Unsinn Prekucnik nakup rabljenega (148)

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3017-30-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,000 kg Unladen weight: approx. 835 kg Payload approx.: 2,165 kg (Payload specification may vary depending on equipment and configuration) Electrohydraulic pump with emergency hand pump, allows tipping via cordless screwdriver when battery is low Integrated battery charger with 230 V plug Battery and pump unit safely and dust-protected stowed in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps underneath the platform (for easy retrofit of ramps) Fsdey I Ezpopfx Al Hopg Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor plate across the full vehicle width Maintenance support bar for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing points mounted in the steel floor Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Drop sides fully foldable and removable Rear drop side foldable, steel-plated, including run-off protection for loading ramps Robust toggle latches on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin plug and reverse light Including vehicle documents Possible options and accessories for this trailer: Mesh extension, steel extension, or side wall extension—choose your preferred version and customize your build Thanks to the clever KOMBILINE system, the extensions can easily be combined. For example, mesh extensions on the front and rear can be perfectly combined with steel or side wall extensions on the sides—no extra effort required Loading ramps Support stands Load securing net Anti-theft device Registration of your new trailer at the road traffic authority

Stanje: novo, Three-way tipper with electric pump Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) Electro-hydraulic pump with emergency manual pump – enables tipping with a cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit safely and dirt-protected stored in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Massive steel floor running over the entire width of the trailer Maintenance support for securing the tilted body Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap dispenser for easy handling Load securing system for more flexibility and efficiency in load securing, DEKRA certified 14 recessed lashing rings mounted in the steel floor Lashing rings on and under the platform, each loadable up to 1500 kg and rotatable 360° Sidewalls can be fully folded down and removed Tailgate with fold-down steel covering including anti-slip protection for loading ramps Robust lever locks on the sidewalls 4 plug-in corner stanchions made of steel Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Whether mesh attachment, steel extension or sideboard extension – choose the suitable variant and customize your superstructure individually. Thanks to the ingenious KOMBILINE system, extensions can be combined easily with each other. For example, a mesh attachment at the front and rear can be perfectly combined with a steel or sideboard attachment at the sides without additional effort. Loading ramps Support legs Load securing net Anti-theft device Fsdpfx Aljy I Ezio Hepg Registration of your new trailer at the local vehicle registration office

Stanje: novo, Three-way tipper with electric pump, cordless drill pump & mesh extension Manufacturer: Unsinn Model: UDK 3617-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 985 kg Payload approx.: 2,515 kg (payload specifications may vary depending on equipment and design) Mesh extension with integrated pendulum mounting in the corner stanchions, foldable on all four sides With the innovative hinge solution of the KombiLine, the superstructures can be folded down easily in just a few steps. This makes loading and unloading the trailer especially ergonomic, straightforward and time-saving. Electrohydraulic pump with emergency pump function "Pumpless" for easy tipping using a cordless screwdriver in case of low battery power Integrated battery charger with 230 V plug Battery and pump unit securely and dirt-protected stored in battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (ramps can be easily retrofitted) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Fully welded and hot-dip galvanized steel frame profile Fsdoy I Ezcjpfx Al Hopg Massive steel bed running the full width of the vehicle Maintenance support to secure the raised platform Reinforced automatic support wheel Shunting handle with practical strap winder for easy handling Load securing system for more flexibility and efficiency, DEKRA certified 14 recessed lashing points in the steel bed Lashing points above and below the platform, loadable up to 1,500 kg each and 360° rotatable Side panels fully foldable and removable Rear panel with fold-down steel plating, including anti-slip protection for loading ramps Robust cam lock fasteners on the side panels 4 plug-in steel corner stanchions Lighting with 13-pin connector and reversing light Including registration documents Available options and accessories for this trailer: Side wall extension Loading ramps Support legs Load securing net Anti-theft protection Registration of your new trailer at the vehicle registration office

