Müller-Mitteltal Drugo nakup rabljenega (241)

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic leaf springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V - 15-pin and additional 12 V - 7+4-pin power cables * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel bracket, basket type, mounted on the right side * Closed plastic individual mudguards at the front * Straight rear steel mudflaps each with spray suppression * Side underrun protection * Offset cranked drawbar extended by 500 mm to the front * Front extension of the bogie platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lid, lockable * Chassis made of high-strength fine-grained steel * Floor above bogie platform: 50 mm; floor in low-loader platform: 60 mm softwood * Outer planks of loading ramps: 50 mm bamboo wood Cgsdpfx Aol Th Evehusn * 4 stake pockets per side (no stakes included) with simultaneous 2 t lashing capability * Load securing package comprising: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair of 13.4 t lashing rings per side front and rear on the outer frame, 4 pairs of 10 t lashing rings per side, pivoting and retractable, loadable in all directions and recessed in the outer frame, 2 pairs of 6.4 t lashing rings at the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not in the rear slope) * Widening boards stored in a side locker on the left * Excavator arm rest above rear axle to rear slope approx. 2,300 x 740 x 190 mm * Rear mechanical drop legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side ramp adjustment on sliding tube from ramp shaft * Loading platform above turntable: approx. 2,990 x 2,520 mm * Rear loading platform: approx. 6,280 x 2,520 mm * Loading height loaded: approx. 860 mm (incl. 860 mm rear slope) * Chassis, bogie, loading ramps, mechanical folding legs at the rear hot-dip galvanized * Axles, springs, air reservoirs and turntable painted in black tone * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 14 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no installation required on the truck side) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5 t axles Cgodowb Rakopfx Ahuen * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment mechanism * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted on the right side * Reflective contour marking strips on the sides and rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear underride bumpers * Foldable A-sign at the rear * LED tail lights * 15-pin electrical socket * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor plate with wheel recesses in the bogie area * Roll-off container transport: container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking device and mechanically pluggable stops at the front in the track * Load securing certificate according to DIN 30722-1 * 1 transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 relocatable skip stops for lateral centering of the skips, the front 4 skip stops are plug-in with pivoting stops * 3 pairs of 10 t UVV lashing rings at the sides for attaching tie-downs for positive and non-positive securing of the skips; 4 lashing bars per side (cloverleaf type) and 1 pair of 13.4 t UVV lashing rings to the front * Lashing package with additional 4 x 8 t lashing eyes per side recessed into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Continuous weld seam as an anti-slip surface in the drive-on ramp area * Mechanical drop-down supports at the rear * Aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * Permissible gross weight of 20,000 kg technically possible * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, Leto izdelave: 2025, Cable drum transport trailer. Permissible total weight 8,800 kg, payload 5,820 kg. Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate Hatz diesel engine (6.5 HP), hydraulic drum drive with rubber-coated drive rollers, drum diameter 800-3,000 mm, drum width up to 1,700 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, Continental 315-80R22.5 tires, tire pressure monitoring. 40 mm height-adjustable towing eye, 2-line air system, 24 V LED lighting. Toolbox. Vehicle fully hot-dip galvanized. New vehicle incl. manufacturer's warranty. = Further information = Unladen weight: 2,980 kg Payload: 5,820 kg GVW: 8,800 kg Rear tires: 315-80R22.5 Country of manufacture: DE For further information, please contact Jan-Marc Schwickert. Cgedpswdd Aqofx Ahusn

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system Csdpfjv Eq Evsx Ahujgn * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * Rear fold-out support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for retrofitting container locks for transporting 20" containers * Bolt-on bulkhead made of smooth sheet metal * Trapezoidal-profiled steel side panels, mid-hinged, split once * Rear panel, insertable between the ramp holders, can be stored in front of the bulkhead when not in use * Bolt-on rear stanchions ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various holes in the bulkhead and end crossmember for 1.2 t lashing possibilities ----Ramps: * One-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approx. 860 mm chassis approach angle at rear ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, tailboard, fold-out support legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in a black hue * Sideboard panels painted RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: * Reinforced and certified body to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders Cgjdpfx Aetr Sucohujn * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic suspension with tandem balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * Tyre pressure monitoring with in-cab display via EBS signal (no additional truck-side installation required) * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, right-hand side * Bolt-on underride guard * Plastic quarter mudguards ----Chassis: * Main frame made of high-tensile fine-grained steel ----Tipper Body: * Mesh hooks on the sides and rear in the central locking mounts, plus 2 hooks on the front wall * Steel pallet 2-way tipper body, fixed headboard made of smooth sheet metal, continuous side walls – drop-down without central stanchions, sideboard spring assists and swinging function via manual central locking * Rear stanchions bolted * Steel rear wall inserted in front of ramps * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side, recessed into outer frame * 4 mm floor made of high-tensile fine-grained steel ----Ramps: * Two-piece mechanical grid ramps with aluminium tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underride guard, mechanical props, and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Sideboards and body finished in RAL 9010 pure white * Optional body and side wall painting in other RAL shades at extra cost ----Information: * Brand new vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 07/2026

