Kässbohrer Avtotransporter nakup rabljenega (133)

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer SLAR3 Extendable Lowloader with Wheel Wells Technical Specifications: Model and Manufacturer: * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable low-bed trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Dimensions: * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm through side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capabilities: * Permissible total weight: - 52,800 kg at 60 km/h Bljdpfx Anex Epaqe Tsl - 48,000 kg at 80 km/h * Dead weight: 12,744 kg ±3% * Axle capacity: 30,000 kg (10 tonnes per axle) * King pin capacity: 18,000 kg Axle Equipment: * Number of axles: 3 (2 fixed front axles, 1 rear steering axle) * Lifting axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Rims: * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre lifespan * Number of rims: 12 pieces (steel rims, offset ET120) Chassis and Suspension: * Suspension: Air suspension with load gauge * Braking system: Dual-line compressed air brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics: * Lighting system: 24V, multi-chamber lights by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connections * Connectors: NATO socket with 2 x 50mm² intermediate cables (3 m length) Ramps: * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Hardwood * Safety: Ramp protection chain included Load Securing: * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity on the gooseneck - 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container locks: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features: * Gooseneck: With 90° vertical corners, stable and durable * Floor: 45 mm thick hardwood and steel floor with anti-slip (droplet) structure * Wheel well bridge: Segmental hardwood bridges with sheet metal supports for closing the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours: * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of the contact surfaces Condition: New and immediately operational. * Perfectly suited for heavy transport and use in construction or machinery relocation.

Stanje: rabljeno, lastna masa: 18.500 kg, največja dovoljena obremenitev: 59.200 kg, skupna masa: 77.700 kg, konfiguracija osi: 3 osi, prva registracija: 10/1978, dolžina tovornega prostora: 9.650 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 1.100 mm, skupna dolžina: 14.200 mm, vzmetenje: jeklo, velikost pnevmatike: 8,25 R 15 PR 18, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: v prihodu / v tranzitu, 6 osi, Kässbohrer osi, listnato vzmetenje, prisilno krmiljenje, pritrdilna ušesa, dvo-delne nakladalne rampe, sprednja opora, dvojne pnevmatike Bedexwa Uyjpfx An Tsll Nadgradnja: širina ramp 600 mm, 1950 mm med rampama, 6 osi (3., 4., 5. in 6. hidravlično prisilno krmiljene), višina sedla 1550 mm obremenjena, kraljevski zatič 3 ½", 6 x 10,55 t osi, skupna dolžina 14.200 mm. Vse informacije brez jamstva, saj je vozilo v prihodu! PODATKI O DODATNI OPREMI BREZ JAMSTVA, pridržane so spremembe, vmesna prodaja in napake!

Stanje: novo, največja dovoljena obremenitev: 37.700 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Kässbohrer Container Chassis NEW | Extendable | 20–45 ft | 3 Axles | from €29,800 New vehicle – individually configurable for your application. Flexible container chassis for professional transport of 20 ft to 45 ft containers. --- Key Features --- • Extendable chassis at front/middle/rear • Suitable for 20, 30, 40 & 45 ft containers • Also suitable for tank containers and high-cube containers • High operational flexibility for freight forwarding and intermodal transport • Lightweight design with robust construction • Container locks are stable and designed for real-world use Blsdeypa N Njpfx An Tsl • Maintenance-friendly structure for daily operations --- Chassis & Safety --- • 3-axle design • Branded axles (BPW / SAF – depending on configuration) • Air suspension with lifting and lowering function • WABCO EBS braking system • TPMS tire pressure monitoring system • LED lighting according to EU regulations Further equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm Bedpfex Efzuox An Toll - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Technical Data: Model and Manufacturer - Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 - Manufacturer: Kässbohrer - Type: Extendable low-bed semi-trailer with excavator recesses, suitable for transporting vehicles and heavy machinery. Dimensions - Overall length: 13,190 mm - Gooseneck length: 3,950 mm - Platform length: 9,240 mm - Extension: 3,500 mm (pe) - Total width: 2,550 mm (expandable