Stanje: novo, Three-way tipper with E-pump & cordless screwdriver pump, loading ramps and support stands Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency pump function 'Pumpless', allowing tipping via cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit are securely stored and protected from dirt in the battery compartment Aluminium loading ramps, 2560 x 300 mm, load capacity 2800 kg per pair Integrated ramp compartment with tensioning device and foldable license plate holder for storing the ramps under the loading platform Robust drop-down support legs Unique, torsion-resistant longitudinal chassis frame for improved driving stability and safety Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor running the full width of the vehicle Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Cargo securing system for increased flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing points on and under the loading floor, each rated up to 1500 kg and rotatable 360° Sidewalls fully foldable and removable Rear sidewall, steel-plated, foldable with anti-slip lock for loading ramps Robust cam lever locks on the sidewalls 4 removable steel corner posts Lighting system with 13-pin connector and reverse light Including vehicle documents Optional features and accessories for this trailer: - Sidewall extension Fodpfsy I Eu Njx Al Hepg - Mesh extension - Load securing net - Anti-theft device - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Special price! Stock vehicle from 2022! No initial registration! 9929942 Box trailer with double-wing rear door and sales flap Manufacturer: Unsinn Model: ULK 2636-14-1750 Internal dimensions: 3660 x 1750 x 1940 mm (LxWxH) Gross vehicle weight: 2600 kg Unladen weight: approx. 640 kg Payload: approx. 1960 kg (actual payload may vary depending on configuration and construction) Loading height: 550 mm Colour: white Sales flap on the right in the direction of travel 2 gas springs and wind support Walls made from lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls ideal for signage/wrapping Steel-reinforced interior walls ensure high impact resistance Double-wing rear door with high-quality aluminium hinges Robust stainless steel rotary bar lock (lockable) on rear doors Fpjdjy I Eptepfx Al Hjg Stainless steel door retainers Load floor made from 18 mm multi-bonded phenolic resin plywood, slip-resistant and waterproof Lashing system with 8 moveable lashing rings for optimal load securing Lashing rail on the side and front walls, 900 mm height Transparent roof for high light transmission Rear frame and edging profiles made from special anodised aluminium profiles Magnetic, swivelling LED interior light with motion detector (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front position lights Two manoeuvring handles on the front wall AL-KO coupling head with impact protection Including vehicle documents Options and accessories available for this trailer: - Shock absorbers incl. 100 km/h certificate - Spare wheel incl. bracket - Anti-theft device - Prop stands - Custom interior fitting - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Special price! Stock vehicle from 2023! No prior registration! 9931385 Refrigerated Trailer – Tandem Axle Manufacturer: Unsinn Model: UKT 6C 3015-26-14 Dimensions: 3000 x 1500 x 1900 mm (L x W x H) Gross vehicle weight: 2600 kg Unladen weight: approx. 775 kg Payload: approx. 1825 kg (payload may vary depending on configuration and construction) Unique, torsion-resistant aluminium chassis 4 robust telescopic crank supports for up to 6000 kg static load capacity Thermo-sandwich body construction Inner and outer panels made of hot-dip galvanized and powder-coated steel sheet for high durability Insulation: 40 mm PU core Exterior colour: Silver RAL 9006 Double-wing rear doors with aluminium hinges Refrigerated compartment lever latch Rear frame and edging profiles made of anodized special aluminium sections for an attractive design Loading area made of multi-bonded, durable 18 mm thick phenolic resin-coated plywood Fodpey I Epmsfx Al Hjpg 200 mm high impact protection on three sides at the bottom Cooling unit: Arktik 1600 N Cooling capacity: 1600 watts at compartment temperature of +6°C and ambient temperature of 30°C Temperature control range from +2°C to +10°C Power supply: 230 Volt 50 Hz Evaporator air flow rate: 750 m³/hour Fully enclosed unit, outdoor housing mounted at the front, top Environmentally friendly, CFC-free refrigerant Electronic automatic evaporator defrost Lockable control display Reinforced jockey wheel Electronic digital thermostat for optimal temperature regulation Interior lighting Lighting with 13-pin plug Reversing lights Available options and accessories for this trailer: Shock absorbers including 100 km/h type approval Spare wheel including holder Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Motorcycle Trailer Manufacturer: Unsinn Model: UA 3718-18-13 Internal dimensions: 3750 x 1800 x 150 mm (LxWxH) Gross vehicle weight: 1,800 kg Payload: approx. 1,300 kg (payload may vary depending on equipment and configuration) Unladen weight: approx. 500 kg Loading height: 460 mm Unique, torsion-resistant longitudinal beam chassis for stable handling, fully hot-dip galvanized Superstructure: 3 sides made of robust steel profile Continuous loading ramp allows access across the entire width of the loading area Certified for 100 km/h operation With self-adjusting brakes Continuous loading ramp allows access across the entire width of the platform Folding license plate holder installed Robust plastic mudguards fitted Secure and quick lashing all around the outer frame 1 lashing ring on the loading area, centered at the rear Reinforced, automatic jockey wheel for safe parking of the loaded trailer Floor made from 18 mm multiple-bonded phenolic plywood, seamless, anti-slip and waterproof Fsdpfxjy I Eiyo Al Hopg Loading angle when ramp is lowered: approx. 5° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering device and safety lock (only on braked version) Incl. vehicle documents Available options and accessories for this trailer: - Motorcycle stand - Removable aluminum side extension, 400 mm - High canvas cover, 1500 and 1700 mm in various colors - Winch stand without cable winch - Hand cable winch, 900 kg - Spare wheel bracket for AS series with mounting kit - Spare wheel 175/70 R13 - Electro-hydraulics mounted in container, with battery and charger, without emergency hand pump - Foldable lashing rings - Motorcycle tie-down straps * Registration of your new trailer at the local vehicle registration authority

