Stas Odprta Platforma nakup rabljenega (113)

Stanje: rabljeno, največja dovoljena obremenitev: 32.447 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 08/2023, single owner Mileage only 131,590 km Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Continuous 5 mm Hardox HB450 steel floor Front and side walls made of 3 mm Hardox HB450 steel Pneumatically folding rear underrun protection Straight front wall with internal access ladder Rear portal doors 50:50, pneumatic remote unlocking Reinforced sliding roof tarpaulin HYVA tipping cylinder, type Alpha, low-pressure 2x pneumatic vibrators Pgedoy U A R Iopfx Ai Rsl JOST crank landing legs, full load capacity SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer-EBS with RSS (Roll Stability Support) WABCO SmartBoard Lift and lowering mechanism Automatic tipping lowering function 6x 385/55 R 22.5 tyres ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING – available immediately as full-service rental as well

Stanje: rabljeno, največja dovoljena obremenitev: 33.910 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2025, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.737 mm, prostornina tovornega prostora: 91 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, 3-axle STAS walking floor semi-trailer 91.5 m³ NEW VEHICLE, unused First registration 11/2025 Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Fifth wheel height: 1,150 to 1,180 mm Chassis: steel, hot-dip galvanized SAF axles with large disc brakes 430 mm, reinforced version "CD" WABCO trailer EBS with rollover stability support RSS WABCO Smartboard with axle load indicator 1st axle: lift axle 3rd axle: steering axle Air tanks: aluminium Podpfx Ajyih R Sji Rsgl Tyres: 6 x 385/65 R 22.5 JOST heavy-duty landing legs with crank ASPÖCK full LED lighting 4 x LED work lights Toolbox rear left Side wall profile seams fully welded from inside CARGOFLOOR walking floor with 21 slats, material thickness 10 mm, grooved Control via RADIO REMOTE CONTROL Rear end plate made of stainless steel 3 cross beams, reinforced waste version Roll-over roof tarp, reinforced Panama 900 g 12 pairs of lashing rings in the floor Cleaning door in the front wall Rear cross beam can be swung, can be unlocked from below – ideal for transporting bales RENTING is the new BUYING – available immediately as FULL-SERVICE-RENTAL.

Stanje: rabljeno, največja dovoljena obremenitev: 34.120 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.737 mm, prostornina tovornega prostora: 88 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2024, Oprema: ABS, 3-axle STAS Walking Floor semi-trailer 88 cbm First registration 07/2024, single owner Mileage only 69,324 km Internal dimensions (LxWxH): 13,513 x 2,475 x 2,536 / 2,752 mm >>> Coupling height: 1,200 to 1,250 mm Axle spacing: 1,310 mm Unladen weight: 7,880 kg Chassis made of hot-dip galvanized steel SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with RSS anti-skid system WABCO smartboard with axle load display >>> 1st and 3rd axle are lift axles >>> WABCO OptiTurn steering system for reduced turning radius Aluminium air tanks Tyres: 6 x 385/65 R 22.5 JOST full-load landing gear Lighting: ASPÖCK full LED 4 x LED work lights Toolbox on rear left Side wall profile joints inside fully welded CARGOFLOOR moving floor with 21 slats, 10 mm ribbed material thickness >>> With floor reinforcement for forklift operation and full-length slide bearings Control via remote radio control Pgsdjy S Nqcjpfx Ai Rjl Rear end plate made of stainless steel 2 stakes, reinforced waste-design execution Reinforced rolling roof tarpaulin >>> Rear cross bar swivels, operable from the ground With grain hatch in the left door wing RENTING is the new BUYING – also available from us immediately in FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 35.000 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 12.213 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 70 m³, skupna širina: 2.550 mm, skupna višina: 3.856 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle AGRICULTURAL Walking Floor Semi-Trailer, 70 cbm First registration 05/2024, in like-new condition Internal dimensions (LxWxH): 12,213 x 2,475 x 2,300 mm Volume: approx. 70 cbm Unladen weight: only 7,010 kg Pgsdpfx Aiev Dz Ixs Rel Fifth wheel height: approx. 1,250 - 1,300 mm Total height: approx. 3,850 mm Short aluminium chassis over the axles SAF axles with large disc brakes, 430 mm, heavy-duty "Off-Road" version Wabco trailer EBS with RSS stability system 1st axle: LIFT AXLE 3rd axle: Steering axle Tyres: 6 x 385/65 R 22.5 ALU drop-leg supports, full load (2x 10 t.) 4x LED work lights Cargofloor moving floor, agricultural version with 15 boards, 6 mm smooth Aluminium end caps, welded RADIO remote control Side wall panels fully welded (grain version) Rear portal cross member, top section swivels Hydraulic connections at top and additionally at the bottom of the landing legs Roof crossmembers, reinforced, galvanised Integrated grain discharge hopper at rear, outlet opening facing downwards, operated from the side RENTING is the new BUYING – also available from us with full-service rental.

