Cisterna polpriklopnik

KÄSSBOHRER Tankauflieger K.STN L 30

Kässbohrer K.STN L 30 Stainless Steel Tank Semi-Trailer 30 m³ for Slurry

TECHNICAL INFORMATION:
- Overall length: 9,180 mm
- Height (empty vehicle): 3,960 mm
- Wheelbase: 5,000 mm
- Rear overhang: 3,050 mm
- Fifth wheel height: 1,320 mm
- Tank diameter: 2,200 mm

TECHNICAL DATA:
- Volume: 30.0 m³
- Unladen weight: 6,045 kg
- Axle load capacity: 27,000 kg
- King pin load capacity: 12,000 kg
- Operating temperature: 80°C
- Test pressure (+H Bar): 0.5 bar
- Gross vehicle weight: 39,000 kg

TANK:
- Cylindrical tank body with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel
- Number of manholes: 1 pc.
- Manhole size DN450, 4-bolt fastener with hinged dome cover
- Aluminum walkway
- Access ladder on the left side of the tank
- 1 x 5 m hose storage, top-open large aluminum box
- Straight flange pre-installed for cleaning pipe
- 1 x 8" pipe with flange at the rear top of the tank for suction/discharge
- 1 x 8" pipe with square flange front right for installation of a fill level indicator
- 6" connection for vent line prepared
- Preparation for pressure valve
- Preparation for vacuum valve & vacuum

Hjdeun Em Njpfx Ab Dju
DISCHARGE SYSTEM:
- At the rear, a transparent hard plastic pipe (4" diameter) allows the fill level to be read from outside
- 1 x 8" plastic filling funnel in front of the suction pipe at the rear top of the tank
- Börger FL1036 hydraulic pump with carbon steel housing
- For discharge by pump, a 6" Perrot coupling with hook closure, as standard for slurry tankers, is fitted to the discharge pipe
- The discharge outlet is fitted with a manually operated 6" brass gate valve
- At the inlet of the mixing line inside the tank, 1 x 4" pneumatically operated shut-off gate valve; 1 x pneumatically operated 8" brass gate valve at the suction line inlet
- 1 x pneumatically operated 6" brass vent valve
- When discharging with the pump, a 6" swivel joint allows directing the discharge outlet at the vehicle rear to left, right, or center
- 2 x 6" pneumatically operated gate valves

CHASSIS:
- Chassis made from special aluminum alloy ensuring high quality and strength
- BPW axles, 3 x 9 tons, with air suspension and disc brakes
- 1st axle liftable
- Aluminum landing legs
- Tyres: 385/65 R 22.5"
- Aluminum rims
- KNORR-ILVL electronic air suspension ECAS

MISCELLANEOUS:
- 1 bracket for pump connection, welded to the frame
- Underrun protection in accordance with regulations

COLORS:
- Chassis: MB 7350 Nova Grey (glossy)
- Tank: RAL 9005 Black

Tank painted BLACK.

Photos may show differing equipment.
Only the specifications listed in the build description are binding!

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.