by 600 mm with side extensions) - Fifth wheel height: 1,250 mm - Platform height: 875 mm - Ramp length: 2,750 mm - Ramp width: 850 mm - Wheelbase: 7,800 mm - Axle distance: 2,260 mm Weights and Load Capacities Bedpfx Aju Tarpsn Toll - Permissible gross weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h - Tare weight: 12,744 kg ±3% - Axle load capacity: 30,000 kg (10 tonnes per axle) - King pin load capacity: 18,000 kg Axle Equipment - Number of axles: 3 (2 rigid at front, 1 trailing axle at the rear) - Lift axle: Manually raiseable depending on load (1st axle) - Axle material: BPW axles with drum brakes Tyres and Rims - Tyre size: 245/70 R17.5 - Tyre brand: GOODYEAR - Tyre markings: M+S label and 3PMSF marking - Tyre pressure monitoring system: Increases fuel efficiency and tyre life - Number of rims: 12 units (steel rims with offset ET120) Chassis and Suspension - Suspension: Air suspension with load gauge - Braking system: Dual-circuit air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics - Lighting system: 24V, multi-chamber lights from ASPÖCK, LED side marker and rear lights - Coupling type: Standard yellow/red for air supply connection - Electrical connectors: NATO socket with 2 x 50mm² interconnection cables (3 m long) Ramps - Type: Foldable hydraulic loading ramps with sliding mechanism - Capacity: 40 tonnes - Ramp surface: Hardwood - Safety: Ramp protection tension chain included Load Securing - Lashing rings: - 2 x 2 lashing rings, each 5,000 daN capacity - 1 x 2 lashing rings, 10,000 daN capacity on gooseneck - 4 x 2 lashing rings, 6,000 daN capacity in the low bed area - Container lock housing: Suitable for transportation of 1 x 20 FT or 1 x 30 FT containers - Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features - Gooseneck: With 90° vertical corners, stable and durable - Floor: 45 mm thick hardwood floor and steel floor with chequer plate structure - Excavator recess bridge: Bridge consists of hardwood planks with steel supports to cover wheel recesses - Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Paintwork - Chassis: Traffic red (RAL 3020) - Partial metallization of the loading areas Condition: New and ready for immediate use. - Perfectly suited for heavy hauling and use in construction or machinery relocation.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2011, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, velikost pnevmatike: 445/45R19.5, stanje pnevmatik: 30 odstotek, barva: črn, Leto izdelave: 2011, Oprema: ABS, Dimenzija pnevmatik: 445/45R19.5 Zadnja os 1: profil pnevmatik: 30 %; zmanjšanje: enostavno zmanjšano Zadnja os 2: profil pnevmatik: 60 %; zmanjšanje: enostavno zmanjšano Zadnja os 3: profil pnevmatik: 40 %; zmanjšanje: enostavno zmanjšano Lastna teža: 7.650 kg Dovoljena nosilnost: 31.350 kg Največja dovoljena masa: 39.000 kg Strešno okno: da Poškodbe: nobene = Podatki o podjetju = Heisterkamp Used Trucks BV ne prodaja le rabljenih tovornih vozil – smo zanesljiv del Heisterkamp Transportation Solutions. Poskrbimo za rabljena tovorna vozila in prikolice, ki so takoj pripravljena za uporabo. Na naši lokaciji v Oldenzaalu skrbno izbiramo vozila, ki so zanesljiva, ustrezajo današnjim zahtevam in izpolnjujejo visoke standarde naše panoge. Podrobnosti Blodpfx Aszufb Tsn Tsl - Naslov: Hanzepoort 25E, 7575 DB Oldenzaal, Nizozemska - Telefon: - E-pošta: - Spletna stran:

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 380 h, TEHNIČNI OPIS GRADNJE KÄSSBOHRER POWERBULLY 18T S PALFINGER PK 23002 SH E POWER LINK PLUS Opomba: Vozilo je iz proizvodnje 2019/2020, posamezna odobritev/prva registracija izhaja iz leta 2026. SPLOŠNA IZVEDBA - Visokozmogljivo gosenično vozilo za profesionalno uporabo v zahtevnih terenih - Vozilo izdelano na podvozju Kässbohrer PowerBully 18T - Opremljeno s hidravlično nakladalno dvigalko PALFINGER PK 23002 SH E Power Link Plus - Primerno za montažo, dvigovanje in transport v nedostopnih območjih - Uporabno na močvirjih, gozdnih poteh, trasah, gorskih območjih in naravovarstvenih površinah PODVOZJE - Proizvajalec Kässbohrer - Tip PowerBully 18T - Gosenično vozilo s hidrostatičnim pogonom - Cummins B6.7 turbodizelski motor - Moč motorja 231 kW (310 KM) - Emisijski standard EU Stage V - Največja hitrost pribl. 