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel Csdstr St Ujpfx Ahuogn ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1 design: suitable for roll-off containers and use as a lowbed trailer * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment facility * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design, right-hand side * Reflective contour marking tape on sides and rear Csdpfx Ahjl Tq Nmeusgn * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear collision protection buffer * Foldable A-board at the rear * LED tail lights * 15-pin power connector * Main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point container locking system and mechanical locking angles front in the guide track, cargo securing certificate according to DIN 30722-1 * Lashing package including: 1 pair of 10 t UVV lashing rings at the front bulkhead support, 3 pairs of 10 t UVV lashing rings laterally in the outer frame, 4 x 2 t cloverleaf-style lashing eyes on each side, 4 x 8 t lashing brackets recessed in the outer frame * Welded bead as anti-slip surface in the running area of the ramp * Mechanical drop-down supports at the rear * 1 pair of aluminium loading ramps (10.6 t/pair) measuring 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking parts, rear supports hot-dip galvanized * However, the drawbar, axles, and air tanks painted in black * New vehicle without initial registration, full manufacturer warranty * Subject to errors and prior sale * Available from calendar week 12/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1 design: Suitable for both roll-off containers and as a low loader Cedpfxel Tpc Ao Ahujgn * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10-ton axles * Air suspension with manual lowering function at the rear * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height coupling * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design, mounted right side * Reflective contour tape, side and rear * Side underride protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection buffer * Foldable "A"-sign at the rear * LED rear lights * 15-pin power connector * Main frame with raised outer rails for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic four-point locking system and mechanically insertable front stops in the track; cargo securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair 10-ton UVV lashing rings at front bulkhead carrier and 3 pairs 10-ton UVV lashing rings fitted on side outer frame; each side features 4 x 2-ton cloverleaf lashing points and 4 x 8-ton flush-fitted lashing brackets in outer frame * Continuous weld bead as anti-slip surface in the ramp running area * Mechanical drop-down rear supports * 1 pair aluminum loading ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Chassis, bogie, locking elements, rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black * New vehicle without initial registration, full manufacturer’s warranty * Subject to prior sale and errors excepted * Available from calendar week 12 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * 15-pin power connector * LED lighting ----General Fittings: * Support winch at the front Codpfx Aev D Tcbshuogn * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Bolted smooth sheet metal bulkhead * Side panels made of trapezoidal profiled steel sheet, foldable, split once in the middle * Steel rear wall, can be inserted between the ramp holders when not in use, stored inside at the front wall * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2t lashing capacity every 480 mm * Option to fit 3t recessed lashing rings every 600 mm * 1 x 6.3t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2t lashing options ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Painting: * Drawbar, bulkhead, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and support winch painted in a shade of black * Side panels painted in RAL 9010 pure white * Side panel painting in other RAL colors available at extra cost ----Information: * Reinforced and certified construction in accordance with EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.620 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9: ----Braking system: * Electronic braking system (EBS) * Emergency release device for spring-type actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Hot-dip galvanized drawbar with 40 mm flange eye, height-adjustable by 300 mm ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights Cjdpsm Angvofx Ahuogn ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical hot-dip galvanized fold-down supports at the rear * Galvanized steel toolbox, right side * Hot-dip galvanized bolted underrun protection * Plastic quarter mudguards ----Tipping body: * Mesh hooks at sides and rear in the central locking mounts and 3 pieces on the front wall * Hot-dip galvanized chassis * Steel platform – 3-way tipper body * Continuous side walls without center stanchions, foldable with drop-side spring lifter * Rear tailgate foldable and swinging via manual central locking * Bolt-on hot-dip galvanized rear stanchions * 4 mm steel floor plate * Prepared for later installation of drop-side extensions * 5.5-meter-long body ----Load securing: * 1 x 5 t lash ring in each corner * 4 x 3 t lashing eyes each side, recessed in the outer frame ----Ramps: * Rear guide rail for loading ramps * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis, accessible from the rear ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted black * Body color: RAL 9010 pure white * Painting of side walls and tipping body in any RAL color available at extra cost ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.620 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t Gigant axles Cgsdpfol Thx Eex Ahusn ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Hot-dip galvanized, height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED rear lights ----General Attachments: * JOST mechanical landing gear at the front * 2 mechanical, hot-dip galvanized drop legs at the rear * Toolbox made from galvanized sheet steel on the right side * Hot-dip galvanized bolted underrun protection * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the sides and rear at the central locking mounts, plus 3 hooks on the front wall * Hot-dip galvanized chassis * Steel pallet – 3-way tipper body * Fold-down continuous side walls without center posts, with drop side spring-assist * Rear wall can fold down or swing via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm steel floor plate * Preparation for retrofitting additional side wall extensions * Bridge length: 5.5 meters ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing points recessed in the outer frame on each side ----Ramps: * Rear mounting track for loading ramps * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under cargo area at the rear of the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Painting: * Axles, springs, air tanks, drawbar, and landing gear painted in black * Tipping body color: RAL 9010 pure white * Painting of side walls and tipping platform in any RAL color available for an additional charge ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle, no initial registration, with manufacturer’s warranty * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex Egestorf, A7

