Unsinn Drugo nakup rabljenega (139)

Stanje: novo, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading Area Dimensions: 3660 x 1750 x 1200 mm (L.W.H.) Gross Vehicle Weight Rating: 3500 kg Unladen Weight: 1245 kg Payload: 2255 kg (payload specifications can vary depending on equipment and construction) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers as a prerequisite for 100 km/h approval Steel floor across the entire width made from a single, bent piece Patented load securing system with 14 lashing pins on and under the loading area Each pin rated at 1500 daN (kg), 360° rotatable Side panels fixed on three sides Rear drop gate Removable aluminium partition for flexible compartmentalisation at various positions Sturdy folding rear support legs ensure stable positioning even when detached Electric pump Bodsy I D Nxepfx Agtedh Manual emergency pump, pumpless system Additional hydraulic connection for towing vehicle 2 rear work lights Lighting system with 13-pin plug Reversing lights 2 plastic toolboxes, splash-water protected, mounted left and right under the loading area Flat tarp for protection of dried firewood in bad weather, including storage compartment on the front board Vehicle documents included Available options and accessories for this trailer: 100 km/h approval certificate Spare wheel including holder Anti-theft device Drawbar cover Registration of your new trailer with the local road traffic office

Stanje: novo, Unsinn lightweight box body with double rear doors and side hatch Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2000 kg Unladen weight: approx. 510 kg Payload: approx. 1490 kg (payload may vary depending on equipment and configuration) Walls made of lightweight panels: GRP-steel sandwich, RAL 9016 Smooth GRP exterior walls for optimal trailer signage/wrapping Impact-resistant interior walls reinforced with steel Double rear doors with high-quality aluminium hinges Robust stainless steel rotary bar lock (lockable) on the rear doors Stainless steel door holders Sales hatch on the right-hand side (in direction of travel) with robust stainless steel rotary bar lock (lockable) Side hatch dimensions: 2500 x 1440 mm (L x H) Loading floor: 18 mm multiplex phenolic resin-coated anti-slip, waterproof flooring Load securing system with 8 adjustable lashing rings Lashing rail on the side and front walls, height 900 mm Translucent roof for high light transmission Rear frame and edging made of special anodised aluminium profiles Bdjdpjy I Smxsfx Agtoh Magnetic, swiveling interior LED lamp with motion detector (freely positionable inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing lights Front marker lights Two maneuvering handles on front wall AL-KO coupling head with collision protection Including vehicle documents Optional features and accessories for this trailer: - Spare wheel - Shock absorbers including 100 km/h certificate - Rear-mounted support legs - Custom interior fittings We would be pleased to show you how to finance your new trailer in convenient monthly installments and provide you with a personalised financing offer. We always have more than 2,000 trailers in stock. Many of our trailers can be found online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard delivery. Due to ongoing improvements, images and technical data may differ slightly. Errors and changes excepted!

Stanje: novo, 9930448 Construction Machinery Transporter UB with Swiveling Loading Ramps The universally applicable machine transporter from Unsinn, thanks to its high sidewalls, also enables the transport of bulk materials. Manufacturer: Unsinn Model: UB 3618-35-14 Internal dimensions: 3660 x 1800 x 300 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: approx. 770 kg Payload: approx. 2730 kg (payload figures may vary depending on equipment and design) Unique, torsion-resistant longitudinal beam chassis for optimum driving characteristics Welded hollow profile construction, fully hot-dip galvanized Body made from extremely robust steel sidewall profiles Axles with self-adjusting brakes Walk-on mudguards Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg Bdsdpfx Agsy I Tu Rotoh 10 sturdy lashing points on the sides, load capacity per lashing point 2000 kg 4 fold-down, adjustable aluminum ramps with integrated ground support, load capacity 3500 kg/pair The loading ramps allow for quick and easy loading of machinery Compulsory support on the loading ramps Ramps can be swiveled to the side for optimal loading of, for example, palletized goods using a pallet fork or forklift Floor made of multiple-bonded phenolic plywood, 18 mm, seamless, anti-slip, and waterproof Lighting with 13-pin connector and reverse light Marker lights Vehicle documents included Possible additional options and accessories for this trailer: Excavator bucket holder on the drawbar Mounted aluminum toolbox Spare wheel including holder For individual and tailor-made financing options, simply contact us! A further 1,500 trailers available at the Rosemeier Trailer Centre. Come and visit us. We are happy to advise you. Images may show accessories not included in standard delivery. Due to continuous improvement, images and technical data may vary slightly. Subject to errors and changes!

