Stas Agrostar Polpriklopniki nakup rabljenega (115)

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 05/2008, prostornina tovornega prostora: 56 m³, skupna dolžina: 11.510 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.570 mm, barva: bela, Leto izdelave: 2008, Oprema: ABS, = Additional options and equipment = - 2x grain slides - ALU chassis - EBS - Lift axle - Steering axle - Air suspension - Disc brakes - Central lubrication system = Remarks = Many parts renewed, 4 new tyres, new periodic inspection (APK) – immediately operational Stas 56m3 tipper Year of manufacture: 2008 Capacity: 56m3 Tailgate – door combination 9-ton axles, disc brakes Axle 1: lift axle Axles 2+3: forced steering Cover tarpaulin ABS/EBS Very good condition Inspection valid until 07/2025 = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle brand: Mercedes Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Max. axle load: 9,000 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 3: Max. axle load: 9,000 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100% Weights Hedpfx Ast T T S Ref Aoi Unladen weight: 7,700 kg Payload: 31,300 kg Gross vehicle weight: 39,000 kg Functional Tipper: rear unloading Condition Technical condition: very good Visual condition: very good Identification Registration number: OV-11-KN = Company information = Interested in financing this vehicle? No problem. We can quickly arrange an attractive leasing finance agreement for you with terms of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 04/2018, prostornina tovornega prostora: 58 m³, skupna dolžina: 11.500 mm, skupna širina: 2.550 mm, skupna višina: 3.830 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.710 mm, barva: rdeča, Leto izdelave: 2018, Oprema: ABS, = Additional Options and Accessories = - 2x grain discharge slides - Alcoa Dura-Bright wheels - Alloy wheels - EBS (Electronic Braking System) - Rear doors - Grain slides - LED lights - LED work lights - Light-alloy rims - Steering axle - Air suspension - Sliding tarpaulin cover - SAF axles - Disc brakes - Toolbox = Notes = Stas S300CX Year: 04-2018 AS-3 steering axle 58m³ Alcoa Dura-Bright rims 2 grain hatches Wabco Smartboard Storage box LED lighting NL Trailer MOT/TUV valid until 20-08-2026 = Further Information = Axle configuration: Tyre size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminium rims; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Aluminium rims; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 3: Aluminium rims; Max. axle load: 9,000 kg; Steered; Tyre tread left: 90%; Tyre tread right: 90% Weights: Unladen weight: 6,370 kg Payload: 32,630 kg Gross vehicle weight: 39,000 kg Functionality: Tipping: Rear Hodpfx Afeynanps Aoi Maintenance: MOT (Technical Inspection): valid until 08/2026 Condition: Technical condition: very good Visual condition: very good Damages: none Identification: Registration number: OR-05-GZ Further information: Please contact John Hesselink or Christel Hesselink for more information. = Company Information = Would you like to finance this vehicle? No problem. We can arrange a fast, favourable finance lease contract for you with terms of 12, 24, 36, 48, or 60 months. You can find all photos and further information at or contact us directly.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 04/2018, prostornina tovornega prostora: 58 m³, skupna dolžina: 11.500 mm, skupna širina: 2.550 mm, skupna višina: 3.830 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.710 mm, barva: rdeča, Leto izdelave: 2018, Oprema: ABS, = Additional Options and Equipment = - 2x grain hatches - Alcoa Dura-Bright wheels - Alloy rims - EBS - Rear doors - Grain hatches - LED lights - LED work lights - Light alloy rims - Steering axle - Air suspension - Rolling tarpaulin cover - SAF axles - Disc brakes - Toolbox = Notes = Stas S300CX Year of manufacture: 04/2018 58m3 AS-3 steering axle Alcoa Dura-Bright rims 2 grain slides Wabco Smartboard Storage box LED lighting Spare wheel carrier Internal dimensions: L:1120 cm W:247 cm H:212 cm NL Trailer Inspection/Technische Hauptuntersuchung (APK/TÜV): 27-08-2026 = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 60% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 80% Hsdpfxeyml R Ts Af Aji Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Steered; Tyre tread left: 80%; Tyre tread right: 60% Weights Curb weight: 6,370 kg Payload: 32,630 kg GVW: 39,000 kg Functionality Tipper: Rear Maintenance APK (Technical inspection): valid until 08/2026 Condition Technical condition: very good Visual condition: very good Damages: none Identification Registration: OR-04-GZ Further Information Please contact John Hesselink or Christel Hesselink for more information. = Company Information = Looking to finance this vehicle? No problem. We can quickly arrange a tailored finance lease agreement for you with a term of 12, 24, 36, 48, or 60 months. All photos and additional information can be found at or contact us directly.