Stanje: novo, Box trailer as high loader Manufacturer: Unsinn Model: UKH 5424-30-13 Internal dimensions: 5460 x 2400 x 2100 mm (LxWxH) Fedpfsy I Egfex Al Hjpg Gross vehicle weight: 3000 kg Unladen weight: approx. 1220 kg Payload: approx. 1780 kg (payload may vary depending on configuration and design) Exterior color: silver RAL 9006 Unique, torsion-resistant longitudinal beam chassis made from a robust steel frame for safe driving characteristics, fully hot-dip galvanized Walls made from insulated thermo-panels, steel sandwich construction Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Interior and exterior sheeting made from galvanized and powder-coated steel sheet for heavy-duty use 45 mm PU core insulation Double-wing rear door with aluminum hinges Stainless steel rod lock Additional rod lock on the left rear door Stainless steel door holder Load area made from multi-glued phenolic plywood, 18 mm, anti-slip, waterproof Extra interior height: 2100 mm Aluminum edging profiles for a stylish appearance 2 maneuvering handles mounted on the front wall profile Including vehicle documents Possible additional options and accessories for this trailer: Custom interior fittings Anti-theft device

Stanje: rabljeno, Young used trailers from our large rental fleet! Unsinn box trailer with thermo-sandwich construction Manufacturer: Unsinn Model: KK 3048-14-1750 Internal dimensions: 4860 x 1750 x 2100 mm (L x W x H) Fpsdpoy I Efuefx Al Heg Gross vehicle weight: 3000 kg Unladen weight: approx. 1005 kg Payload: 1995 kg (payload may vary depending on equipment and configuration) Thermo-sandwich construction Inner and outer panels made of hot-dip galvanized and powder-coated steel Insulation: 40 mm PU core Exterior colour: silver RAL 9006 Plywood double wing rear door with robust aluminium hinges Door holder Stainless steel lockable rod latch Rear frame and edging profiles made from special aluminium profiles Load floor made of multi-glued phenolic plywood, 18 mm, slip-resistant surface 10 recessed tie-down points in the floor (4 per side) Torsion-resistant, stable longitudinal beam chassis for high point loads and safe driving characteristics Frame fully welded and hot-dip galvanized by immersion Reinforced automatic support wheel, load capacity 500 kg 13-pin plug Reversing lights Marker lights 2 maneuvering handles AL-KO coupling head with collision protection First registration: 13.03.2026 Workshop-inspected New technical inspection (TÜV) available on request Possible additional options and accessories for this trailer: - Spare wheel - Load securing bars for optimum load safety - Shock absorbers including 100 km/h certificate - Interior lighting - Lashing rings in the floor * Also available with rear ramp and/or side door