Stanje: novo, Box trailer with ramp Manufacturer: Unsinn Model: UKU 361719-26-14 Internal dimensions: 3660 x 1750 x 1940 mm (LxWxH) Gross vehicle weight rating: 2,600 kg Unladen weight: approx. 640 kg Payload: approx. 1,960 kg (Payload may vary depending on equipment and construction) Loading height: 550 mm Colour: white Side walls made of lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal signage/advertising wrap Steel-reinforced inner walls for high impact resistance Ramp Robust stainless steel rod locking system (lockable) on rear doors Stainless steel door retainers Load floor made of 18 mm waterproof, non-slip, multi-bonded screen printed plywood Lashing system with 8 adjustable tie-down rings for optimum load securing Slatted lashing rails on side and front walls, height 900 mm Roof made of unique GRP-steel panel Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light with motion sensor (can be positioned anywhere in the interior) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing lights Front position lights Two manoeuvring handles on the bulkhead AL-KO coupling head with collision protection Including vehicle documents Possible additional options and accessories for this trailer: Spare wheel Shock absorbers incl. 100 km/h certification Support struts mounted at the rear Custom interior fit-out If you are interested in a custom-tailored financing solution, simply contact us! Bodpfx Agjy I Smrotedh Over 1,500 trailers in stock at the Rosemeier Trailer Centre. Feel free to visit us. We are happy to assist you. Images may show accessories not included in the standard delivery. Ongoing improvements may cause images and technical data to differ slightly. Errors and changes excepted!

Stanje: novo, 9935373 Bjdpfxjy I I D Hs Agtsdh Platform trailer with extendable drawbar Manufacturer: Unsinn Fahrzeugtechnik Model: ULM 4820-35-14 Gross vehicle weight: 3,500 kg Unladen weight: approx. 940 kg Payload: approx. 2,560 kg (payload figures may vary depending on equipment and construction) Dimensions: approx. 4,860 x 2,040 x 750 mm (L x W x H) Telescopic tubular drawbar adjustable without tools (free drawbar length 3,100 mm) 4 stake pockets 100 x 100 mm, installed flush with the loading platform Two plug-in stakes 90 x 90 mm (total length approx. 3,000 mm) with various lashing eyes for load securing Adjustable mounting support for the extendable tow bar Torsion-resistant longitudinal beam chassis for safe driving characteristics Robust hollow-section construction, welded and fully hot-dip galvanized by immersion Reinforced jockey wheel for safe stationary support of the loaded trailer, load capacity 500 kg 8 folding, rattle-free lashing brackets recessed into the floor profile 8 additional lashing eyes under the loading area 8 foldable lashing bowls 8 lashing eyes under the load platform Internal long-action closures made of metal Removable side panels and corner stanchions Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel incl. holder Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Three-way tipper with electric pump & cordless drill pump Manufacturer: Unsinn Model: UDK 3620-35-14 Dimensions: 3660 x 2040 x 350 mm (LxWxH) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 1065 kg Payload: approx. 2435 kg (payload may vary depending on equipment and configuration) Bjdsy I E Ezspfx Agtsdh Electrohydraulic pump with emergency manual pump function, allowing easy tipping with a cordless drill in case of weak battery Integrated battery charger with 230 V plug Battery and pump unit safely stowed and protected from dirt in the battery box Integrated ramp compartment with tensioning system and foldable license plate holder for storing loading ramps under the platform (for easy retrofitting of ramps) Unique, torsion-resistant longitudinal chassis frame for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous massive steel floor across the entire vehicle width Maintenance support for securing the raised body Reinforced automatic jockey wheel Maneuvering handle with practical strap winder for ease of use Load securing system for greater flexibility and efficiency in load restraint, DEKRA certified 14 recessed lashing points mounted in the steel floor Lashing points on and below the loading platform, each rated up to 1500 kg and 360° rotatable Dropsides fully foldable and removable Tailgate with steel cladding, foldable, including slip guard for loading ramps Robust toggle latches on the sideboards 4 removable steel corner stanchions Lighting with 13-pin plug and reversing spotlight Including vehicle documents Available options and accessories for this trailer: Whether mesh extension, steel extension, or dropside extension—choose the variant that suits your needs and customize your structure accordingly. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension on the front and rear can be perfectly combined with either a steel or standard dropside extension on the sides—no extra effort required. Loading ramps Cargo securing net Anti-theft device Registration of your new trailer with the local road traffic authority