Stanje: rabljeno, največja dovoljena obremenitev: 31.120 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2011, naslednji pregled (TÜV): 05/2026, Oprema: ABS, STAS Walking Floor MODEL: S 300 ZX * First registration: 04/2011 * BPW axles * Tyres approx. 50–70% * NEW technical inspection (TÜV) valid until 05/2026 * Sliding roof tarp Hjdpfxswvw A Io Af Aei * German vehicle 2 units available!

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2010, prostornina tovornega prostora: 80 m³, Leto izdelave: 2010, Oprema: ABS, 19.750 EUR neto, SAF osi, kolutne zavore, alu-alu, ponjava, francoska registracija, v dobrem stanju Hsdeynp Rtjpfx Af Aji

Stanje: zelo dobro (rabljeno), številka stroja/vozila: YA9S343A897116027, prva registracija: 05/1997, barva: drugo, Leto izdelave: 1997, = Dodatne informacije = Lastna masa: 8.280 kg Nosilnost: 25.720 kg Hedpfxjympz Ns Af Asi Skupna masa: 34.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2005, prostornina tovornega prostora: 80 m³, Leto izdelave: 2005, Oprema: ABS, 15.750 EUR neto, SAF osi, kolutne zavore, alu-alu, ponjava, francoski dokumenti, v dobrem stanju Hsdpfxeymuplj Af Aji

Stanje: rabljeno, največja dovoljena obremenitev: 31.560 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2018, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.250 mm, prostornina tovornega prostora: 56 m³, Leto izdelave: 2018, Oprema: ABS, Stock no. 5731 Approx. 56 m³ Stas Steel Tipper Trailer / Hardox / Aluminum Rims / Vibrator ---- * Manufacturer: Stas * Model: S300CX * First registration: 11/2018 * Gross weight: 39,000 kg * Unladen weight (as per registration): 7,440 kg * Payload: 31,560 kg * Suspension: Air suspension with raising and lowering function * Axles: 3 x Jost with lifting axles on 1st and 3rd / disc brakes * Tyres: 385/65 R 22.5 approx. 50% on aluminum rims * EBS Wabco * Inspection (TÜV): 10/2026 Hodpsymirhsfx Af Aei * Colour: Chassis red, tipper body blue, tarpaulin red * Volume: approx. 56 m³ (10.50 m length x 2.35 m width x 2.25 m height) * Hardox tipper body * Rear wing door with grain hatch on right side * Vibrator * Front operator platform with left-side access * Rolling tarpaulin with central locking * Aluminum tarpaulin protection * 2 crossbeams (telescopic) * Individual mudguards * Full load supports (aluminum folding support legs) * Wabco Smartboard * LED rear lights * 4 x LED work lights * LED reversing lights * PVC toolbox on left * Approx. 3.00 m aluminum ladder * Foldable A-board * Foldable underride guard German vehicle!! German documentation!! Notice regarding possible errors in this listing: Despite careful preparation, errors may occasionally occur in the text or specifications. We accept no liability for mistakes, changes, or prior sales. All information is non-binding. Please contact us to verify the details or for further questions.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2008, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.450 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, medosna razdalja: 1.310 mm, Leto izdelave: 2008, Dimenzija pnevmatik: 385/65R22.5 Vzmetenje: zračno vzmetenje Pogon: na kolesa Lastna teža: 5.130 kg Nosilnost: 32.870 kg Hsdeymfyzepfx Af Aji Skupna dovoljena masa: 38.000 kg Znamka nadgradnje: STAS Kiper: zadaj

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.450 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, medosna razdalja: 1.230 mm, Leto izdelave: 2007, Referenčna dimenzija: 385/65R22.5 Vzmetenje: zračno vzmetenje Pogon: kolo Hjdpfxeymfyus Af Aji Dovoljena skupna masa: 38.000 kg Znamka nadgradnje: STAS Kiper: zadaj