Stanje: rabljeno, največja dovoljena obremenitev: 7.090 kg, skupna masa: 9.990 kg, konfiguracija osi: 2 osi, prva registracija: 05/1999, dolžina tovornega prostora: 4.530 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna masa: 9.990 kg Lastna masa: 2.900 kg Nosilnost: 7.090 kg Skupna dolžina: 6.400 mm Dolžina nakladalne površine: pribl. 4.530 mm Širina: 2.550 mm / Nakladalna širina pribl. 2.400 mm Višina nakladalne površine: pribl. 850 mm Dodatne informacije - Stranice 400 mm, zložljive Cjdpfx Aox Uv D Ujhujgn - 8 pritrdilnih ušes - BPW osi

Stanje: rabljeno, lastna masa: 3.100 kg, največja dovoljena obremenitev: 7.400 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2006, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 360 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: bež, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, tandem, listnato vzmetenje, ABS (protiblokirni sistem), pritrdilna ušesa, mehanske rampe, podpora spredaj, podpora zadaj, shranjevalni zaboj, vlečna droga nastavljiva po višini. Nadgradnja: tandem nizkopodni priklopnik z mehanskimi naletnimi rampami, 2x BPW osi, bobnaste zavore, vrtljivo vlečno uho 40 mm in 50 mm, vlečna droga nastavljiva po višini! Nakladalna višina ca. 900 mm! Dolžina ramp ca. 2700 mm! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane! Cgjdpfx Ahsx Rdqhjuon