Stanje: novo, Box trailer with double-wing rear door and side door Manufacturer: Unsinn Model: UKU 361719-26-14 Internal dimensions: 3660 x 1750 x 1940 mm (L x W x H) Gross weight: 2,600 kg Unladen weight: approx. 630 kg Payload: approx. 1,970 kg (payload may vary depending on equipment and configuration) Loading height: 540 mm Colour: white Walls made from lightweight panels, comprising a GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal signage/wrapping of the trailer Interior walls reinforced with steel provide high impact resistance Double-wing rear door with premium aluminium hinges Robust lockable stainless steel rotary bar locks on rear doors Bdjdpfxoy I Ndhs Agtoh Stainless steel door retainers Side door on the right in the direction of travel Load floor made of multi-glued 18 mm screen-printed panel, anti-slip and waterproof Securing system with 8 adjustable lashing rings for optimum load securing Lashing rails on the side walls and front wall, height 900 mm Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light incl. motion detector (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing lights Front positioning lights Two manoeuvring handles on the front wall ALKO coupling head with collision protector Including vehicle documents Options and accessories available for this trailer: Shock absorbers incl. 100 km/h certification Spare wheel incl. holder Anti-theft device Registration of your new trailer with the road traffic authority

Stanje: novo, Special offer! Stock vehicle from 2022! No initial registration! 9929367 Sales trailer with stylish rounded corners Manufacturer: Unsinn Model: VM 1836-13-2040 Gross vehicle weight: 1,800 kg Unladen weight: approx. 970 kg Payload: approx. 830 kg (payload may vary depending on equipment and construction) Dimensions: approx. 3,600 mm x 2,040 x 2,300 mm (L x W x H) Loading height: approx. 430 mm Fully welded chassis, hot-dip galvanized by immersion Reinforced automatic jockey wheel 4 sturdy scissor supports ensure stable parking Thermo-sandwich body Inner and outer skins made of hot-dip galvanized and powder-coated steel 40 mm PU core insulation Exterior colour: silver RAL 9006 Access door in the front wall, 2,000 x 650 mm, with integrated personnel lock Bedpfey I R U Iex Agtsdh Step on drawbar Sales hatch on the right in the direction of travel, with robust rotary latch External door for gas cylinder compartment 18 mm anti-slip phenolic plywood floor with tough PVC covering Lighting with 13-pin plug and reversing light Including vehicle documents Options and accessories available for this trailer: Shock absorbers including 100 km/h certificate Custom interior fittings Spare wheel including holder Anti-theft device Registration of your new trailer at the local vehicle licensing authority We are happy to show you how to finance your new trailer in convenient monthly installments and will provide you with a customized financing offer. We have more than 2,000 trailers in stock at all times. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show optional equipment not included in the standard scope of delivery. Due to ongoing improvements, images and technical data may differ slightly. Errors and changes excepted!

Stanje: novo, Three-way tipper with E-pump & cordless screwdriver pump, loading ramps and support stands Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency pump function 'Pumpless', allowing tipping via cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit are securely stored and protected from dirt in the battery compartment Aluminium loading ramps, 2560 x 300 mm, load capacity 2800 kg per pair Integrated ramp compartment with tensioning device and foldable license plate holder for storing the ramps under the loading platform Robust drop-down support legs Unique, torsion-resistant longitudinal chassis frame for improved driving stability and safety Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor running the full width of the vehicle Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Cargo securing system for increased flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing points on and under the loading floor, each rated up to 1500 kg and rotatable 360° Bdsdpjy I Eu Nofx Agtsh Sidewalls fully foldable and removable Rear sidewall, steel-plated, foldable with anti-slip lock for loading ramps Robust cam lever locks on the sidewalls 4 removable steel corner posts Lighting system with 13-pin connector and reverse light Including vehicle documents Optional features and accessories for this trailer: - Sidewall extension - Mesh extension - Load securing net - Anti-theft device - Registration of your new trailer with the vehicle registration authority