Stanje: rabljeno, lastna masa: 7.840 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, višina nakladalnega prostora: 13.500 mm, prostornina tovornega prostora: 91 m³, skupna dolžina: 24.750 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, STAS 3-osna polprikolica z gibajočim dnom, aluminijasta platišča, SAF osi, kolutne zavore, lastna teža 7.840 kg. Prodaja izključno podjetnikom, brez kakršnega koli jamstva. Pridržujemo si pravico do napak in vmesne prodaje. Podpjy Txypofx Ai Regl

Stanje: rabljeno, lastna masa: 7.710 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2016, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 13.500 mm, prostornina tovornega prostora: 91 m³, velikost pnevmatike: 385/65 R 22,5, STAS Walkingfloor, aluminijasta platišča, dvižna os, kolutne zavore, ABS, EBS. Lastna teža: 7.710 kg. Prodaja izključno pravnim osebam, brez kakršnekoli garancije. Pridržujemo si pravico do napak in predhodne prodaje. Pgsdpfx Aiey Txyve Rsl

Stanje: zelo dobro (rabljeno), lastna masa: 7.580 kg, največja dovoljena obremenitev: 27.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 3): 36.000 kg, dolžina tovornega prostora: 13.513 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.821 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.475 mm, skupna višina: 3.900 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/ R22,50, stanje pnevmatik: 70 odstotek, medosna razdalja: 1.310 mm, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2021, Oprema: ABS, ZU VERKAUFEN – STAS Fahrgestellauflieger mit Schubboden, Baujahre 2019–2021. Die Auflieger wurden ausschließlich im internationalen Fernverkehr eingesetzt und regelmäßig gewartet. Kein Einsatz im schweren Baubetrieb. Fahrzeuge sind gepflegt und sofort einsatzbereit – Verkauf erfolgt ausschließlich wegen Flottenumstellung auf neue Einheiten. Ausstattung: - Fassungsvermögen: 92 m³ - Boden: 7 mm, Hardox-Verschleißfestigkeit 10 mm - JOST Achsen - Komplett aus Aluminium gefertigt - Silber Metallic Lackierung - Reifenprofil 70–80 % - Technisch und optisch sehr guter Zustand - Kein Investitionsbedarf - Sofort einsatzbereit Pgedpfoy U Ic Asx Ai Rsl Die Auflieger sind nicht ausgelastet oder verschlissen; sie wurden von einem etablierten Transportunternehmen auf internationalen Strecken genutzt. Exportverkauf möglich.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.600 kg, največja dovoljena obremenitev: 27.300 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.364 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 60 m³, skupna širina: 2.470 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/ R22,50, stanje pnevmatik: 70 odstotek, medosna razdalja: 1.310 mm, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2020, Oprema: ABS, Na prodaj prekucniki znamke STAS, letnik 2019–2021, prostornina 60 m3. Prikolice so delale v mednarodnem transportu, uporabljene pri enem podjetju, redno servisirane in odlično vzdrževane. Specifikacija: - prostornina 60 m3 - aluminijasta konstrukcija - barva srebrna kovinska Pedpfxjy U H Ahe Ai Rsgl - žitna vratca - aluminijasta platišča - ohranjenost pnevmatik okoli 70% - pripravljene za delo - brez dodatnih vlaganj - zelo dobro tehnično in vizualno stanje Prodaja izključno zaradi obnove voznega parka.