13 km/h - Največja dovoljena masa 30.000 kg - Nizek pritisk na tla zaradi širokih gumijastih gosenic - Možnost obračanja na mestu TERENSKE LASTNOSTI - Plezalna sposobnost do 60 % - Prečna stabilnost do 40 % - Globina brodenja do 1.400 mm - Visok oprijem na mehkih in neurejenih podlagah - Prijazen do občutljivih površin - Optimalno za delo izven utrjenih poti KABINA - Zaščitna kabina ROPS/FOPS - Klimatska naprava - Zračno vzmeten udobni sedež - Elektronsko upravljanje vozila - Terminal na dotik - Kamera za vzvratno vožnjo - LED delovne luči - GPS telemetrija in sistem za upravljanje flot DVIGALNA NAPRAVA Proizvajalec / tip: - PALFINGER PK 23002 SH E Power Link Plus - Hidravlična pregibna nakladalna dvigalka - Neskončno vrtenje - Šeststopenjski hidravlični izteg Podatki o zmogljivosti: - Dvižni moment 21,5 mt (215 kNm) - Največja dvižna moč pribl. 6.200 kg - Največji hidravlični doseg pribl. 17,10 m - Dvižna moč pri največjem iztegu pribl. 890 kg - Precizno pozicioniranje tovora s pomočjo občutljive hidravlike Oprema dvigala: - PALCOM radijsko daljinsko upravljanje - PALTRONIC zaščita pred preobremenitvijo - Sistem HPSC za nadzor stabilnosti - Aktivno dušenje nihanja - Hidravlični vitel - Štiritočkovna podpora - Dodatni hidravlični priključki za priklopna orodja - LED delovna razsvetljava na dvigalu PODROČJA UPORABE - Gradnja daljnovodov in elektro stolpov - Servis vetrnih elektrarn - Gradnja cevovodov - Telekomunikacijski in radijski stolpi - Posebna gozdarska dela - Dela v močvirjih in naravnih rezervatih - Zaščita pred nesrečami in reševanje - Montažna in dvižna dela v težko dostopnih terenih POSEBNE PREDNOSTI - Kombinacija transportnega vozila in zmogljivega nakladalnega dvigala - Izjemno nizek pritisk na tla za občutljive podlage - Visoka nosilnost z odličnimi terenskimi sposobnostmi - Varno delo pri najzahtevnejših pogojih - Gospodarna alternativa mobilnim dvigalom na zahtevnih terenih - Velika prilagodljivost za elektro podjetja, mrežne operaterje in specializirana gradbena podjetja Blodpjzdl R Hefx An Tol POVZETEK Kässbohrer PowerBully 18T z dvigalom PALFINGER PK 23002 SH E Power Link Plus združuje največjo terensko zmogljivost z vrhunsko dvižno tehniko. Zaradi izjemno nizkega pritiska na tla, velike nosilnosti in dosega več kot 17 metrov je stroj posebej primeren za dviganje, montažo in transport na območjih, ki so za običajne tovornjak-žerjave ali gradbene stroje nedosegljiva.

Stanje: rabljeno, največja dovoljena obremenitev: 38.048 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizke izvedbe s hidravličnimi rampami Prva registracija Bjdpfx Asy Eupwen Tell BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 40/45% Skupna masa: 48.000 kg, Lastna masa: 9.952 kg, Nosilnost: 38.048 kg. Dolžina labodjega vratu: 3,95 m Dolžina nizke ploščadi: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje podporne noge Privezni obroči Žepi za kole Pridržujemo si pravico do napak/opisnih napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 31.950 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 30 m³, Oprema: ABS, Kässbohrer STC Chemical Tank Stainless Steel | ADR NEW | insulated | from €104,700 New vehicle – specially designed for the safe transportation of chemical products. Robust stainless steel construction with ADR certification and high-quality insulation. Engineered for demanding chemical and hazardous goods transport operations. Highlights - Stainless steel chemical tank 30 m³ - ADR approved (hazardous goods transport) - Insulated tank with heating channels (steam/water) - BPW axles with air suspension and disc brakes - EBS brake system with electronic stability control - High-quality stainless steel and aluminum components - Tire Pressure Monitoring System (TPMS) according to ECE R141 Technical Data - Total volume: 30,000 liters - Compartments: 1 compartment with baffle walls (7,500-l segments) - Gross weight: 39,000 kg - Unladen weight: approx. 7,050 kg - Axle load: 27,000 kg (3 axles) - Fifth wheel load (king pin): 12,000 kg - Operating temperature: up to 150 °C - Operating pressure: 3.0 bar Bledpfx Asypa H Ujn Tjl - Test pressure: 4.0 bar Standard Equipment - Cylindrical tank made of stainless steel AISI 316Ti - 100 mm glass wool insulation, stainless steel outer cladding - 4 DN 500 manholes with domed trays - Aluminum walkway along the entire tank length - Foldable stainless steel guardrail & safety-compliant access ladder - Heating channels for steam or hot water heating - Pneumatically operated bottom valve DN 80 - BPW axles with disc brakes - KNORR / WABCO EBS 2S/2M with RSS - Electronic air suspension ECAS - LED lighting system (ASPÖCK) Included Options - Tire Pressure Monitoring System (TPMS) - Stainless steel toolbox - ADR equipment incl. warning panels & hazardous goods placards - Aluminum underrun protection side and rear - Hose storage left & right - Fire extinguisher box - Wheel nut covers with Kässbohrer logo Further equipment and individual customization available at any time – we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy-Duty Platform Semi-Trailer – Immediately Available! Technical Data: * Fifth-wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight rating [80 km/h]: 45,000 kg * Gross vehicle weight rating [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Bedperukt Refx An Tell Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45 R 19.5 Frame: * Chassis manufactured from high-grade S700 MC steel, compliant with ISO 1726 * 30 mm hardwood floor with 2 mm Omega-profile reinforcement * 8x2 units of side extensions, adjustable up to 300 mm * Landing gear at the front, foldable supports at the rear Ramp: * Ramp mounts at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container lock pockets (suitable for 1x20 ft, 2x20 ft, 1x40 ft containers) + 2 x 2 pcs. container locks * Steel front wall, 1,500 mm high, with Code XL certificate Accessories: * 1x stainless steel toolbox * Stake storage box Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.750 mm, skupna višina: 3.200 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2019, Oprema: ABS, = Dodatne možnosti in dodatna oprema = Drugo - Dvigalna os Drugo - Os za krmiljenje = Opombe = Šasi Premer spojnega bolta / sedelne sklopke: 2 palca Višina spojnega bolta / vlečne palice: 120 cm Bobnasta zavora: ✓ Posebni transport Dvodelne cestne plošče: ✓ Hidravlične rampe: ✓ Dolžina tovorne površine: 920 cm (1420 cm, podaljšana) Nizkopodna prikolica: ✓ Maksimalna širina: 325 cm Maks. dolžina: 1420 cm Možnost podaljšanja: ✓ Možnost izvlečenja: ✓ = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Znamka osi: Bpwecoplus Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Prednja os 1: Dvojne pnevmatike; profil pnevmatik, levi zunanji rob: 45 %; profil pnevmatik, desni zunanji rob: 45 % Prednja os 2: Dvojne pnevmatike; profil pnevmatik, levi zunanji rob: 30 %; profil pnevmatik, desni zunanji rob: 55 % Srednja os: Dvojne pnevmatike; profil pnevmatik, levi zunanji rob: 25 %; profil pnevmatik, desni zunanji rob: 20 % Zadnja os 1: Dvojne pnevmatike; krmilna; profil pnevmatik, levi zunanji rob: 45 %; profil pnevmatik, desni zunanji rob: 50 % Zadnja os 2: Dvojne pnevmatike; krmilna; profil pnevmatik, levi zunanji rob: 35 %; profil pnevmatik, desni zunanji rob: 35 % Teže Maks. dovoljena masa: 84.000 kg Identifikacija Registrska številka: N2627491 Bledpfx Anozc Eiuj Tjl = Informacije o podjetju = Za več informacij o tej napravi pokličite na: ali pošljite e-pošto na: . Celoten pregled zaloge najdete na: . Prosimo, da se naročite na naše novice, da boste prejemali tedenske posodobitve o naši zalogi.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: Bodpfxewmh H Eo An Toll * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.

Stanje: novo, največja dovoljena obremenitev: 29.600 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 32 m³, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Stainless Steel Tank Semi-Trailer for Bitumen 32m³ Bjdpfx Anor I S H Eo Toll TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR certified for hazardous goods transport * ADR Tank Code: L4BH * Tank diameter: 2,000 mm * Overall length: 11,250 mm * Height: 3,600 mm * Wheelbase (WB): 6,300 mm * Axle spacing (A): 1,310 mm * Rear overhang: 3,580 mm * Fifth-wheel height: 1,220 mm TECHNICAL CAPACITY: * Volume: 32.0 m³ * Tare weight ±3%: 6,400 kg * Axle load: 27,000 kg * King pin capacity: 12,000 kg * Operating temperature: 250 °C * Test pressure: 4.0 bar * Working pressure: 2.0 bar * Total permissible weight: 39,000 kg TANK: * Cylindrical tank body with slope to prevent product residue, made from AISI 321 (DIN 1.4541) stainless steel, ADR code L4BH * Vacuum valve, working pressure 0.21 bar * 1 x thermometer included * Number of compartments: 1 section * Insulation thickness: tank insulated with 100 mm glass wool * Insulation sheathing: aluminum coating, CTP bomb * End wall insulation: front and rear tankheads insulated with fiberglass-reinforced polyester (GRP) * Stainless steel insulation rings fitted along the tank * Number of manholes: 1 * 2" side air pipe in aluminum, right side; rear 2" TW coupling for air pipe included * 1 x pressure gauge included on the side air pipe * Equipped with 1.5" air line for higher bitumen unloading capacity and for cleaning hoses of product residues after unloading * 2" top vent pipe with stainless steel two-way slide valve * Aluminum walkway at tank dome area * Mechanically folding fall protection for walkway as per UVV * Access ladder on right side of tank * Filling dome located at tank front * 4 baffle plates inside the tank DISCHARGE SYSTEM: * Discharge line features DN100 