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7500010, lastna masa: 450 kg, skupna masa: 1.400 kg, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.570 mm, višina nakladalnega prostora: 1.940 mm, velikost pnevmatike: 185/65 R14, barva: bela, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2025, Dimensions Gross weight: 1,400 kg Internal body dimensions: 3,050 × 1,570 × 1,940 mm Loading height: 530 mm Payload: 950 kg Tyres: 185/65 R14 Jockey wheel Reinforced automatic jockey wheel with a load capacity of 500 kg for safe parking of the trailer Body Walls made of proprietary, weight-optimised Unique Panels for significantly increased payload, consisting of GRP-steel sandwich construction in traffic white (RAL 9016) High-quality, smooth GRP exterior coating (seamless) with gelcoat sealing, suitable for custom signage and graphics —> Benefit of gelcoat sealing: exterior does not yellow and is UV-protected Interior cladding made of robust steel sheet for high impact resistance and stability Light roof for optimal daylight illumination of the interior Bdjdpfxoxwanao Agteh Rear frame and edging profiles made of anodised aluminium profiles Double-wing rear doors with aluminium hinges, opening dimensions: 1,500 x 1,900 mm Lockable stainless steel cam lock and door retainer 2 manoeuvring handles mounted on the front wall profile Load securing Lashing system with adjustable lashing rings in the floor profile for flexible cargo securing 8 lashing rings, each with a load capacity up to 300 daN (kg) Lashing rail for straps and locking bars mounted on the side walls and front wall at a height of 900 mm

Stanje: novo, Zadnji kiper Proizvajalec: Unsinn Tip: UHK 2315-15-10 Notranje mere: 2300 x 1500 x 300 mm (D x Š x V) Dovoljena skupna masa: 1500 kg Lastna masa: pribl. 385 kg Nosilnost: pribl. 1115 kg (nosilnost je lahko odvisna od opreme in zasnove) Višina nakladalne površine: 700 mm Okvir: edinstveno, torzijsko odporno aluminijasto podvozje za varno vožnjo Ojačano avtomatsko nosilno kolo Z ročajem za manevriranje Stranice iz aluminijastega votlega profila z vgrajenimi zapirali na dolgi poti 4 snemljivi jekleni kotni stebrički 6 vgrajenih priveznih obročev v jeklenih tleh Razsvetljava s 13-polnim vtikačem in vzvratno lučjo Hidravlična enota brez črpalke, vključno z nastavkom za vtič Vključno z dokumenti vozila Možne dodatne možnosti in oprema za ta priklopnik: Bjdpey I E Nmsfx Agtodh Rezervno kolo Zadnje podporne noge Zaščita proti kraji

Stanje: novo, Posebna cena! Vozilo na zalogi iz leta 2023! Brez prve registracije! 9931820 Bjdpfx Aey I Tfpjgtjdh Spustni priklopnik / Priklopnik za motorna kolesa Proizvajalec: Unsinn Tip: UA 2615-14-13 Mere: 2600 x 1550 x 150 mm D.Š.V. Dovoljena skupna masa: 1400 kg Lastna masa: cca 370 kg Nosilnost: cca 1030 kg Amortizerji na kolesih, vključno z dovoljenjem za 100 km/h Nakladalna površina hidravlično spuščajoča Avtomatsko podporno kolo 6 trdnih privezovalnih ušes na nakladalni površini Obročasta perforirana jeklena ograja – številne dodatne možnosti pritrjevanja 13-polni priključek Obročne luči Vključno z dokumentacijo vozila Možne možnosti in dodatna oprema za ta priklopnik: Rezervno kolo z nosilcem Zaščita proti kraji Registracija novega priklopnika na prometnem uradu

Stanje: novo, Special Offer! Stock vehicle from 2023! No prior registration! 9931120 Box trailer with double wing doors Manufacturer: Unsinn Model: ULK 2642-14-1750 Internal dimensions: 4260 x 1750 x 1940 mm (L x W x H) Permissible total weight: 2,600 kg Unladen weight: approx. 640 kg Payload: approx. 1,960 kg (Payload may vary depending on equipment and configuration) Loading height: 550 mm Colour: White Sidewalls made of lightweight panels, consisting of GFRP-steel sandwich in RAL 9016 Smooth GFRP exterior walls for optimal signage or wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Double wing rear doors with high-quality aluminium hinges Robust stainless-steel bar lock (lockable) on rear doors Stainless-steel door retainers Load area made of 18 mm multiple-glued anti-slip, waterproof screen-printed plywood Load securing system with 8 adjustable lashing rings for optimal cargo securing Slat lashing rail on the side and front walls, height 900 mm Transparent roof for excellent light transmission Rear frame and edge profiles made from special anodized aluminium profiles Magnetic, swivelling LED interior light with motion sensor (can be freely positioned inside) Bdodpoy I Smlsfx Agtoh Automatic jockey wheel, 500 kg load capacity 13-pin connector and reversing light Front position marker lights Two maneuvering handles at the front wall AL-KO coupling head with collision protection Including vehicle documents Optional features and accessories for this trailer: Spare wheel Shock absorbers including 100 km/h clearance Rear-mounted support legs Custom interior fittings