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped version * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted front bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the middle * Steel rear wall, insertable between the ramps; stowage fixture in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm Codpfemi Tmaox Ahuegn * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, 2 x 8 t retractable UVV lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and support winch painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber rear lights * Reinforcement package for drilling rig transport on chassis Cgedpfx Asmi Tcqehuen * 50 mm softwood floor, clamped version * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made from smooth steel sheet * Split steel sidewalls - trapezoidal profile - foldable with central folding stake * Steel rear wall, slidable between ramps - interior mounting bracket for storage when not in use, in front of the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Possible to install 3 t folding lashing brackets every 600 mm * Load securing package: at each front and rear corner 1 x 10 t UVV-rated lashing ring, on each side 2 x 8 t UVV-rated retractable lashing rings in outer frame, various holes in front and rear crossmembers for 1.2 t lashing options * One-piece sliding ramps 12 t/pair, approx. 2,750 x 620 mm * Rear drive-on bevel approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-on ramps hot-dip galvanized * ---Axles, air reservoirs, flange towing eye, and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear front * Rear external folding supports * Plastic toolbox front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood flooring * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach incline approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Drop-sides painted in RAL2011 deep orange Cgsdpfx Ahol Th Nreusn * Painting of the side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear Csdpfx Ahjl Thy Rsujgn * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Platform length 5.37 m * 50 mm softwood floor * Bolted smooth sheet steel front wall * Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring * Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * In each corner front and rear, 1 x 6.3 t lashing ring Csdpfx Asl Th Ncjhuogn * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, loading ramps galvanized * Axles, springs, air tanks, 40 mm flange towing eye painted in black * Board walls painted in RAL2011 deep orange * Side panels available in other RAL colors at extra cost ----Information: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: Cgsdpsl Tilxofx Ahuen * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2001, Oprema: ABS, Vehicle identification number: WMM0000010046004 Unladen weight: 8,400 kg German roadworthiness inspection (HU): due BPW Eco axles with drum brakes Leaf spring suspension Upper deck length: 2,500 mm – loading height: 1,070 mm Lower deck length: 7,200 mm – loading height: 885 mm Drawbar – 50 mm Cgjdpewwd R Isfx Ahuen Hydraulic ramps, split – length 2,000 + 1,300 mm – width 660 mm Support legs Tyres: 235/75 R 17.5 Modifications, prior sale, and errors excepted. The description serves for general vehicle identification and does not constitute a warranty in the legal sense. The contractual description as per the purchase agreement is legally binding. Our offers generally do not include a new technical inspection (TÜV certificate). If a new TÜV certificate is required, we will be pleased to provide an offer from our partner workshops. Vehicle may feature advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system Cgsdopk D D Uopfx Ahujn * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: Cjdpjpk D Dmsfx Ahusgn * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, lastna masa: 4.580 kg, največja dovoljena obremenitev: 13.420 kg, skupna masa: 18.000 kg, prva registracija: 07/2019, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: na poti / v tranzitu, 2 osi, BPW osi, tandem, zračno vzmetenje, dviganje in spuščanje, ABS (protiblokirni sistem), vezni obroči, možnost namestitve naletnih ramp, zadnja podpora, dvojna montaža pnevmatik, škatla za orodje, nastavljiva vlečna ojica po višini, snemljive stranske stranice. Codpfsx N A Aysx Ahusgn Nadgradnja: aluminijaste stranske stranice, ki so lahko zložljive in snemljive, zložljivi vogalni in sredinski stebri, 50 mm vlečna ušesa, predal za rampe, pocinkan okvir, vogalni in sredinski stebri snemljivi, rampe na voljo za doplačilo 1.000 €, možno tudi s primernim vozilom (89076). Podatki so nezavezujoči, saj je vozilo v tranzitu! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane!

Stanje: rabljeno, največja dovoljena obremenitev: 23.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1992, dolžina tovornega prostora: 9.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.450 mm, Leto izdelave: 1992, Oprema: ABS, WhatsApp MÜLLER MITTELTAL Low Loader Trailer T 3 24.0 (30.0) Gross permissible weight: 24,000 kg (technical: 30,000 kg) Empty weight: 6,750 kg Payload: 23,250 kg Equipment/features: - One-piece loading ramps (approx. 2,600 x 700 mm), laterally adjustable - Loading area above the turntable: approx. 3,100 x 2,480 mm (loading height 1,000 mm) - Loading height unladen: approx. 900 mm - Rear loading area: approx. 5,600 x 2,500 mm - Steel plate covering in the rear area, bolted to wooden floor: 1,500 x 750 mm - Ramp lifter with tension spring - 4S3M WABCO ABS - Manual spindle handbrake - SAF drum brake axles, 3 x 10 t - Parabolic suspension, mechanical rear axle compensation - 12-fold radial tyres, size 235/75R17.5 (approx. 50–80%) - Side underrun protection - Without widening kit - Lighting system 24V - Swing-down supports at rear ramps - Drawbar/towing fork with 50 mm towing eye and adjustable height via draw spring and tensioner - Spare drawbar/towing fork with 40 mm towing eye, supplied separately - 7+7 pin trailer power connector Cgsdpfx Ahoxz Uuisuen - Various lashing rings left & right (see photos) - Paintwork RAL 2001 red-orange - Tyre condition approx. 85% - Condition: GOOD for its age and mileage! All information without guarantee! PLEASE NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polish, Romanian, Russian, English,

Stanje: rabljeno, številka stroja/vozila: 217, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 5.300 mm, barva: oranžna, Oprema: ABS, Drum brake Csdpjnh Rzysfx Ahuogn Subject to errors and omissions