft device Restraint bar Shock absorbers incl. 100 km/h approval Support stands Custom interior conversions Registration of your new trailer at the vehicle registration office

Stanje: novo, Special offer! Stock vehicle from 2022! No initial registration! 9929367 Sales trailer with stylish rounded corners Manufacturer: Unsinn Model: VM 1836-13-2040 Gross vehicle weight: 1,800 kg Unladen weight: approx. 970 kg Payload: approx. 830 kg (payload may vary depending on equipment and construction) Dimensions: approx. 3,600 mm x 2,040 x 2,300 mm (L x W x H) Rcodsy I R U Iepfx Aphef Loading height: approx. 430 mm Fully welded chassis, hot-dip galvanized by immersion Reinforced automatic jockey wheel 4 sturdy scissor supports ensure stable parking Thermo-sandwich body Inner and outer skins made of hot-dip galvanized and powder-coated steel 40 mm PU core insulation Exterior colour: silver RAL 9006 Access door in the front wall, 2,000 x 650 mm, with integrated personnel lock Step on drawbar Sales hatch on the right in the direction of travel, with robust rotary latch External door for gas cylinder compartment 18 mm anti-slip phenolic plywood floor with tough PVC covering Lighting with 13-pin plug and reversing light Including vehicle documents Options and accessories available for this trailer: Shock absorbers including 100 km/h certificate Custom interior fittings Spare wheel including holder Anti-theft device Registration of your new trailer at the local vehicle licensing authority We are happy to show you how to finance your new trailer in convenient monthly installments and will provide you with a customized financing offer. We have more than 2,000 trailers in stock at all times. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show optional equipment not included in the standard scope of delivery. Due to ongoing improvements, images and technical data may differ slightly. Errors and changes excepted!

Stanje: novo, skupna masa: 3.000 kg, dolžina tovornega prostora: 4.260 mm, širina tovornega prostora: 2.040 mm, Leto izdelave: 2026, Pri ANHÄNGERWIRTZ je na voljo veliko modelov, ki so dostopni na spletu. Udobno in kadar koli kupujte na spletu na trailershop.de. Izberite možnost samostojnega prevzema ali dostave. Spletna trgovina, kjer lahko kupite svoj novi prikolico, ponuja vrhunske blagovne znamke! Na zalogi je več kot 850 novih prikolic. Stalno je na voljo več kot 130 rabljenih prikolic. Neobvezni primer: nakup prikolice za transport strojev / nova prikolica. Multitransporter PKLx208cm, 3000 kg, z zavoro, tandem, visok, nizko podvozje, 10-palčna platišča iz lahke zlitine, nakladalna površina, ki se nagiba s pomočjo ročne hidravlike (dvostransko delujoča), aluminijaste stranske stene 35 cm, ki se zložijo tudi na sprednji strani, nakladalna vrata, ki segajo po celotni dolžini in so visoka 100 cm s pomočjo dvigala, DIN pritrdilni elementi, ki se iztegnejo v rob šasije, avtomatsko podpiralno kolo... Ni razstavni model! Naročila sprejemamo po telefonu v naslednjih časovnih intervalih: Rcodpfx Apszq Edyjhof od ponedeljka do petka v času našega delovnega časa ali kadar koli na naši spletni trgovini na trailershop.de 26. 7. Avtorske pravice – PKL LA Dortmund

Stanje: novo, Special offer! Stock vehicle from 2023! No initial registration! 9930301 Refrigerated trailer by Unsinn Fahrzeugtechnik with three roof rail tracks Manufacturer: Unsinn Model: KIK 3536-14-1750 with 3 rail tracks Internal dimensions: 3660 x 1750 x 2250 mm (LxWxH) Gross vehicle weight rating: 3500 kg Unladen weight: approx. 1545 kg Payload: approx. 1955 kg (payload figures may vary depending on equipment and construction) Loading height: 650 mm Color: Silver RAL 9006 3 roof rail tracks 200 mm high three-sided stainless steel scuff rail inside Additional locking bar on left rear door Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics Frame made of robust hollow section construction, welded and fully hot-dip galvanized by immersion AL-KO axles with self-adjusting brakes Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 4 crank-out stabilizer legs Thermo-sandwich construction Interior and exterior surfaces made of hot-dip galvanized and powder-coated steel sheet for heavy-duty use 60 mm PU-core insulation Insulated floor Double-wing rear door with robust stainless steel locking bar and aluminum hinges Stainless steel rear portal Cooling capacity 2,035 watts at a refrigerated compartment temperature of +0°C and an ambient temperature of 30°C Temperature control range from -2°C to +15°C Start-up current reduction for refrigeration units allows operation with 230 V generators instead of 400 V units Mains connection 230 V Evaporator air flow: 1,130 m³/hour Fully encapsulated unit with outdoor aluminum cover mounted on the front wall Eco-friendly CFC-free refrigerant Electronic cooling controller with defrost management Self-explanatory control display for easy and intuitive temperature setting The control display is lockable and thus protected against unauthorized operation Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Quality made in Germany Lighting with 13-pin connector and reversing light Manoeuvring handles at the front Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certification Spare wheel mounted on side or front wall Side lashing rail Rcodpey Nau Tsfx Aphjf Restraint bars for optimal load securing Custom interior fittings 230 V generator for independent power supply while driving Anti-theft protection