Stanje: rabljeno, Rabljeni spustni prevoznik za stroje Fsdpfey I Eafsx Al Hepg Proizvajalec: Unsinn Tip: AS 826-13-1550 Mere: 2600 x 1550 x 150 mm d.š.v. Dovoljena skupna masa: 750 kg Višina nakladanja: 310 mm Vezalna točka na nakladalni površini zadaj na sredini Ojačano samodejno podporno kolo Nagib rampe v spuščenem stanju cca 13° Razsvetljava s 13-polnim vtičem in vzvratno lučjo Datum prve registracije: 26.04.2016 Servisno pregledan Na željo z novim TÜV

Stanje: novo, Special offer! Stock trailer from 2023! No initial registration! Fjdpfx Ajy I D N Sjl Hjpg 9931235 Box trailer with double-wing rear door and sales flap Manufacturer: Unsinn Model: UKU 421719-26-14 VKL Internal dimensions: 4260 x 1750 x 1940 mm (L x W x H) Permissible total weight: 2600 kg Unladen weight: approx. 640 kg Payload: 1960 kg (payload figures may vary depending on equipment and design) Loading height: approx. 550 mm Colour: white Sales flap on the right in the direction of travel Unique Panel walls made of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal signage/wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Double-wing rear door with high-quality aluminium hinges Robust stainless steel rotary bolt lock (lockable) on rear doors Stainless steel door retainers Loading area made of multi-bonded 18 mm phenolic plywood, anti-slip and waterproof Lashing system with 8 movable lashing rings for optimal load securing Slat lashing rail on the sidewalls and front wall, height 900 mm Transparent light roof with high light transmission Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light incl. motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front position lamps Two manoeuvring handles on the front wall AL-KO coupling head with collision protection Incl. vehicle documents Possible options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Rear-mounted support legs Custom interior fittings Spare wheel incl. holder Anti-theft device Registration service for your new trailer at the road traffic office

Stanje: novo, Box trailer with ramp and sales flap Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: approx. 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2,000 kg Unladen weight: approx. 575 kg Payload: approx. 1,425 kg (Payload may vary depending on equipment and configuration) Smooth GRP exterior panels for optimal signage/wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Rear ramp Robust stainless steel bar lock (lockable) on the ramp Stainless steel door retainers Side sales flap on the right (in the direction of travel), equipped with a robust, lockable stainless steel bar lock Side flap dimensions: approx. 2500 x 1440 mm (L x H) Loading floor made of 18 mm multi-glued screen printing plate, slip-resistant and waterproof Lashing system with 8 movable lashing rings for optimal cargo securing Lashing rail on side and front walls, height 900 mm Transparent roof for high light transmission Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light with motion sensor (positionable anywhere inside the interior) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reverse light Front marker lights Two manoeuvring handles on the front wall ALKO coupling head with collision protection Includes vehicle documents Optional equipment and accessories for this trailer: Shock absorbers including 100 km/h approval Fpedpfxjy I D N Eo Al Hsg Spare wheel including holder Stanchion supports Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading Area Dimensions: 3660 x 1750 x 1200 mm (L.W.H.) Gross Vehicle Weight Rating: 3500 kg Unladen Weight: 1245 kg Payload: 2255 kg (payload specifications can vary depending on equipment and construction) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers as a prerequisite for 100 km/h approval Steel floor across the entire width made from a single, bent piece Patented load securing system with 14 lashing pins on and under the loading area Each pin rated at 1500 daN (kg), 360° rotatable Side panels fixed on three sides Rear drop gate Removable aluminium partition for flexible compartmentalisation at various positions Sturdy folding rear support legs ensure stable positioning even when detached Electric pump Manual emergency pump, pumpless system Additional hydraulic connection for towing vehicle 2 rear work lights Lighting system with 13-pin plug Reversing lights 2 plastic toolboxes, splash-water protected, mounted left and right under the loading area Fodey I D Nxspfx Al Hspg Flat tarp for protection of dried firewood in bad weather, including storage compartment on the front board Vehicle documents included Available options and accessories for this trailer: 100 km/h approval certificate Spare wheel including holder Anti-theft device Drawbar cover Registration of your new trailer with the local road traffic office