bottom valve with hand wheel operation, compliant with EN 14433 for hazardous goods * Discharge line as per EN 14433: line starts with 4" bottom valve with hand wheel control, for safe unloading with a secondary safety valve (EN 14432-compliant 4" shut-off valve with mechanical control), ends with a 3" TW coupling with female thread and blank cap; between shut-off valve and TW coupling, a 1/2" sample drain valve is included * 1 x 6 m hose carrier in open-top aluminum box design RUNNING GEAR: * BPW axle with air suspension and disc brakes, each axle rated at 9 tons * BPW axles with 22.5" disc brakes * Automatic lift axle system on 1st axle * KNORR-ILVL ECAS electronic air suspension * 385/65 R 22.5" tires, sixfold * Alloy wheels * 1 x work light on the tank * Jost landing gears * 1 x plastic toolbox, 400x480x600 mm OTHER: * ADR plate by Signum, stainless steel, with set of interchangeable numbers, foldable * Fixed hazard placard * Hazard sign No.: 3 * Hazard sign No.: 9 * Temperature placard * Environmental placard * 2 x fire extinguisher boxes (without extinguishers) COLOURS: * Chassis: RAL 3002 Carmine Red * Tank: RAL 9006 White Aluminium + Varnish For further information, please feel free to contact us.

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 380 h, TEHNIČNI OPIS GRADNJE KÄSSBOHRER POWERBULLY 18T S PALFINGER PK 23002 SH E POWER LINK PLUS Opomba: Vozilo je iz proizvodnje 2019/2020, pregled/prva registracija pa iz 2026. SPLOŠNA IZVEDBA • Visoko zmogljivo gosenično vozilo za profesionalno uporabo v zahtevnih terenih • Nadgradnja na šasijo Kässbohrer PowerBully 18T • Opremljeno s hidravlično nakladalno dvigalko PALFINGER PK 23002 SH E Power Link Plus • Primerno za montažna, dvižna in transportna dela na zahtevnem terenu • Uporabno na barjih, gozdnih poteh, trasah, gorskih območjih in na naravovarstvenih površinah ŠASIJA • Proizvajalec Kässbohrer • Tip PowerBully 18T • Gosenično vozilo s hidrostatičnim pogonom • Cummins B6.7 turbodiesel motor • Moč motorja 231 kW (310 KM) • Emisijski standard EU Stage V • Maksimalna hitrost pribl. 13 km/h • Največja dovoljena masa 30.000 kg • Nizek pritisk na podlago zaradi širokih gosenic iz gume • Obračanje na mestu možno TERENSKE LASTNOSTI • Plezalna sposobnost do 60 % • Prečna nagiba do 40 % • Globina brodenja do 1.400 mm • Visoka oprijemljivost na mehkih in neutrjenih podlagah • Neškodljiva uporaba na občutljivih tleh • Optimalno za dela izven utrjenih cest VOZNIŠKA KABINA • Varnostna kabina v izvedbi ROPS/FOPS • Klimatska naprava • Komaseden sedež z zračnim vzmetenjem • Elektronski nadzor vozila • Upravljalni terminal na dotik • Kamera za vzvratno vožnjo • LED delovne luči • GPS telemetrija in sistem za upravljanje voznega parka DVIGALO Proizvajalec / Tip • PALFINGER PK 23002 SH E Power Link Plus • Hidravlična pregibna nakladalna dvigalka • Neskončen vrtljivi mehanizem • Hidravlični šeststopenjski izteg Podatki o zmogljivosti • Dvižni moment 21,5 mt (215 kNm) Bledpfezdl R Tsx An Tjl • Največja dvižna sila pribl. 6.200 kg • Največji hidravlični doseg pribl. 17,10 m • Dvižna sila pri maksimalnem iztegu pribl. 890 kg • Precizno pozicioniranje tovora z občutljivim hidravličnim upravljanjem Oprema dvigala • PALCOM radijsko daljinsko upravljanje • PALTRONIC zaščita pred preobremenitvijo • HPSC nadzor stabilnosti • Aktivno dušenje nihanja • Hidravlični vitel • Štiritonska podpora • Dodatni hidravlični priklopi za priključke • LED delovna razsvetljava na dvigalu PODROČJA UPORABE • Gradnja daljnovodov in električnih drogov • Servis vetrnih elektrarn • Gradnja cevovodov in vodovodov • Gradnja telekomunikacijskih in radijskih stolpov • Specialna gozdarska dela • Dela na barjih in v naravnih rezervatih • Zaščita pred katastrofami in reševalne akcije • Montažna in dvižna dela na nedostopnih terenih POSEBNE PREDNOSTI • Kombinacija transportnega vozila in zmogljivega nakladalnega dvigala • Zelo nizek pritisk na tla za občutljive podlage • Visoka nosilnost ob hkrati izrednih terenskih sposobnostih • Varnost pri delu tudi v najzahtevnejših pogojih • Ekonomska alternativa mobilnim žerjavom v težko dostopnem terenu • Velika prilagodljivost za energetska podjetja, upravljavce omrežij in podjetja za specialna geotehnična dela POVZETEK Kässbohrer PowerBully 18T z nadgrajenim dvigalom PALFINGER PK 23002 SH E Power Link Plus združuje največjo terensko zmogljivost z visoko zmogljivo dvižno tehniko. Zaradi izredno nizkega pritiska na tla, velike nosilnosti in dosega več kot 17 metrov je stroj posebej primeren za dvižna, montažna in transportna opravila na območjih, ki so z običajnimi tovornimi dvigali ali gradbenimi stroji nedosegljiva.