Stanje: novo, Refrigerated trailer from Unsinn Fahrzeugtechnik with transport refrigeration and side door Manufacturer: Unsinn Model: UKT 0C 4217-35-14 Internal dimensions: 4260 x 1750 x 1900 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,120 kg Payload: approx. 1,880 kg (Payload information may vary depending on equipment and configuration) Loading height: 660 mm Colour: white RAL 9001 Side door with external bar lock Swivelling crank supports at the rear and front 230 V power generator for independent power supply during transport Three-sided stainless steel rubbing rail inside External stainless steel bar lock on the left rear door Refrigerated compartment lock on right rear door Rear door clearance: 1,740 x 1,890 mm Insulated floor plate with non-slip plastic flooring (anti-slip class R 12), permanently elastic and wear-resistant Longitudinal chassis made of robust welded steel frame, hot-dip galvanized AL-KO axles with automatically adjusting brakes Reinforced automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg Thermo sandwich construction using insulated panels, inner and outer walls of hot-dip galvanized and powder-coated steel sheeting, engineered for heavy-duty use Wall and insulated floor thickness: 60 mm Aluminium edging profiles Stainless steel rear portal Cooling unit Arktik 2000P mounted on the front wall (top): cooling capacity 2,050 W at +10°C internal and 30°C ambient temperature Temperature control range from -20°C to +10°C -> Please note: The specified temperature control range from -20°C to +10°C applies solely to the installed refrigeration unit. Due to the wall thickness of a positive cooler, this trailer is designed as a zero-degree cooler and is not suitable for permanent deep-freeze use. Evaporator air flow: 1,130 m³/hour Rsdpjy I Rlyjfx Aphscf 230 V mains supply Intuitive control display for easy and user-friendly temperature settings Lockable control display protects against unauthorised access Digital temperature display for easy monitoring of the trailer temperature 230 V interior lighting High-quality workmanship - Quality Made in Germany Lighting system with 13-pin plug and reversing lights Front manoeuvring handles Marker lights Including vehicle documents Optional extras and accessories available for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel (mounted on side or front wall) Side lashing rail Cargo bars for optimal load securing Anti-theft device

Stanje: novo, Promotional trailer with 2 sales flaps, 1 flap can be raised and used as an advertising board, foldable rear stairs, and an additional side entrance door on the drawbar Special offer for stock vehicle from model year 2022, without first registration Manufacturer: Unsinn Model: PK 3036-10-2040 Promotion TW Internal dimensions: 3660 x 2040 x 2300 mm (L x W x H) Permissible total weight: 3000 kg Unladen weight: approx. 1040 kg Payload: approx. 1960 kg (payload may vary depending on equipment and configuration) Access door with entrance platform made of aluminium checker plate, located on the drawbar (door dimensions: 1800 x 750 mm H x W) Lockable, flush-mounted personnel door with rod locking system Sales flap with two gas struts, right in driving direction (dimensions: 3460 x 2200 mm L x H) with fixed edge Long-side sales flap, divided into two parts, lower part lifts vertically 90° and can be used as advertising space, each flap part height 1100 mm Rear sales flap with two gas struts (dimensions: 1840 x 2200 mm W x H) Opening angle of both sales flaps: 89° Removable corner tarp with keder rail between the two sales flaps 1 foldable rear staircase with aluminium handrail 4 swivel crank supports for safe positioning Hook bar for closing the sales flaps and crank for supports are mounted on the inside of the door Tyres: 195/55 R10 Aluminium rims Unique, torsion-resistant longitudinal beam chassis Welded hollow section frame, fully hot-dip galvanized Automatic jockey wheel, load capacity 500 kg Floor made of multi-bonded phenolic plywood, 18 mm, slip-resistant and waterproof Lighting with 13-pin plug and reversing lights Thermo-sandwich body Iso 40 Marker lights Two maneuvering handles on the front wall Incl. vehicle documents Possible additional options and accessories for this trailer: - Custom interior fittings - 230 V electrical installation with LED interior lighting, fuse box, and double socket - Shock absorbers incl. 100 km/h approval certificate - Lashing rails mounted on the side wall or floor Rcjdpfjy I R Ubjx Aphsf For individual and tailor-made financing solutions, please contact us! Another 1,500 trailers in stock at Trailer Center Rosemeier. Visit us and take a look. We are happy to advise you. Images may show optional accessories not included in standard delivery. Due to ongoing developments, images and technical data may vary slightly. Errors and changes excepted!