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2025, prostornina tovornega prostora: 100 m³, Leto izdelave: 2023, Oprema: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR – STEERED AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross Vehicle Weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Exact fifth wheel height is 1,150 mm. AXLES: Tridem axle set. Manufacturer: SAF – CUSTOM DESIGN (CD). Capacity: 3 x 9 t. Suspension: Original SAF air suspension. Brakes: Large disc brakes. Rim offset: ET 120. Wear indicator: with. First axle is an automatic lift axle controlled by the EBS-E system. The third axle is a trailing steer axle. Connection: BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID: The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lift and lower function. Aluminium air tank. STEERING AXLE LOCKING: Trailing steering axle locking is achieved as follows: – via reverse lights – with a button in the truck (truck equipment not included). TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: EBS-E system WABCO 2S/2M – PREMIUM MODULATOR. Two-line compressed air brake system according to CE directives. Spring-loaded parking brake on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING – ASPÖCK: 24 volt electrical system. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck light set. Orange LED side marker lights mounted on trailer side. Without rear distribution box – NORDIC. REAR LIGHTS IN UNDERRUN PROTECTION: Lighting is mounted in fixed aluminium underrun guard. With foldable aluminium light protection cover. 2 x 1 five-chamber lights – EUROPOINT III – LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection below the body ahead of the landing legs. ACCESSORIES EXTENDABLE LADDER REAR: Extendable ladder integrated at the rear of the vehicle (right-hand side). PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm). SPARE WHEEL HOLDER: Aluminium single spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminium plank profiles. INTERIOR SEALING BETWEEN FLOOR AND FRONT WALL: Fixed seal between floor and front wall using aluminium profile and PVC seal. SIDE WALLS: Smooth finish inside and out. Double-walled side wall profiles: 600 mm wide, 30 mm thick, 3 mm inner, 2 mm outer (grain version). Side wall profiles are continuously welded on the inside. WEAR PLATE: Wear plate in aluminium, rectangular, at rear inside, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electronic control. 21-board floor system. Drive segment comprises 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear stainless steel end plate. FLOOR OPERATION: E-control – Electric with radio remote control (original Cargo Floor). Loading – stop – unloading via switch. Manual emergency operation via unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 ribbed aluminium floor boards – 8 mm thick with welded aluminium end caps. Pgjdpfexplxzox Ai Rel REAR DOOR: 2 portal doors ...

Stanje: rabljeno, največja dovoljena obremenitev: 30.060 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 9.665 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 9.665 mm, prostornina tovornega prostora: 51 m³, Leto izdelave: 2024, Oprema: ABS, Last king pin National 12t Axle load National 8t Axle spacing 1310-1310 mm Saddle height 1150 mm Chassis width 1400 mm Internal height front 2165 mm Internal height rear 2165 mm Overall width 2550 mm Wheelbase 6800 mm Overall length 10656 mm Chassis material Aluminium Tyres 385/65R22.5 Loading length 9665 mm Axles SAF Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle With lift axle and starting aid Activation of starting aid Via push button in the truck (mounting of button not included in scope of supply) and by operating the brake pedal three times Brake pad wear indicator Not connected Tyre inflation system (Tire Pilot) Without Tyre pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift and lower valve Lowering of air suspension Automatic lowering of air suspension during tipping, can be manually locked via smartboard and a switch on the chassis Pneumatic coupling head European palm coupling Wheel nut caps Chrome with STAS logo Landing legs Aluminium drop support legs mounted at the front of the chassis, operated individually from both sides, support capacity 20t / P Underrun protection operation Manual Tow eye Once, in driving direction Mud flaps underrun protection Black with STAS logo Cover underrun protection Handle underrun protection With Control console EBS operation In direction of travel, in front of axles Tool box position In direction of travel to the left, in front of axles, plastic Tool box dimension - Left in front of axles 860x520x500 Mudguard type Domar STAS with white line Number of mud flaps on mudguard 2x Mud flap type mudguard Clear Pass Lighting manufacturer Aspöck Lighting type ECOLED II Work lights (operated by switch) With Position work lights (operated by switch) 2x LED reversing lights in front, to the left and right in direction of travel, in the area of the landing legs Tipper cylinder brand Hyva Tipper cylinder type Hydraulic cylinder with large casing Tipper cylinder model Hyva - FC 169 Tipper cylinder stroke 7130 Tipper cylinder max. pressure 250 Surface treatment of cylinder stages Standard surface treatment Hydraulic coupling Rotating coupling Hydraulic coupling - size 1 Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminium leaning ladder 3 m Leaning ladder mounting for rear access With hooks for hanging Position broom and shovel holder 3 holders each, on chassis to the left in direction of travel Loading pressure gauge Ø 100 mm - mounted at the front on the chassis With two plastic wheel chocks including mount Body support device Chassis - Body Rubber stops Air and electrical console Centrally in direction of travel with gallows Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type Combination door Internal lower belt profile inclination (°) 90 Floor 8 mm ALU - 110 Brinell Position rubber pads below floor crossmembers Front wall 4 mm (Alu) Profile side wall 3 mm - 2 mm smooth finish inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall Alu Combination door type 1/2 - 1/2 with swivelling upper crossbar Door leaf opening Right door leaf opens first (STAS manufacturer choice) Upper crossbar Swivelling version Hinge type With double door hinge (double-joint hinge) Pgodeuar Amepfx Ai Rjl Slider Rectangular design, standard Slider position 2 pieces, with control handle, 1 each to left and right in direction of travel Securing of open door leaves By chain Rear wall seal With standard rubber seal