Stanje: novo, Three-way tipper with petrol-hydraulic unit Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Gross vehicle weight: 3,500 kg Unladen weight: approx. 905 kg Payload: approx. 2,595 kg (Payload figures may vary depending on equipment and configuration) Petrol-hydraulic unit with protective cover mounted in the V-drawbar Integrated ramp compartment with tensioning device and foldable number plate holder for stowing loading ramps under the loading floor (for easy retrofitting of loading ramps) Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Heavy-duty steel floor running the entire width of the trailer Maintenance support for securing the tipped platform Bsdoy I E E Ijpfx Agtsdh Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap reel for easy handling Load securing system for increased flexibility and efficiency, DEKRA certified 10 recessed tie-down points mounted in the steel floor Tie-down points on and under the load floor, each rated for up to 1,500 kg and 360° rotatable Side panels fully foldable and removable Rear panel with steel cladding, foldable with anti-slip protection for loading ramps Robust toggle latches on all side panels 4 slot-in steel corner posts Lighting with 13-pin plug and reverse light Including vehicle documents Possible options and accessories for this trailer: Whether mesh extension, steel extension, or side panel extension – choose the right variant and customize your setup. Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension at the front and rear can be combined perfectly with a steel or side panel extension on the sides – without additional effort. Loading ramps Support legs Load securing net Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Special Price! Stock vehicle from 2022! No first registration! 9928470 Off-road Box Trailer Manufacturer: Unsinn Type: ULK 1330-14-1570 Internal dimensions: 3050 x 1570 x 1940 mm (L x W x H) Permissible gross weight: 1300 kg Unladen weight: approx. 525 kg Payload: approx. 775 kg (payload may vary depending on equipment and design) Off-road tires 215/85R16X 93L on black steel rims Fenders made of tread plate aluminum, walkable Loading height: approx. 550 mm Side door (front right-hand side in direction of travel) 1710 x 750 mm with personnel lock Unique, torsion-resistant aluminum chassis for secure driving performance Body panels made from lightweight composite, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal vehicle lettering/wrap Steel-reinforced interior walls ensure high impact resistance Twin rear doors with high-quality aluminum hinges Robust stainless steel rotary bolt lock (lockable) on rear doors Stainless steel door retainers Floor made of multiple bonded anti-slip phenolic resin plywood, 18 mm thick, water-resistant Lashing system with 8 adjustable lashing rings for optimal load securing Slatted lashing rail on side walls and front wall, height 900 mm Transparent roof for maximum light penetration Rear frame and edging profiles made from special anodized aluminum profiles Magnetic, swiveling LED interior light incl. motion detector (can be placed anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing lights Front marker lights Bjdpfjy I Sglox Agtsdh Two maneuvering handles on the front wall AL-KO coupling head with overrun protection Incl. vehicle documentation Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certification Support stands Cargo bars for optimal load securing Spare wheel incl. holder Anti-theft device Registration of your new trailer at the road traffic authority We are happy to show you comfortable monthly financing options and will prepare a tailor-made financing offer for you. We have over 2,000 trailers in stock at all times. Many of our trailers can be found online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard scope of delivery. Due to ongoing product development, images and technical data may differ slightly. Errors and changes excepted!

Stanje: novo, Box trailer as high loader Manufacturer: Unsinn Model: UKH 5424-30-13 Internal dimensions: 5460 x 2400 x 2100 mm (LxWxH) Gross vehicle weight: 3000 kg Unladen weight: approx. 1220 kg Payload: approx. 1780 kg (payload may vary depending on configuration and design) Exterior color: silver RAL 9006 Unique, torsion-resistant longitudinal beam chassis made from a robust steel frame for safe driving characteristics, fully hot-dip galvanized Walls made from insulated thermo-panels, steel sandwich construction Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Interior and exterior sheeting made from galvanized and powder-coated steel sheet for heavy-duty use 45 mm PU core insulation Double-wing rear door with aluminum hinges Stainless steel rod lock Additional rod lock on the left rear door Stainless steel door holder Load area made from multi-glued phenolic plywood, 18 mm, anti-slip, waterproof Extra interior height: 2100 mm Aluminum edging profiles for a stylish appearance 2 maneuvering handles mounted on the front wall profile Including vehicle documents Bjdpfx Aey I Egfjgtodh Possible additional options and accessories for this trailer: Custom interior fittings Anti-theft device