Stanje: novo, Special price! Stock vehicle from 2022! No initial registration! Refrigerated trailer from Unsinn Fahrzeugtechnik with two roof-mounted pipe rails Manufacturer: Unsinn Model: KIK 3530-14-1500 Internal dimensions: 3060 x 1500 x 2250 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: approx. 1230 kg Payload: approx. 2270 kg (payload may vary depending on equipment and configuration) Loading height: 650 mm Colour: Silver RAL 9006 2 roof-mounted pipe rails 3-sided stainless steel rubbing strip inside Rcodpfx Apjy Naf Sshef Stainless steel locking bar system on both rear doors Aluminium hinges Unique, torsion-resistant longitudinal chassis frame ensures safe driving characteristics Frame made of heavy-duty hollow section, welded and fully hot-dip galvanized by immersion ALKO axles with self-adjusting brakes Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 4 robust drop-down stabilizer legs Thermo sandwich construction Inner and outer skins made of hot-dip galvanized and powder-coated steel sheet for heavy-duty use Insulation 60 mm PU core Insulated floor with non-slip plastic covering Stainless steel rear frame Cooling capacity 2035 Watts at a cold room temperature of +0°C with an ambient temperature of 30°C Temperature control range from -2°C to +15°C 230 Volt mains connection Evaporator air flow 1130 m³/hour Fully encapsulated unit with aluminium outdoor cover mounted at the front Environmentally friendly, CFC-free refrigerant Electronic refrigeration control with defrost management Intuitive, self-explanatory control panel for easy and intuitive temperature adjustment Lockable control panel for protection against unauthorized use Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Quality Made in Germany Lighting with 13-pin socket and reversing light Front maneuvering handles Marker lights Including vehicle documentation Additional options and accessories available for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel (mounted laterally or at front bulkhead) Side lashing rail Cargo securing poles for optimal load restraint Custom interior fittings Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Box trailer with double-wing rear door and side door Manufacturer: Unsinn Model: UKU 301519-20-13 Door Internal dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2000 kg Unladen weight: approx. 520 kg Payload: approx. 1480 kg (Payload may vary depending on equipment and configuration) Loading height: approx. 530 mm Double-wing rear door with aluminium hinges Door retainers made of stainless steel Side door on the right-hand side (in direction of travel) Colour: white RAL 9016 Unique, torsion-resistant aluminium chassis for safe driving characteristics Walls made of lightweight panels, consisting of GRP-steel-sandwich in RAL 9016 Smooth GRP exterior walls for optimal signage/wrapping (Unique-Panel) Steel-reinforced interior walls for high impact resistance Loading area made of multi-bonded, phenolic resin-coated 18 mm anti-slip and waterproof plywood Load securing system with 8 movable lashing rings for optimal load safety Slatted lashing rail on side walls and front wall, height 900 mm Transparent roof for optimal natural lighting Rear frame and edge profiles made of special anodised aluminium sections Magnetic, swiveling LED interior light with motion sensor (can be positioned anywhere inside) Rcodpfx Aezb Sp Esphjf Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front marker lights Two maneuvering handles on the front wall ALKO coupling head with impact protection Vehicle documents included Available options and accessories for this trailer: Spare wheel Anti-theft device Load securing bar Shock absorbers incl. 100 km/h approval Drop-down support legs Custom interior fittings Registration of your new trailer at the licensing office

Stanje: novo, Promotional Trailer Special conditions for an in-stock vehicle from the 2022 production year without initial registration Manufacturer: Unsinn Model: PK 3048-13-2400 Internal dimensions: 4860 x 2400 x 2300 mm (L x W x H) Permissible total weight: 3.0 t Unladen weight: approx. 1,845 kg Payload: approx. 1,155 kg (payload values may vary depending on equipment and configuration) Exterior color: Silver RAL 9006 Sales flap with gas struts on the right in the direction of travel (4,000 x 2,200 mm W x H) Sales flap with gas struts at the rear (2,200 x 2,200 mm W x H) Both sales flaps equipped with robust, lockable bar locks Both sales flaps have tarpaulin skirts at the bottom for splash protection, allowing the flaps to be closed when the stage is deployed. Tarpaulin triangle between the sales flaps Hook rod for closing the sales flaps Folding advertising board with gas struts mounted on the roof (4,260 x 1,100 mm W x H) Folding stage with aluminium checker plate on the right in the direction of travel (3,940 x 1,000 mm L x D) Attachable rear stage (locking with tension latches) with aluminium checker plate (2,200 x 1,000 mm L x D) Attachable corner intermediate platform (locking with tension latches) with aluminium checker plate (1,150 x 1,150 mm L x D) Removable aluminium guardrail along the stage elements Folding staircase on the right in the direction of travel Front wall with rounded GRP extension Two intermediate wooden shelves with safety edge in the cargo space of the rounded front extension serve as additional storage (max. load: 50 kg) Two rows of recessed aluminium airline tracks mounted in the floor Two rows of LED light strips in the exhibition area One row each of LED light strips mounted centrally on the side and rear flaps Light switch and three double power outlets Distribution box including residual current device (RCD) and circuit breakers 3 m connection cable with CEE/Schuko plug Rcodjy I R Twjpfx Aphef Two flagpole holders mounted on the left in the direction of travel Two aluminium telescopic flagpoles 2.2 m – 6.0 m incl. 1.5 m outriggers Tires: 195/50 R 13 C Alloy wheels 4 robust screw jacks for secure and rapid leveling of the trailer Unique, torsion-resistant longitudinal beam chassis Hollow-profile construction, welded and fully hot-dip galvanized Automatic jockey wheel, load capacity 500 kg Loading platform made of multi-bonded phenolic plywood, 18 mm, non-slip and waterproof Lighting with 13-pin connector and reversing lights Thermo-sandwich superstructure Iso 40 Marker lights For individual equipment requests or bespoke interior fittings for this trailer, please contact us. Available options and accessories for this trailer: - Shock absorbers including 100 km/h approval certificate - Spare wheel including bracket - Anti-theft device - Registration of your new trailer at the vehicle licensing authority