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2011, dolžina tovornega prostora: 7.585 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 27 m³, Chassis Aluminium, reinforced design Two fully automatically welded I-beam longitudinal members with welded cross-members, 1,600 mm chassis width Axles and Suspension — “430 mm Disc Brakes, Off-Road” DOA axle sets, 3 x 9 t with DC air suspension, first axle liftable with Wabco start-assist system, Wabco Smart Board, lifting and lowering valve Tyres and Wheels 6 wheels with GreBe 385/65 R 22.5 tyres, approx. 90–100% tread, mounted on ALCOA aluminium rims, 11.75x22.5 ET 120 Hedpfx Afsyi Rcte Aei Kingpin 2" bolted into a 10 mm thick plate Landing Gear With 1x aluminium single-speed drop landing leg, for uncoupling when empty Braking System In accordance with E.G. standards, dual-line Wabco system, spring-actuated parking brake acting on two axles, Wabco EBS-E system with RSS (Roll-Stability-Support), aluminium air tanks Electrical System According to StVZO regulations with 2 LED five-chamber taillight system Aspöck, 24 V system with 2x 7-pin sockets and 1x 15-pin socket, LED side marker lights, 2 separate halogen reversing lights Tipping Body / Tipper — Conical Floor Design Aluminium tipper body with trapezoidal floor and rectangular top rail, assembled and fully welded from patented profiles and aluminium sheets, side walls 4 mm thick aluminium plate 5086H24, floor 8 mm in high-abrasion-resistant alloy (5383H34), two robust top rail profiles fully welded to the side walls, front wall 20° inclined, 4 mm thick, rear wall approx. 20° inclined, designed as drop-swing tailgate in flat version without chute, double swing tailgate hinge, hinges flush with the top rail, automatically pneumatically actuated central locking with 2 locking hooks, load retainer on the body, rear tipper overhang suitable for road paver use. Hydraulics Hydraulic cylinder mounted at front wall with an operating pressure of 150 bar, including approx. 2.5 m hose and 1" quick-release coupler, tipping angle approx. 48–49° Accessories 6 Parlok mudguards, 2 “STAS” swinging mud flaps, 2 wheel chocks, robust foldable underrun protection with collision guard, 1 center chain, 1 aluminium roof bow, additional swiveling aluminium roof bow in front of the tailgate, 1 plastic toolbox, Cramaro electric sliding tarpaulin with remote control, 2 Ferry lashing eyes at the rear frame (for rope attachment), 3m aluminium ladder, internal shovel holder at front wall, nearly-new plastic wear plates on side and front walls! (Original price approx. €5,800), shovel and broom holder on left frame, etc. Unladen weight: 5,030 kg Offer and images non-binding

Stanje: rabljeno, številka stroja/vozila: YE6SZ339V600R0459, konfiguracija osi: 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, skupna dolžina: 13.950 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, = Další možnosti a příslušenství = - Hydraulika = Poznámky = Podvozek Výška podvozku: 100 cm Výška čepu/ojí: 120 cm Konstrukce Hydraulika: ✓ Nádrž Palivo: ✓ = Další informace = Konfigurace náprav Rozměr pneumatik: 385/65 R22.5 Značka náprav: Mercedes Brzdy: Kotoučové brzdy Pérování: Vzduchové pérování Náprava 1: Vzorek pneu vlevo: 65 %; Vpravo: 10 % Náprava 2: Vzorek pneu vlevo: 75 %; Vpravo: 15 % Náprava 3: Vzorek pneu vlevo: 70 %; Vpravo: 15 % Hmotnosti Provozní hmotnost: 7 960 kg Užitečné zatížení: 31 040 kg Celková hmotnost vozidla: 39 000 kg Funkčnost Značka nástavby: Stas Výška ložné plochy: 110 cm Identifikace SPZ: QAZ297 = Informace o firmě = Pro více informací o tomto vozidle volejte nebo pište e-mail: Hjdeu H Di Ispfx Af Aji Přehled celého skladu najdete na: Nezapomeňte se přihlásit k odběru našeho newsletteru – každý týden aktualizace nabídky.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2017, dolžina tovornega prostora: 13.240 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, skupna dolžina: 14.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: drugo, Leto izdelave: 2017, = Additional options and accessories = - Superstructure year of manufacture: 2017 - Rear door type: double doors - Superstructure capacity: 92 m³ (Total capacity of the superstructure.) - Material: aluminum - Floor material - Tarpaulin - Sliding wall - Door opening width: 247 cm - Door opening height: 271 cm - Winch = Further information = Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF 9 Ton Intradisc Brakes: Disc brakes Suspension: Air suspension Axle 1: Alloy rims; lift axle; left tyre tread: 20%; right tyre tread: 40% Axle 2: Alloy rims; left tyre tread: 20%; right tyre tread: 20% Hedpox Np Ucjfx Af Asi Axle 3: Alloy rims; lift axle; left tyre tread: 40%; right tyre tread: 40% Weights Unladen weight: 7,430 kg Payload: 34,570 kg Gross vehicle weight: 42,000 kg = Company information = Would you like more information about this vehicle? We recommend visiting BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • Support and services from BAS World Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Stanje: rabljeno, največja dovoljena obremenitev: 31.800 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2015, naslednji pregled (TÜV): 02/2026, prostornina tovornega prostora: 92 m³, Leto izdelave: 2015, Oprema: ABS,