Stanje: novo, Special offer! Stock vehicle from 2023! No previous registration! 9932883 Refrigerated Trailer Low Loader Manufacturer: Unsinn Model: UKT 6C 3417-30-14 Internal dimensions: 3400 x 1750 x 1900 mm (L x W x H) Gross vehicle weight: 3000 kg Unladen weight: approx. 930 kg Payload: approx. 2070 kg (payload may vary depending on equipment and configuration) Loading height: 590 mm Color: silver-grey Unique, torsion-resistant aluminum chassis for stable driving performance With automatic self-adjusting brakes Reinforced automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 4 sturdy telescopic crank supports for up to 6000 kg support weight Thermo-sandwich construction Inner and outer shell made of hot-dip galvanized and powder-coated steel sheet, suitable for heavy-duty use Insulation: 40 mm PU core Exterior color: silver RAL 9006 Double-leaf rear doors with aluminum hinges Refrigerated compartment lever lock and stainless steel door retainer Rear frame and edging profiles made of special anodized aluminum profiles for appealing aesthetics 200 mm all-round underride protection on three sides Arktik 1600 N Cooling capacity: 1600 watts at a refrigerated compartment temperature of +6°C with an ambient temperature of 30°C Temperature control range from +2°C to +10°C Mains connection: 230 volts, 50Hz Air flow volume (evaporator): 750 m³/hour Fully encapsulated unit with outdoor housing mounted on the front upper section Environmentally friendly CFC-free refrigerant Electronic automatic defrosting of the evaporator The control display is lockable, providing protection against unauthorized operation Electronic digital thermostat for optimal temperature control 220 volt interior lighting Bodsy Nadnjpfx Agtsdh High-quality workmanship – Quality made in Germany Floor constructed from multi-glued screen-printed panel, 18 mm Lighting with 13-pin connector and reversing light Manoeuvring handles on the front Door retainers Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval certificate Spare wheel incl. holder Combination rails on the sides for optimum cargo securing Restraint bars for combination rails Anti-theft device Registration of your new trailer at the vehicle registration office

Stanje: novo, Lowerable box trailer with side door and aerodynamic slope by Unsinn Fahrzeugtechnik Manufacturer: Unsinn Model: UKA 3717-18-13 Internal dimensions: 3750 x 1770 x 1940 mm (L x W x H) Permissible total weight: 1800 kg Unladen weight: approx. 680 kg Payload: approx. 1120 kg (Payload may vary depending on equipment and configuration) Walls made from lightweight panels consisting of GRP-steel sandwich Colour: white RAL 9016 Aerodynamic sloped front Swivelling LED interior light with motion sensor Unique Panels with smooth GRP-coated outer walls for easy wrapping/foiling Steel-coated inner walls for high impact resistance Transparent roof with high light transparency Shock absorbers incl. 100 km/h certificate Robust steel frame with tubular drawbar, fully hot-dip galvanised Bdodpey Nb Egofx Agtsh Rear frame and trim profiles made from anodised aluminium Reinforced automatic jockey wheel incl. practical manoeuvring handle Rear tailgate opens upwards Sturdy stainless steel bar lock on rear tailgate (lockable) Side door (1600 x 750 mm) with robust stainless steel bar lock (lockable) and aluminium hinges Rubber lip on rear tailgate protects the interior from splash water Continuous loading ramp enables simple and safe loading across the entire trailer width Loading surface made from multi-glued phenolic plywood, 18 mm, continuous and jointless, anti-slip and waterproof Ramp angle when lowered approx. 5° Extremely flat ramp angle enables easy loading with a pallet truck 6 foldable lashing rings on the sides inside the body Lighting with 13-pin plug Marker lights Two manoeuvering handles at the front Incl. vehicle documents Available options and accessories for this trailer: Lashing rails on the sides Cargo bars for optimal load securing Spare wheel incl. bracket Anti-theft device Registration of your new trailer at the road traffic office

Stanje: novo, Box trailer with ramp and sales flap Manufacturer: Unsinn Model: UKU 301519-20-13 Dimensions: approx. 3050 x 1570 x 1940 mm (L x W x H) Permissible total weight: 2,000 kg Unladen weight: approx. 575 kg Payload: approx. 1,425 kg (Payload may vary depending on equipment and configuration) Smooth GRP exterior panels for optimal signage/wrapping of the trailer Steel-reinforced interior walls ensure high impact resistance Rear ramp Robust stainless steel bar lock (lockable) on the ramp Stainless steel door retainers Side sales flap on the right (in the direction of travel), equipped with a robust, lockable stainless steel bar lock Side flap dimensions: approx. 2500 x 1440 mm (L x H) Loading floor made of 18 mm multi-glued screen printing plate, slip-resistant and waterproof Lashing system with 8 movable lashing rings for optimal cargo securing Lashing rail on side and front walls, height 900 mm Transparent roof for high light transmission Rear frame and edging profiles made of special anodised aluminium profiles Magnetic, swivelling LED interior light with motion sensor (positionable anywhere inside the interior) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reverse light Front marker lights Two manoeuvring handles on the front wall ALKO coupling head with collision protection Includes vehicle documents Optional equipment and accessories for this trailer: Shock absorbers including 100 km/h approval Spare wheel including holder Stanchion supports Anti-theft device Bjdey I D N Espfx Agtjdh Registration of your new trailer with the vehicle licensing authority