Stanje: novo, Special offer! Stock vehicle from 2023! Never previously registered! 9931607 Unsinn refrigerated trailer as a high loader with side door and staircase Manufacturer: Unsinn Model: UKH 6C 3620 Internal dimensions: 3660 x 2040 x 1900 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,155 kg Payload: approx. 2,345 kg (Payload may vary depending on equipment and configuration) Loading height: approx. 780 mm Colour: Silver RAL 9006 Side door on the front right (in direction of travel), right-hand hinged with robust stainless steel T-bar lock (lockable) Double-leaf rear doors with cold store lever lock Hinges made of aluminium Door holders made of stainless steel Rear frame and edging made from anodised aluminium profiles Unique, torsion-resistant longitudinal chassis for excellent road handling Frame made from heavy-duty hollow section construction, fully welded and fully hot-dip galvanised Extendable staircase mounted at rear for comfortable access (825 mm wide, 4 steps) Heavy-duty jockey wheel for safe parking of the loaded trailer, load capacity: 900 kg 4 heavy-duty support legs for a stationary load of up to 6,000 kg Thermo-sandwich construction Inner and outer skins made of hot-dip galvanised and powder-coated steel sheet for high durability Rcedpoy Nacdofx Aphof Insulation with 40 mm PU-core 200 mm impact protection on three sides inside Refrigeration unit: Arktik 2000 N Refrigeration capacity: 2,050 W at a cold store temperature of +6°C and an ambient temperature of 30°C 230 Volt power connection Evaporator air flow: 750 m³/hour Fully encapsulated unit with outdoor housing mounted top front Environmentally friendly, CFC-free refrigerant Electronic auto-defrost for evaporator Lockable control display, protected against unauthorised use Electronic digital thermostat for optimal temperature regulation 220 Volt interior lighting High-quality workmanship – Quality made in Germany Floor made from multiply bonded phenolic plywood, 18 mm Lighting with 13-pin plug and reversing light Maneuvering handles at the front Including vehicle documents Optional extras and accessories for this trailer: Spare wheel incl. holder Side-mounted combination rail for optimal load securing Barrier rods for combination rail

Stanje: novo, Special offer! Stock vehicle from 2023! No initial registration! 9930179 Refrigerated trailer by Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKT 0C 4217 Internal dimensions: 4260 x 1750 x 1900 mm (L x W x H) Gross vehicle weight: 3000 kg Unladen weight: approx. 1120 kg Payload: approx. 1880 kg (Payload may vary depending on equipment and configuration) Loading height: 650 mm Colour: Silver RAL 9006 Stainless steel scuff rail on three sides inside Stainless steel rotary bar lock on both rear doors Aluminium hinges Unique, torsion-resistant longitudinal chassis for safe driving characteristics Rcodpfxey Naape Aphof Frame made from robust hollow-section construction, fully welded and hot-dip galvanized AL-KO axles with automatic brake adjustment Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 1 pair of swing-mounted screw supports Thermo-sandwich body Interior and exterior panels made from hot-dip galvanized and powder-coated steel plate for heavy-duty use Insulation: 60 mm PU core Insulated floor with non-slip plastic covering Stainless steel rear portal Cooling capacity: 2035 watts at a refrigerated compartment temperature of +0°C and an ambient temperature of 30°C Temperature control range from -2°C to +15°C Evaporator air throughput: 1130 m³/hour Mains connection: 230 volts Fully encapsulated unit with outdoor aluminium housing mounted on the drawbar at the front Environmentally friendly, CFC-free refrigerant Electronic cold storage controller with defrost management Self-explanatory operation display for easy and intuitive temperature setting The operation display is lockable and thus protected against unauthorized use Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Quality Made in Germany Lighting with 13-pin plug and reversing light Maneuvering handles at the front Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer at the road traffic authority

Stanje: novo, Three-way tipper with electric pump & mesh sides Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3000 kg Unladen weight: approx. 835 kg Payload: approx. 2165 kg (Payload specifications may vary depending on equipment and construction) Mesh attachment with integrated pendulum mounting in the corner stanchion, 4-sided, side-folding With the innovative hinge solution of the KombiLine, the attachments can be easily folded down in just a few steps. This makes loading and unloading the trailer particularly ergonomic, simple, and time-saving. Electrohydraulic pump with emergency function "Pumpless," enabling easy tipping with a cordless screwdriver when the battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and dirt-protected stored in the battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (to easily retrofit loading ramps) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous solid steel floor across the entire vehicle width Maintenance support for securing the tilted bed Reinforced automatic jockey wheel Maneuvering handle with practical strap roller for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing points mounted in the steel floor Lashing points on and under the loading area, each loadable up to 1500 kg and rotatable 360° Side panels fully foldable and removable Tailgate with steel cladding, foldable incl. slip protection for loading ramps Robust lever locks on the side panels 4 removable steel corner posts Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Side wall extension Loading ramps Support legs Load securing net Anti-theft device Rsdpfsy I Ha Tox Aphecf Registration of your new trailer with the road traffic authority