Stanje: novo, največja dovoljena obremenitev: 24.855 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter Available Immediately TECHNICAL DATA: * Overall length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm * Saddle height: 1,000 mm * Axle load: 24,000 kg * Kingpin capacity: 12,000 kg * Unladen weight ±%3: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * BPW brand axles with technical capacity of 9,000 kg, air suspension, and drum brakes * Rear axle self-steering * First axle liftable * Wabco brake system * 12x 205/65 R17.5 tyres FRAME: * Made from high-strength steel * Front ramps: 2 pcs, 3,800 mm long, hydraulically folding and sliding, galvanized ramps (max. 1,000 mm extension, angle between 2° and 15°), load capacity 7 t * Center ramps: 2 pcs, 1,200 mm long, hydraulically folding, galvanized ramps (angle between 0° and 44°), load capacity 7 t * Front axle ramp: 1 pc, 4,000 mm long, hydraulically folding, galvanized ramp (angle between 0° and 29°), load capacity 7 t * Loading ramps: For loading vehicles onto the truck transporter, 2 aluminium loading ramps, each 2000 x 400 x 75 mm (L x W x H), with a capacity of 3.5 tonnes are available. Ramp angle is 10° with closed rear bumper and 8° with extended bumper * Wheel recess, size 800 x 460 x 70 mm * Vehicle extension type: 1,800 mm, in steps of 300 mm Bljdpfxsumzz To An Tsl LOAD SECURING: * Lashing rings: 1 x 2 pcs with 8 tonnes load capacity at gooseneck, 2 x 2 pcs with 8 tonnes at front ramp, and 2 x 2 pcs with 8 tonnes at rear section OTHER FEATURES: * Aluminium toolbox 400 x 300 x 500 mm * Chassis colour: RAL 3020 traffic red, galvanized For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 33.380 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Kässbohrer SPJ 3 Platform Semi-Trailer — Versatile | Robust | from €35,500 New vehicle — Individually configurable for your specific application. Robust platform semi-trailer designed for universal transport of various goods. Engineered for high payload, durable construction and maximum operational practicality. Highlights - Universal platform semi-trailer - High payload with stable frame construction - BPW axles with air suspension - EBS braking system with stability control - Versatile lashing and securing options - Ideal for construction, industrial, machinery, and general cargo transport Technical Data - Axles: 3 axles - Gross weight: 39,000 kg - Axle load: 27,000 kg - Fifth-wheel load: 12,000 kg - Platform length: depending on specification - Speed: 80 km/h - Chassis: air suspension with lifting/lowering function Standard Equipment - High-strength steel frame construction - Platform floor designed for high point and area loads Bjdpfjypa Daex An Tsll - Multiple lashing points for load securing - BPW axles with drum brakes - WABCO / KNORR EBS brake system (2S/2M) - Electronic air suspension - LED lighting system according to EU regulations - Rear underrun protection as per ECE Included Options - Spare wheel holder - Toolbox - Side underrun protection - Lashing rings / points as required - Warning signs and reflectors in compliance with EU regulations - Preparation for additional superstructures or special solutions Additional equipment and individual customizations always possible — we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary by configuration.