Stanje: rabljeno, največja dovoljena obremenitev: 29.990 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, prostornina tovornega prostora: 52 m³, skupna širina: 2.550 mm, Leto izdelave: 2024, Oprema: ABS, Type of chassis: V-chassis King pin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Techn. perm. gross weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Total length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Load length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer’s choice) Offset (ET): 120 Option 1st axle: with lift axle and starting aid Activation of starting aid via button in the truck (button installation not included in standard equipment) and by operating the brake pedal three times Option 3rd axle: with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator: connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping, manually lockable via Smartboard and switch on chassis Coupling head: Pneumatic European palm coupling Tire brand: Manufacturer’s choice Rims: Alcoa Dura Bright Tire type: Regional application Wheel nuts: Open Wheel nut covers: Chrome with STAS logo Landing legs: Weweler steel gear landing legs, type Weweler, with compensating feet, single-sided operation and 2 speed stages Underrun protection operation: manual Spray flap underrun protection: Black with STAS logo, mounted across the entire width of the underrun guard Fixation of spray flap underrun protection: fixed Underrun protection cover: with covers Pgsdpeupqi Eofx Ai Rjl Grip on underrun protection Control console EBS operation: On driver’s side, before the axles Toolbox Position toolbox: On driver’s side, before the axles Material toolbox, driver’s side, before axles: Plastic Toolbox dimensions, driver’s side, before axles: 860x520x500 mm Mudguard type: Domar STAS with white stripe Number of mudguard spray flaps: 2 pieces Mudguard spray flap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (actuation via switch): 2 pieces LED reversing lights at rear on driver’s side and passenger side, mounted on last cross member of frame (controlled via reversing signal) Work light position (actuation via switch): 2 pieces LED reversing lights at the front on driver’s and passenger’s side, mounted in area of the landing legs Tipping cylinder manufacturer: Hyva (STAS manufacturer’s choice) Tipping cylinder type: Hydraulic cylinder, large casing Cylinder tipping angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Surface finish of cylinder stages: Standard Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: On driver’s side, on lamp carrier Aluminium access ladder 3 m - passenger side Fixing access ladder for rear entry with hook for hanging Broom and shovel holder with 3 brackets each, mounted on driver’s side of chassis Two plastic wheel chocks incl. holder Locking device chassis-superstructure: Rubber stoppers (not for FSS 74 and 86) Air and electric console: Mounted on passenger side Body A-board on trough (not foldable) - right side (Note: incomplete entry - 'Neigu...' likely cut off)