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 50 m³, Chassis ALU chassis, aluminum alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminum parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability with integrated tipping bearing shaft fitted with wear-resistant special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated inside a plastic tube. Axles and Suspension Disc Brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension system, raising and lowering valve, load pressure gauge, third axle automatically liftable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread remaining, on silver steel rims, size 11.75x22.5 ET 120. Landing Legs Mechanical landing gears, load capacity 2 x 20 tonnes, with pivoting feet for use with air suspension systems. Brake System Hjdjxf Spfspfx Af Aji According to E.G. standard, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M with RSS (Roll Stability Support), ALU air reservoir. Electrical System According to StVZO regulations with 2 five-chamber Aspöck LED taillights, 24-volt system with two 7-pin and one 15-pin front sockets, EBS socket, side LED outline markers, 2 clearance lights, 2 separate LED reversing lights. Tipping Body/Tipper Body Aluminum tipper body, side walls with welded vertical aluminum profiles, approx. 6 mm floor of highly wear-resistant aluminum alloy (5383H34), Brinell HB 110, sloping front wall of 4 mm aluminum with reinforcing profiles for tipping cylinder bracket, side walls 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and wing door (2/3-1/3 split), with double hinge, made of 4 mm aluminum, single grain discharge slide with water protection, wear plates on the side approx. 400-1,000mm x 3,000mm x 4mm. Hydraulic System Hydraulic cylinder mounted on front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2m hydraulic hose and loose half 1". Accessories 6 Parlok plastic mudguards with 2 Stas mudflaps, 3 m aluminum ladder, reinforced collapsible underrun protection with 2 towing eyes, one foldable side guard, walkway on bulkhead with left-hand access ladder, 3 ALU bows with swing function, one central additional bow holder, roll tarp with central ALU tube, roll tarp system, tarp material quality approx. 660g/m², tarp fastener with quick-release catch (no tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous spray guard fitted on underrun protection, etc. Offer and pictures non-binding.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2021, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 53 m³, Chassis, Light Version Hedpoyiw T Esfx Af Aei Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width 1,600 mm. Axles and Suspension Disc brakes 430 mm, "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, centrally mounted to the chassis longitudinal beam, 1st axle with liftable air bellows, starting aid function and manual forced lowering, Smart Board info center, lowering valve, front load pressure gauge. Tyres and Wheels on Aluminum Rims 6 wheels with tires 385/65 R 22.5 approx. 50%, 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims. Kingpin 2" screwed into an 8 mm thick "light" plate Landing Legs Support winches, loadable to 2x20 t, with swiveling base for air suspension Brake System Built according to E.G. standards, dual-line Wabco system, spring-actuated parking brake affecting two axles, Wabco EBS-E with RSS (roll stability system), Wabco Smartboard Info Center, aluminum air tank system. Electrical System According to STVZO guidelines, with 3 round three-chamber lamps type Aspöck, 24V system with 2 x 7-pin and 1 x 5-pin sockets, 2 x 7 side outline markers, 2 LED reversing lamps centrally at the rear, 1 round fog lamp, 4 LED work lamps, 1 interior LED lamp, 4 red LED position lamps in the door bar. All air and electrical lines are neatly routed in plastic tubing! Tipper Body / Body “Smooth Design”, Body Interior Fully Welded Aluminum tipper body, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 8 mm high-wear-resistant alloy (5383H34/HB 110) with 90-degree profile to the side wall. Front wall 4 mm reinforced, straight design. Tailgate as universal door, straight version, with two half-and-half swing doors and grain chute. Universal door operated automatically-pneumatically, lockable via separate lever, rear portal in aluminum, swing-away, two hold-downs with rubber buffers on the tipper body, fixed to the front wall. Hydraulics, Tipping Cylinder with “Sleeve” Suspension Hydraulic cylinder mounted on the front wall, working pressure 150 bar, Edbro make, with approx. 2.5 m hydraulic hose and quick coupling 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete splash flaps across full vehicle width mounted on underrun protection, no aluminum spare wheel holder, side underrun protection right, foldable version, large toolbox type 860, approx. 3 m aluminum ladder, 3 aluminum swing bars mid, approx. 150 mm raised with additional middle support, roll tarp with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality, roll tarp system with fast tension closure, surrounding rubber cord at rear edge of tarp with two catch hooks to be fixed on the rear swing bar, catwalk on frame, tarp closure at rear with welded-in rubber cord for water ingress protection, robust foldable underrun protection, 2 "Clear-Pass" mud flaps to EG standard mounted on mudguards, side-mounted on the frame an aluminum grain funnel with drawstring bag, brackets for shovel, broom, and scraper mounted over axles, etc… Unladen weight: 5,950 kg Offer and images subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 10.