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2025, skupna dolžina: 8.140 mm, skupna širina: 2.550 mm, skupna višina: 1.200 mm, velikost pnevmatike: 385/65R22.5, stanje pnevmatik: 80 odstotek, barva: črn, Leto izdelave: 2025, Oprema: ABS, Dimenzije pnevmatik: 385/65R22.5 Globina profila pnevmatik: 80 % Zadnja os 1: Redukcija: enostavna redukcija Zadnja os 2: Redukcija: enostavna redukcija Zadnja os 3: Redukcija: enostavna redukcija Lastna teža: 3.310 kg Dovoljena nosilnost: 35.690 kg Največja dovoljena masa: 39.000 kg Poškodbe: nobene = Informacije o podjetju = Heisterkamp Used Trucks BV ne prodaja le rabljenih tovornih vozil – smo zanesljiv del Heisterkamp Transportation Solutions. Skrbimo za rabljena tovorna vozila in prikolice, ki so takoj pripravljena za uporabo. Na naši lokaciji v Oldenzaalu skrbno izbiramo vozila, ki so zanesljiva, ustrezajo današnjim zahtevam in izpolnjujejo visoke standarde naše panoge. Podrobnosti: - Naslov: Hanzepoort 25E, 7575 DB Oldenzaal, Nizozemska - Telefon: - E-pošta: Bsdpfxjzvymyo An Tsll - Spletna stran:

Stanje: novo, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 50 m³, Oprema: ABS, Kässbohrer Tipping Silo Semi-Trailer NEW | 40–60 m³ | Aluminium | Food-Grade | from €65,900 New vehicle – individually configurable to suit your application. Silo semi-trailer for bulk goods – available for either industrial or food applications. Several volume options available (40 / 45 / 50 / 60 m³) – we will advise you based on your specific requirements. --- Highlights - Aluminium tipping silo, robust lightweight construction - Volume options: 40 / 45 / 50 / 60 m³ - Food-grade design optionally available (e.g. for flour, animal feed) - Tiltable tank with DN700 discharge cone - Internally ground weld seams - BPW axles with air suspension & disc brakes - WABCO / KNORR EBS braking system - Non-slip catwalk with folding safety rail Bljdpeypa Raefx An Tel - High-quality corrosion protection & long-lasting paint finish --- Technical Data - Gross weight: 39,000 kg - Unladen weight: approx. 5,200 kg (±3%) - Axle load: 27,000 kg - Fifth wheel load: 12,000 kg - Tank diameter: approx. 2,530 mm - Vehicle height: approx. 4,000 mm - Saddle height: approx. 1,220 mm - Operating temperature: –20 °C to +80 °C - Operating pressure: 2.0 bar --- Standard Equipment - Aluminium tank with ground internal welds - 3 manholes DN450 - DN700 stainless steel discharge cone with fluidisation - Stainless steel mixing manifold with brass valves - Upper & side air pipes made from aluminium - Non-slip aluminium catwalk with folding fall protection - Aluminium access ladder in compliance with UVV regulations - BPW axles with air suspension & disc brakes - Lift axle (EBS-controlled) - Electronic air suspension (ECAS) - LED lighting (Aspöck) - JOST landing legs - Side and underrun protection in accordance with ECE --- Included Options / Special Equipment - Food-grade version available - Vacuum & non-return valves made of brass - Hose carriers on both sides (DN200) - Hydraulic tipping system (oil supply via tractor unit) - Load monitoring pressure gauge - Toolbox - Aluminium underrun protection (tiltable) - Side protection in aluminium - Reflective stripes as per ECE - Wheel nut covers with “K” logo --- Further equipment and customised solutions available at any time – we configure your vehicle exactly to your specifications. Sample photo. Actual equipment may vary depending on configuration.