Stanje: rabljeno, Young used trailers from our large rental fleet! 9934822 Used turntable trailer by Unsinn Fahrzeugtechnik as a 3-axle version Manufacturer: Unsinn Model: UD-3 6022-35-13 Platform dimensions: approx. 6060 x 2200 x 350 mm (LxWxH) Gross vehicle weight: 3,500 kg Unladen weight: 1,060 kg Payload: 2,440 kg (payload specification may vary depending on equipment and configuration) Low loading height thanks to 195/50 R13 C tyres 3-axle chassis ensures exceptional running smoothness Unique, torsion-resistant longitudinal beam chassis for optimal driving stability Fpsdpfoy I Dy Rjx Al Heg Welded hollow profile structure, fully hot-dip galvanised by immersion 8 robust lashing recesses integrated in the frame (4 per side) 10 additional lashing eyes under the platform Sideboards and corner stanchions removable without tools 13-pin connector Flush-mounted, long-stroke metal locks Marker lights Platform made of multiple-bonded, anti-slip phenolic plywood, 18 mm thick First registration: 27/11/2025 Workshop inspected TÜV renewal available upon request Possible additional options and accessories for this trailer: - Spare wheel mounted - Load securing net including net hooks mounted on sideboards - Underrun ramps (stowable)

Stanje: novo, Three-way tipper with electric pump & cordless screwdriver pump and side wall extension Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 1100 mm (L x W x H) Loading height: approx. 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload approx.: 2595 kg (payload may vary depending on equipment and configuration) With the innovative hinge system of the KombiLine, the extensions can be conveniently folded down in just a few quick steps, making loading and unloading the trailer especially ergonomic, easy, and time-saving. Electrohydraulic pump with backup manual pump for easy tipping using a cordless screwdriver in case of low battery. Integrated battery charger with 230 V plug. Battery and pump unit are securely stored in the battery box, protected from dirt. Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the loading platform (for easy retrofitting of loading ramps). Maintenance support strut for securing the tilted platform during maintenance work. Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability. Closed, fully welded and hot-dip galvanised steel frame profile. Continuous solid steel floor across the entire vehicle width. Fpodpfx Aley I Dyds Heg Reinforced automatic jockey wheel. Maneuvering handle with practical ratchet strap reel for easy handling. Load securing system for increased flexibility and efficiency in load securing, DEKRA certified. 10 recessed lashing pins fitted in the steel floor. Lashing pins above and below the loading platform, each with a load capacity of up to 1500 kg and 360° rotatable. Side walls completely foldable and removable. Tailgate with foldable steel plank including anti-slip protection for loading ramps. Robust cam lever locks on the side walls. 4 removable steel corner stanchions. Lighting with 13-pin connector and reversing light. Incl. vehicle documents. Available options and accessories for this trailer: Aluminium loading ramps Load securing net Supports Anti-theft device Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Special offer! In-stock vehicle from 2024! Never registered! 9933125 Box trailer with double rear doors and side door on the right in the direction of travel Manufacturer: Unsinn Model: ULK 2642-14-1750 Internal dimensions: 4260 x 1750 x 1940 mm (LxWxH) Permissible gross weight: 2600 kg Unladen weight: approx. 640 kg Fedpfx Asy I Dxtel Hepg Payload: approx. 1960 kg (payload figures may vary depending on equipment and configuration) Loading height: 550 mm Colour: white Side panels made from lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal trailer signage/foil wrapping Steel-reinforced interior walls ensure high impact resistance Double rear doors fitted with high-quality aluminium hinges Robust stainless steel bar lock (lockable) on rear doors Stainless steel door retainers Loading floor made of multi-bonded 18 mm phenolic resin-coated plywood, anti-slip and waterproof Cargo securing system with 8 movable lashing rings for optimal load securing Slatted lashing rails fitted to the side and front walls at 900 mm height Translucent roof with high light transmission Rear frame and edging profiles made from special anodised aluminium sections Magnetic, swiveling LED interior light incl. motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front marker lights Two maneuvering handles on the front wall ALKO coupling head with impact guard Including registration documents Optional equipment and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Side supports Custom interior fittings Registration of your new trailer at the vehicle registration office