Stanje: novo, Three-way tipper with steel side wall extension Manufacturer: Unsinn Model: UDK-B 3617-35-14 Platform dimensions: 3660 x 1750 x 1100 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 985 kg Payload: 2515 kg (payload may vary depending on equipment and configuration) Bsdey I Nmpepfx Agtedh Tyres: 185 R14 C Steel side wall extension: 750 mm Automatic jockey wheel One-piece pressed steel floor across the full width Patented load securing system with 14 lashing points on and under the platform Each lashing point load capacity: 1500 daN (kg), 360° rotatable Side walls foldable and completely removable Tailgate with steel panelling, foldable, including anti-slip protection for ramps 4 detachable steel corner stanchions Electric pump Manual emergency pump (Pumpless System) Hydraulic connection for towing vehicle (additional) 2 rear work lights Lighting system with 13-pin plug Reversing light Including vehicle documents Available options and accessories for this trailer: - 100 km/h certificate - Spare wheel incl. bracket - Drop-down support legs - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Stanje: novo, Long material trailer with rear light carrier Manufacturer: Unsinn Model: LM 3542-14-2040 Internal dimensions: 4260 x 2040 x 350 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: approx. 1030 kg Payload: approx. 2470 kg (Payload may vary depending on equipment and construction) Loading height: approx. 780 mm Rear light carrier extendable up to 2000 mm, flush with the upper edge of the loading area, loadable with max. 200 kg of long material (TEA), with superstructure length 3660 mm only extendable up to 1700 mm Stake pocket 100x100 mm, mounted flush with the loading surface Insertable stanchions 90x90 mm, total length approx. 3000 mm Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics Hollow section construction, welded and fully hot-dip galvanized in an immersion bath Variable support bracket for drawbar mounting (visible in pictures but not included in offer) Bodpoy I Uy Ijfx Agtedh With self-adjusting brakes Variable support bracket for drawbar mounting (visible in pictures, but not included in the offer!) Reinforced jockey wheel for secure parking of the loaded trailer, load capacity 500 kg 8 folding lashing recesses, recessed in the floor frame profile 8 lashing rings under the loading area Drawbar tube extendable without tools, free drawbar length approx. 3100 mm Aluminium hollow section, anodised, foldable on all four sides, removable with recessed locks 4 plug-in steel corner stakes for high load capacity Made from multiple laminated, screen-printed panels, 18 mm thick, seamless, anti-slip and waterproof Lighting with 13-pin connector Reversing light Including vehicle documents Possible options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Spare wheel incl. holder Toolbox Anti-theft device Registration of your new trailer at the vehicle registration office Variable support bracket for drawbar mounting (visible in pictures, but not included in the offer) We will gladly show you how you can finance your new trailer in convenient monthly instalments, and prepare an individual financing proposal for you. We have more than 2,000 trailers in stock at all times. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard scope of delivery. Due to continuous development, images and technical data may vary slightly. Errors and changes excepted!

Stanje: novo, Box trailer with upright loading ramp Manufacturer: Unsinn Model: UT-K 3015-13-14 with upright steel mesh ramp Dimensions: 3000 x 1550 x 1000 mm (L x W x H) Gross weight: 1300 kg Unladen weight: approx. 335 kg Payload: approx. 965 kg Bodpfey Narlsx Agtedh Loading height: 550 mm Tyres: 185/65 R 14 Chassis: unique, torsion-resistant aluminium frame for safe driving characteristics Axles: with automatically adjusting brakes Jockey wheel 4 recessed, folding lashing eyes mounted in the side wall Side walls made of aluminium hollow profiles with recessed locks Steel mesh ramp with gas strut assist - mounted upright across the full width of the trailer at the rear - Length: 1800 mm - Load capacity: approx. 500 kg Lighting with 13-pin plug and reversing light Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h type approval Spare wheel incl. holder Anti-theft device Mesh extension 650 mm Flat tarpaulin Load securing net Registration of your new trailer with the motor vehicle authority