Stanje: rabljeno, lastna masa: 6.450 kg, največja dovoljena obremenitev: 29.550 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, dolžina tovornega prostora: 7.720 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.460 mm, prostornina tovornega prostora: 27 m³, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 4.900 mm, Leto izdelave: 2020, Lastna teža: 6.450 kg, Skupna dovoljena masa (GVW): 36.000 kg, Nakladalna površina (D x Š x V): 7.720 mm x 2.450 mm x 1.460 mm. Dimenzija pnevmatik: 385/65 R22.5, Prostornina nakladalnega prostora: 27 m³. 1. os: , 2. os: , 3. os:. Pregled vseh razpoložljivih vozil najdete na naši spletni strani. Potrebujete financiranje? Nudimo individualne finančne rešitve, pogodbe za popolno storitev in telematske storitve. Z veseljem vam svetujemo osebno. Bodpfey S Er Ajx An Tell

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 10/2008, skupna dolžina: 11.510 mm, skupna širina: 2.550 mm, medosna razdalja: 7.500 mm, barva: drugo, Leto izdelave: 2008, Zadnja os 1: Dvižna os; Največja dovoljena masa osi: 9.000 kg Zadnja os 2: Največja dovoljena masa osi: 9.000 kg Lastna teža: 6.200 kg Nosilnost: 26.800 kg Skupna dovoljena masa: 33.000 kg Bledpfxjyzipkj An Tel Tehnično stanje: dobro Optično stanje: dobro Poškodbe: manjša poškodba Registrska številka: OK-16-FX

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x trailing steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load pressure gauge FRAME: Made from high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners Bljdpfx Aew Ii A Aen Tjl * Jost landing legs at the front * Foldable supports at the rear * Grated floor RAMP: * Ramp capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height when closed * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck with 6-ton capacity, 6x2 on platform with 6-ton capacity, 8x2 on the outer frame with 6-ton capacity * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light * 2x2 oversize signs with lighting * SmartBoard For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg Bledjw Nlzqspfx An Tjl CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy Duty Platform Semi-Trailer Immediately Available! Technical Specifications: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Technical Gross Weight [80 km/h]: 45,000 kg * Technical Gross Weight [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * 3rd axle as trailing steering axle * Wabco braking system * Tyres: 445/45/R 19.5 Frame: * Chassis made of high-quality, high-strength S700 MC steel according to ISO 1726 * 2 mm omega-profile reinforced 30 mm hardwood floor * 8x2 units of side extensions, extendable up to 300 mm * Landing gear at the front, folding supports at the rear Ramp: * Ramp receptacles at the rear of the vehicle * Ramp storage box at the rear Load Securing: * Lashing rings * Stake pockets * 6 x 2 units container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 units container locks * Front bulkhead made of steel, height 1,500 mm, with Code-XL certificate Accessories: * 1x stainless steel toolbox Blsdpfx Anerukuco Tol * Stake box Chassis color: RAL 3020 Traffic Red Please feel free to contact us for further information.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform semi-trailer available immediately! Technical Data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Gross technical weight [80 km/h]: 45,000 kg * Gross technical weight [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Running Gear: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * Wabco braking system * 445/45/R 19.5 tyres Chassis: * Frame made of high-quality, high-strength S700 MC steel, according to ISO 1726 * 2 mm omega-profile reinforced 30 mm hardwood floor * 8x2 sections of side extensions, extendable up to 300 mm * Support winch at front, foldable support legs at rear Ramp: * Ramp mounts at the rear of the vehicle * Rear ramp storage box Load Securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. container) + 2 x 2 pcs. container locks * Bulkhead made of steel material, 1,500 mm high, with Code XL certificate Accessories: * 1x stainless steel toolbox Bjdpfjrukursx An Tell * Stake box Chassis colour: RAL 3020 Traffic Red For more information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 29.831 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Mega Platform Semi-Trailer Immediately Available TECHNICAL DATA: * K.SFS M / 90 - 12 / 27 DE * Fifth Wheel Height: 950 mm * Kingpin Capacity: 15,000 kg Bedpfsr Ivwvox An Tjll * Axle Load: 27,000 kg * Gross Vehicle Weight: 42,000 kg * External Length: 13,680 mm * Internal Length: 13,610 mm * Overall Width: 2,550 mm * Internal Width: 2,480 mm * Wheelbase: 7,700 mm * Gooseneck Height: 90 mm * Unladen Weight ±%3: 6,169 kg CHASSIS: * Manufactured from high-quality, high-strength S460 MC steel * KTL-coated and painted * K-Fix (Lashing holes on the outer frame; load capacity 2.5 tonnes) * 3 x 9-tonne BPW EAC (ECO Air Compact) axles with disc brakes * 1st axle liftable, automatic * Wabco braking system * Air suspension with lifting and lowering valve * 6 x 445/45 R19.5 tyres * JOST mechanical landing gears * 30 mm phenolic resin-coated plywood floor with 8,000 kg forklift axle load capacity according to EN 283 * KTL-coated steel front wall with internal plywood protection, 2,000 mm height ADDITIONAL EQUIPMENT: * Front wall height 2,000 mm * 1 x steel toolbox with PVC coating, 1,500 mm wide, positioned in front of axles * 2 x 4 RoRo rings according to EN 29367-2 * 13 x 2 lashing rings with 2-ton capacity in floor, and 7 x 2 lashing rings with 5-ton capacity in side frame * 7 x 2 stake pockets on outer frame and 5 stake pockets centrally * Additionally 2 x 2 stake pockets at the front * 4 x 2 container twistlocks for transporting 1 x 40 ft. or 2 x 20 ft. containers * Oversized load signs (LED) * 7 x 2 lashing points on the outer frame with 1 t capacity * Stake storage box on front wall COLOURS: * Chassis colour: RAL 3020 Traffic Red * Front wall colour: RAL 3020 Traffic Red For further information, feel free to contact us.