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 50 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension, Disc brakes 430 mm “off-road version” SAF-Intradisc axle units 3 x 9 t with SAF air suspension, airbags centrally positioned to chassis longitudinal beam, 1st axle liftable with start-up aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, 3rd axle with trailing steering, electrically lockable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 40-50% tread, with Alcoa "satin" aluminium rims 11.75 x 22.5 ET 120, UNI wheel bolts for aluminium rims. Landing Legs Mechanical version, single-side operation with two speeds, swing foot for air suspension, 2x20t support load. Braking System According to EU standard, two-line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability-System), Wabco Smartboard Infocenter, aluminium air reservoir system. Electrical System According to German Road Traffic Licensing Regulations (StVZO), with two five-chamber lamps type Aspöck Ecopoint 2, 24V system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines are neatly routed in plastic conduit. Tipping Body / Tipper Body, Inside Fully Welded Aluminium tipper body, sidewalls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded. Floor 8 mm wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight; rear wall double-leaf door, straight, with two doors in 1/2-1/2 design, each with a grain chute. Air vibrators under the floor with pneumatic operation, rear spreader made from aluminium, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System, Tipping Cylinder with “Cardan” Suspension, 7,630 mm lift Hydraulic cylinder mounted on front wall, working pressure 220 bar, brand Hyva, 220 bar, approx. 2.5 m hydraulic hose and loose 1" half coupling, tipping angle approx. 48 degrees. Hodpfx Asxf Sn Iof Aei Accessories 6 Parlok mudguards, full-width spray flaps on underrun bar, ALU spare wheel holder, foldable right side underrun protection, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swinging bows, raised approx. 150 mm in centre, tarpaulin with central light strip and separate reinforcement in wear areas, approx. 660 g/m2 quality, with rolling tarpaulin system, circumferential rubber cord at rear closure with two tension hooks to be fixed to rear swing bow, walkway at tipper body with access on left, side tarpaulin closure with tension straps, rear tarpaulin closure with welded-in rubber cord for water protection, robust foldable aluminium underrun protection with two towing eyes left & right incl. locking pins, 2 “Clear-Pass” mud flaps on wheel arch to EU standard, etc. Offer and photos subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and suspension Disc brakes 430 mm "off-road version" SAF-Intradisc light axle assemblies 3 x 9 t with SAF air suspension, central-positioned air bellows on chassis longitudinal member, 3rd axle liftable with starting aid and manual forced lowering, Smart Board info center, lift-lower valve, BVA brake wear indicator Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70 % remaining tread, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" – screwed into an 8 mm thick plate Landing gear Mechanical landing legs with 2 speeds, 2x20t support load, with swing foot for air suspension, Brake system According to E.E.C. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-stability-system), Wabco Smartboard Info Center, aluminium air reservoir system Hedpsyiw T Ssfx Af Aji Electrical system According to German Road Traffic Licensing Regulations (StVZO) with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipper body/smooth body design, interior fully welded Aluminium tipper body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 6 mm thick high-wear-resistant alloy (5383H34/HB 110), with 45-degree angled profile to side wall. Front wall 4 mm, reinforced, angled design. Rear wall as universal door in straight design, with two-leaf doors (2/3-1/3 split) and one grain slide, ALU round profile welded to seal the door gap on the rear doors, side and bottom. Rear doors partly covered with smooth aluminium sheeting. Universal door operation is automatic-pneumatic with separate lever lock, rear swing bar in aluminium, two hold-downs with rubber buffer fixed to the tipper body at the bulkhead. Hydraulic system Tipping cylinder with "Rotulen"-mounting (light) Hydraulic cylinder mounted at the front wall with 150 bar working pressure, brand Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across the entire vehicle width fixed to underrun protection, no spare wheel holder (aluminium), foldable side underrun guard (right), large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing bows approx. 150 mm raised in the centre, an additional centrally mounted bow holder for positioning in total 2 bows to increase loading width, rolling tarpaulin with central light strip and separate reinforcements in wear areas, 660 g/m2 quality with rolling tarp system, all-around elastic rope on rear closure of tarpaulin with two hooks fixed to the swing bow at rear, catwalk on chassis in chassis colour with steps left and right, side tarp closure with quick lock, rear tarp closure with welded elastic rope for water resistance, robust foldable underrun guard in aluminium, 2 "Clear Pass" mud flaps at mudguard to EC standard, side-mounted on frame one aluminium grain funnel with sack, brackets for shovel, broom and scraper mounted above axles, etc. Curb weight: 5,960 kg Offer and images non-binding