Stanje: novo, Rear tipper with electric pump & cordless screwdriver pump Manufacturer: Unsinn Model: WEB HK 2715-26-13 Dimensions: 2760 x 1500 x 300 mm (L x W x H) Permissible total weight: 2,600 kg Unladen weight: approx. 555 kg Fodpjy I Du Uefx Al Hopg Payload: approx. 2,005 kg (payload may vary depending on equipment and configuration) Hydraulic unit "Pumpless" incl. socket adapter for convenient and easy tipping using a cordless screwdriver Integrated battery charger with 230V plug Battery and pump unit safely stowed and protected from dirt inside the battery box Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting) Unique, torsion-resistant longitudinal chassis for safe driving characteristics and high stability Fully welded, hot-dip galvanized, closed steel frame profile Continuous, heavy-duty steel floor covering the full vehicle width Maintenance support, securing the tipper body when tilted Reinforced automatic jockey wheel Shunting handle with handy strap reel for easy handling Load securing system for greater flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings mounted above and below the platform, each rated to 1,000kg and 360° rotatable Side panels fully foldable and removable Tailboard with steel sheeting, fold-down, including anti-slip protection for loading ramps Robust cam locks on the side panels 4 plug-in steel corner posts Lighting with 13-pin connector and reversing light Incl. vehicle documentation Available options and accessories for this trailer: Whether mesh extension, steel extension, or drop side extension – select your preferred option and customize your build. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, use mesh extensions at the front and rear together with steel or drop side extensions at the sides – no additional effort required. Shock absorbers incl. 100 km/h approval Anti-theft device Drawbar cover Cargo securing net Registration of your new trailer at the road traffic authority

Stanje: novo, največja dovoljena obremenitev: 2.610 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, Special Offer! Unsinn GTAS 3536-14-1750 Electric MACHINE TRANSPORT TRAILER Technical Specifications: * Trailer Type: Lowering Trailer Unsinn GTAS 3536-14-1750 Electric * Gross Vehicle Weight: 3,500 kg * Payload Capacity: 2,610 kg * Internal Dimensions: L: 366 cm, W: 175 cm, H: 35 cm * Floor: Multiplex wooden floor * Lashing Points: 4 per side * Side Walls: Steel Fpedoylf T Eopfx Al Hjg * Frame: Steel frame * Electrical System: 13-pin, 12V * Tyres: 185R14C * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked Axle * Support Wheel: standard Offer valid while stocks last!!! Offer only valid in Reichertshofen!!! Plus vehicle registration document / COC certificate €39.00 All prices include VAT. Opening hours Reichertshofen: Monday to Friday from 08:00 to 12:00 and 13:00 to 17:00 Closed on Saturdays and Sundays Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. You can also acquire your desired trailer and accessories by arrangement at the following locations: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten-Wulfen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: BLYSS Transporttechnik GmbH Sonnenbergstr. 5a 38723 Seesen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=. Illustrations may not correspond to standard equipment; technical modifications (e.g., tyre sizes) reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 3.150 kg, skupna masa: 4.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/2003, Oprema: ABS, Prikolica Unsinn Absetzipper, teleskopska. S posebej bencinskim motorjem Briggs+Stratton 9 KM. Z električnim zaganjačem in ročnim zagonom, s kabelsko daljinsko upravljalno napravo ter pocinkanim koritom s pokrovom. Pocinkana nadgradnja, tovorna površina 2,46x1,46 m. Primerna tudi za minibagerje, ABS, podporno kolo, 2 hidravlični podpori zadaj, AL-KO osi, DUO Matik, nastavljiva vlečna palica, ===Nemška homologacija=== ==1 lastnik== . Neto cena: 7.800,- EUR ... =====Dnevni odkup gospodarskih vozil, možna tudi menjava===== Fedpfey Hncajx Al Hspg