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,000 kg Unladen weight: approx. 835 kg Payload approx.: 2,165 kg (Payload specification may vary depending on equipment and configuration) Electrohydraulic pump with emergency hand pump, allows tipping via cordless screwdriver when battery is low Rcodpfxjy I Ezpe Aphsf Integrated battery charger with 230 V plug Battery and pump unit safely and dust-protected stowed in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps underneath the platform (for easy retrofit of ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor plate across the full vehicle width Maintenance support bar for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing points mounted in the steel floor Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Drop sides fully foldable and removable Rear drop side foldable, steel-plated, including run-off protection for loading ramps Robust toggle latches on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin plug and reverse light Including vehicle documents Possible options and accessories for this trailer: Mesh extension, steel extension, or side wall extension—choose your preferred version and customize your build Thanks to the clever KOMBILINE system, the extensions can easily be combined. For example, mesh extensions on the front and rear can be perfectly combined with steel or side wall extensions on the sides—no extra effort required Loading ramps Support stands Load securing net Anti-theft device Registration of your new trailer at the road traffic authority

Stanje: novo, Construction machine transporter UB with swiveling loading ramps and excavator arm support The universally applicable machine transporter by Unsinn, thanks to its high side walls, also allows for the transport of bulk materials. Rcsdpfxsy I I Dtj Aphjf Manufacturer: Unsinn Model: UB 3618-35-14 Internal dimensions: 3660 x 1800 x 300 mm (L x W x H) Permissible total weight: 3500 kg Empty weight: approx. 770 kg Payload: approx. 2730 kg (payload can vary depending on equipment and configuration) Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics Hollow profile construction, welded and fully hot-dip galvanized by immersion Body made from extremely robust steel side wall profiles Axles with self-adjusting brakes Walkable mudguards Excavator bucket support on the drawbar (not shown in pictures, but included in delivery) Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 10 robust lashing points on the sides, load capacity per lashing point 2000 kg 4 foldable and movable aluminium loading ramps with integrated ground supports, load capacity 3500 kg/pair The loading ramps allow for fast and easy loading of machines Compulsory support on the loading ramps Loading ramps can be swiveled to the side, ideal for loading e.g. pallet goods with a pallet fork or forklift Floor made of multi-bonded phenolic plywood, 18 mm, continuous without joints, non-slip and waterproof Lighting with 13-pin plug and reversing light Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Mounted aluminium toolbox Spare wheel incl. holder Anti-theft device Registration of your new trailer at the vehicle licensing authority

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 910 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.300 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm Rear Tipper with PUMPless" Rsdpfx Aeq Rvcqophocf Rear tipper by trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 is a single-axle high loader rear tipper. Easy loading thanks to its foldable and removable aluminium side panels. The load can be tipped by hand using the manual hydraulic system. A welded base frame gives this tipping trailer excellent stability. This car trailer features foldable and removable side panels, solid steel floor, PUMPless hydraulic system for use with cordless screwdrivers, jockey wheel, lashing eyes, welded hot-dip galvanized steel chassis, and a robust V-drawbar. Optional accessories available at extra cost: mesh extension, side wall extension, tarpaulin and frame, cover tarp, load securing net, and prop stands.