Stanje: rabljeno, največja dovoljena obremenitev: 34.900 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2021, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.280 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.861 mm, Leto izdelave: 2021, Oprema: ABS, STAS 3-osovinski Hardox čelični kiper 55 cbm "AGRAR-LINER" Prva registracija 04/2021 Pređena kilometraža 203.910 km Dimenzije unutrašnjosti (D x Š x V): 10.000 x 2.350/2.450 x 2.280 mm (konusni oblik) Sopstvena težina samo 7.100 kg Šasija u obliku slova Z, savijena izvedba Pod celom dužinom od 3 mm Hardox čelika HB450 Prednji i bočni zidovi od 3 mm Hardox čelika HB450 Pgsdpfx Aey Nvrzji Rsl Kosi prednji zid, unutrašnji pristup sa stepeništem Jednokrilna ALU kombinovana vrata s klatnom funkcijom, pneumatsko odvajanje 1 komad klizni otvor za žito Krovna rolo cerada, ojačana izvedba HYVA kiper cilindar tip Alpha, pogodan za visok i nizak pritisak ALU sedlaste noge za potpuni teret 2x vazdušna vibratora ispod nadogradnje SAF osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO prikolica-EBS sa zaštitom od prevrtanja RSS WABCO Smartboard Uređaj za podizanje i spuštanje Pneumatici 385/65 R 22.5 Aluminijumske merdevine za pristup Držač za lopatu i metlu Kutija za alat sa desne strane 4x LED svetla za vožnju unazad IZNAJMLJIVANJE je nova KUPVINA, kod nas odmah dostupno i u FULL-SERVICE najmu-----

Stanje: rabljeno, lastna masa: 6.580 kg, največja dovoljena obremenitev: 29.420 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2001, prostornina tovornega prostora: 45 m³, velikost pnevmatike: 385/65R22,5, STAS S3-SA336K 3-osna kesonska prikolica, aluminijasta platišča, dimenzija pnevmatik 385/65 R22,5, dvižna os, strešna ponjava, podest z lestvijo, portalna vrata, žitni drsnik, daljinsko upravljanje. Prodaja izključno pravnim osebam, brez kakršne koli garancije. Možne so napake in vmesna prodaja. Psdpsy N Tpwofx Ai Rjgl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Pgedpfx Asy U Syrei Rol Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Pgedpfx Aijxriu Ej Rol Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering function Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Pgedoy Uqgdepfx Ai Rol Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: rabljeno, lastna masa: 5.880 kg, največja dovoljena obremenitev: 33.120 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, vzmetenje: drugo, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, ABS/EBS Kolutne zavore Zračno vzmetenje Dvigalna os Aluminijasta prekucna korita WZK, podest nevtralno Pgedpoy Nnmqefx Ai Rsl 2x žitni drsniki Portalna vrata Paletna širina Drsna ponjava 6x poliranih aluminijastih platišč Nemško vozilo + dokumenti Poškodovano v nesreči Lokacija v bližini 39120 Magdeburg ... Vzmetenje: zračno - dvižno, rabljeno vozilo, vključno z DDV.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 89 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: bela, Leto izdelave: 2023, Številka objekta # 30572 Cargofloor 10 mm drseča stena pnevmatsko zaklepanje vrat Jost osi disk zavore 2x dvižna os pnevmatike 385/65 R 22,5 nadgradnja (notr.): 13.450 x 2.450 x 2.700 mm portalna vrata pomična ponjava platforma z lestvijo Wabco Smart Board z 212.081 km orodjarna delovna luč stranska zaščita proti podvozu nosilec lestve/metle zaščita zadnjih luči dviganje/spuščanje ABS/EBS Pjdpfx Asx Art Sei Regl Jost podporna stojala Leasing ali financiranje možno na zahtevo!!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2000, skupna dolžina: 10.200 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 385/65 R22,5, Leto izdelave: 2000, Oprema: ABS, = Dodatne možnosti in oprema = Pjdpfx Aioy Ucnyo Rogl - Listnato vzmetenje = Dodatne informacije = Dimenzija pnevmatik: 385/65 R22,5 Znamka osi: ROR Vzmetenje: Parabolično vzmetenje Lastna masa: 5.880 kg Nosilnost: 32.120 kg DGV: 38.000 kg Kiper: Zadnji