Stanje: rabljeno, prva registracija: 01/2004, 3x pocinkovani izmenljivi zabojniki, proizvajalec Unsinn. Zunanje mere: cca 2,80x1,37x1,40 m. Notranje mere: cca 2,70x1,30x1,40 m. Cena na kos: 990,- EUR neto. Fpjdoy Hnbvepfx Al Heg ==== Dnevni odkup gospodarskih vozil, možna menjava ====

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 209942, lastna masa: 860 kg, največja dovoljena obremenitev: 1.740 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 1.660 mm, višina nakladalnega prostora: 1.920 mm, velikost pnevmatike: 185/65R14, barva: srebrn, Leto izdelave: 2024, Oprema: hladilna enota, Rental Trailer Unsinn UKT 6C 3617-26-14 for Hire! 1 day = €95 2 days = €90 per day 3 days = €85 per day 4 days = €70 per day Prices include VAT. Chassis Torsion-resistant aluminium chassis for excellent tracking stability Jockey Wheel Reinforced automatic jockey wheel, mounted on a separate cross member, with a load capacity of 900 kg for secure parking of the trailer 4 sturdy crank supports (incl. crank handle) mounted on heavy-duty, hot-dip galvanized crossbeams, for up to 6,000 kg static load Body One-piece sandwich panels (i.e., without bonded joints) with a wall thickness of 45 mm for optimal stability and insulation Inner and outer layers made of galvanized and powder-coated steel sheeting for robust use Elegant exterior colour in Silver (RAL 9006), interior colour in White (RAL 9010) Rear frame and edging profiles made from anodised aluminium sections Double-wing rear door with rubber seal and aluminium hinges Lockable cold storage door with two keys and stainless steel door retainer 2 manoeuvring handles mounted on the front wall profile Galvanized scuff rail running around three sides (height: 200 mm) Refrigeration Unit Renowned Arktik 1600 N refrigeration unit with emergency hotline 1,600 W cooling capacity at a cold storage temperature of +6°C and an ambient temperature of 30°C Fedpfotk Hx Dex Al Hopg Temperature control range from +2°C to +10°C 230 V 50 Hz mains connection Evaporator air flow rate: 750 m³/hour Fully encased unit with an attractive front cover made of impact-resistant ABS plastic, mounted at the top of the front side Operates with environmentally friendly CFC-free refrigerant Electronic automatic defrost of the evaporator

Stanje: rabljeno, lastna masa: 650 kg, skupna masa: 2.000 kg, prva registracija: 08/2012, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.800 mm, Leto izdelave: 2012, The pick-up market for your new or used trailer offers leading brand models ready for immediate collection! - Over 850 new trailers in stock - Over 130 used trailers available at all times - Over 150 vehicle transporters of popular versions with extensive accessories in stock Non-binding sample offer: Used box trailer with sandwich construction and skylight Box with rear wing doors Side panels robust and smooth, suitable for signage Rear door: double-leaf with bar lock Internal loading dimensions approx. 300x150x180 cm Overall dimensions approx. 420x200 cm, height 240 cm Loading height only approx. 51 cm Lashing points, lashing system, rear support, 100 km/h approval Please note tire age Shelf / motorcycle mount - lightweight ramp included Second owner Valid inspection (HU) until 08/2026 Gross weight 2000 kg, empty weight approx. 650 kg Differential taxation according to § 25 UStG, VAT not deductible Fsdpfx Aey D Il Nel Hspg Inspection and on-site purchase are expressly encouraged and can be arranged by appointment during our opening hours from Monday to Friday. 04/26 used fh1070