Stanje: novo, 9935373 Platform trailer with extendable drawbar Manufacturer: Unsinn Fahrzeugtechnik Model: ULM 4820-35-14 Gross vehicle weight: 3,500 kg Unladen weight: approx. 940 kg Payload: approx. 2,560 kg (payload figures may vary depending on equipment and construction) Dimensions: approx. 4,860 x 2,040 x 750 mm (L x W x H) Telescopic tubular drawbar adjustable without tools (free drawbar length 3,100 mm) 4 stake pockets 100 x 100 mm, installed flush with the loading platform Two plug-in stakes 90 x 90 mm (total length approx. 3,000 mm) with various lashing eyes for load securing Adjustable mounting support for the extendable tow bar Torsion-resistant longitudinal beam chassis for safe driving characteristics Robust hollow-section construction, welded and fully hot-dip galvanized by immersion Rodey I I D Hspfx Aphocf Reinforced jockey wheel for safe stationary support of the loaded trailer, load capacity 500 kg 8 folding, rattle-free lashing brackets recessed into the floor profile 8 additional lashing eyes under the loading area 8 foldable lashing bowls 8 lashing eyes under the load platform Internal long-action closures made of metal Removable side panels and corner stanchions Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Three-way tipper with E-pump & cordless screwdriver pump, loading ramps and support stands Manufacturer: Unsinn Rcedpfjy I Eu Nex Aphof Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency pump function 'Pumpless', allowing tipping via cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit are securely stored and protected from dirt in the battery compartment Aluminium loading ramps, 2560 x 300 mm, load capacity 2800 kg per pair Integrated ramp compartment with tensioning device and foldable license plate holder for storing the ramps under the loading platform Robust drop-down support legs Unique, torsion-resistant longitudinal chassis frame for improved driving stability and safety Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor running the full width of the vehicle Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Cargo securing system for increased flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing points on and under the loading floor, each rated up to 1500 kg and rotatable 360° Sidewalls fully foldable and removable Rear sidewall, steel-plated, foldable with anti-slip lock for loading ramps Robust cam lever locks on the sidewalls 4 removable steel corner posts Lighting system with 13-pin connector and reverse light Including vehicle documents Optional features and accessories for this trailer: - Sidewall extension - Mesh extension - Load securing net - Anti-theft device - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Special price! Stock vehicle from 2022! No initial registration! Refrigerated trailer from Unsinn Fahrzeugtechnik with two roof pipe rails – Quality made in Germany Rcsdpfxjy Nabme Aphjf Manufacturer: Unsinn Type: KIK 3036-14-1500 Internal dimensions: 3660 x 1500 x 2250 mm (L x W x H) Gross vehicle weight: 3,000 kg Unladen weight: approx. 1,285 kg Payload: approx. 1,715 kg (payload may vary depending on equipment and configuration) Loading height: approx. 650 mm Colour: Silver RAL 9006 2 roof pipe rails 3-sided stainless steel rubbing rail inside Lockable stainless steel bar lock on both rear doors Aluminium hinges Unique torsion-resistant longitudinal beam chassis for safe driving characteristics Frame constructed from robust hollow sections, fully welded and hot-dip galvanised in a dip bath ALKO axles with self-adjusting brakes Reinforced automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg 4 heavy-duty crank supports for a static load of up to 6,000 kg Thermo-sandwich construction Interior and exterior walls made of galvanised and powder-coated steel sheet for heavy-duty use 60 mm PU core insulation Insulated floor with non-slip plastic flooring Extra robust rear portal made of stainless steel Cooling capacity: 2,035 watts at a refrigerated compartment temperature of +0°C and an ambient temperature of 30°C Temperature control range from -2°C to +15°C 230V mains connection Air flow rate of evaporator: 1,130 m³/hour Completely encapsulated unit with outdoor aluminium cover, mounted at the front Environmentally friendly, CFC-free refrigerant Electronic cooling controller with defrost management Self-explanatory control display for easy and intuitive temperature setting Lockable control display for protection against unauthorised operation Digital temperature display for easy monitoring of trailer temperature 230 V interior lighting High-quality workmanship – Made in Germany Lighting with 13-pin connector and reversing light Maneuvering handles at the front Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers including 100 km/h certificate Spare wheel, mounted on the side or front wall Side lashing rails Load securing bars for optimal cargo security Anti-theft devices For individual and tailored financing options, please contact us! More than 1,500 trailers at the Anhänger-Centrum Rosemeier. Visit us and take a look. We are happy to advise you. Images may show accessories not included in the standard scope of delivery. Due to continuous development, images and technical data may differ slightly. Errors and changes excepted!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7500010, lastna masa: 450 kg, skupna masa: 1.400 kg, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.570 mm, višina nakladalnega prostora: 1.940 mm, velikost pnevmatike: 185/65 R14, barva: bela, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2025, Dimensions Gross weight: 1,400 kg Internal body dimensions: 3,050 × 1,570 × 1,940 mm Loading height: 530 mm Payload: 950 kg Tyres: 185/65 R14 Jockey wheel Reinforced automatic jockey wheel with a load capacity of 500 kg for safe parking of the trailer Body Walls made of proprietary, weight-optimised Unique Panels for significantly increased payload, consisting of GRP-steel sandwich construction in traffic white (RAL 9016) High-quality, smooth GRP exterior coating (seamless) with gelcoat sealing, suitable for custom signage and graphics Rcjdpfx Apexwanajhof —> Benefit of gelcoat sealing: exterior does not yellow and is UV-protected Interior cladding made of robust steel sheet for high impact resistance and stability Light roof for optimal daylight illumination of the interior Rear frame and edging profiles made of anodised aluminium profiles Double-wing rear doors with aluminium hinges, opening dimensions: 1,500 x 1,900 mm Lockable stainless steel cam lock and door retainer 2 manoeuvring handles mounted on the front wall profile Load securing Lashing system with adjustable lashing rings in the floor profile for flexible cargo securing 8 lashing rings, each with a load capacity up to 300 daN (kg) Lashing rail for straps and locking bars mounted on the side walls and front wall at a height of 900 mm