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2013, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, barva: drugo, Leto izdelave: 2013, Oprema: ABS, = Druge možnosti in dodatki = - Zračno vzmetenje = Dodatne informacije = Hedpfjyk A Taox Af Asi Konfiguracija osi Dimenzija pnevmatik: 385/65/22.5 Znamka osi: SAF Zavorni sistem: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: LM platišča Zadnja os 2: LM platišča Zadnja os 3: LM platišča Teže Lastna teža: 5.530 kg Nosilnost: 33.470 kg Dovoljena skupna masa: 39.000 kg Vzdrževanje, zgodovina in stanje APK (Tehnični pregled): veljaven do 10.2026 Poškodbe: nobene Identifikacija Registrska številka: QALH523

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2021, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.675 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured in self-supporting aluminium construction with corresponding reinforcements in the lower chord for particularly high stability and strength, aggregate chassis made of aluminium, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies 3 x 9 tons with DC air suspension, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with start-up aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, on Alcoa aluminium rims satin, 11.75x22.5 ET120 Landing Gear Hodpfxexuy I Ie Af Aei Aluminium drop-leg landing gear, manufacturer: Alu Leg, with 2x10 t static load capacity, for air suspension we use swivel feet Brake System According to E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminium air tank system, premium modulator Electrical System In accordance with German road traffic regulations (StVZO) with 2 LED five-chamber lights type Aspöck Europoint III integrated in the aluminium rear closure, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the sides at the height of the landing gear, 1 LED work light inside front left operable from outside Body/Tipper Body "body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2-3 mm), 600 mm wide, completely welded in with lower and upper chord, plank profiles fully welded on the inside!!, floor as moving floor system laid on 140 mm aluminium crossmembers, crossmembers closely mounted (approx. 350 mm), aluminium front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminium corner profiles in bevelled design, smooth rear wall in straight design with 2 aluminium swing doors 50/30 mm thick with 4 locking rods, welded into aluminium rear frame mounted in Teflon and inox bearings, travelling side wall suspended in reinforced aluminium upper chord with "Kevlar tarpaulin" for complete emptying, side brush sealing and additional Kevlar tarpaulin, integrated grain hopper with cover plate, operable from outside with inspection window rear left, 2 sample slides in the rear doors Hydraulic System "Cargo Floor" 24-board system Moving floor system installed in the floor with hydraulically actuated aluminium profiles on aluminium square profiles, mounted on approx. 880 PE-HD sliders, approx. 6 mm smooth floor, hydraulic stroke approx. 200 mm, fixed halves on front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 - max. 240 bar, aluminium end pieces welded into the floor, operation rear left with radio control in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguards with rubber flaps, aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 toolbox approx. 800x460x430 mm in plastic, approx. 3.7 m aluminium ladder, roll tarpaulin 680 g/m² quality with roll tarpaulin system including side quick release via tarpaulin