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 14160410, lastna masa: 600 kg, največja dovoljena obremenitev: 2.000 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 1.300 kg, dovoljena osna obremenitev (os 2): 1.300 kg, dolžina tovornega prostora: 4.260 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 350 mm, skupna dolžina: 5.620 mm, skupna širina: 2.100 mm, vzmetenje: drugo, velikost pnevmatike: 14 Zoll, stanje pnevmatik: 100 odstotek, največja hitrost: 100 km/h, barva: siv, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, Lademaß ca. 2040 x 4260 mm Außenmaße ca. 2100 mm x 5620 mm zulässiges Gesamtgewicht: 2600 kg Fpjdpfx Aljy I Thqe Hog Nutzlast: ca. 2000 kg (Nutzlast variiert je nach Zusatzausstattung) Hersteller: Unsinn Besonderheiten - versenkte Verschlüsse aus Edelstahl - 8 Zurrmulden mit jeweils bis zu 600 daN (kg) belastbar und DEKRA zertifiziert - 14 Zoll Bereifung weitere Ausstattung - Bodenplatte: Multiplex-Holzboden /Holz-Siebdruckplatte 18 mm - sämtliche Bordwände klapp- und abnehmbar - Eckrungen abnehmbar - Bordwand: Aluminium eloxiert Höhe: 350 mm - Fahrzeugpapiere inklusive Fahrwerk - Alko | Gummifederachse m. Radstoßdämpfer und Tempo 100 | V-Deichsel mit Zugkugelkupplung | Automatik-Schwerlaststützrad | Rückfahrautomatik Elektrik - 12 Volt | 13 poliger Stecker | Nebelleuchte | Begrenzungsleuchten Sie möchten diesen Anhänger kaufen oder haben weitere Anhänger-Rückfragen dann benutzen Sie bitte unsere interne Hochlader-Anhäger "Nr.14160410".

Stanje: novo, največja dovoljena obremenitev: 2.380 kg, skupna masa: 620 kg, Leto izdelave: 2024, Information in English Unsinn UB 3016-30-14 (previous designation: UBA 3030-14-1600) Premium low-loader for transporting construction machinery, 2,380 kg payload, 3,000 kg gross vehicle weight, Loading area: 3,060 x 1,600 x 300 mm, 2 laterally swiveling and width-adjustable aluminium loading ramps with integrated ground support, Loading ramps can be swiveled to the side, 10 pairs of lashing points, Spoon rest optional. The construction machine shown is not included in the scope of delivery. Errors and prior sale reserved! Further information Fjdpfevw I Tbsx Al Hopg External dimensions: 0.00306 x 0.0016 x 0.3 m Country of manufacture: DE Please contact Philip Müller, , p-) for more information.

Stanje: novo, največja dovoljena obremenitev: 2.730 kg, skupna masa: 580 kg, Leto izdelave: 2024, Prvoklasna niskopodna prikolica za transport građevinskih mašina, top-model UBA 3618-35-14 (stara oznaka: 3536-14-1800) sa 2.730 kg nosivosti. Ukupna dozvoljena masa 3.500 kg, utovarna površina: 3.660 × 1.800 × 300 mm. Bočno pomične aluminijumske rampe za utovar, utovarne rampe se mogu zakretati u stranu, novo. Opcionalno sa amortizerima za brzinu do 100 km/h (+200 EUR) Opcionalno sa ležištem za kašiku ili drugim dodacima Fpodpfx Alevrbvfe Hog Prikazana građevinska mašina nije uključena u ponudu. Zadržavamo pravo na greške i međuprodaju! Dodatne informacije: Prednje gume: 185R14C Zadnje gume: 185R14C Zemlja proizvodnje: Nemačka Za više informacija obratite se Philipu Mülleru, , p-).