Stanje: novo, 9930448 Construction Machinery Transporter UB with Swiveling Loading Ramps The universally applicable machine transporter from Unsinn, thanks to its high sidewalls, also enables the transport of bulk materials. Manufacturer: Unsinn Model: UB 3618-35-14 Internal dimensions: 3660 x 1800 x 300 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: approx. 770 kg Payload: approx. 2730 kg (payload figures may vary depending on equipment and design) Unique, torsion-resistant longitudinal beam chassis for optimum driving characteristics Welded hollow profile construction, fully hot-dip galvanized Body made from extremely robust steel sidewall profiles Axles with self-adjusting brakes Walk-on mudguards Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 10 sturdy lashing points on the sides, load capacity per lashing point 2000 kg 4 fold-down, adjustable aluminum ramps with integrated ground support, load capacity 3500 kg/pair The loading ramps allow for quick and easy loading of machinery Compulsory support on the loading ramps Ramps can be swiveled to the side for optimal loading of, for example, palletized goods using a pallet fork or forklift Floor made of multiple-bonded phenolic plywood, 18 mm, seamless, anti-slip, and waterproof Lighting with 13-pin connector and reverse light Marker lights Vehicle documents included Possible additional options and accessories for this trailer: Rodpfxoy I Tu Ro Aphscf Excavator bucket holder on the drawbar Mounted aluminum toolbox Spare wheel including holder For individual and tailor-made financing options, simply contact us! A further 1,500 trailers available at the Rosemeier Trailer Centre. Come and visit us. We are happy to advise you. Images may show accessories not included in standard delivery. Due to continuous improvement, images and technical data may vary slightly. Subject to errors and changes!

Stanje: novo, Special price! Stock vehicle from 2023! No prior registration! 9931385 Refrigerated Trailer – Tandem Axle Manufacturer: Unsinn Model: UKT 6C 3015-26-14 Dimensions: 3000 x 1500 x 1900 mm (L x W x H) Gross vehicle weight: 2600 kg Unladen weight: approx. 775 kg Payload: approx. 1825 kg (payload may vary depending on configuration and construction) Unique, torsion-resistant aluminium chassis 4 robust telescopic crank supports for up to 6000 kg static load capacity Thermo-sandwich body construction Inner and outer panels made of hot-dip galvanized and powder-coated steel sheet for high durability Insulation: 40 mm PU core Exterior colour: Silver RAL 9006 Double-wing rear doors with aluminium hinges Refrigerated compartment lever latch Rear frame and edging profiles made of anodized special aluminium sections for an attractive design Loading area made of multi-bonded, durable 18 mm thick phenolic resin-coated plywood 200 mm high impact protection on three sides at the bottom Cooling unit: Arktik 1600 N Cooling capacity: 1600 watts at compartment temperature of +6°C and ambient temperature of 30°C Temperature control range from +2°C to +10°C Power supply: 230 Volt 50 Hz Evaporator air flow rate: 750 m³/hour Fully enclosed unit, outdoor housing mounted at the front, top Environmentally friendly, CFC-free refrigerant Electronic automatic evaporator defrost Lockable control display Reinforced jockey wheel Electronic digital thermostat for optimal temperature regulation Interior lighting Lighting with 13-pin plug Reversing lights Available options and accessories for this trailer: Shock absorbers including 100 km/h type approval Rjdpfx Asy I Epmephscf Spare wheel including holder Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, lastna masa: 235 kg, največja dovoljena obremenitev: 515 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 150 mm, prostornina tovornega prostora: 0,8 m³, barva: črn, gradbena višina: 780 mm, delovna širina: 2.050 mm, Hydraulics, reverse automatic function, hot-dip galvanization, unbraked, tilting loading platform / 750 kg axle, * IMMEDIATELY AVAILABLE * incl. tilting loading platform / 750 kg axle Technical Data: - Type: New vehicle - TÜV: New/3 years - Availability: IMMEDIATE! - Permissible total weight: 750kg - Unladen weight: 235 kg - Payload: 515 kg - Internal dimensions: 260 x 155 x 15 cm (L x W x H) - Overall external dimensions: 403 x 205 x 78 cm (L x W x H) - Loading height: 31 cm - Tyres: 175/70R13 steel rim - Brakes: No - Jockey wheel: yes, automatic - 100km/h approval: yes - incl. registration documents Body Construction: - Floor: 18mm multiplex plywood - Side walls: tubular steel, powder-coated black - Side wall height: 15cm - Chassis: Lowered, tiltable, AL-KO rubber spring axle - Tipping function: tiltable - Hydraulics: none - Ramp angle: approx. 13° - Wheel chocks: none - Brake system: - - Frame/chassis: welded, hot-dip galvanized steel frame - Lash rings: 8 foldable - Winch: available as extra - Supports: rear support - Ramps: with folding tail ramp - Lighting plug: 13-pin - Registration: ZBII & COC documents Standard Equipment: - 3-sided body made of robust steel profile, galvanized and powder-coated in black-grey (RAL 7021) - Full-width loading ramp allows driving up across the entire loading area - Fitting sockets in all corners for e.g. tarpaulin frame - Folding license plate holder - Heavy-duty plastic mudguards - 8 foldable lashing eyes in the side wall profile - 1 lashing eye in the front wall profile - 1 lashing ring centrally on the rear loading area - Reinforced, automatic jockey wheel for secure parking of loaded trailer - Multi-laminated phenolic plywood floor, 18 mm, seamless, anti-slip and waterproof - Ramp angle in tilted position approx. 13° (model AS 826) - Rear number plate holder, swing-away for loading - Reverse automatic function - 13-pin plug - Reverse lights - Large-dimensioned safety lights - Integrated rear fog lamp - Recessed lighting in rear frame - Central automatic jockey wheel - Registration documents: ZBII and COC Optional accessories – available on request: Rjdpfx Aju Htpdephjcf - 100km/h approval with shock absorbers - Anti-theft device - Spare wheel - Storage box - High tarpaulin - Additional lashing eyes - Reverse lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer suitable financing! Descriptions and images are copyright protected! Over 800 trailers available immediately! We have been a specialist dealer and service workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix – repair and delivery throughout Germany available at extra cost! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, mistakes, and prior sale excepted.