Stanje: novo, Special price! In-stock vehicle from 2022! Never registered! 9929366 Bdjdpfxsy I Sh Ns Agteh Plywood box trailer with loading ramp and support stands Manufacturer: Unsinn Model: ULK 1325-14-1420 Internal dimensions: 2550 x 1420 x 1940 mm (L x W x H) Permissible total weight: 1,300 kg Unladen weight: approx. 405 kg Payload: approx. 895 kg (Payload data may vary depending on equipment and configuration) Loading height: approx. 550 mm Unique, torsion-resistant aluminium chassis for safe driving characteristics Walls made from lightweight panels, consisting of GRP-steel sandwich in RAL 9016 Smooth GRP exterior walls for optimal trailer lettering/wrapping Internal walls reinforced with steel for high impact resistance Loading ramp with gas strut assistance and stainless steel rotary bolt lock (lockable) Rear stabiliser legs fitted Stainless steel door retainers Load floor made of 18 mm multi-bonded phenolic plywood, anti-slip and waterproof Securing system with 8 adjustable lashing rings for optimal load securing Slat lashing rail on the side walls and front wall, height 900 mm Translucent roof for high light transmission Rear frame and edging profiles made of special anodised aluminium profiles Magnetic swivelling LED interior light with motion sensor (can be positioned anywhere inside) Automatic jockey wheel, load capacity 500 kg 13-pin plug and reversing light Front marker lights Two shunting handles on the front wall AL-KO coupling head with collision protection Including vehicle registration documents Additional options and accessories for this trailer: - Spare wheel - Shock absorbers for 100 km/h road approval - Cargo restraint bar - Custom interior fittings - Registration of your new trailer at the Department of Motor Vehicles We are happy to show you financing options with convenient monthly rates tailored to you personally. We have more than 2,000 trailers permanently in stock. Many of our trailers can be found online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard scope of delivery. Due to ongoing developments, images and technical data may differ slightly. Errors and changes reserved!

Stanje: novo, Drop-bed trailer with extremely low approach angle Manufacturer: Unsinn Model: UA 3118-15-13 Motorcycle trailer, machine transporter Gross vehicle weight: 1,500 kg Unladen weight: 455 kg Payload: approx. 1,045 kg (payload figures may vary depending on equipment and configuration) Dimensions: 3,150 x 1,800 x 150 mm Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe driving characteristics, fully hot-dip galvanized in an immersion bath 3-sided body made of robust steel profile Shock absorbers including 100 km/h certification Continuous loading ramp allows access over the entire width of the loading area Folding license plate holder mounted Sturdy plastic mudguards fitted Reinforced, automatic jockey wheel for secure parking of the loaded trailer Platform made of multiple-bonded phenolic resin-coated plywood, 18 mm, seamless, anti-slip and waterproof Fast and secure lashing all round via outer frame 1 lashing ring on the rear center of the loading area Ramp angle in lowered position approx. 6° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering system and mechanical safety lock Bdodoy Nb H Depfx Agtsh Tyres: 195/50 R13C Braked Including vehicle documents Possible options and accessories for this trailer: Spare wheel including holder Anti-theft device Registration of your new trailer at the road traffic authority

Stanje: novo, Lowerable Trailer – Ideal for Motorcycle Transport Manufacturer: Unsinn Model: UA 3118-18-13 Internal dimensions: approx. 3150 x 1800 x 150 mm (L x W x H) Gross vehicle weight: 1800 kg Unladen weight: approx. 440 kg Payload: approx. 1360 kg (payload specification may vary depending on equipment and configuration) Loading height: 460 mm Unique, torsion-resistant longitudinal chassis for safe handling, fully hot-dip galvanized Body: 3-sided, made from robust steel profiles Continuous loading ramp allows loading across the entire width of the platform Shock absorbers including 100 km/h type approval Self-adjusting brakes Folding license plate holder fitted Sturdy plastic mudguards mounted Secure and rapid lashing all around the outer frame 1 lashing ring on the rear centre of the loading area Reinforced automatic jockey wheel for secure parking of the loaded trailer Durable, anti-slip, waterproof, multi-bonded screen-printed floor plate, 18 mm, continuous, without joints Ramp angle in lowered position approx. 5° Lighting with 13-pin plug and reversing light Hand pump with hydraulic lowering system and lowering lock (only on braked version) Including vehicle documents Bsdpfx Ajy Nb Nlegtsdh Available options and accessories for this trailer: Motorcycle wheel chock Motorcycle tie-down straps Drop-side extension Winch Spare wheel including holder Anti-theft device * Registration of your new trailer at the vehicle licensing office