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 05/2011, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.150 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Equipment = Pedpfx Aisw S Dfmj Rsgl - EBS = Remarks = Number of axles: 3, unladen weight: 7,340 kg, gross weight: 39,000 kg, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year of manufacture: 2011, side wall material: aluminium, number of sides: 1 side, axle type: MERCEDES-BENZ, 55M3 ALU, COIL = Further Information = General Information: Cabin: Day Registration number: KLEYN1 Driveline: Fuel type: Diesel Transmission: Gearbox: Manual transmission Axle Configuration: Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; tyre tread right: 8 mm Axle 2: Tyre tread left: 14 mm; tyre tread right: 9 mm Axle 3: Tyre tread left: 10 mm; tyre tread right: 7 mm Weights: Unladen weight: 7,340 kg Payload: 31,660 kg Gross vehicle weight: 39,000 kg Environment: Emission class: Euro 0 Condition: Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognisable quality • Competitive pricing • Reliable commercial practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognisable quality' • And more… Visit our website for special offers and complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry through our website. Ask directly about our European warranty package.

Stanje: rabljeno, največja dovoljena obremenitev: 27.910 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2014, Oprema: ABS, Nemška prikolica, 1. lastnik, dobro stanje STAS S 300 ZX Walkingfloor prikolica, CargoFloor tla s kabelskim daljinskim upravljanjem, SAF osi z zavorami na kolutih, 1. os dvižna, portalna vrata z vrtljivim zapahom + pnevmatsko zaklepanje, delovni podest, ponjavnica, 1x plastična orodjarna, nosilec rezervnega kolesa, stopnička zadaj, Wabco SmartBoard, zračno vzmetenje dvig-spust, ABS, EBS, električni priključki 1x 15-polni in 2x 7-polni, itd. Pgodpfoy Ubg Iex Ai Rel Pnevmatike 385 / 65 R 22,5 profil: 14 / 14 / 13 / 11 / 8 / 6 mm Dovoljena skupna masa: 36.000 kg / lastna masa: 8.090 kg / nosilnost: 27.910 kg !!! GOVORIM POLJSKO !!! GOVORIMO ANGLEŠKO !!!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2005, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 40 odstotek, barva: drugo, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Kolutne zavore = Dodatne informacije = Dimenzija pnevmatik: 385/65 Znamka osi: Mercedes Pedpfxsy Uly Eo Ai Rogl Zadnja os 1: Profil pnevmatike: 40% Zadnja os 2: Profil pnevmatike: 30% Zadnja os 3: Profil pnevmatike: 30%