Stanje: novo, lastna masa: 630 kg, največja dovoljena obremenitev: 1.970 kg, skupna masa: 2.600 kg, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 165r13, Product information: "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Mesh Side Three-Way Tipper" Three-way tipper with mesh sides from trailer manufacturer UNSINN, model WEB-DK3017-26-13-E. Made in Germany! This high-loader three-way tipper is equipped with electric-hydraulic tipping. The foldable and removable side panels make loading the trailer from the side or rear easy – whether by forklift, wheel loader or by hand. A welded, immersion hot-dip galvanized steel frame provides outstanding strength and durability for the tipper. Standard equipment includes: mesh side extensions, foldable and removable side panels, solid steel floor, electro-hydraulics, automatic jockey wheel, lashing rings, welded hot-dip galvanized frame, ramp compartment, and a robust V-drawbar. Optional accessories available (at extra cost): side wall extensions, tarpaulin and frame, flat cover, net, storage box, loading ramps and support stands. ----- We also offer: Rjdpfx Apsg Un Dzshocf · Financing · Leasing (for commercial customers only) · Consulting · Nationwide delivery within Germany (excluding islands) · Accessories · Trailer rental · Spare parts · Registration service for DH – HB – DEL · Servicing · Repairs · TÜV inspection for car trailers Car Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday – Friday 8.00 am – 5.00 pm

Stanje: novo, Special price! In-stock vehicle from 2023! No initial registration! 9931399 Rcsdpjy Naa Njfx Aphof Refrigerated Trailer Manufacturer: Unsinn Model: UKT 6C 3417 Door Internal dimensions: 3400 x 1750 x 1900 mm (L x W x H) Gross vehicle weight: 2600 kg Unladen weight: approx. 940 kg Payload: approx. 1660 kg (payload figures may vary depending on equipment and configuration) Loading height: 560 mm Colour: silver grey Side door on the right in the direction of travel Unique, torsion-resistant aluminium chassis for safe driving characteristics With self-adjusting brake Reinforced automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 4 sturdy telescopic crank supports for up to 6000 kg static load Thermo-sandwich construction Interior and exterior cladding made of hot-dip galvanized and powder-coated steel sheet for robust use Insulation: 40 mm PU core Exterior colour: silver RAL 9006 Double-leaf rear door with aluminium hinges Refrigerated compartment lever lock and stainless steel door retainer Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance 200 mm impact protection running around three sides at the bottom Arktik 1600 N Cooling capacity: 1600 watts at an internal temperature of +6°C and ambient temperature of 30°C Temperature control range from +2°C to +10°C Mains connection: 230 Volt 50Hz Evaporator air flow: 750 m³/hour Fully encapsulated unit with outdoor casing mounted at the front at the top Environmentally friendly CFC-free refrigerant Electronic automatic defrost for evaporator Control display is lockable to prevent unauthorized operation Electronic digital thermostat for optimal temperature control 220 Volt internal lighting High-quality workmanship - Quality Made in Germany Made of multiply bonded screen printing panel, 18 mm Lighting with 13-pin plug and reversing light Manoeuvring handles at the front Door retainers Incl. vehicle documents Available additional options and accessories for this trailer: Spare wheel including holder Combination rail on the side for optimal cargo securing Retaining bars for combination rail

Stanje: novo, Three-way tipper with electric pump & cordless drill pump Manufacturer: Unsinn Rcsdpfx Asy I E Ezjphef Model: UDK 3620-35-14 Dimensions: 3660 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 1065 kg Payload: approx. 2435 kg (payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency manual pump function, allowing easy tipping with a cordless drill in case of weak battery Integrated battery charger with 230 V plug Battery and pump unit safely stowed and protected from dirt in the battery box Integrated ramp compartment with tensioning system and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous massive steel floor across the entire vehicle width Maintenance support for securing the raised body Reinforced automatic jockey wheel Maneuvering handle with practical strap winder for ease of use Load securing system for greater flexibility and efficiency in load restraint, DEKRA certified 14 recessed lashing points mounted in the steel floor Lashing points on and below the loading platform, each rated up to 1500 kg and 360° rotatable Dropsides fully foldable and removable Tailgate with steel cladding, foldable, including slip guard for loading ramps Robust toggle latches on the sideboards 4 removable steel corner stanchions Lighting with 13-pin plug and reversing spotlight Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or dropside extension—choose the variant that suits your needs and customize your structure accordingly. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension on the front and rear can be perfectly combined with either a steel or standard dropside extension on the sides—no extra effort required. Loading ramps Cargo securing net Anti-theft device Registration of your new trailer with the local road traffic authority