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Hedpsyh S Aijfx Af Aji Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Hedpofi Nmwofx Af Aoi Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2022, dolžina tovornega prostora: 12.440 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.270 mm, skupna dolžina: 13.480 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: siv, Leto izdelave: 2022, = Further options and equipment = - Body capacity: 69 m³ (Total capacity of the body) - Material: aluminium - Tarpaulin = Further information = Axle configuration Tire size: 385/65R22.5 Axle make: SAF 9 Ton CD (Off-Road) Brakes: Disc brakes Suspension: Air suspension Axle 1: Alloy rims; Lift axle; Tire tread left: 40%; Tire tread right: 40% Axle 2: Alloy rims; Tire tread left: 20%; Tire tread right: 20% Hodpsx E Artjfx Af Asi Axle 3: Alloy rims; Lift axle; Tire tread left: 70%; Tire tread right: 60% Weights Unladen weight: 7,440 kg Payload: 31,560 kg GVW: 39,000 kg = Company information = Would you like more information about this vehicle? We recommend visiting BAS World, where you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • Support and services from BAS World Would you like to learn more? Visit BAS World online! España (ES) We speak 17 languages, so we can always assist you in your own language. Feel free to contact us directly. Our Spanish-speaking staff will be happy to help you! Deutschland (DE) We speak 17 languages, so we can always help you in your own language. Please feel free to contact us directly. Our German staff is happy to assist you! France (FR) We speak 17 languages, so that we can always help you in your own language. Do not hesitate to contact us directly. Our French colleague will be happy to assist you! Portugal (PT) We speak 17 languages, so we can always help you in your own language. Don't hesitate to contact us directly. Our Portuguese staff will be pleased to assist you! Italia (IT) We speak 17 languages, so we can always assist you in your language. Do not hesitate to contact us directly. Our Italian colleague will be happy to help you!

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering function Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL. Hodpfxjxriu Ej Af Aoi

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, Leto izdelave: 2023, Oprema: ABS, Besuchen Sie unsere Webseite, auf der Sie unseren vollständigen Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 8346 STAS S3000ZX deutsche Zulassung / 1. Hand Erstzulassung: 06.02.2023 Hsdpeygp Ivefx Af Asi Baujahr: 2023 Techn. zul. Gesamtgewicht (kg): 42.000 Zulässiges Gesamtgewicht (kg): 42.000 Leergewicht (kg): 7.990 FIN: YE6S300ZXN0009 HU gültig bis: 03.2026 BEREIFUNG UND ACHSEN: Bereifung: 385/65 R 22,5 Achskonfiguration: 3 Achsen Jost Luftfederung Scheibenbremsen AUFBAU Innenmaße: Höhe (m): 2,81 (2,67) Breite (m): 2,48 Länge (m): 13,50 WEITERE AUSSTATTUNG: Portaltüren FAHRZEUGDOKUMENTE: Zulassungsbescheinigung Teil I Zulassungsbescheinigung Teil II COC-Papiere M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainisch, Russisch Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Trotz größtmöglicher Sorgfalt können wir keine Haftung für eventuelle Fehler oder Auslassungen übernehmen. Wir bitten unsere Kunden, die zur Verfügung gestellten Fotos zu beachten. Alle angegebenen Maße sind circa Angaben. Unsere Fahrzeuge werden im vorhandenen Zustand verkauft. Wir laden Kunden ein, unsere Firma zu besuchen und das Fahrzeug persönlich zu begutachten. Probefahrten sind möglich. Bitte beachten Sie, dass die mitgelieferten Batterien dem aktuell verbauten Zustand entsprechen. Falls neue Batterien gewünscht werden, stehen wir Ihnen für Preisinformationen gerne zur Verfügung.