Stanje: rabljeno, največja dovoljena obremenitev: 32.590 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 9.665 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, skupna širina: 2.550 mm, skupna višina: 3.690 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3- osovinska aluminijumska kiper prikolica 52 cbm Erstzulassung 04/2024 Ukupna kilometraža 152.817 km Dimenzije unutrašnjosti (DxŠxV): 9.665 x 2.475 x 2.165 mm Širina za palete Neto težina 6.410 kg Pod potpuno izrađen od 8 mm ALU sa tvrdoćom 110 Brinell Prednji zid 4 mm ALU Bočni zidovi profilisani 3 mm-2 mm, glatka izvedba iznutra i spolja Dvokrilna kombi vrata sa klatnom funkcijom, pneumatsko naknadno otključavanje 2 komada kliznih otvora za žitarice sa 1x vrećom za zaštitu od prašine Ojačana krovna rolo cerada HYVA kip cilindar tip Alpha, pogodan za visok i nizak pritisak Ručno podizanje poluprikolice za punu nosivost SAF osovine sa velikim disk kočnicama, 430 mm 1. osovina podizna osovina WABCO Trailer-EBS sa zaštitom od proklizavanja RSS WABCO Smartboard uređaj za podizanje i spuštanje Pneumatici 385/65 R 22.5 Aluminijumske pristupne merdevine Držač za lopatu i metlu Kutija za alat sa desne strane 4x LED zadnja radna svetla IZNAJMLJIVANJE je nova kupovina, kod nas dostupna i u full-service najmu odmah! Pgedpfjy Dy Hfox Ai Rsl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.613 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 604 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Specification: * Chassis type: moving floor * Kingpin load (national) (t): 12 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Neck height chassis (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11420 * Axles: JOST * Brake type: disc brake * Brake system: JOST - DCA-T7 (Knorr-Bremse) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Traction aid activation via push button in truck * Option: 3rd axle with lift axle and Optiturn, additional lift axle control activated via Wabco Smartboard * Brake pad wear sensor connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * EBS operating console on left side in direction of travel, ahead of the axles * Standard Smartboard * Central air and electrical console with tower * Landing gear: aluminium drop legs * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura-Bright * TPMS sensor type: rim-mounted sensor * TPMS supplier: ZF * Wheel nut covers: chrome with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 units * 2 LED reversing lights at rear left and right behind the axles * 2 LED reversing lights at front left and right in the area of the landing gear * 1 unit inside front wall, driver's side * Lighting unit protection: one-piece fender * LED in door header crossbeam: 2 x 3-function LED * Underrun protection * Mudflap for underrun guard, black, with STAS logo * Operator console for moving floor: left behind the axles * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 3/4" * Hydraulic coupling gender: female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling size: 1" * Hydraulic return coupling gender: female * Hydraulic hose length: 3,000 mm * Hydraulic connection position: front wall * Hydraulic coupling type: standard design * Hydraulic positioning: press return pressure left, return right (CON) * Tool box: plastic * Air connection in tool box * Aluminium access ladder, 2.5 m, extendable * Broom and shovel holder * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door: driver's side * Side wall profile: 3 mm - 2 mm * Moving floor system make: Cargo Floor * Floor system operation: radio remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm smooth, overlapping, aluminium moving floor end plate * Oil temperature sensor for moving floor system * Clean-out partition: aluminium with brushes * Clean-out partition mounting: 6 rollers with bi-directional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall material: aluminium * Impact protection for rear doors: aluminium ramp buffers Pgsdpfx Aiey I Hr Ne Rsl * Number and position of posts: 2 middle posts (centrally and evenly spaced), 1 rear post (at the back) * Curtain pole holder, straight design: 4 units, right side wall * Catwalk/ladder * Catwalk at front wall * Foldable A-sign * Fixed aluminium cover plate between floor and front wall.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.613 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 604 m³, skupna širina: 2.550 mm, Oprema: ABS, Equipment: * Chassis type: moving floor * Kingpin load rating (national) (t): 12 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor semi-trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10,613 * Chassis neck height (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11,420 * Axles: JOST * Brake version: disc brakes * Brake type: JOST - DCA-T7 (Knorr braking system) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Traction aid activation via push button in truck * Option: 3rd axle with lift axle and Optiturn, activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lowering valve * Lowering of air suspension via Smartboard as well as lift/lower valve * Control console for EBS operation on left, ahead of axles * Standard Smartboard * Central air and electrical console with gantry * Landing gears: aluminium drop leg jacks * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura-Bright * TPMS sensor type: rim-mounted * TPMS sensor manufacturer: ZF * Wheel nut caps: chrome with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 pieces * 2x LED reversing lights at rear, left and right, mounted behind axles Pgjdjy I Hr Ajpfx Ai Rol * 2x LED reversing lights at front, left and right, mounted near landing gears * 1x inside on the front wall, direction of travel left * Lighting unit protection: one-piece guard plate * LEDs in rear crossbar: 2 x 3-function LEDs * Underrun protection * Mudflap underrun protection, black with STAS logo * Control console position for moving floor: left, behind axles * Hydraulic coupler: rotary coupling * Hydraulic coupler size: 3/4" * Hydraulic coupler gender: female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling size: 1" * Hydraulic return coupling gender: female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling connection position: on front wall * Hydraulic coupling specification: standard version * Hydraulic functions: pressure left, return right (CON) * Toolbox: plastic * Air connection in toolbox * Aluminium ladder, 2.5 m, extendable * Broom and shovel holder * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door: on left in direction of travel * Side wall profile: 3 mm - 2 mm * Moving floor system make: Cargo Floor * Floor system operation: radio remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm smooth, overlapping with end plate, moving floor aluminium * Oil temperature sensor for moving floor system * Emptying end wall: aluminium with brushes * Emptying end wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall: aluminium * Impact protection rear doors: aluminium dock buffers * Number and position of stanchions: 2 centre stanchions (centre, evenly distributed) and 1 rear stanchion (rear) * Tarpaulin holders, straight version: 4 pieces, right side wall * Catwalk/ladders * Catwalk on front wall * Foldable A-sign